Shear Wave Field Radiated by an Electromagnetic Acoustic Transducer

The horizontally polarized ultrasonic shear wave field emitted by an electromagnetic acoustic transducer （EMAT） is studied by the surface force distribution on the EMAT approximately described as an inhomogeneous horizontal shear force. The shear wave directivity pattern is plotted by numerical calculations based on our strictly analytic solutions of the wave field we presented previously. An experimental system of EMAT generation and piezoelectric transducer reception is set up to check the predictions of the theoretical wave field by measuring the ultrasonic signals through aluminium block. The directivity pattern of the wave field obtained from the experimental results conforms the theoretical prediction, which lays a foundation for engineering applications of EMATs.     

Geoacoustic Inversion Based on a Vector Hydrophone Array

We propose a geoacoustic inversion scheme employing a vector hydrophone array based on the fact that vector hydrophone can provide more acoustic field information than traditional pressure hydrophones. Firstly, the transmission loss of particle velocities is discussed. Secondly, the sediment sound speed is acquired by a matchedfield processing （MFP） procedure, which is the optimization in combination of the pressure field and vertical particle velocity field. Finally, the bottom attenuation is estimated from the transmission loss difference between the vertical particle velocity and the pressure. The inversion method based on the vector hydrophone array mainly has two advantages： One is that the MFP method based on vector field can decrease the uncertain estimation of the sediment sound speed. The other is that the objective function based on the transmission loss difference has good sensitivity to the sediment attenuation and the inverted sediment attenuation is independent of source level. The validity of the inverted parameters is examined by comparison of the numerical results with the experimental data.     

Patch nearfield acoustic holography combined with sound field separation technique applied to a non-free field

The conventional nearfield acoustic holography(NAH) is usually based on the assumption of free-field conditions, and it also requires that the measurement aperture should be larger than the actual source. This paper is to focus on the problem that neither of the above-mentioned requirements can be met, and to examine the feasibility of reconstructing the sound field radiated by partial source, based on double-layer pressure measurements made in a non-free field by using patch NAH combined with sound field separation technique. And also, the sensitivity of the reconstructed result to the measurement error is analyzed in detail. Two experiments involving two speakers in an exterior space and one speaker inside a car cabin are presented. The experimental results demonstrate that the patch NAH based on single-layer pressure measurement cannot obtain a satisfied result due to the influences of disturbing sources and reflections, while the patch NAH based on double-layer pressure measurements can successfully remove these influences and reconstruct the patch sound field effectively.     

Acousto-electric well logging by eccentric source and extraction of shear wave

The nonaxisymmetric acousto-electric field excited by an eccentric acoustic source in the borehole based on Pride seismoelectric theory is considered. It is shown that the acoustic field inside the borehole, converted electric and magnetic fields and coupled fields outside the borehole are composed of an infinitude of multipole fields with different orders. The numerical results show that both the electromagnetic waves and the seismoelectric field in the borehole, and the three components of both electric field and magnetic field can be detected. Measurements on the borehole axis will be of advantage to determining shear velocity information. The components of the symmetric and nonsymmetric acoustic and electromagnetic fields can be strengthened or weakened by adding or subtracting the two full waveforms logged in some azimuths. It may be a new method of directly measuring the shear wave velocity by using the borehole seismoelectric effect.     

A Fast Field Scheme for the Parametric Sound Radiation from Rectangular Aperture Source

A virtual complex source approach has been developed to calculate numerically the ultrasound field generated by a rectangular planar source with high efficiency. The sound field can be treated as the resultant sound pressure from a set of complex virtual sources located at a complex distance, and then by exploiting the integrability of Gaussian function, a substantial analytical reduction to single integral is derived for the second-order field of the sum-, difference-frequency and second harmonic components. The validity of this fast field scheme is confirmed by comparison of numerical results and the experimental data published previously.     

Propagating Properties of Cylindrical Rayleigh Waves Generated by a Pulsed Laser Line Source

A two-dimensional theoretical model is used to ana/yse the acoustic field of cylindrical surface waves generated by a pulsed laser line source in the ablation regime. The complete dispersive curves for cylindrical Rayleigh wave are presented. The laser-generated transient acoustic field of cylindrical Rayleigh waves is calculated and the corresponding laser ultrasonic experiments are carried out. Both the numerical and experimental results are in good agreement.     

