稀土配合物Eu(asprin)_3phen发光特性的研究

将稀土配合物Eu(asprin)_3phen掺杂到导电聚合物PVK中,制成结构分别为ITO/PVK:RE配合物/LiF/AI(1),ITO/PVK:RE配合物/PBD/LiF/AI(2)的电致发光(EL)器件。发现二者的电致发光谱存在着较大的差别:在器件(1)中,来自Eu~(3 )的位于594nm(~5D_0→~7F_1)和614nm(~5D_0→~7F_2)处的发光强度大致相当,而在器件(2)中,EL主要来自Eu~(3 )位于614nm的发光,594nm处的发光很弱,与薄膜状态下的光致发光谱(PL)一致。并针对此现象进行了初步讨论。     

电场变化对有机磷光器件中激子形成影响的研究

激子形成区域随电场变化的移动会使得有机电致发光器件(OLEDs)的效率和色度发生改变,从而影响器件的性能.文章首先制备了两种OLED器件,器件1为ITO/PEDOT:PSS/PVK:Ir(ppy)3:DCJTB (100:2:1 wt)/BCP(10 nm)/Alq3(15 nm)/Al,器件2为ITO/PEDOT:PSS/PVK:Ir(ppy)3(100:2wt)/BCP(10 nm)/Alq3(15 nm)/Al,研究了电场强度对单层多掺杂结构器件激子形成的影响.实验发现在多掺杂发光层中,随着电压的增加,Ir(ppy)3,PVK和DCJTB的发光均增强,PVK和DCJTB发光增强更快.对其发光机制进行分析,认为较高电场下,载流子获得较高能量,更容易形成高能量激子,产生宽禁带材料PVK的发光;另一方面,从能级结构分析DCJTB的带隙较窄,俘获更多的载流子发光更强.同时,在器件的电致发光(EL)光谱发现在460 nm处一新的发射峰,发光随着电压的增大相对减弱.为了研究460nm发光的来源,制备了器件:ITO/PEDOT:PSS/PVK:BCP:Ir(ppy)3(x:y:2 wt)/Alq3(15 nm)/Al,改变x,y的比值研究发现,460 nm处的发光依然存在,推测此发光峰应与PVK及BCP之间有关.     

稀土配合物Eu(asprin)3phen发光特性的研究

将稀土配合物Eu(asprin)3phen掺杂到导电聚合物PVK中，制成结构分别为ITO/PVK：RE配合物／LiF／Al(1)，ITO／PVK：RE配合物／PBD/LiF/Al(2)的电致发光(EL)器件。发现二者的电致发光谱存在着较大的差别：在器件(1)中，来自Eu^3 的位于594nm(^5D0→^7F1)和614nm(^5D0→^7F2)处的发光强度大致相当，而在器件(2)中，EL主要来自Eu^3 位于614nm的发光，594nm处的发光很弱，与薄膜状态下的光致发光谱(PL)一致。并针对此现象进行了初步讨论。     

基于PVK的高色纯度高稳定性有机电致红光器件

利用旋涂法和真空蒸镀法相结合的方法,根据能量空间传递的原理制备了PVK ∶ Ir(piq)₂(acac)体系的红色有机电致发光显示器件。器件的结构为ITO/CuPc/PVK ∶ Ir(piq)₂(acac)/BCP/Alq₃/LiF/Al。研究了不同主客体掺杂比对器件发光性能的影响,得到了高色纯度、单色性较好的红光器件。当Ir(piq)₂(acac)掺杂的质量比为1 ∶ 0.08时,器件的综合性能达到最佳,发光峰位于625 nm,CIE坐标为(x=0.66,y=0.33)。通过对各层厚度的合理选择,形成相对优化的微腔结构,充分利用其对光谱的窄化效应,使得器件的EL光谱的发射半峰全宽仅为55 nm,提高了器件的发光性能。器件光谱具有很好的单色性,色纯度达到98.2%。     

有机混合薄膜中的Frster能量转移

通过掺杂不同的染料有机电致发光器件可以得到不同颜色的光发射。掺杂小分子有机材料苝酸四甲酯perylene- 3,4,9,10 -tetracarboxylicacid(TMEP)到蓝色发光聚合物poly(N -vinyl carbazole)聚乙烯基咔唑(PVK),得到了很好的绿光发射。TEMP掺杂质量分数为0.01时,295. 5nm激发波长的荧光光谱可以明显观察到在420 nm处PVK和530 nm处TEMP的发射峰值;当TMEP掺杂质量分数达到0.050.10之间,器件的电致发光光谱和荧光光谱发射峰几乎完全被TEMP的绿光所占据。光谱的转移归因于从聚合物PVK到小分子有机材料TMEP的F -rster能量转移。荧光光谱中随着TMEP掺杂浓度的的增大发射峰值有明显的红移,这种现象被归因于在TMEP高浓度掺杂情况下激基缔合物的形成。激基缔合物的形成从TMEP在薄膜状态下与溶液状态下的荧光光谱的比较中得到证实。     

