Highly Sensitive ‘on–off’ Pyrene Based AIEgen for Selective Sensing of Copper (II) Ions in Aqueous Media

A Fluorescent chemosensor based on pyrene scaffold, 5-diethylamino-2-(pyren-1-yliminomethyl)-phenol (PDS) is synthesized using condensation method. It displays novel aggregation-induced emission (AIE) phenomena in its aggregated/solid state. The AIE characteristic of PDS is studied in CH₃CN/H₂O mixtures at different volume percentage of water and morphology of the aggregated particles are investigated by DLS and optical fluorescence microscopic study. The probe is aggregated into ordered one-dimensional (1-D) rod like microcrystals and exhibit high efficiency of solid-state emission with green colour. By taking advantage of its interesting AIE feature, the aggregated hydrosol has been utilized as ‘off–on’ type fluorescence switching chemosensor with superb selectivity and sensitivity towards Cu²⁺ions and the limit of detection (LOD) was calculated as low as 6.3 µM. A high Stern–Volmer quenching constant was estimated to be 2.88?×?10⁵ M^?1. The proposed chemosensor with AIE feature reveals a prospective view for the on-site visual recognition of Cu²⁺ ions in fluorescent paper strips and the synthesized probe is also exploited to find out the concentration of Cu²⁺ions in real water samples.

     

A Coumarin-Based Fluorescent Chemosensor for Zn<Superscript>2+</Superscript> in Aqueous Ethanol Media

A coumarin-based fluorescent chemosensor 1 for Zn²⁺ was designed and synthesized. Compound 1 exhibits lower background fluorescence due to intramolecular photoinduced electron transfer. However, upon mixing with Zn²⁺ in 30% (v/v) aqueous ethanol, a “turn-on” fluorescence emission is observed. The fluorescence emission increases linearly with Zn²⁺ concentration in the range 0.5–10 μmol L⁻¹ with a detection limit of 0.29 μmol L⁻¹. No remarkable emission enhancement was, however, observed for other metal ions. The proposed chemosensor was applied to the determination of Zn²⁺ in water samples with satisfactory results.     

Experimental and Theoretical Studies of the Pyrazoline Derivative 5-(4-methylphenyl)-3-(5-methylfuran-2-yl)-1-phenyl-4,5-dihydro-1H-Pyrazole and its Application for Selective Detection of Cd2+ ion as Fluorescent Sensor

A simple fluorescent chemosensor 5-(4-methylphenyl)-3-(5-methylfuran-2-yl)-1-phenyl-4, 5-dihydro-1H-pyrazole (PY) has been synthesized for the detection of Cd²⁺ ion.The fluorescent probe PY shows high selectivity for Cd²⁺in the presence of othermetal ions (Co²⁺, Cu²⁺, Hg²⁺, Mn²⁺, Zn²⁺, Fe³⁺, Pb²⁺, Ni²⁺, and Al³⁺). The fluorescence intensity of the PY has been strongly quenched with increasing concentration of Cd²⁺ (0–0.9 μM)via photoinduced electron transfer mechanism. The binding constant of Cd²⁺ to PY for the 1:1 complex isfound to be 5.3?×?10⁵ M^?1with a detection limit of 0.09 μM. The chemosensor was successfully applied for determination of Cd²⁺ in different water samples (tap, river, and bottled water) showing good recovery values in the range of 94.8–101.7% with RSD less than 3%. Density functional theory (DFT) calculations were also performed to investigate electronic and spectral characteristics which are quite agreeable with the experimental value. The results show that the synthesized fluorescent chemosensor shows good selectivity towards Cd²⁺ and can be readily applied for the detection of Cd²⁺ in real samples including water samples.