Sound Field Calculations of Elliptical Pistons by the Superposition of Two—Dimensional Gaussian Beams

We present an alternative approach to calculate the sound field of ultrasonic transducers.The distribution function of sources is expanded into the superposition of a series of two-dimensional Gaussian functions.The corresponding radiated sound field is expressed as the superposition of these two-dimensional Gaussian beams and is then reduced to the computation of these simple functions.This treatment does not require the condition that the shape of the source is of circular axial symmetry.A numerical example is presented for the uniform elliptical piston transducer and this is in good agreement with the results given by complicated computation.     

Sound field of thermoacoustic tomography based on a modified finite-difference time-domain method

A modified finite-difference time-domain （FDTD） method is proposed for the sound field simulation of the thermoacoustic tomography （TAT） in the acoustic speed inhomogeneous medium. First, the basic equations of the TAT are discretized to difference ones by the FDTD. Then the electromagnetic pulse, the excitation source of the TAT, is modified twice to eliminate the error introduced by high frequency electromagnetic waves. Computer simulations are carried out to validate this method. It is shown that the FDTD method has a better accuracy than the commonly used time-of-flight （TOF） method in the TAT with the inhomogeneous acoustic speed. The error of the FDTD is ten times smaller than that of the TOF in the simulation for the acoustic speed difference larger than 50%. So this FDTD method is an efficient one for the sound field simulation of the TAT and can provide the theoretical basis for the study of reconstruction algorithms of the TAT in the acoustic heterogeneous medium.     

Simulation research on effect of magnetic nanoparticles on physical process of magneto–acoustic tomography with magnetic induction

Magneto–acoustic tomography with magnetic induction(MAT-MI) is a multiphysics coupled imaging technique that is combined with electrical impedance tomography and ultrasound imaging. In order to study the influence of adding magnetic nanoparticles as a contrast agent for MAT-MI on its physical process, firstly, we analyze and compare the electromagnetic and acoustical properties of MAT-MI theoretically before and after adding magnetic nanoparticles, and then construct a two-dimensional(2 D) planar model. Under the guidance of space-time separation theory, we determine the reasonable simulation conditions and solve the electromagnetic field and sound field physical processes in the two modes by using the finite element method. The magnetic flux density, sound pressure distribution, and related one-dimensional(1 D), 2 D, and three-dimensional(3 D) images are obtained. Finally, we make a qualitative and quantitative analysis based on the theoretical and simulation results. The research results show that the peak time of the time item separated from the sound source has a corresponding relationship with the peak time of the sound pressure signal. At this moment, MAMPTMI produces larger sound pressure signals, and the sound pressure distribution of the MAMPT-MI is more uniform, which facilitates the detection and completion of sound source reconstruction. The research results may lay the foundation for the MAT-MI of magnetically responsive nanoparticle in subsequent experiments and even clinical applications.     

电磁声换能器的辐射声场研究

分析了一种圆环形螺线圈、垂直偏置磁场结构的电磁声探头在非铁磁性介质铝中的辐射声场特性。首先根据电磁感应原理对探头进行了物理和数学建模,将表面力源近似成水平和竖直分布的两种,且水平分量远大于竖直分量,推导出该种力源产生的声场的理论解析解。分别数值计算出了横波和纵波的切向和法向指向性,并和实验结果进行对比。实验结果和理论计算符合较好,为此种结构的电磁声换能器的实际工程应用提供了理论依据。      

跑道线圈换能器在铁路重载货车探伤中的应用*

针对在线车轮超声探伤系统的工程应用,研究了跑道线圈电磁超声换能器由洛伦兹力换能机制在钢中产生的辐射声场。根据外磁场和线圈配置,将表面力源近似为非均匀的水平剪切力源,数值计算得到了此力源的辐射声场指向性图,并与实验结果进行比对,结果表明辐射的水平偏振横波具有中间强两侧弱的指向性,对理解跑道形电磁线圈超声换能器的辐射声场和在重载货车车轮辋裂缺陷探伤中的工程应用具有一定的指导意义。     