有机混合薄膜中的F(o)rster能量转移

通过掺杂不同的染料有机电致发光器件可以得到不同颜色的光发射。掺杂小分子有机材料?p酸四甲酯perylene-3,4,9,10-tetracarboxylicacid(TMEP)到蓝色发光聚合物poly(N-vinyl-carbazole)聚乙烯基咔唑(PVK)，得到了很好的绿光发射。TEMP掺杂质量分数为0.01时，295. 5nm激发波长的荧光光谱可以明显观察到在420 nm处PVK和530 nm处TEMP的发射峰值；当TMEP掺杂质量分数达到0.05～0.10之间，器件的电致发光光谱和荧光光谱发射峰几乎完全被TEMP的绿光所占据。光谱的转移归因于从聚合物PVK到小分子有机材料TMEP的Forster能量转移。荧光光谱中随着TMEP掺杂浓度的的增大发射峰值有明显的红移，这种现象被归因于在TMEP高浓度掺杂情况下激基缔合物的形成。激基缔合物的形成从TMEP在薄膜状态下与溶液状态下的荧光光谱的比较中得到证实。     

两种铽配合物与PVK混合体系的发光机理研究

研究了稀土配合物Tb(p-MBA)3phen(样品Ⅰ)和Tb(p-ClBA)3phen(样品Ⅱ)与导电聚合物材料PVK掺杂体系的光致发光和电致发光特性.发现在样品Ⅰ与PVK混合薄膜的光致发光中,除了三价铽离子的发光外,还能看到明显的PVK的发光;而在电致发光中,PVK的发光完全被抑制,只能看到Tb3 的绿光发射.对样品Ⅱ与PVK的混合发光层,无论其光致发光谱还是电致发光谱,都没有看到410 nm处PVK的发射.进一步测量两种材料的激发光谱,初步探讨了器件的发光机理.样品Ⅰ的发光可能来源于两个方面,一是PVK到稀土配合物的不完全的能量传递,二是由于载流子俘获机理;样品Ⅱ的发光则是由于PVK到稀土配合物的完全的能量传递.     

PVK三线态激基复合物的发光及其受紫外光辐照的影响

用不同溶剂中的前驱物旋涂成PVK层,制备了ITO/PEDOT:PSS/PVK/Ca:Al器件,以及相同结构不同PVK分子量的器件。通过测试分析认为:器件的电致发光谱中590nm波长处的发光峰来自于PVK三线态的激基复合物,并且发现其强度依赖于PVK的分子构型,即在PVK分子中相邻咔唑基团重叠程度。通过比较不同紫外辐照剂量后的PVK器件的发光,发现适度的UV辐照后的PVK分子构型中相邻咔唑基团处于全重叠的状态增加,在电致发光时会形成更多的三线态激子,因而提高了PLED器件的发光效率。     

TCTA在外电场下的双分子发光现象

制备了三苯胺化合物4,4′,4″-三(咔唑-9-基)三苯胺(TCTA)的单层器件ITO/MoO_3/TCTA/LiF/Al和TCTA/TPBi双层异质结器件ITO/NPB/TCTA/TPBi/Bphen/LiF/Al,研究了TCTA的双分子发光现象。通过测试器件的光电性能和薄膜的稳态光谱,得出以下结论:(1)单层器件的电致发光光谱有425 nm和600 nm两个发光峰。与TCTA薄膜的光致发光光谱对比,可知425 nm附近的蓝色发光峰来源于TCTA单体发光,而600 nm附近的橙色发光应为TCTA二聚体electromer的发光。蓝色和橙色发光混合,使单层器件发光颜色表现为白色,对应色坐标为(0.381,0.343)。(2)TCTA/TPBi双层异质结器件的电致发光光谱为440 nm的单峰,器件的最大发光亮度为930 cd/m~2,发光性能明显优于单层器件。结合薄膜TCTA、TPBi和TCTA/TPBi的光致发光光谱和紫外-可见光吸收光谱,可知双层器件的发光来自TCTA~+TPBi~-电致激基复合物。双层器件表现出良好的色稳定性,电压在6～11 V范围,CIE色坐标为(0.18±0.01,0.14±0.01)。     

掺杂DCJTB聚乙烯咔唑的发光性质

研究了PVK∶DCJTB体系的发光特性。实验结果表明,PVK∶DCJTB薄膜光激发时,PVK和DCJTB之间存在能量传递,DCJTB的浓度从1%增加到2%,能量传递效率明显增强,但仍然不充分。引入Alq3层后的PVK∶DCJTB/Alq3双层薄膜,PVK的发光被有效地抑制了,Alq3明显促进了PVK向DCJTB的能量传递效率,说明Alq3起到了能量传递的"桥梁"作用。而结构为ITO/PVK∶DCJTB/Alq3/LiF(1nm)/Al的器件的电致发光光谱与光致发光光谱明显不同。电致发光时,Alq3层的发光的相对强度比光致发光时大许多,而且发光强度随着驱动电压的增加而增强,说明随电压的增加,有更多的空穴注入到Alq3层,致使载流子在Alq3层的复合几率随电场的增强而增大。     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.