用分子参数预测烷烃衍生物的标准生成焓

利用分子参数,即主原子数(N)、主链碳原子数(N')、相对电负性(Xr)、取代参量(P)和官能团位置参量(q)建立了定量预测醇、硫醇、醚、硫醚、醛、酮、酸和酯等烷烃衍生物的标准生成焓数学模型,相关系数均大于0.999,其计算值与相应的文献值都非常吻合,平均相对误差小于1%.分子参数法的物理意义明确、操作简单、使用方便,是进行定量构效相关(OSPR)研究的一种简便可行的方法.     

由13C NMR化学位移测定值确定烷烃生成焓

本文通过分析烷烃核磁共振碳谱（¹³C NMR）化学位移与生成焓之间的关系,提出由¹³C NMR化学位移的测定值来确定烷烃生成焓的新方法．用53个烷烃分子的¹³C NMR化学位移总和（SCS）、三键数（P3）以及碳原子数目（n）与生成焓实验值进行相关,所得回归方程的相关性良好（相关系数R=0.998 2,标准偏差S=3.5 kJ/mol）．进而,通过随机抽样和留一法证实该方程具有良好的稳定性和预测能力．将烷烃¹³C NMR化学位移与其生成焓定量联系起来,不仅有利于深入理解分子结构与性能关系,还为预测那些难于测定且费时的物理化学性质提供了新思路．     

机械振动理论方法与直链烷烃性质研究

将直链烷烃分子看成是一个多自由度振动系统 ,用机械振动理论中的传递矩阵法计算了C2 ～C3 2 直链烷烃的固有频率 ,分析了固有频率随化合物结构单元的变化规律 .发现各阶固有频率中的基频与直链烷烃的结构型性质呈现出优良的相关性 ,用各阶固有频率之和表示的总频与直链烷烃的加和型性质也呈现出优良的相关性 ,将两者组合后还能够反映直链烷烃的凝聚型性质的变化规律 .在此基础上建立了直链烷烃的物化性能与基频和总频之间的定量相关模型 .用该模型对直链烷烃的电离能、沸点、临界温度、临界压力、密度、粘度、标准生成焓、离子标准生成焓、常压热容、折光指数等 10种不同类型性质的实验数据进行回归分析 ,相关系数均大于 0 .999.     

Thermodynamic Calculation on the Formation of Titanium Hydride

从钛氢化物的组成元素的基本性质出发,利用修正的Miedema生成热模型,对TiHx (1≤x≤2)的标准焓变行了计算. 采用量子力学和统计热力学的方法,计算出了TiH2的振动和电子熵,提出了一种计算TiH2标准熵变的方法. 结果表明,TiHx的标准焓变值随着x的增加呈线性关系减少. 计算得到的TiH2在298.16 K时的标准焓变值、标准熵变值以及吉布斯自由能分别为-142.39 kJ/mol、-143.08 J/(mol?K)和-99.75 kJ/mol. 计算结果与文献中实验或理论计算得到的结果均符合较好,表明所提出的钛氢化物的热力学模型是可行的.     

非金属二元氢化物分子振动固有频率与pKa常数的定量关系

提出了非金属二元氢化物分子振动固有频率的计算原理与方法.将基频和总频作为结构信息指数用于非金属二元氢化物的分子结构与pK_a常数的定量关系研究,结果表明,其相关系数大于0.995,得到的回归方程用于pK_a的计算,计算值与实验值比较,平均绝对误差小于1.82.     

计算饱和醇异构体标准生成焓的新方法

基于极性叠加原理,在成功设计烷烃异构体和多氯代烷烃生成焓计算新方法的基础上,设计了一种计算多元醇异构体生成焓的新方法,并合理地假定任一异构体的原子化焓等于三种键（C-C、C-H和C-O-H键）的键能、极性叠加能项以及氢键能项的加和。用这一模型拟合24种原子化粹数据,得到了标准生成焓的估算公式。为了检验预测的精确性,又设计了一种预测方法,使用在排除液预测的化合物条件下回归得到的参数,预测该化合物的生成焓。按这种方法,预测了24种异构体的生成焓。通过该5参数预测的相对于实验值的各种误差（平均绝对误差、均方根误差和最大绝对误差）不仅比7参数的基团法预测的对应误差小得多,而且比相应实验数据的误差还要小。与键加和法比较,该方法的模型包含了极性叠加能和氢键能量,该两项代表了主要的非键相互作用能,表征了不同异构体的结构差异,并大大减少了参数。     

环烷烃及烷烃的折光指数与结构的关系研究

以分子拓扑学点价和自相关函数研究为基础,设计开发出一种新的以点价计算为基础的结构信息自相关拓扑指数tX.基于多元线性回归技术建立了对环烷烃及其烷烃的折光指数作出估算的定量结构性质关系.点价被定义为βi,由βi建构结构信息自相关拓扑指数tX.得到了它们与64种环烷烃的折光指数(nD)的二元回归方程和与27种烷烃的折光指数的二元回归方程.对环烷烃和烷烃折光指数的计算结果表明,计算值与实验值的一致性令人满意,平均误差为0. 25% .利用建立的模型,对另外5种烷烃的折光指数进行了预测.     

