AISI 304L奥氏体不锈钢表面微孔结构的强流脉冲电子束快速制备与表征

 利用强流脉冲（HCPEB）电子束技术,对AISI 304L奥氏体不锈钢进行了辐照处理,并利用透射电子显微镜对HCPEB诱发的空位簇缺陷进行了表征。实验结果表明,HCPEB辐照金属可在辐照表层诱发大量的过饱和空位,并形成空位型位错圈和堆垛层错四面体（SFT）。利用金相显微镜、扫描电子显微镜和非接触式光学轮廓仪,对其表面形貌进行了详细的表征,发现电子束处理后的样品表面形成了高密度、弥散分布和尺寸细小的微孔,表面微孔是由于HCPEB轰击诱发的大量空位(簇)缺陷,以线或面等结构缺陷为路径,向表层迁移导致空位的累积而形成的。采用HCPEB技术,选择合适的材料和辐照工艺参数,可以成功地制备出表面多孔金属材料。     

强流脉冲电子束作用下金属纯Cu的微观结构状态——空位簇缺陷及表面微孔结构

利用强流脉冲(HCPEB)电子束技术对多晶纯Cu进行了辐照处理,并利用透射电镜对HCPEB诱发的空位簇缺陷进行了表征.实验结果表明,HCPEP辐照金属可在纯Cu表层诱发大量的过饱和空位,并形成四方形空位胞及空位型位错圈和堆垛层错四面体(SFT),HCPEB瞬间的加热和冷却诱发的幅值极大的应力和极高的应变导致的整个原子平面的位移是空位簇缺陷形成的主要原因.此外,扫描电镜分析表明HCPEB辐照可以在纯Cu表面形成高密度、弥散分布和尺寸细小的微孔.过饱和空位或空位团簇沿晶体缺陷向表面扩散、凝聚是表面微孔形成的根     

强流脉冲电子束辐照诱发纯钼表面的损伤效应及结构缺陷

利用强流脉冲电子束（HCPEB）装置对纯钼表面进行辐照处理,并利用X射线衍射仪,扫描电子显微镜（SEM）、透射电子显微镜（TEM）详细分析了辐照表面的微观结构和损伤效应. 1次HCPEB辐照后,纯钼表层积聚了极大的残余应力,多次辐照后表面未融化区域出现大量绝热剪切带,且局部区域发生开裂. 微观结构分析显示,辐照后材料表面形成发散状的位错组态和大量空位簇缺陷;绝热剪切带内部是尺寸为1 μm 左右等轴状的再结晶晶粒. 剪切带造成的材料表面局部软化以及间隙原子偏聚于晶界是材料发生开裂的主要原因. 另外,表面熔化区域可形成尺寸为20 nm左右的纳米晶. 关键词： 强流脉冲电子束 纯钼 绝热剪切带 空位簇缺陷     

强流脉冲电子束辐照对NiCoCrAlY涂层结构和性能的影响

 采用低气压等离子体喷涂在DZ4镍基高温合金表面沉积NiCoCrAlY 涂层,并利用强流脉冲电子束（HCPEB）对其进行辐照处理。对HCPEB辐照处理前后的涂层的结构和性能分析得出,经HCPEB辐照处理后,疏松的涂层表面重熔,变得致密平整,产生微区光滑、熔坑和裂纹。X射线衍射分析表明,电子束辐照后涂层中的γ′相增多,涂层没有产生明显的残余微观内应力。900 ℃静态空气等温氧化试验结果显示,HCPEB辐照处理后,涂层的抗氧化性能明显提高。原因在于电子束辐照处理的涂层氧化后表面形成了更加完整的Al2O3保护层,同时γ′相的增加也有利于其耐氧化性能的提高。     