Graphical Abstract

     

A Highly Fluorescent Pyrene-Based Sensor for Selective Detection Of Fe3+ Ion in Aqueous Medium: Computational Investigations

In this work, we introduce a highly selective and sensitive fluorescent sensor based on pyrene derivative for Fe(III) ion sensing in DMSO/water media. 2-(pyrene-2-yl)-1-(pyrene-2-ylmethyl)-1H-benzo[d]imidazole (PEBD) receptor was synthesized via simple condensation reaction and confirmed by spectroscopic techniques. The receptor exhibits fluorescence quenching in the presence of Fe(III) ions at 440 nm. ESI–MS and Job’s method were used to confirm the 1:1 molar binding ratio of the receptor PEBD to Fe(III) ions. Using the Benesi-Hildebrand equation the binding constant value was determined as 8.485?×?10³ M^?1. Furthermore, the limit of detection (LOD, 3σ/K) value was found to be 1.81 µM in DMSO/water (95/5, v/v) media. According to the Environmental Protection Agency (EPA) of the United States, it is lower than the acceptable value of Fe³⁺ in drinking water (0.3 mg/L). The presence of 14 other metal ions such Co²⁺, Cr³⁺, Cu²⁺, Fe²⁺, Hg²⁺, Pb²⁺, K⁺, Ni²⁺, Mg²⁺, Cd²⁺, Ca²⁺, Mn²⁺, Al³⁺, and Zn²⁺ did not interfere with the detection of Fe(III) ions. The fluorescence life-time of the receptor PEBD with and without Fe³⁺ ion was found to be 1.097?×?10^?9 s and 0.9202?×?10^?9 s respectively. Similarly, the quantum yield of the receptor PEBD with Fe³⁺ and without Fe³⁺ ion was calculated, and found as 0.05 and 0.25 respectively. Computational studies of the receptor PEBD were carried out with density functional theory (DFT) using B3LYP/ 6-311G (d, p), LANL2DZ level of theory.

Graphical Abstract

     

A Turn-on Fluorescent Chemosensor for Zn<Superscript>2+</Superscript> Based on Quinoline in Aqueous Media

A simple “off-on fluorescence type” chemosensor 1 3-((2-(dimethylamino)ethyl)amino)-N-(quinolin-8-yl)propanamide has been synthesized for Zn²⁺. The receptor 1 comprises the quinoline moiety as fluorophore and the N,N^′-dimethylethane-1,2-diamine as a binding site. 1 showed a remarkable fluorescence enhancement in the presence of Zn²⁺ in aqueous solution. Importantly, the chemosensor 1 could be used to detect and quantify Zn²⁺ in water samples. In particular, this chemosensor could clearly distinguish Zn²⁺ from Cd²⁺. The binding properties of 1 with Zn²⁺ ions were investigated by UV-vis, fluorescence, electrospray ionization mass spectroscopy and ¹H NMR titration.     

A New Sensitive and Selective Off-On Fluorescent Zn<Superscript>2+</Superscript> Chemosensor Based on 3,3′,5,5′-Tetraphenylsubstituted Dipyrromethene

3,3′,5,5′-Tetraphenyl-2,2′-dipyrromethene was described as a highly sensitive and selective Off-on fluorescent colorimetric chemosensor for Zn²⁺ based on the chelation-enhanced fluorescence (CHEF) effect. The reaction of dipyrromethene ligand with Zn²⁺ induces the formation of the [ZnL₂] complex, which exhibits the increasing fluorescence in 120 fold compared with ligand in the propanol-1/cyclohexane (1:30) binary mixture. The Zn²⁺ detection limit was 1.4 × 10^?7 М. The UV-Vis and fluorescence spectroscopic studies demonstrated that the dipyrromethene sensor was highly selective toward Zn²⁺ cations over other metal ions (Na⁺, Mg²⁺, Co²⁺, Ni²⁺, Fe³⁺, Cu²⁺, Mn²⁺, Cd²⁺ and Pb²⁺), excluding Hg²⁺.     

Design and Synthesis of a Pyridine Based Chemosensor: Highly Selective Fluorescent Probe For Pb2+

A pyridine based imine-linked chemosensor has been synthesized and evaluated its binding affinity with library of transition metal ions. It has prominent selectivity towards Pb²⁺ among other metal ions in DMF/H₂O (9:1, v/v) solvent system. The 1:1 stoichiometric was confirmed by job’s plot and has a binding constant (K_a)?=?5.142?×?10³ M^?1 on fluorescence. A B3LYP/6-31G and B3LYP/LanL2DZ basis sets were employed for optimization of 3 and 3.Pb²⁺.     