理想气体热容的声学测试技术研究

根据热力学基本定律导出的一些热力学关系式,确定了各种热力学参数之间的普遍关联.只要知道了流体在理想气体状态下热容随温度的函数关系以及流体的状态方程,就能确定出该流体的内能、焓、熵、自由能、自由焓、(火用)以及逸度系数等热力学参数.此外,理想气体状态下的热容数据,还可用以反推分子结构与分子间相互作用的微观特性.因此,用实验方法确定工质在理想气体状态下的热容,对于流体工质热物性的研究具有十分重要的意义和作用.     

高压下Ni_3Al热力学性质的第一性原理研究北大核心CSCD

运用第一性原理方法结合准谐Debye-Grüneisen模型研究了高压下Ni3Al的热力学性质,拟合了Ni3Al的状态方程,计算了不同压强下Ni3Al的弹性模量及吉布斯自由能等热力学性质随温度的变化关系.计算结果表明:采用七阶Birch-Murnaghan方程拟合的晶格常数与实验测量结果吻合较好;零压下弹性模量、吉布斯自由能、焓、熵、热容和体膨胀系数随温度的变化与实验值符合较好;在特定压强下,Ni3Al的弹性模量和吉布斯自由能随温度升高而减小,焓、熵随温度升高而增加;预测的德拜温度约为500K,与实验值符合较好.     

高压下Ni3Al热力学性质的第一性原理研究

运用第一性原理方法结合准谐Debye-Grüneisen模型研究了高压下Ni3Al的热力学性质,拟合了Ni3Al的状态方程,计算了不同压强下Ni3Al的弹性模量及吉布斯自由能等热力学性质随温度的变化关系. 计算结果表明：采用七阶Birch-Murnaghan方程拟合的晶格常数与实验测量结果吻合较好;零压下弹性模量、吉布斯自由能、焓、熵、热容和体膨胀系数随温度的变化与实验值符合较好;在特定压强下,Ni3Al的弹性模量和吉布斯自由能随温度升高而减小,焓、熵随温度升高而增加;预测的德拜温度约为500K,与实验值符合较好.     

Self-organization of five species in a cyclic competition game

Cyclic competition game models, particularly the “rock–paper–scissors” model, play important roles in exploring the problem of multi-species coexistence in spatially ecological systems. We propose an extended “rock–paper–scissors” game to model cyclic interactions among five species, and find that two of the five can coexistent when biodiversity disappears, which is different from the “rock–paper–scissors” game. As the number of fingers is five, we named the new model the “fingers” game, where the thumb, forefinger, middle finger, ring finger, and little finger cyclically dominate their subsequent species and are dominated by their former species. We investigate the “fingers” model in two ways: direct simulations and nonlinear partial differential equations. An important finding is that the number of species in a cyclic competition game has an influence on the emergence of biodiversity. To be specific, the “rock–paper–scissors” model is in favor of maintaining biodiversity in comparison with the “fingers” model when the variables (population size, reproduction rate, selection rate, and migration rate) are the same. It is also shown that the mobility and reproduction rate can promote or jeopardize biodiversity.     

Experimental study on downstep in Chinese intonation

Downstep in pitch contour of Chinese Putonghua is examined using subtly designed sentences by controlling tone combinations. The results show both automatic and nonautomatic downstep phenomena exist in Chinese. In non-automatic downstep, low tones compress downwards the pitch range of the following syllables. and the main influence of downstep is on topline. Low tone not only lower the topline behind it, but also raise the high tones before it, the effects are compatible with each other. In automatic downstep, the topline of pitch contour in intonational phrase is presented as a linear downtrend, but it differs among speakers due to the effect of personal stress practice. In comparison with downstep phenomenon in other tone or non-tone languages, the downstep ratio in Chinese is not constant, and the domain of downstep is not limited within the adjacent tones.     

