Transmission spectrum of a dielectric binary multilayered structure with diluted disorder

In this work we investigate the transmission properties of a binary multilayered structure with diluted disorder. This system consists of two interpenetrating sub-sequences. One of them is composed by layers of refractive index n_a and thickness d_a, inserted into the odd positions of a stack. The second sub-sequence consists of randomly distributed layers of type A and B, distributed with probability 1 ? p and p, respectively and inserted into the even sites of the stack. The layer thicknesses were taken to satisfy the Bragg condition n_ad_a = n_bd_b. Using a transfer matrix method, we compute the transmission spectrum, the frequency averaged transmission as a function of the system size and the reduced Lyapunov coefficient for different values of the defect concentration p. For 0 < p < 1 the system depicts a wide band-gap due to the Anderson localization of the electromagnetic modes promoted by the underlying disorder. However, the diluted character of the disorder implies in the absence of the quarter-wavelength resonant mode within the band-gap that usually appears in random binary structures. This particular feature suggests that binary dielectric structures with diluted disorder shall perform better as a wide band-gap filter than uncorrelated disordered multilayer structures.     

Nonlinear optical properties of a series of azobenzene liquid-crystalline materials

The nonlinear optical properties of a series of azobenzene liquid-crystalline materials, which have different side-chain lengths in their molecular structure from one to another, were investigated using Z-scan method under picosecond pulse laser at 532 nm, 1064 nm and CW 488 nm excitation. The mechanism accounting for the process of nonlinear refraction was discussed under different laser excitations. The polymer films possess very large nonlinear refraction at all the three different laser excitations. Especially, the nonlinear refractive index becomes larger as the length of side-chain, where azobenzene group is contained, increases under pulse excitation at 1064 nm.     

Alternative approach to realize all-angle negative refraction and far-field imaging effects via two-dimensional all-solid photonic crystals

We systematically investigate the band structures, equifrequency surfaces, and the intensity distributions of Poynting vector in two-dimensional Si/SiO₂ all-solid photonic crystals with different lattice types. It is found that all-angle negative refraction with effective refractive index of nearly ? 1 and far-field imaging effects can be achieved from all-solid photonic crystals. And more important thing is that, the all-solid photonic crystals can realize all-angle negative refraction at lower frequencies and provide far-field images with higher quality compared with normal air–dielectric photonic crystals. Such improved performance provides an alternative approach to realize all-angle negative refraction in super-lens and super-prisms applications.     

High-negative effective refractive index of silver nanoparticles system in nanocomposite films

We have proved on the basis of the experimental optical reflection and transmission spectra of the nanocomposite film of poly(methyl methacrylate) with silver nanoparticles that (PMMA + Ag) nanocomposite films have quasi-zero refractive indices in the optical wavelength range. We show that to achieve quasi-zero values of the complex index of refraction of composite materials is necessary to achieve high-negative effective refractive index in the system of spherical silver nanoparticles.     

Band-gap engineering of ZnSe quantum dots via a non-TOP green synthesis by use of organometallic selenium compound

Single-step green synthesis of ZnSe quantum dots (QDs) from 1,2,3-selenadiazole and zinc acetate resulted in formation of high-quality mono-disperse ZnSe with engineered band-gap. The present method is a non-TOP green route where oleic acid is used as a surfactant. The size quantization effect can be monitored by UV–visible spectroscopy which shows in the range 370–387 nm (3.20–3.35 eV), a blue shift of about 70–90 nm with respect bulk ZnSe. Photoluminescence measurement revealed band-gap emission at ∼390 nm (3.18 eV, Stokes shift of <10 nm with FWHM <30 nm). Broadened XRD pattern indicated formation of cubic ZnSe and the estimation of particle size from the line broadening at 〈1 1 1〉 matched well the TEM analysis.     