Sensitive and Selective PET-Based π-expanded Phenanthrimidazole Luminophore for Zn2+ Ion

The novel photoinduced electron transfer (PET) chemosensor, 1-(1-(4-methoxyphenyl)-1H-phenanthro[9,10-d]imidazol-2-yl)naphthalen-2-ol [MPPN] and its zinc complex were synthesised and characterized by electronic spectral and Frontier molecular orbital energy analysis. MPPN becomes efficient fluorescent chemosensor upon binding with metal ions and shows a strong preference toward Zn²⁺ ion. Density Functional theory (DFT) calculations reveal that luminescence of free MPPN originates from its orbital structure in which two π-orbitals (HOMO and HOMO-1) of the imidazole ring are situated between two π-orbitals (HOMO-2 and LUMO) of the naphthyl fragment. Therefore the absorption and emission processes occur between the two π- orbitals (HOMO-2 and LUMO). The two higher energy imidazole orbitals (HOMO and HOMO-1 ) serve as quenchers for the excited state of the molecule through nonradiative processes. Upon binding with Zn²⁺ ion, MPPN becomes a highly luminescent with λ_emi???421 nm. The significant enhancement of luminescence upon binding with Zn²⁺ ion is attributed to the stabilization of HOMO-2 and HOMO-1 π-orbitals of imidazole ring upon their engagement in new bonds with Zn²⁺ ion. The affinity of MPPN to zinc ion is found to be very high [K?=?6?×?10⁶ M^?1] when compared with other metals ions. The nonlinear absorption coefficient γ for MPPN is 1.9?×?10^?12 m/W and 3.9?×?10^?11 m/W for MPPN-Zn complex.     

Developing a novel fluorescence chemosensor by self-assembly of Bis-Schiff base within the channel of mesoporous SBA-15 for sensitive detecting of Hg ions

A novel fluorescence chemosensor for Hg²⁺ ion has been developed by the assembly of fluorescence Bis-Schiff base PMBA within the channels of CPTES-modified SBA-15. The ordered porous structure of SBA-15 is still retained on the hybrid chemosensor material PMBA-SBA. A remarkable fluorescence quenching of PMBA-SBA by Hg²⁺ ion was attributed to heavy atom effect of Hg²⁺ ion. The linear detecting range of the hybrid mesoporous chemosensor for Hg²⁺ ion is 2-15 μM and the lowest detection limit is 0.6 μM in ethanol/water (9:1, v/v) solution.     

A Highly Selective Turn on Fluorescence Sensor for Hg2+ Based on Rhodamine Derivative

A novel fluorescent rhodamine based chemosensor (E)-3′,6′-bis(diethylamino)-2-((2-(pyridin-2-ylmethoxy)benzylidene)amino)spiro[isoindoline-1,9′-xanthen]-3-one, RSP, had been successfully developed and well characterized by NMR, FT-IR and Mass spectroscopy. The chemosensor exhibits high selectivity for Hg²⁺ over other ions (Ag⁺, Pb²⁺, Cu²⁺, Ni²⁺, Fe³⁺, Co²⁺, Zn²⁺ and Cd²⁺) with fluorescence enhancement in ethanol solution. More over the detection limit of the sensor is in the 10^?6 M level. The binding ratio of RSP-Hg²⁺ complex was determined to be 1:1 according to the Job plot. Test strips based on RSP were fabricated, which showed the application of the sensor for detection of mercuric ions in water by naked eyes.     

Synthesis,Characterization and Applications of Schiff Base Chemosensor for Determination of Cr(III) Ions

