Method for producing nanomaterials in the plasma of a low-pressure pulsed arc discharge

A new method for the production of nanomaterials in the plasma of a low-pressure arc discharge is developed and experimentally studied. This method can be used to synthesize nanoparticles 5–10 nm in size with a narrow size distribution. In this method, a low-pressure arc discharge is used to melt a material, to disperse the molten material, to deliver liquid material droplets to the plasma, to cool the liquid nanoparticles forming in the plasma up to their solidification, and to deposit the solidified nanoparticles onto a substrate.     

Formation of Si nanowires by the electrochemical reduction of porous Ni/SiO2 blocks in molten CaCl2

Silicon nanowires (SiNWs) were prepared by the electrochemical reduction of solid Ni/SiO₂ blocks in molten CaCl₂ at 1173 K. The SiNWs have diameter distributions ranging from 80 to 350 nm, and the nickel–silicon droplets are found on the tips of the nanowires. The growth mechanism of SiNWs was investigated, which confirmed that the nano-sized nickel–silicon droplets formed at the Ni/SiO₂/CaCl₂ three-phase interline. The droplets lead to the oriented growth of SiNWs. Formation of nano-sized nickel–silicon droplets suggests that this method could be a potential way to produce nano-sized metal silicides.     

Surface status and size influences of nickel nanoparticles on sulfur compound adsorption

Metallic nickel nanoparticles were incorporated on mesoporous silica to remove sulfur compounds in diesel selectively. In the first method, nickel nanoparticles were formed on mesoporous silica SBA-15 by impregnation and subsequent reduction of nickel nitrate. The sulfur adsorption capacity was strongly dependent on the nickel loading and the average nickel particle size. In the second method, nickel nanoparticles were synthesized in solution in the presence of a capping agent and then incorporated in mesoporous silica MCF by sonication. Although these particles maintain their sizes on the MCF surface after heat treatment, capping agent remaining on the Ni particle surface might interfere the adsorption of sulfur compounds.     

Microstructure and magnetooptics of silicon oxide with implanted nickel nanoparticles

Metallic nickel nanoparticles of various sizes are formed in a thin near-surface layer in an amorphous SiO₂ matrix during 40-keV Ni⁺ ion implantation at a dose of (0.25−1.0) × 10¹⁷ ions/cm². The micro-structure of the irradiated layer and the crystal structure, morphology, and sizes of nickel particles formed at various irradiation doses are studied by transmission electron microscopy and electron diffraction. The magnetooptical Faraday effect and the magnetic circular dichroism in an ensemble of nickel nanoparticles are studied in the optical range. The permittivity [^(e)]\hat \varepsilon tensor components are calculated for the implanted samples using an effective medium model with allowance for the results of magnetooptical measurements. The spectral dependences of the tensor [^(e)]\hat \varepsilon components are found to be strongly different from those of a continuous metallic nickel film. These differences are related to a disperse structure of the magnetic nickel phase and to a surface plasma resonance in the metal nanoparticles.     

Surface morphology and electrocatalytic properties of nickel nanoparticles formed in track pores

Structures, each of which is composed of a conducting substrate with a protective dielectric layer containing an array of equal-sized pores formed under the action of high-energy ions and chemical etching, are created. The created pores are electrochemically filled with nickel nanoparticles. With atomic-force microscopy (AFM), it is established that Ni nanoparticles are generated exclusively within ion tracks without film formation on the surface of a silicon-dioxide layer. Histograms illustrating the nanoparticle-diameter distribution are constructed, and areas of the nickel nanoparticles are calculated. The electrochemical and electrocatalytic properties of Ni nanoparticles inherent to ethanol-oxidation reactions are investigated. The catalytic activity per unit area of the nanocatalyst is estimated using voltammograms, AFM data, and histograms characterizing the particle size distribution.     

Interaction of Gaseous Reagents on Gold and Nickel Nanoparticles

The adsorption and interaction of hydrogen, carbon monoxide, and oxygen with gold and nickel nanoparticles is studied by scanning tunneling microscopy and spectroscopy. It is established that the HCO radical is formed on gold nanoparticles by the reaction between adsorbed H₂ and CO, which is subsequently oxidized by oxygen to water and CO₂. At the same time, after exposure to H₂ and CO, nickel nanoparticles coated with oxide are reduced. The formation of adsorbed HCO on such nanoparticles is not observed.     