Electroactive copper(II) bimetallic self-assembled multilayers on Si(100)

Silicon (100) surfaces were modified by reacting 4-aminopyridine and Si–Cl bond. These surfaces were further used for tethering copper bimetallic complexes and growing monolayers and multilayers by changing the axial position via Lewis acid–base reactions. In this way, coordination chemistry approach can be used as building blocks for controlling the design of functional surfaces. Furthermore, the outcomes of the several characterization techniques indicate that the complex is spatially oriented suggesting that this simple strategy allows the preparation of three dimensional molecular structures exhibiting spatial order. The structures on surface show interesting electroactive behaviors leading two cathodic signals, that can be related to Cu(II)/Cu(I) and Cu(I)/Cu(0) electro-reduction species (signals at ? 0.15 V and ? 0.50 V) and one peak in the anodic region (? 0.15 V) ascribed to the Cu(0)/Cu(II) electro-oxidation reaction, using an Ag/AgCl saturated electrode and platinum wire as reference and counter electrodes, respectively.     

A long-range,high-resolution optical coherence tomography for physical and environmental measurements

Optical coherence tomography (OCT) is an emerging optical imaging technique that is applied with low coherence interference to perform noninvasive, high-resolution images on internal and surface structures. In this study, we built an optical coherence system and developed a combined envelope-fringe and carrier-fringe technique that can take advantage of high-resolution and long-range for taking physical and environmental measurements. The proposed system demonstrated that the detection resolution of the changes of the refractive index was 1.89 × 10^? 4 for the long-range set-up (i.e. using the envelope-fringe only), and 4.15 × 10^? 5 for the high-resolution set-up (i.e. using the carrier-fringe). In addition, we successfully applied the system to measure the refractive index of a body of water, as the index for determining the pollution condition of different lakes.     

Spatially variant regularization of lateral displacement measurement using variance

The purpose of this work is to confirm the effectiveness of our proposed spatially variant displacement component-dependent regularization for our previously developed ultrasonic two-dimensional (2D) displacement vector measurement methods, i.e., 2D cross-spectrum phase gradient method (CSPGM), 2D autocorrelation method (AM), and 2D Doppler method (DM). Generally, the measurement accuracy of lateral displacement spatially varies and the accuracy is lower than that of axial displacement that is accurate enough. This inaccurate measurement causes an instability in a 2D shear modulus reconstruction. Thus, the spatially variant lateral displacement regularization using the lateral displacement variance will be effective in obtaining an accurate lateral strain measurement and a stable shear modulus reconstruction than a conventional spatially uniform regularization. The effectiveness is verified through agar phantom experiments. The agar phantom [60 mm (height) × 100 mm (lateral width) × 40 mm (elevational width)] that has, at a depth of 10 mm, a circular cylindrical inclusion (dia. = 10 mm) of a higher shear modulus (2.95 and 1.43 × 10⁶ N/m², i.e., relative shear modulus, 2.06) is compressed in the axial direction from the upper surface of the phantom using a commercial linear array type transducer that has a nominal frequency of 7.5-MHz. Because a contrast-to-noise ratio (CNR) expresses the detectability of the inhomogeneous region in the lateral strain image and further has almost the same sense as that of signal-to-noise ratio (SNR) for strain measurement, the obtained results show that the proposed spatially variant lateral displacement regularization yields a more accurate lateral strain measurement as well as a higher detectability in the lateral strain image (e.g., CNRs and SNRs for 2D CSPGM, 2.36 vs 2.27 and 1.74 vs 1.71, respectively). Furthermore, the spatially variant lateral displacement regularization yields a more stable and more accurate 2D shear modulus reconstruction than the uniform regularization (however, for the regularized relative shear modulus reconstructions, slightly accurate, e.g., for 2D CSPGM, 1.51 vs 1.50). These results indicate that the spatially variant displacement component-dependent regularization will enable the 2D shear modulus reconstruction to be used as practical diagnostic and monitoring tools for the effectiveness of various noninvasive therapy techniques of soft tissue diseases (e.g., breast, liver cancers). Application of the regularization to the elevational displacement will also increase the stability of a three-dimensional (3D) reconstruction.     