The development of a highly sensitive, selective, and efficient sensor for the determination and detection of Cr(III) ions remains a great challenge. Recently, some fluorescent chemosensors have been developed for the recognition of Cr(III) ions. But, the main drawbacks of the reported fluorescent chemosensors are the lack of selectivity and interference of anions and other trivalent cations. Herein, we designed and synthesized a novel thiazole-based fluorescent and colorimetric Schiff base chemosensor SB2 for the detection of Cr(III) ion by chemodosimetric approach. Using different analytical techniques including UV–vis, ¹³C-NMR, ¹H-NMR, and FT-IR analysis the chemosensor SB2 was structurally characterized. The fully characterized chemosensor SB2 was used for the spectrofluorimetric and colorimetric detection of Cr(III) ions. Interestingly, chemosensor SB2 upon interaction with various metal cations including Ni²⁺, Na⁺, Cd²⁺, Ag⁺, Mn²⁺, K⁺, Zn²⁺, Cu²⁺, Hg²⁺, Co²⁺, Pb²⁺, Mg²⁺, Sn²⁺, Al³⁺ and Cr³⁺ displays highly selective and sensitive fluorescent (turn-on) and colorimetric (yellow to colorless) response toward Cr(III) ions. The fluorescence and UV–vis techniques confirmed the selective hydrolysis of azomethine group (-C?=?N-) of Schiff base chemosensor SB2 by Cr(III) ions. As a result, the fluorescence enhancement was observed that is corresponding to 2-hydroxy-1-nepthaldehyde (fluorophore). The chemosensor SB2 exhibits high interference performance towards Cr(III) ions over other metal cations in a wide pH range. Mover, the quite low detection limit was calculated to be 0.027 µg ml-1 (0.5 µM) (3σ/slop), lower than the maximum tolerable limits of Cr(III ions (10 µM) in drinking water permitted by the United States Environmental Protection Agency (EPA). These results show that chemosensor SB2 has great potential to detect selectively Cr(III) ions in the agricultural, environmental and biological analysis system.

Graphical Abstract

     

A Pyrene-based Highly Selective Turn-on Fluorescent Sensor for Copper(II) Ion and its Application in Live Cell Imaging

A new pyrene derivative (chemosensor 1) containing a picolinohydrazide moiety exhibits high selectivity for Cu²⁺ ion detection in mixed aqueous media (CH₃OH:H₂O = 7:3). Significant fluorescence enhancement was observed with chemosensor 1 in the presence of Cu²⁺. However, the metal ions Ag⁺, Ca²⁺, Cd²⁺, Co²⁺, Cu²⁺, Fe²⁺, Fe³⁺, Hg²⁺, K⁺, Mg²⁺, Mn²⁺, Ni²⁺, Pb²⁺, and Zn²⁺ produced only minor changes in fluorescence for the system. The apparent association constant (K _a) of Cu²⁺ binding in chemosensor 1 was found to be 2.75*10³ M⁻¹. The maximum fluorescence enhancement caused by Cu²⁺ binding in chemosensor 1 was observed over the pH range 5–8. Moreover, by means of fluorescence microscopy experiments, it is demonstrated that 1 can be used as a fluorescent probe for detecting Cu²⁺ in living cells.     

Urea Based Dipodal Fluorescence Receptor for Sensing of Fe3+ Ion in Semi-Aqueous Medium

Urea based fluorescent chemosensor 1 was synthesized. Receptor 1 shows unique selectivity for the Fe³⁺ion and no such significant response was noticed with other metal ions (Cr³⁺, Mn²⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Hg²⁺, Pb²⁺ and Bi³⁺) in DMSO/H₂O (50:50,v/v) semi-aqueous solution. The binding features have been established by absorption and fluorescence spectroscopic methods. The binding constant (K) values obtained from Benesi-Hildebrand, Scatchard and Connor plot for receptor 1 is (8.3?±?0.3) × 10³ M^?1 and has good detection limit 0.7?μM. The stoichiometry of 1.Fe³⁺ complex was confirmed by mass spectroscopy and Job’s plot.

An NBD-based Sensitive and Selective Fluorescent Sensor for Copper(II) Ion

A new 7-nitrobenz-2-oxa-1,3-diazole (NBD) derived fluorescent probe (1) exhibiting high selectivity for Cu²⁺ detection, produced significant fluorescence quenching in the presence of Cu²⁺ ion, while the metal ions Ca²⁺, Cd²⁺, Co²⁺, Fe²⁺, Hg²⁺, Mg²⁺, Mn²⁺, Ni²⁺ and Zn²⁺ produced only minor changes in fluorescence. The apparent association constant (K _a) for Cu²⁺ binding in chemosensor 1 was found to be 1.22 × 10³ M⁻¹. The maximum fluorescence quenching activity caused by Cu²⁺ binding to 1 was observed over the pH range 6–10.     

