共查询到19条相似文献,搜索用时 125 毫秒
1.
2.
3.
4.
5.
6.
7.
为提高复杂系统的故障诊断效率,基于故障诊断树原理,提出并实现了一种快速故障方法。实现该方法主要包括六个关键步骤,分别是故障诊断树的梳理、诊断节点代码的编写录入、Labwindows CVI软件与数据库的通信连接、故障诊断树显示及故障诊断推理、故障诊断节点的编辑、故障结论的存储与显示。在此基础上,设计开发了相应的故障诊断软件,并利用该软件对某型装甲车辆炮控系统进行故障诊断。结果表明,该型软件人机交互性好、操作便捷,基于故障诊断树原理的故障诊断方法可较大的提高故障诊断效率,工程应用前景广阔。 相似文献
8.
9.
故障诊断对于机械系统的使用与维护起着重要的作用;为了提高机械系统故障诊断的效率以及直观性,提出了一种使用基于知识的故障诊断方法,即使用有色Petri网诊断方法建立一种通用机械系统故障诊断模型并进行分析。针对数控机床液压元件故障这一案例,首先获取其故障来源建立故障树;其次在故障树基础上运用有色Petri网建模工具CPNTools建立有色Petri网模型;最后对模型进行了仿真分析以模拟故障的传递,进行状态空间分析以判断模型安全性,结果表明所提出的建模方法能够使得故障传递更加直观化,快速了解故障的发展趋势,并表明此模型有着较强的易用性以及通用性。 相似文献
10.
11.
单耗分析理论与结构系数法的对比分析 总被引:2,自引:0,他引:2
本文简要阐述了结构系数法和能源利用的单耗分析理论,并针对链式系统进行了初步的对比分析;尽管都是基于热力学第二定律的分析方法,并且它们的结果有一定的相似性,但结构系数法存在某些错误。比较而言,单耗分析理论显得更全面,也更实用。本文以锅炉供热系统为对象进行了详细的单耗分析,对系统中间子系统的(火用)耗损变化所带来的影响进行了详细的分析,结果证明结构系数法所作的“某一子系统(火用)效率变化,其他子系统(火用)效率不变”的假设是不恰当的, 其结论也是不准确的。 相似文献
12.
13.
利用LNG冷能的混合工质中低温热力循环开拓研究 总被引:11,自引:1,他引:10
为提高中低温余热回收动力系统性能,本文在常规混合工质热力循环(火用)分析基础上,提出了结合LNG冷能利用的新型混合工质热力循环。通过与LNG的有机结合,混合工质热力循环热效率提高14.5个百分点,(火用)效率达到53.6%。为进一步揭示效率提高的原因,我们比较了常规混合工质热力循环与LNG-混合工质热力循环的(火用)损失变化情况。结果表明:LNG-混合工质热力循环高效的关键在于循环平均放热温度的降低以及工质蒸发过程与冷凝过程换热的合理匹配。而LNG冷能的梯级利用则是系统具有较高(火用)效率的根本原因。 相似文献
14.
Exergy analysis is a method that uses the conservation of mass and conservation of energy principles together with the second law of thermodynamics for the analysis, design, and improvement of energy and other systems. The exergy method is a useful tool for furthering the goal of more efficient energy-resource use, for it enables the locations, types, and magnitudes of wastes and losses to be identified and meaningful efficiencies to be determined. The exergy analysis of two-shaft gas turbine arrangements is presented and discussed in this paper. Two configurations (in parallel and series free turbine) are presented here and analyzed separately to identify and quantify the energy and exergy losses. Comparison between the two configurations is presented in terms of work output, efficiency, SFC, exergy destruction, and second-law efficiency for the design conditions. The percentage ratio of the exergy destruction in the individual components to total exergy destruction was found maximum in the combustion chambers (above 90%). The second-law efficiency of series configuration is found to be higher than parallel. 相似文献
15.
考虑环境成本的能量系统(火用)经济学分析模型 总被引:4,自引:0,他引:4
随着可持续发展战略的实施,对传统的(火用)经济学提出了新的挑战。本文在传统佣经济学分析的基础上,将环境成本引入到(火用)经济学分析中,首先提出了“广义子系统”的概念,建立了包括(火用)环境成本平衡在内的各种平衡方程;在系统生产结构的描述中,将系统中的(火用)流划分成外界输入(火用)流、内部(火用)流以及向外界输出(火用)流三类,最终建立了以矩阵形式表示的各种平衡方程,用于求解系统中各股(火用)流的单位(火用)成本、单位(火用)经济成本、单位环境成本、单位综合(火用)经济成本等性能参数。最后针对某国产200MW机组进行了实例计算。 相似文献
16.
The study of the viability of hydrogen production as a sustainable energy source is a current challenge, to satisfy the great world energy demand. There are several techniques to produce hydrogen, either mature or under development. The election of the hydrogen production method will have a high impact on practical sustainability of the hydrogen economy. An important profile for the viability of a process is the calculation of energy and exergy efficiencies, as well as their overall integration into the circular economy. To carry out theoretical energy and exergy analyses we have estimated proposed hydrogen production using different software (DWSIM and MATLAB) and reference conditions. The analysis consolidates methane reforming or auto-thermal reforming as the viable technologies at the present state of the art, with reasonable energy and exergy efficiencies, but pending on the impact of environmental constraints as CO2 emission countermeasures. However, natural gas or electrolysis show very promising results, and should be advanced in their technological and maturity scaling. Electrolysis shows a very good exergy efficiency due to the fact that electricity itself is a high exergy source. Pyrolysis exergy loses are mostly in the form of solid carbon material, which has a very high integration potential into the hydrogen economy. 相似文献
17.
18.
本文针对传统焦炭生产工艺的不足、并应用联产系统整合思路,研究提出新型焦炭动力联产系统.新系统取消了传统炼焦工艺中直接燃用焦炉煤气为炭化室提供炼焦热量的方式,采用外置煤炭燃烧室提供热量,从而实现用低品质煤炭替代高品质焦炉煤气;节省下来的富氢、高热值的焦炉煤气作为燃料提供给联合循环,实现高效洁净发电;改进炼焦过程烟气废热回收方式,使得排烟损失大大降低.分析结果表明,新系统具有优良的热力性能,相对节能率高达15%左右.对系统关键过程的图像(火用)分析分析表明,燃烧过程和换热过程等变革与改进是系统性能提升的关键所在.本文研究将为冶金生产的可持续发展提供新思路与新系统方案. 相似文献
19.
1-N型热交换链的(火用)传递分析 总被引:4,自引:0,他引:4
依据工程传递原理建立1-N型热交换链的传递模型,并确立相应的评价准则。对动力锅炉内热交换过程的 各输元及全过程进行了传递计算及分析,并与传统的传热分析及分析比较,提供了一些新的技术评价信息。 相似文献