Two-level discretizations of nonlinear closure models for proper orthogonal decomposition

Proper orthogonal decomposition has been successfully used in the reduced-order modeling of complex systems. Its original promise of computationally efficient, yet accurate approximation of coherent structures in high Reynolds number turbulent flows, however, still remains to be fulfilled. To balance the low computational cost required by reduced-order modeling and the complexity of the targeted flows, appropriate closure modeling strategies need to be employed. Since modern closure models for turbulent flows are generally nonlinear, their efficient numerical discretization within a proper orthogonal decomposition framework is challenging. This paper proposes a two-level method for an efficient and accurate numerical discretization of general nonlinear closure models for proper orthogonal decomposition reduced-order models. The two-level method computes the nonlinear terms of the reduced-order model on a coarse mesh. Compared with a brute force computational approach in which the nonlinear terms are evaluated on the fine mesh at each time step, the two-level method attains the same level of accuracy while dramatically reducing the computational cost. We numerically illustrate these improvements in the two-level method by using it in three settings: the one-dimensional Burgers equation with a small diffusion parameter ν = 10^?3, the two-dimensional flow past a cylinder at Reynolds number Re = 200, and the three-dimensional flow past a cylinder at Reynolds number Re = 1000.     

Photonic crystal fiber sensor based on hybrid mechanisms: Plasmonic and directional resonance coupling

We propose a special refractive index sensor design based on a photonic crystal fiber. Two analyte channels are introduced, with one analyte channel coated with gold layer and the other one without gold layer. A hybrid resonance method is used in the sensor to achieve a large dynamic index range, where surface plasmon resonance occurs when the analyte index is lower than that of the fiber material, while the core mode couples with the resonant mode of the adjacent analyte-filled cylinder when the analyte index is larger than the fiber material. When considering fluorinated polymer fibers, a broad index range of analyte refractive index from 1.25 to 1.45 with high sensitivity can be achieved. The maximal sensitivities reach 1.4 × 10⁴ nm/RIU and 2.7 × 10⁴ nm/RIU respectively when refractive index is in the range of 1.25 to 1.383 and 1.383 to 1.45. The sensor characteristics, make this simple sensor very interesting for detecting a wide range of fluid's refractive index or chemical agent concentration.     

Efficient red light phosphorescence emission in simple bi-layered structure organic devices with fluorescent host-phosphorescent guest system

Highly efficient red phosphorescent devices comprising a simple bi-layered structure using tris(1-phenylisoquinoline)iridium (Ir(piq)₃) doped in a narrow band-gap fluorescent host material, bis(10-hydroxybenzo [h] quinolinato)beryllium complex (Bebq₂) are reported. The driving voltage to reach 1000 cd/m² is 3.5 V in Bebq₂:Ir(piq)₃ red phosphorescent device. With a dopant concentration of as low as 4%, the current and power efficiency values of 8.41 cd/A and 7.34 lm/W are obtained in this PHOLEDs, respectively. External quantum efficiency (EQE) of 14.5% is noticed in this red phosphorescent device, promising to high brightness applications.     

Optical bistability in Coumarin-450 doped polymeric samples

Experimental observations of optical bistability in Coumarin-450 dye molecule entrapped in polymeric (PMMA) host inside Fabry–Perot cavity have been reported. Efforts have been made to demonstrate the nonlinear behavior of optical materials in solid form using 532 nm of Nd: YAG laser. The nonlinearity in terms of optical bistability and excited state absorption (ESA) has been discussed. The nonlinearity in Coumarin-450 dye molecule originated from unique intensity dependence of the complex index of refraction. It has been observed that nonlinear refraction dominates over nonlinear absorption in giving rise to the optical bistability. Nonlinear refractive index in both polymeric and liquid samples has been calculated.     