强流脉冲电子束辐照诱发多晶纯铝中的空位缺陷簇结构

利用强流脉冲电子束（HCPEB）技术对多晶纯铝样品进行辐照,采用透射电子显微镜详细分析了辐照诱发的空位簇缺陷.HCPEP辐照后,在辐照表层内形成了大量的四方形空位胞,其间包含位错圈和堆垛层错四面体（SFT）等类型的空位簇缺陷.1次辐照后,空位胞内产生空位型位错圈,5次辐照则主要产生SFT;10次辐照后,空位胞内产生的空位簇缺陷主要是位错圈,局部区域也观察到了SFT缺陷,在产生SFT的附近区域具有很低的位错密度或者几乎无位错出现.HCPEB辐照产生的瞬间加热和冷却诱发了幅值极大且应变速率极高的应力,这一因素 关键词： 强流脉冲电子束 多晶纯铝 空位簇缺陷 堆垛层错四面体     

强流脉冲电子束辐照诱发金属纯镍中的空位簇缺陷

利用强流脉冲电子束(high-current pulsed electron beam,HCPEB)技术对多晶纯Ni进行了辐照处理,采用透射电子显微镜详细分析了辐照诱发的缺陷结构.HCPEB辐照后,纯镍表层积聚了幅值极大的残余应力,沿{111}晶面形成了稠密的位错墙及孪晶结构,另外还形成了大量的包括位错圈、堆垛层错四面体(SFT)及孔洞在内的空位簇缺陷.SFT缺陷的数量远高于其他空位簇缺陷,其周围区域位错密度很低.孔洞缺陷主要出现在SFT密集区域.HCPEB瞬间的加热和冷却诱发的幅值极大的应力和极高的应变 关键词： 强流脉冲电子束 多晶纯Ni 空位簇缺陷 堆垛层错四面体     

金属材料界面与辐照缺陷的交互作用机理

高能粒子辐照在材料内部产生大量的辐照缺陷,如间隙原子、空位、位错环、空洞和气泡等.大量辐照缺陷的形成和演化引起材料微观结构的失稳并造成严重的辐照硬化和脆化.界面工程是一种调控材料抗辐照性能的有效方法.通过引入高密度的晶界、相界、自由表面等来增加空位和间隙原子的复合概率,能有效降低辐照缺陷的积聚,提高材料的结构稳定性,消除或减弱辐照的有害效应.本文简述了几种典型金属材料界面与不同类型辐照缺陷的交互作用机理,分析了界面结构、缺陷类型和辐照条件对交互作用过程的影响,最后讨论了本领域需进一步关注的热点问题,期望运用多学科知识和研究方法更好地揭示辐照损伤过程并设计新型抗辐照损伤材料.     

表面状态对强流脉冲电子束辐照诱发金属表面熔坑的影响

 为了考察材料晶体学特性对表面熔坑形成机制的影响,利用强流脉冲电子束（HCPEB）对喷丸前、后的304奥氏体不锈钢进行表面辐照处理,对HCPEB诱发的表面熔坑形貌进行了详细的表征。实验结果表明,HCPEB辐照后样品表面形成了大量的火山状熔坑,熔坑数密度和熔坑尺寸随电子束能量的增加而减小,材料表面的杂质或夹杂物容易成为熔坑的核心,并在熔坑形成的喷发过程中被清除,起到净化表面的作用。此外,喷丸前、后样品表面熔坑数密度遵循相似的分布规律,喷丸处理使熔坑数密度显著增大,表明材料的晶体学特性对表面熔坑形成有重要的影响,晶界、位错等结构缺陷是熔坑形核的择优位置。     

强流脉冲电子束诱发纯钛表面的微观结构及应力状态

利用强流脉冲电子束(HCPEB)装置对金属纯钛进行轰击,采用X射线衍射,扫描电子显微镜及透射电子显微镜技术详细分析了轰击样品表层的结构和缺陷. X射线衍射分析表明, HCPEB能够在材料表层诱发幅值为 GPa量级的压应力,并在(100), (102)和(103)晶面出现择优取向.表层微观结构的观察表明: HCPEB轰击后材料表层发生了马氏体相变,形成了大量的片状马氏体组织; 此外, HCPEB轰击还在辐照表面诱发了强烈的塑性变形,一次轰击后,晶粒内部的塑性变形以(100)晶面的位错滑移为主,位错密度显著提高;多次轰击后,样品变形结构发生变化,变形孪晶的数量明显增多. 这些变形微结构不仅影响表层的织构演化行为,而且还能细化晶粒,进而提高材料表面硬度, 为HCPEB技术进行纯钛表面强化提供了一条有效的途径.     

