三维两粒子Calogero-Sutherland模型的代数解法

利用赝角动量算符方法给出了三维两粒子CSM的算符体系,研究了三维两粒子CSM谱空间上的对称性.得到归一化的本征函数和Glauber相干态的解析表达式.     

极区夏季中层顶区域尘埃粒子参数的研究

采用轨道受限运动方法研究了极区夏季中层顶区域的尘埃粒子电荷数与尘埃粒子半径。利用尘埃等离子体充电理论,建立了尘埃粒子充电方程模型,得到尘埃粒子充电时尘埃电荷数和半径的比值。然后结合ECT02实验数据,分析了发生极区中层夏季回波现象时极区中层顶区域尘埃粒子电荷数和半径的比值,并得到尘埃粒子的半径以及尘埃粒子所带电荷量。结果表明,极区中层顶区域的尘埃粒子平均所带电荷不到一个,它的半径约为20nm。     

�����ļ��в㶥���򳾰����Ӳ������о�

采用轨道受限运动方法研究了极区夏季中层顶区域的尘埃粒子电荷数与尘埃粒子半径。利用尘埃等离子体充电理论,建立了尘埃粒子充电方程模型,得到尘埃粒子充电时尘埃电荷数和半径的比值。然后结合ECT02实验数据,分析了发生极区中层夏季回波现象时极区中层顶区域尘埃粒子电荷数和半径的比值,并得到尘埃粒子的半径以及尘埃粒子所带电荷量。结果表明,极区中层顶区域的尘埃粒子平均所带电荷不到一个,它的半径约为20nm。     

乙醇喷雾场粒子尺寸和速度的数字全息测量

利用连续波激光器和高速CCD,采用数字同轴全息系统,记录了乙醇喷雾粒子场全息图.对粒子场再现像进行聚焦像合成,自适应滤波、二值化、Roberts边缘提取,Hough变换和亚像素精度计算,得到粒子的直径和位置信息.利用两次曝光记录的两个序列全息图得到粒子位移,进而求得粒子的运动速度,给出了实验结果.研究结果表明,该实验系统可用于内燃机喷雾场测量,且具有光路系统简单、成本低等特点.     

掺杂对随机分布团簇粒子缪勒矩阵的影响

文章分析了不同含量的杂质对随机分布团簇粒子缪勒矩阵的影响.利用Bruggeman有效介质理论得到了含有不同体积份额杂质的硅酸盐粒子的等效复折射率.采用离散偶极子近似方法对包含有不同化学成分的随机分布团簇粒子的缪勒矩阵进行了数值计算,给出了各个缪勒矩阵元素的散射角分布曲线,探讨了不同含量的杂质对随机分布团簇粒子缪勒矩阵的影响.研究表明,掺杂对随机分布团簇粒子的缪勒矩阵存在着不同程度的影响,并且此影响随着粒子尺度参数的变化而显著变化. 关键词： 团簇粒子 缪勒矩阵 Bruggeman有效介质理论 离散偶极子近似方法     

基于改进的二维指数熵及混沌粒子群的阈值分割

鉴于现常用的灰度级—平均灰度级二维直方图区域划分存在明显的不足,提出了基于灰度级—梯度二维直方图的指数熵阈值选取方法,给出了基于改进的二维直方图的指数熵阈值选取公式,并利用混沌粒子群优化算法寻找最佳分割阈值,采用递推方式降低迭代过程中适应度函数的计算代价。实验结果表明,与现有的有关算法相比,该方法不仅使分割后的图像区域内部更均匀、边界形状更准确、特征细节更清晰,而且使计算效率及粒子群的收敛精度得到提高。     

高能碰撞中喷注判定法的研究

对喷注的“圆锥判定法”进行了仔细的研究,给出了两种利用末态粒子动量判断喷注是否存在的判定方法.利用LUND-PYTHIA强子-强子碰撞蒙特卡洛产生器产生的数据样本对这两种判定法进行了检验和对比,得到了一个有效、实用的喷注判定法.     