A Highly Selective and Sensitive Fluorescent Chemosensor for Aluminum Ions Based on Schiff Base

An efficient “off–on” type fluorescent chemosensor, (E)-N′-(4-(diethylamino)-2-hydroxybenzylidene)-2-hydroxybenzohydrazide (H ₂ L), based on Schiff base for the determination of Al³⁺ has been designed, synthesized, and evaluated. Upon treated with Al³⁺, the fluorescence of H ₂ L was enhanced 45-fold due to the chelation-enhanced fluorescence (CHEF) effect based on the formation of a 1:1 complex between the chemosensor and Al³⁺. Other metal ions, such as Na⁺, K⁺, Mg²⁺, Ca²⁺, Cu²⁺, Ga³⁺, Zn²⁺, Cr³⁺, Cd²⁺, Ag⁺, Fe³⁺, In³⁺, Mn²⁺, Pb²⁺, Co²⁺, and Ni²⁺ had little effect on the fluorescence. The results demonstrate that the chemosensor H ₂ L has stronger affinity with Al³⁺ than other metal ions. The detection limit of H ₂ L for sensing Al³⁺ is 3.60 × 10^?6 M in EtOH–H₂O (3:7, v/v) solution. And the recognizing behavior has been investigated both experimentally and computationally.     

Investigation of three flavonoids binding to bovine serum albumin using molecular fluorescence technique

The three flavonoids including naringenin, hesperetin and apigenin binding to bovine serum albumin (BSA) at pH 7.4 was studied by fluorescence quenching, synchronous fluorescence and UV–vis absorption spectroscopic techniques. The results obtained revealed that naringenin, hesperetin and apigenin strongly quenched the intrinsic fluorescence of BSA. The Stern–Volmer curves suggested that these quenching processes were all static quenching processes. At 291 K, the value and the order of the binding constant were K_{A (naringenin)}=4.08×10⁴<K_{A (hesperetin)}=5.40×10⁴≈K_{A (apigenin)}=5.32×10⁴ L mol^?1. The main binding force between the flavonoid and BSA was hydrophobic and electrostatic force. According to the Förster theory of non-radiation energy transfer, the binding distances (r₀) were obtained as 3.36, 3.47 and 3.30 nm for naringenin–BSA, hesperetin–BSA and apigenin–BSA, respectively. The effect of some common ions such as Fe³⁺, Cu²⁺, Mg²⁺, Mn²⁺, Zn²⁺ and Ca²⁺ on the binding was also studied in detail. The competition binding was also performed. The apparent binding constant (K′_A) obtained suggested that one flavonoid had an obvious effect on the binding of another flavonoid to protein when they coexisted in BSA solution.     

A Pyrene-based Highly Selective Turn-on Fluorescent Chemosensor for Iron(III) Ions and its Application in Living Cell Imaging

A new pyrene-based chemosensor (1) exhibits excellent selectivity for Fe³⁺ ions over a wide range of tested metal ions Ag⁺, Ca²⁺, Cd²⁺, Co²⁺, Cu²⁺, Fe²⁺, Hg²⁺, K⁺, Mg²⁺, Mn²⁺, Ni²⁺, Pb²⁺, and Zn²⁺. The binding of Fe³⁺ to chemosensor 1 produces an emission band at 507 nm due to the formation of a Py-Py* excimer that is induced by Fe³⁺-binding. The binding ratio of 1-Fe³⁺ was determined to be 1:1 from a Job plot. The association constant of 1-Fe³⁺ complexes was found to be 1.27?×?10⁴ M^?1 from a Benesi-Hildebrand plot. In addition, fluorescence microscopy experiments show that 1 can be used as a fluorescent probe for detecting Fe³⁺ in living cells.     