Thermal Oxidation of a Carbon Condensate Formed in High-Frequency Carbon and Carbon–Nickel Plasma Flow

We have reported on the comparative characteristics of thermal oxidation of a carbon condensate prepared by high-frequency arc evaporation of graphite rods and a rod with a hollow center filled with nickel powder. In the latter case, along with different forms of nanodisperse carbon, nickel particles with nickel core–carbon shell structures are formed. It has been found that the processes of the thermal oxidation of carbon condensates with and without nickel differ significantly. Nickel particles with the carbon shell exhibit catalytic properties with respect to the oxidation of nanosized carbon structures. A noticeable difference between the temperatures of the end of the oxidation process for various carbon nanoparticles and nickel particles with the carbon shell has been established. The study is aimed at investigations of the effect of nickel nanoparticles on the dynamics of carbon condensate oxidation upon heating in the argon–oxygen flow.     

In situ nanoparticle size measurements of gas-borne silicon nanoparticles by time-resolved laser-induced incandescence

This paper describes the application of time-resolved laser-induced incandescence (TiRe-LII), a combustion diagnostic used mainly for measuring soot primary particles, to size silicon nanoparticles formed within a plasma reactor. Inferring nanoparticle sizes from TiRe-LII data requires knowledge of the heat transfer through which the laser-heated nanoparticles equilibrate with their surroundings. Models of the free molecular conduction and evaporation are derived, including a thermal accommodation coefficient found through molecular dynamics. The model is used to analyze TiRe-LII measurements made on silicon nanoparticles synthesized in a low-pressure plasma reactor containing argon and hydrogen. Nanoparticle sizes inferred from the TiRe-LII data agree with the results of a Brunauer–Emmett–Teller analysis.     

Formation of ZnO,MgO and NiO Nanoparticles from Aqueous Droplets in Flame Reactor

Nanoparticles of ZnO, MgO and NiO were produced from droplets of aqueous salt solution in the flame spray pyrolysis reactor. Conventional spray pyrolysis, in which electrical furnace reactor is used, is reported to produce nanoparticles only from acetate precursor. If the reactor pressure is low (60torr), nitrate salt precursor is also known to produce nanoparticles. In this paper, we report that nanoparticles are produced from nitrate as well as acetate salt precursor solution when propane–oxygen diffusion flame is used to decompose aqueous aerosol droplets. At low flame temperature, however, nanoparticles are not formed and the particle morphology is similar to the morphology produced by the conventional spray pyrolysis. At high flame temperature, nanoparticles are formed, regardless of the salt type. Nanoparticles are formed at lower flame temperature from acetate salts than from nitrate salts. All nanoparticle prepared in this work were fully crystallized and the size measured from transmission electron microscopy images was 30nm. This size agreed well with the particle size calculated from X-ray diffraction and specific surface area data.     

Inhibition effect of self-assembled films formed by gold nanoparticles on iron surface

The self-assembled (SA) films formed by gold nanoparticles on iron surface had been proved to have inhibition effect for the substrate in 0.5 M H₂SO₄ solutions. The inhibition action was investigated using electrochemical impedance spectroscopy (EIS). The SA films formed by gold nanoparticles protected with sodium oleate had better corrosion protection to the iron substrate than only by sodium oleate. Scanning electron microscopy (SEM) was used to observe the imagines of the SA films. In addition, it was found that the gold nanoparticles could influence the nickel electroless plating films on the iron substrate. The structure and composition of the plating films were test by electron probe microanalyzer (EPMA). The mechanisms of the formation of the SA films and the nickel electroless plating reaction were also discussed.     