水下等离子体声源的冲击波负压特性

基于修正的Rayleigh气泡脉动方程对水下等离子体声源放电产生的 强声冲击波的传播过程进行了分析; 利用Euler方程作为控制方程组, 建立了水下等离子体声源的聚束声场模型, 通过仿真计算获得的传播云图对冲击波负压的形成机理进行了直观的理论分析. 结果表明: 经过聚能反射罩反射汇聚得到的聚束波在反射稀疏波和水的惯性作用下, 聚束波周围水域产生了拉伸, 形成负压区, 如果拉伸力大于水的抗拉上限, 就会使得水中形成不连续现象, 即出现空化气泡; 此外聚能罩边缘处产生的衍射波进一步加剧了负压的产生, 边缘衍射波最终与拉伸波叠加, 使冲击波负压达到最大值; 通过对比仿真波形和实验波形, 从而验证和进一步揭示了冲击波负压的形成原因. 研究结果对认识水下冲击波的传播规律和进一步改进等离子体声源的设计具有指导意义. 关键词： 等离子体声源 冲击波负压 聚束声场模型 气泡     

An aeroacoustic approach to phonation

A fluid mechanical, or aeroacoustic, point of view is followed to study possible sources of sound during phonation. Concentration is on two features of the vocal tract during phonation: abrupt area change from the glottis to the vocal tract and the finite length of the vocal tract. With these features, a source of sound distinct from the volume velocity source can be identified and a preliminary account of its effect on the acoustic field given. This source of sound is an oscillating force resulting from an interaction of rotational fluid motion with itself. Because of the schematic nature of the geometry of the model used here, this source may be considerably modified in actual phonation. It is concluded that specification of volume velocity is not enough to specify the source during phonation, even neglecting source-tract interaction.     

Sound radiation from point sources in circular motion

The moving-source approach used by Morfey and Tanna for broad-band sound radiation from a point force in circular motion is adopted in this paper to evaluate the sound radiated in the far field due to point sources of random time variation rotating uniformly in a circle at subsonic speed. It is shown that the sound pressure results (overall and spectral density) for the volume velocity source can be easily extracted from the corresponding results for a rotating point force. An expression for the sound field of a point volume displacement source in arbitrary motion is derived and this is applied to the special case of uniform circular motion. The effects of acceleration of the sources due to circular motion on the radiated sound are established. Applications include noise from tip jet rotors, compressors and marine propellers.     

Mean force on a small sphere in a sound field in a viscous fluid

A mean force exerted on a small rigid sphere by a sound wave in a viscous fluid is calculated. The force is expressed as a sum of drag force coming from the external steady flow existing in the absence of the sphere and contributions that are cross products of velocity and velocity derivatives of the incident field. Because of the drag force and an acoustic streaming generated near the sphere, the mean force does not coincide with the acoustic radiation pressure, i.e., the mean momentum flux carried by the sound field through any surface enclosing the sphere. If the sphere radius R is considerably smaller than the viscous wave penetration depth delta, the drag force can give the leading-order contribution (in powers of delta/R) to the mean force and the latter can then be directed against the radiation pressure. In another limit, delta< or =R, the drag force and acoustic streaming play a minor role, and the mean force reduces to the radiation pressure, which can be expressed through source strengths of the scattered sound field. The effect of viscosity can then be significant only if the incident wave is locally plane traveling.     

A moving medium formulation for prediction of propeller noise at incidence

This paper presents a time domain formulation for the sound field radiated by moving bodies in a uniform steady flow with arbitrary orientation. The aim is to provide a formulation for prediction of noise from body so that effects of crossflow on a propeller can be modeled in the time domain. An established theory of noise generation by a moving source is combined with the moving medium Green's function for derivation of the formulation. A formula with Doppler factor is developed because it is more easily interpreted and is more helpful in examining the physic of systems. Based on the technique presented, the source of asymmetry of the sound field can be explained in terms of physics of a moving source. It is shown that the derived formulation can be interpreted as an extension of formulation 1 and 1A of Farassat based on the Ffowcs Williams and Hawkings (FW–H) equation for moving medium problems. Computational results for a stationary monopole and dipole point source in moving medium, a rotating point force in crossflow, a model of helicopter blade at incidence and a propeller case with subsonic tips at incidence verify the formulation.     

2D/3D CFETR真空室电磁计算

基于ANSYS对CFETR真空室简化模型进行了2D/3D电磁分析,得到了真空室磁场强度以及电磁力的分布。分析结果显示2D/3D真空室的磁场强度及电磁力分布基本一致,这表明了可以使用2D模型替代3D模型对未来真空室简化模型进行电磁分析。