强流脉冲电子束作用下金属锆的微观结构与应力状态

利用强流脉冲电子束 (HCPEB) 技术对金属纯锆进行表面处理, 采用X射线衍射, 扫描电子显微镜及透射电子显微镜详细分析了辐照诱发的表层微观结构和缺陷. X射线分析结果表明, HCPEB辐照后在材料表层诱发幅值为GPa量级的压应力, 并形成{0002}, {1012}, {1120}及{1013}织构. 表层微观结构观察表明, 与其他金属材料不同, HCPEB辐照在材料表层诱发的熔坑数量极少, 多次轰击甚至几乎没有表面熔坑的形成. 此外, 在快速的加热和冷却状态下, 在表面熔化层形成大量的超细晶粒结构, 同时诱发马氏体相变和强烈的塑性变形. 1次HCPEB辐照后表层内形成的变形微结构以位错为主, 孪晶数量较少; 5 次辐照样品的位错密度迅速增高, 孪晶数量也显著增加; 10次辐照后样品中的变形微结构以变形孪晶为主, 且出现二次孪晶现象. 表层晶粒内部变形的晶体学特征不仅决定了表层的织构演化行为, 而且还起到细化晶粒的作用, 为纯锆及锆合金表面强化提供了一条有效的途径. 关键词： 强流脉冲电子束 纯锆 微观结构 应力状态     

Self-organization of five species in a cyclic competition game

Cyclic competition game models, particularly the “rock–paper–scissors” model, play important roles in exploring the problem of multi-species coexistence in spatially ecological systems. We propose an extended “rock–paper–scissors” game to model cyclic interactions among five species, and find that two of the five can coexistent when biodiversity disappears, which is different from the “rock–paper–scissors” game. As the number of fingers is five, we named the new model the “fingers” game, where the thumb, forefinger, middle finger, ring finger, and little finger cyclically dominate their subsequent species and are dominated by their former species. We investigate the “fingers” model in two ways: direct simulations and nonlinear partial differential equations. An important finding is that the number of species in a cyclic competition game has an influence on the emergence of biodiversity. To be specific, the “rock–paper–scissors” model is in favor of maintaining biodiversity in comparison with the “fingers” model when the variables (population size, reproduction rate, selection rate, and migration rate) are the same. It is also shown that the mobility and reproduction rate can promote or jeopardize biodiversity.     

Experimental study on downstep in Chinese intonation

Downstep in pitch contour of Chinese Putonghua is examined using subtly designed sentences by controlling tone combinations. The results show both automatic and nonautomatic downstep phenomena exist in Chinese. In non-automatic downstep, low tones compress downwards the pitch range of the following syllables. and the main influence of downstep is on topline. Low tone not only lower the topline behind it, but also raise the high tones before it, the effects are compatible with each other. In automatic downstep, the topline of pitch contour in intonational phrase is presented as a linear downtrend, but it differs among speakers due to the effect of personal stress practice. In comparison with downstep phenomenon in other tone or non-tone languages, the downstep ratio in Chinese is not constant, and the domain of downstep is not limited within the adjacent tones.     

Contrastive analysis on tone between Putonghua and Taiwan Mandarin

The differences of the pitch and duration of Chinese syllables between Putonghua （PTH） and Taiwan Mandarin （TM） were studied. The speech materials to be used are not only isolated syllables, but also sentences. The results reveal that： For the isolated syllables, T1 and T2 in TM are influenced by Minnan dialect, therefore their pitch are lower than those in PTH. T3 is fall-rise in PTH, while it is fall in TM. Moreover, the syllable duration sequence for different tone is T3〉T2〉T1〉T4 in PTH, while it is T1〉T2〉T3〉T4 in TM. For the syllables in sentences, T2 is mid-rise in PTH, while it is mid-level in TM. And the T3 is longer than T4 but shorter than T1 or T2 in PTH, while it is the shortest in TM. Furthermore the effects of prosodic phrase boundary on duration for different tones are almost the same in PTH, but the lengthening part of T1 or T2 is longer than that of T3 or T4 in TM.     