Laser synthesis and magnetic properties of monodispersed core–shell nanoparticles

This paper presents a method for fabricating size-selected nickel nanoparticles coated with oxide shells (shell thickness of about 2 nm). The size of the generated particles was controlled by a low-pressure differential mobility analyzer. The total mass of the deposited particles was estimated on the basis of their measured electric current. A high-resolution transmission electron microscope was used to observe the morphologies of the particles. We successfully synthesized a series of monodispersed (geometric standard deviation <1.2) core–shell particles with oxidized surface layers of 2 nm and analyzed their magnetic properties. PACS 75.50.Te; 75.30.Gw; 75.70.Cn     

Synthesis,structure, and magnetic properties of iron and nickel nanoparticles encapsulated into carbon

Nanocomposites based on iron and nickel particles encapsulated into carbon (Fe@C and Ni@C), with an average size of the metal core in the range from 5 to 20 nm and a carbon shell thickness of approximately 2 nm, have been prepared by the gas-phase synthesis method in a mixture of argon and butane. It has been found using X-ray diffraction, transmission electron microscopy, and Mössbauer spectroscopy that iron nanocomposites prepared in butane, apart from the carbon shell, contain the following phases: iron carbide (cementite), α-Fe, and γ-Fe. The phase composition of the Fe@C nanocomposite correlates with the magnetization of approximately 100 emu/g at room temperature. The replacement of butane by methane as a carbon source leads to another state of nanoparticles: no carbon coating is formed, and upon subsequent contact with air, the Fe₃O₄ oxide shell is formed on the surface of nanoparticles. Nickel-based nanocomposites prepared in butane, apart from pure nickel in the metal core, contain the supersaturated metastable solid solution Ni(C) and carbon coating. The Ni(C) solid solution can decompose both during the synthesis and upon the subsequent annealing. The completeness and degree of decomposition depend on the synthesis regime and the size of nickel nanoparticles: the smaller is the size of nanoparticles, the higher is the degree of decomposition into pure nickel and carbon. The magnetization of the Ni@C nanocomposites is determined by several contributions, for example, the contribution of the magnetic solid solution Ni(C) and the contribution of the nonmagnetic carbon coating; moreover, some contribution to the magnetization can be caused by the superparamagnetic behavior of nanoparticles.     

Production of cobalt and nickel particles by hydrogen reduction

Cobalt and nickel nanoparticles were produced by hydrogen reduction reaction from cobalt or nickel chloride precursor vapour in nitrogen carrier gas. This aerosol phase method to produce nanoparticles is a scalable one-step process. Two different setups were introduced in particle production: a batch type reactor and a continuously operated reactor. Common feature in these setups was hydrogen mixing in a vertical flow reactor. The process was monitored on-line for particle mass concentration and for gas phase chemical reactions. Tapered element oscillating microbalance measured the particle mass concentration and Fourier transform infrared spectroscopy was used to monitor relevant gas phase species. The produced cobalt and nickel particles were characterised using transmission electron microscopy and x-ray diffraction. The produced cobalt and nickel particles were crystalline with cubic fcc structure. Twinning was often observed in cobalt particles while nickel particles were mostly single crystals. The cobalt particles formed typically long agglomerates. No significant neck growth between the primary particles was observed. The primary particle size for cobalt and nickel was below 100 nm.     

Synthesis of nickel nanoparticles in silica by alcogel electrolysis

We report a novel technique for the formation of metal nanoparticles, based on electrolysis of the alcogels containing metal chlorides. The alcogel was formed from TEOS, water, ethanol, and nickel chloride, and subjected to galvanostatic electrolysis. This resulted in successful formation of Ni nanoparticles inside the silica gel. Average particle size of FCC Ni lies between 18 and 20 nm. The formation of tetragonal nickel (a sub-oxide of nickel) as well as NiO were also detected by XRD and SAED. The resistivity measurements showed that the nickel nanoparticles were separated from each other by Ni(O) present between them. Magnetic studies based on ZFC and FC measurements below room temperature (up to 5 K) and above room temperature (up to 700 K) were conducted using SQUID and Magnetic TGA, respectively, which showed strong magnetic irreversibility as attributable to exchange interaction between metallic and oxide phases and mutual interactions among metallic particles in the network structure. The blocking temperature (~600 K) of the samples was above room temperature. M–H studies based on VSM showed an increase in magnetic coercivity with the formation of NiO. A magnetic transition associated with tetragonal nickel was seen at 10 K.     