高能量粒子再分布模型在CFETR上的应用

在中国聚变工程实验堆(CFETR)设计参数下,利用一种高能量粒子(EP)物理简化模型分析了磁流体动力学(MHD)不稳定中新经典撕裂模(NTM)引起的粒子再分布和损失。相位矢量旋转法利用EP相空间中小间隔区域内跟踪探测粒子对来判定粒子轨道随机与否,即记录连接矢量旋转角的方法标记该区域是否存在KAM面破缺,以此为据修正相空间的粒子分布函数和判断粒子损失。利用相空间探测粒子对相位矢量旋转法标记一定NTM幅度下的随机区域分布并迭代得到稳态分布剖面。对捕获粒子区域的共振岛探测结果表明,低频或零频率扰动不会与高能量α粒子形成有效共振,MHD扰动和有效碰撞效应可能使捕获-通行轨道边界附近形成损失通道。     

利用转移矩阵方法求解一维散射问题

利用转移矩阵方法,求解粒子通过任意势垒的透射系数及反射系数,并给出粒子的概率密度分布曲线.     

激光辐照柱体铝靶的三维光滑粒子流体动力学仿真

在现有光滑粒子流体动力学方法基础上,提出了结合差分方法处理激光辐照边界条件的方法,并利用此方法自编程序模拟计算了功率密度为5.0109 W/cm2的强连续激光辐照铝靶时的热-力学效应,准确给出了与激光作用的边界粒子的分布和飞散情况,同时给出了不同时刻靶体的温度场,得到了温度分布规律,并对结果进行了分析。     

Adaptive model simplification in real-time rendering for visualization

In this paper, we propose four different geometric measures to identify appropriate triangles to be simplified in 3D complex model. Each measure yields different weight on the same surface and produces a unique simplified model that worth to be analyzed. The proposed measures involve consideration on the resulting of the surfaces collapse, the high peak and low peak of the triangles mesh, the irregular triangle shape, the capacity and boundary view on the triangles mesh. The chosen triangle is to be collapsed based criterion on Half-edge Collapse Transformation method. From the empirical results, one of the proposed measures presents almost excellence in all the criteria mentioned above. The empirical results include the quality of the surface models (visualization purpose), the efficiency of the measures and the overall appearance preservation of the simplified models. The proposed measures are then to be compared to three existing measures. From the analyzed results, we combine the measures to adapt to the user’s response for generating the user-desired simplified models.     

基于数据重建的三角网格模型简化优化方法

由CT切片数据重建得到的三角网格模型常存在数据量大、狭长三角形多等问题,针对这些问题,研究了一种保持特征的高质量三角网格模型的简化优化方法。该方法分为网格简化和网格优化两个阶段。首先,采用基于曲面变化的二次误差度量计算边折叠代价,并按代价值的大小进行迭代的折叠简化,可较好地保持模型表面的特征;其次,通过二阶加权伞算子对简化模型中局部存在的狭长三角形进行优化处理,改善三角网格模型的质量。实验结果表明,该方法能够较好地保持特征区域的细节信息,并可靠地生成高质量、低几何误差的简化模型。     

三维非结构网格自动生成

采用各向异性平面非结构网格生成技术对曲面的参数平面进行三角剖分,从而得到曲面的非结构网格,作为三维非结构网格的边界网格.应用推进面法生成网格内点,增量法将生成的内点逐点插入现有网格进行网格细化,得到三维计算域的Delaunay非结构网格.讨论了非结构网格质量优化方法.给出几个算例说明方法的应用.     

A Model for the Shapes of Advected Triangles

Three particles floating on a fluid surface define a triangle. The aim of this paper is to characterise the shape of the triangle, defined by two of its angles, as the three vertices are subject to a complex or turbulent motion. We consider a simple class of models for this process, involving a combination of a random strain of the fluid and Brownian motion of the particles. Following D.G. Kendall, we map the space of triangles to a sphere, whose equator corresponds to degenerate triangles with colinear vertices, with equilaterals at the poles. We map our model to a diffusion process on the surface of the sphere and find an exact solution for the shape distribution. Whereas the action of the random strain tends to make the shape of the triangles infinitely elongated, in the presence of a Brownian diffusion of the vertices, the model has an equilibrium distribution of shapes. We determine here exactly this shape distribution in the simple case where the increments of the strain are diffusive.     