Silicon microspheres for electronic and photonic integration

Silicon microspheres are transparent in the near-infrared telecommunication bands and can be used for electrophotonic integration. We have experimentally observed blue shifts in resonance wavelengths of an electrically driven silicon microsphere of 500 μm in radius, in the near-infrared. We have used a distributed feed back (DFB) laser operating at 1475 nm, and applied electrical potential differences up to 9 V to the silicon microsphere. We have observed blue shifts in the resonance wavelengths up to 0.05 nm, which corresponds to a change in the refractive index of 10⁻⁴.     

Magnetophoretic concentrating of diamagnetic bio-particles and formation of liquid-crystalline chromatin structures

The packing of chromatin during the self-assembly was modeled with a diamagnetic compression achieved under a gradient magnetic separation (magnetophoresis). Nucleoprotein granules separated from cultivated connective tissue and nuclei of chicken red blood cells formed various chromatin mesophases and chiral supra-molecular structures. The applied magnetic pressure accelerated mesophase formations due to the diamagnetic alignment and the concentrating of nucleosome nanoparticles and aggregates (germs) in gradient magnetic fields. Under various magnetic force parameters (H · grad H) ∼ 10⁵–10¹¹ Oe²/cm the different mesophases emerged. Chicken nucleated red blood cells were found to be a convenient model to study the chromatin condensation under influences including electromagnetic factors.     

Third order nonlinear optical properties of ethyltriphenylphosphonium bis(2-thioxo-1,3-dithiole-4,5-dithiolato)aurate (III)

A novel organometallic compound, ethyltriphenylphosphonium bis(2-thioxo-1,3-dithiole-4,5-dithiolato)aurate (III), abbreviated as TPEPADT, was synthesized. The TPEPADT doped poly(methyl methacrylate) (PMMA) thin film with a mass fraction of 1% (1 wt.%) was prepared by using a spin-coating method. The third-order nonlinear optical properties of TPEPADT in acetonitrile solution and TPEPADT-doped PMMA thin film were investigated by using the laser Z-scan technique at the wavelength 1064 nm with laser duration of 20 ps. The linear refractive index of the polymer thin film was also studied. The Z-scan curves revealed that both TPEPADT in acetonitrile solution and the polymer thin film possessed negative nonlinear refraction, exhibiting a self-defocusing effect and nonlinear absorption was negligible under the experimental conditions used. The nonlinear refractive index was calculated to be ?1.9 × 10^?18 m²/W for TPEPADT in acetonitrile solution and ?8.9 × 10^?15 m²/W for the polymer thin film. These results suggest that TPEPADT have potential for the application of all-optical switching devices.     

The study on the nonlinear optical response of Sudan I

The nonlinear optical properties of Sudan I were investigated by a single beam Z-scan technique. The Sudan I ethanol solution exhibited large nonlinear refractive indices under both CW and pulse laser excitations. The nonlinear refractive indices of Sudan I were in the order of ?10^?8 cm²/W under CW 633 nm excitation and ?10^?6 cm²/W under CW 488 nm excitation, respectively. Under the excitation of a pulse 532 nm laser, the nonlinear refractive index n₂ was calculated to be 1.19 × 10^?14 cm²/W. It was discussed that the mechanism accounting for the process of nonlinear refraction was attributed to the laser heating for the CW laser excitation and the electronic effect for the pulse excitation. Moreover, the second hyperpolarizability of Sudan I was also estimated in this paper.     

Negative index photonic crystal lenses based on carbon nanotube arrays

We report a novel utilization of periodic arrays of carbon nanotubes in the realization of diffractive photonic crystal lenses. Carbon nanotube arrays with nanoscale dimensions (lattice constant 400 nm and tube radius 50 nm) displayed a negative refractive index in the optical regime where the wavelength is of the order of array spacing. A detailed computational analysis of band gaps and optical transmission through the nanotubes based planar, convex and concave shaped lenses was performed. Due to the negative-index these lenses behaved in an opposite fashion compared to their conventional counter parts. A plano-concave lens was established and numerically tested, displaying ultra-small focal length of 1.5 μm (～2.3 λ) and a near diffraction-limited spot size of 400 nm (～0.61 λ).     