Synthesis and characterization of carbon coated nanoparticles produced by a continuous low-pressure plasma process

Core–shell nanoparticles coated with carbon have been synthesized in a single chamber using a continuous and entirely low-pressure plasma-based process. Nanoparticles are formed in an argon plasma using iron pentacarbonyl Fe(CO)₅ as a precursor. These particles are trapped in a pure argon plasma by shutting off the precursor and then coated with carbon by passing acetylene along with argon as the main background gas. Characterization of the particles was carried out using TEM for morphology, XPS for elemental composition and PPMS for magnetic properties. Iron nanoparticles obtained were a mixture of FeO and Fe₃O₄. TEM analysis shows an average size of 7–14 nm for uncoated particles and 15–24 nm for coated particles. The effect of the carbon coating on magnetic properties of the nanoparticles is studied in detail.     

Strong green luminescence of Ni2+-doped ZnS nanocrystals

ZnS nanoparticles doped with Ni²⁺ have been obtained by chemical co-precipitation from homogeneous solutions of zinc and nickel salt compounds, with S^2- as precipitating anion, formed by decomposition of thioacetamide (TAA). The average size of particles doped with different mole ratios, estimated from the Debye–Scherrer formula, is about 2–2.5 nm. The nanoparticles could be doped with nickel during synthesis without altering the X-ray diffraction pattern. A Hitachi M-850 fluorescence spectrophotometer reveals the emission spectra of samples. The absorption spectra show that the excitation spectra of Ni-doped ZnS nanocrystallites are almost the same as those of pure ZnS nanocrystallites (λ_ex=308–310 nm). Because a Ni²⁺ luminescent center is formed in ZnS nanocrystallites, the photoluminescence intensity increases with the amount of ZnS nanoparticles doped with Ni²⁺. Stronger and stable green-light emission (520 nm) (its intensity is about two times that of pure ZnS nanoparticles) has been observed from ZnS nanoparticles doped with Ni²⁺. Received: 18 December 2000 / Accepted: 17 March 2001 / Published online: 20 June 2001     

Properties of pulsed laser deposited nanocomposite NiO:Au thin films for gas sensing applications

Nanocomposite thin films formed by gold nanoparticles embedded in a nickel oxide matrix have been synthesized by a new variation of the pulsed laser deposition technique. Two actively synchronized laser sources, a KrF excimer laser at 248 nm and an Nd:YAG laser at 355 nm, were used for the simultaneous ablation of nickel and gold targets in oxygen ambient. The structural, morphological, and electrical properties of the obtained nanocomposite films were investigated in relation to the fluence of the laser irradiating the gold target. The nanocomposite thin films were tested as electrochemical hydrogen sensors. It was found that the addition of the gold nanoparticles increased the sensor sensitivity significantly.     

低压汽轮机三维叶栅通道内湿蒸汽两相流动的数值模拟与分析

采用完全气体单相流动模型、实际气体平衡态凝结和非平衡态自发凝结三种不同的计算方法对某低压汽轮机静叶栅中三维湿蒸汽两相流动进行了模拟和分析.计算表明:三种模式计算结果有一定的差别;水滴的生长过程对出口气流角分布有一定的影响;非平衡态计算得到的出口湿度比平衡态计算结果略微小一些;进一步的分析表明在非平衡态计算中,进口水滴半径对出口湿度和出口水滴半径均有影响.     

Second harmonic generation from closed packed hexagonal structure of nano-nickel arrays

A closed packed hexagonal structure of nickel nanoparticles was fabricated by deposition of thin nickel films on self-assembled polystyrene micron spheres, which were made of nanospherical lithography in conjunction with left-off the micro spheres. The optical second harmonic generation from these periodically arrayed nickel nanoparticles reveals intensity with a value much larger than that generated from a uniform nickel-film of the same thickness. Quasi phase matching contributed from Bragg wave vectors of the periodic arrayed nickel nanoparticles can satisfactorily express this enhancement.     

Characterization of laser droplet formation by reflected light

The subject of this experimental investigation is a novel laser droplet formation (LDF) process. During the LDF process, droplets are formed by melting the tip of a wire using a laser pulse. The goal of our research is to develop a non-contact method for characterization of the LDF process. For this purpose we employ the signals of the laser light that is reflected from the tip of the wire. The experiments were performed with nickel and tin-alloy wire. Results show that in-process characterization of various phases of the LDF process, like melting of the wire tip and formation of a molten pendant droplet is possible regardless of the wire material. In addition, a method for post-process detection of droplet detachment has been developed. Using the statistically defined threshold value, 99.2% and 97.8% detection reliability of droplet detachment was achieved in the case of nickel and tin-alloy wire, respectively.