A momentum exchange-based immersed boundary-lattice Boltzmann method for simulating incompressible viscous flows

A momentum exchange-based immersed boundary-lattice Boltzmann method is presented in this Letter for simulating incompressible viscous flows. This method combines the good features of the lattice Boltzmann method (LBM) and the immersed boundary method (IBM) by using two unrelated computational meshes, an Eulerian mesh for the flow domain and a Lagrangian mesh for the solid boundaries in the flow. In this method, the non-slip boundary condition is enforced by introducing a forcing term into the lattice Boltzmann equation (LBE). Unlike the conventional IBM using the penalty method with a user-defined parameter or the direct forcing scheme based on the Navier–Stokes (NS) equations, the forcing term is simply calculated by the momentum exchange of the boundary particle density distribution functions, which are interpolated by the Lagrangian polynomials from the underlying Eulerian mesh. Numerical examples show that the present method can provide very accurate numerical results.     

光滑粒子流体动力学方法固壁处理的一种新型排斥力模型

与传统网格法相比, 光滑粒子流体动力学方法不能直接施加壁面边界条件, 这就限制了该方法在工程中的应用.为此, 本文基于Galerkin加权余量法并结合传统排斥力方法, 推导出一种新的排斥力公式来施加壁面边界条件.该方法不含未知参数, 能在不减小边界粒子尺寸的情形下有效地防止流体粒子穿透壁面, 同时可避免邻近边界的流体粒子的速度及压力振荡. 分别通过静止液柱算例、液柱坍塌算例、容器中液体静止算例及溃坝算 例来验证本文方法的有效性, 并与传统边界处理方法进行对比, 结果表明: 本文方法克服了传统方法存在的缺陷, 是一种有效的固壁边界处理方法. 关键词： 光滑粒子流体动力学法 固壁边界 排斥力 加权余量法     

Adaptive mesh redistribution method for domains with complex boundaries

An adaptive structured mesh redistribution method (ASMRM) that permits smooth transition from non-uniformly distributed boundary points to solution-adaptive interior points and enables the resolution of complex flow in the complex boundary region as well as away from the boundary is proposed. It is a variant of the traditional variational technique. It involves a combination of static and dynamic monitor functions, the former for mesh distribution in the vicinity of a complex boundary and the latter for mesh adaption with the evolving solution elsewhere. Its effectiveness is demonstrated on some example problems, and it is then applied to a chevron nozzle. The proposed method is shown to be capable of generating a mesh with a good balance of orthogonality and smoothness in the entire domain.     

Two-dimensional finite element mesh generation algorithm for electromagnetic field calculation

Two-dimensional finite element mesh generation algorithm for electromagnetic field calculation is proposed in this paper to improve the efficiency and accuracy of electromagnetic calculation. An image boundary extraction algorithm is developed to map the image on the geometric domain. Identification algorithm for the location of nodes in polygon area is proposed to determine the state of the node. To promote the average quality of the mesh and the efficiency of mesh generation, a novel force-based mesh smoothing algorithm is proposed. One test case and a typical electromagnetic calculation are used to testify the effectiveness and efficiency of the proposed algorithm. The results demonstrate that the proposed algorithm can produce a high-quality mesh with less iteration.     

非结构网格的并行生成

研究了非结构网格的并行生成方法.改进了R.Lohner的"波阵面"区域分裂算法以使子网格及其边界更有益于网格并行生成,提出了边界并行优化策略,改善了边界的光滑性;完善了子区域内生成网格时接受新点及新单元的条件,在界面网格生成过程中提出只接受新单元而拒绝新点的策略,节省了机时.     

双参数曲面的泡泡网格化方法

为将双参数曲面离散成高质量的网格,首先在参数域内利用各向异性的非均匀泡泡布点方法优化布点,然后用各向异性Delaunay三角化方法将参数域网格化,最后用映射法得到双参数曲面的离散网格.参数域中的节点由二阶黎曼度量矩阵控制,该度量矩阵由三维曲面的网格度量矩阵和曲面参数方程的梯度计算得到.数值算例表明,泡泡布点法在参数域上能生成满足度量矩阵要求的节点集,将节点连接成网格并投影回曲面,所得曲面网格具有很高的质量.