Highly selective fluorescent chemosensor for detecting Hg(II) in water based on pyrene functionalized core–shell structured mesoporous silica

Novel pyrene functionalized mesoporous core–shell structured silica (denoted as SiO₂@mSiO₂/Py-Si) was designed and synthesized as a highly selective fluorescent chemosensor for detecting Hg²⁺ in water. The core–shell structured silica was prepared by a simple sol–gel process through coating SiO₂ nanospheres with a layer of ordered mesoporous silica. The surface of outer mesoporous silica shell was then further functionalized by the fluorescent chromophore alkoxysilane modified pyrene (Py-Si). XRD data confirmed that the hexagonal ordered mesoporous structure was preserved after functionalization. The chemosensing material successfully exhibited a remarkable “turn on” response toward Hg²⁺ over miscellaneous metal ions. A good linear response towards Hg²⁺ in the concentration range of 10^?8–10^?4 M was constructed with R²=0.9913. Most importantly, a satisfactory detection limit of 3.4×10^?9 g mL^?1 (down to ppb level) was obtained, which is 100 times lower than our previous report of covalently grafted Py-OH to the bulk mesoporous silica SBA-15. These results indicated that SiO₂@mSiO₂/Py-Si can be used as a highly selective and sensitive fluorescence sensor for Hg²⁺.     

Dithiane Based Boronic Acid as a Carbohydrate Sensor in an Aqueous Solution at pH 7.5: Theoretical and Experimental Approach

Carbohydrate sensing in an aqueous solution remains a very challenging area of interest. Using the idea of covalent reversible interaction between boronic acids and the diol groups in carbohydrates enable us to design a carbohydrate sensor 1-thianthrenylboronic acid (1T), which has high selectivity towards fructose. To elucidate the sensing and binding properties of 1T with sugars, we have incorporated theoretical (DFT and TD-DFT) and spectroscopic techniques. For an optimized geometry, the complete vibrational assignments were done with FT-IR and FT-Raman spectra. Physiochemical parameters were obtained by implementing frontier molecular orbital (FMO) analysis. Further, excited state properties were determined by performing TD-DFT calculations in solvent and these properties were in good agreement with the experiment. The steady state fluorescence measurements with varying concentration of sugars, revealed that the fluorescence intensity of boronic acid is enhanced by studied sugars due to the structural modification. We also noticed remarkable changes in fluorescence lifetimes and quantum yield after adding sugars. The article also reports influence of pH on boronic acid’s fluorescence intensity with and without sugars. The fluorescence of boronic acid increases with the increase in pH. These changes are due to acid–base equilibrium of boronic acid and led us to estimate the pKa value of 7.6. All the theoretical and experimental evidences suggested that 1T can be used as a possible fluorescent sensor for fructose. In addition, 1T showed very good affinity for Cu²⁺ ion with K_a?=?150?×?10² M^?1, which suggests that 1T can also be used as a chemosensor for Cu²⁺ ions.

     

Turn-off Fluorescence Chemosensor for Iron with Bis(2-aminoethyl)-2-(9-fluorenyl)malonamide Functionlized SBA-15

An bis(2-aminoethyl)-2-(9-fluorenyl)malonamide as fluorophore ligand was immobilized onto mesoporous silica type SBA-15 via post synthesis grafting. The obtained material was characterized by small and wide angle X-ray diffraction, N₂ adsorption–desorption, Fourier transform infrared spectroscopy, Raman spectroscopy and thermogravimetric analysis that indicate the successful immobilization of the ligand on the surface of mesoporous silica. The sensing ability of the obtained material was studied by addition of the cations Fe³⁺, Mg²⁺, Cr³⁺, Co²⁺, Ni²⁺, Cu²⁺, Hg²⁺ and Zn²⁺ to water suspensions of the assayed solid. Of all the cations tested addition of Fe³⁺ ion to a suspension of this material resulted in the largest decrease in the fluorescence intensity. Turn-off photoluminescence of this material was remarkably observed for iron ions in comparing of the other cations. A good linearity between the fluorescence intensity of this material and the concentration of Fe³⁺ ion is constructed, which enables it as a fluorescence chemosensor for detecting the Fe³⁺ ion with a suitable detection limit of 1.35?×?10^?5. It can be introduced as a novel fluorescent sensor in aqueous solution for a lot of practical applications in chemical, environmental and biological systems.