Abelian-Higgs phase of SU(2) QCD and glueball energy

It is shown that SU(2) QCD admits an dual Abelian-Higgs phase, with a Higgs vacuum of a type-Ⅱ superconductor. This is done by using a connection decomposition for the gluon field and the random-direction approximation. Using a bag picture with soft wall, we presented a calculational procedure for the glueball energy based on the recent proof for wall-vortices [Nucl. Phys. B 741(2006)1].     

High efficiency filtering using two-dimensional photonic crystal coupled cavity structures

Transmission spectra of coupled cavity structures (CCSs) in two-dimensional (2D) photonic crystals (PCs) are investigated using a coupled mode theory, and an optical filter based on CCS is proposed. The performance of the filter is investigated using finite-difference time-domain (FDTD) method, and the results show that within a very short coupling distance of about 3λ, where λ is the wavelength of signal in vacuum, the incident signals with different frequencies are separated into different channels with a contrast ratio of 20 dB. The advantages of this kind of filter are small size and easily tunable operation frequencies.     

Signal generation in an isotropic medium in scanning electron acoustic microscope

Based on the research in Ref. [5][Materials Science and Engineering, 1989; A122： 57 63], an improved model of heat source is set up, the different modes of Lamb wave in an isotropic sample generated by a chopped electron beam at frequency f are obtained with integral transform and normal function expansion method, and the output signal of PZT coupled at the back surface of the sample is found out. The generation mechanism of SEAM （Scanning Electron Acoustic Microscopy） signal is discussed. It shows that the SEAM is a near field imaging technique with high spatial resolution and its best lateral spatial resolution is about 2√2α （α is the radius of the focused electron beam）. Some of experimental results of SEAM images are presented in the paper and it shows that the spatial resolution of SEAM is better than 0.5 μm and smaller than the thermal diffusion length of the sample. Therefore the character of near field imaging in SEAM is also proved experimentally.     

Real-time restoration of rotational blurred image using gradient-loading

The key to the restoration of rotational motion blurred image is how to restore the image under a low cost and to correct the irreversibility of the degradation function matrix.Based on the special qualities of degradation function matrix and precise deduction in space-domain, we present a new approach using gradient-loading for restoration of rotational blurred image.By easily adding a gradient operator, the irreversibility of the original matrix is corrected and can be applied for inverse filtering then.Gradientloading is the optimized approach which combines the advantages of both the approaches using constrained least square filtering and traditional diagonal-loading.Compared with the approach using least square filtering, its peak signal-to-noise ratio (PSNR) is improved from 3.18 to 6.46dB, while the computing time is reduced to 1/2-1/3.Experimental results demonstrate the effectiveness, noise-resistibility, robustness, and low complexity of this approach, which make it more suitable for real-time environment.     

All-Optical Logic Device Using Bent Nonlinear Tapered Y-Junction Waveguide Structure

We propose an all-optical logic device made of a bent tapered Y-junction waveguide with a Kerr-type nonlinear interface. It could provide an AND gate, OR gate, and exclusive-OR (XOR) gate. We could obtain different transmission results by adjusting the bending angle. The numerical simulation results show that the device functions as AND, OR, and XOR gates.     

Real-time, continuous-wave terahertz imaging by a pyroelectric camera

Real-time, continuous-wave terahertz (THz) imaging is demonstrated. A 1.89-THz optically-pumped farinfrared laser is used as the illumination source, and a 124 × 124 element room-temperature pyroelectric camera is adopted as the detector. With this setup, THz images through various wrapping materials are shown. The results show that this imaging system has the potential applications in real-time mail and security inspection.