Contrastive analysis on tone between Putonghua and Taiwan Mandarin

The differences of the pitch and duration of Chinese syllables between Putonghua （PTH） and Taiwan Mandarin （TM） were studied. The speech materials to be used are not only isolated syllables, but also sentences. The results reveal that： For the isolated syllables, T1 and T2 in TM are influenced by Minnan dialect, therefore their pitch are lower than those in PTH. T3 is fall-rise in PTH, while it is fall in TM. Moreover, the syllable duration sequence for different tone is T3〉T2〉T1〉T4 in PTH, while it is T1〉T2〉T3〉T4 in TM. For the syllables in sentences, T2 is mid-rise in PTH, while it is mid-level in TM. And the T3 is longer than T4 but shorter than T1 or T2 in PTH, while it is the shortest in TM. Furthermore the effects of prosodic phrase boundary on duration for different tones are almost the same in PTH, but the lengthening part of T1 or T2 is longer than that of T3 or T4 in TM.     

Abelian-Higgs phase of SU(2) QCD and glueball energy

It is shown that SU(2) QCD admits an dual Abelian-Higgs phase, with a Higgs vacuum of a type-Ⅱ superconductor. This is done by using a connection decomposition for the gluon field and the random-direction approximation. Using a bag picture with soft wall, we presented a calculational procedure for the glueball energy based on the recent proof for wall-vortices [Nucl. Phys. B 741(2006)1].     

Signal generation in an isotropic medium in scanning electron acoustic microscope

Based on the research in Ref. [5][Materials Science and Engineering, 1989; A122： 57 63], an improved model of heat source is set up, the different modes of Lamb wave in an isotropic sample generated by a chopped electron beam at frequency f are obtained with integral transform and normal function expansion method, and the output signal of PZT coupled at the back surface of the sample is found out. The generation mechanism of SEAM （Scanning Electron Acoustic Microscopy） signal is discussed. It shows that the SEAM is a near field imaging technique with high spatial resolution and its best lateral spatial resolution is about 2√2α （α is the radius of the focused electron beam）. Some of experimental results of SEAM images are presented in the paper and it shows that the spatial resolution of SEAM is better than 0.5 μm and smaller than the thermal diffusion length of the sample. Therefore the character of near field imaging in SEAM is also proved experimentally.     

High efficiency filtering using two-dimensional photonic crystal coupled cavity structures

Transmission spectra of coupled cavity structures (CCSs) in two-dimensional (2D) photonic crystals (PCs) are investigated using a coupled mode theory, and an optical filter based on CCS is proposed. The performance of the filter is investigated using finite-difference time-domain (FDTD) method, and the results show that within a very short coupling distance of about 3λ, where λ is the wavelength of signal in vacuum, the incident signals with different frequencies are separated into different channels with a contrast ratio of 20 dB. The advantages of this kind of filter are small size and easily tunable operation frequencies.     

Real-time restoration of rotational blurred image using gradient-loading

The key to the restoration of rotational motion blurred image is how to restore the image under a low cost and to correct the irreversibility of the degradation function matrix.Based on the special qualities of degradation function matrix and precise deduction in space-domain, we present a new approach using gradient-loading for restoration of rotational blurred image.By easily adding a gradient operator, the irreversibility of the original matrix is corrected and can be applied for inverse filtering then.Gradientloading is the optimized approach which combines the advantages of both the approaches using constrained least square filtering and traditional diagonal-loading.Compared with the approach using least square filtering, its peak signal-to-noise ratio (PSNR) is improved from 3.18 to 6.46dB, while the computing time is reduced to 1/2-1/3.Experimental results demonstrate the effectiveness, noise-resistibility, robustness, and low complexity of this approach, which make it more suitable for real-time environment.     

All-Optical Logic Device Using Bent Nonlinear Tapered Y-Junction Waveguide Structure

We propose an all-optical logic device made of a bent tapered Y-junction waveguide with a Kerr-type nonlinear interface. It could provide an AND gate, OR gate, and exclusive-OR (XOR) gate. We could obtain different transmission results by adjusting the bending angle. The numerical simulation results show that the device functions as AND, OR, and XOR gates.     

Real-time, continuous-wave terahertz imaging by a pyroelectric camera

Real-time, continuous-wave terahertz (THz) imaging is demonstrated. A 1.89-THz optically-pumped farinfrared laser is used as the illumination source, and a 124 × 124 element room-temperature pyroelectric camera is adopted as the detector. With this setup, THz images through various wrapping materials are shown. The results show that this imaging system has the potential applications in real-time mail and security inspection.