Improved Statistically Optimal Nearfield Acoustical Holography in subsonically moving fluid medium

Statistically Optimal Nearfield Acoustical Holography (SONAH) can be used to reconstruct three-dimensional sound fields by projecting two-dimensional data measured on a “small” aperture that partially covers a composite sound source in a “static” fluid medium. Here, an improved SONAH procedure is proposed that includes the mean flow effects of a moving fluid medium while the sound source and receivers are stationary. The backward projection performance of the proposed procedure is further improved by using a wavenumber filter to suppress subsonic noise components. Through numerical simulations at Mach 0.6, it is shown that the improved procedure can accurately reconstruct sound source locations and radiation patterns: e.g., the spatially averaged reconstruction errors of the conventional and improved SONAH procedures are 15.40 dB and 0.19 dB, respectively, for a monopole simulation and 21.60 dB and 0.19 dB for an infinite-size panel. The wavenumber filter further reduces spatial noise, e.g., decreasing the reconstruction error from 1.73 dB to 0.19 dB for the panel simulation. An existing data measured in a wind tunnel operating at Mach 0.12 is reused for the validation. The locations and radiation patterns of the two loudspeakers are successfully identified from the sound fields reconstructed by using the proposed SONAH procedure.     

Comparison of compressed sensing diffusion spectrum imaging and diffusion tensor imaging in patients with intracranial masses

PurposeTo compare compressed diffusion spectrum imaging (CS-DSI) with diffusion tensor imaging (DTI) in patients with intracranial masses. We hypothesized that CS-DSI would provide superior visualization of the motor and language tracts.Materials and methodsWe retrospectively analyzed 25 consecutive patients with intracranial masses who underwent DTI and CS-DSI for preoperative planning. Directionally-encoded anisotropy maps, and streamline hand corticospinal motor tracts and arcuate fasciculus language tracts were graded according to a 3-point scale. Tract counts, anisotropy, and lengths were also calculated. Comparisons were made using exact marginal homogeneity, McNemar's and Wilcoxon signed-rank tests.ResultsReaders preferred the CS-DSI over DTI anisotropy maps in 92% of the cases, and the CS-DSI over DTI tracts in 84%. The motor tracts were graded as excellent in 80% of cases for CS-DSI versus 52% for DTI; 58% of the motor tracts graded as acceptable in DTI were graded as excellent in CS-DSI (p = 0.02). The language tracts were graded as excellent in 68% for CS-DSI versus none for DTI; 78% of the language tracts graded as acceptable by DTI were graded as excellent by CS-DSI (p < 0.001). CS-DSI demonstrated smaller normalized mean differences than DTI for motor tract counts, anisotropy and language tract counts (p ≤ 0.01).ConclusionCS-DSI was preferred over DTI for the evaluation of motor and language white matter tracts in patients with intracranial masses. Results suggest that CS-DSI may be more useful than DTI for preoperative planning purposes.     

Design optimization of porous fibrous material for maximizing absorption of sounds under set frequency bands

In this paper, a methodology is proposed for designing porous fibrous material with optimal sound absorption under set frequency bands. The material is assumed to have a rigid frame and a hexagonal arrangement of fibers, and the analytical model derived by Johnson, Champoux and Allard (“JCA model”) is used to investigate the influences of the micro-structural parameters (fiber radius r and gap w) on sound absorption performance, and the macro-acoustic parameters used in JCA model is determined via finite element analysis for the hexagonal micro-structure. Moreover, a mathematical model is constructed to obtain the optimized micro-structure design, with fiber radius and gap as design parameters and average absorption performance of the porous fibrous material under set frequency band as target. Utilizing the constructed optimization model, the microstructure parameters are derived with optimal sound absorption under low frequency (20 ⩽ f < 500 Hz), medium frequency (500 ⩽ f < 2000 Hz) and high frequency (2000 ⩽ f < 15,000 Hz), respectively. On top of that, for a given thickness of porous fibrous material layer, the analytical relationship between fiber radius and optimal porosity under set frequency bands is constructed.