Growth of completely (110)-oriented Pt film on Si (100) by using MgO as a buffer by pulsed laser deposition

(110)-textured MgO films were grown on Si (100) with etching and without etching by pulsed laser deposition. The deposited MgO films were shown to be droplets-free. The MgO film was used as a buffer layer to further grow Pt film on Si (100). A completely (110)-oriented Pt film was obtained on such a buffer layer and its surface is very smooth with a roughness of about 7.5 nm over 5×5 μm. This can be used as a new oriented Pt electrode on silicon for devices. Received: 23 January 2001 / Accepted: 27 April 2001 / Published online: 27 June 2001     

Growth of orientation-controlled Pb(Mg,Nb)O3-PbTiO3 thin films on Si(100) by using oriented MgO films as buffers

Thin films of relaxor ferroelectric Pb(Mg,Nb)O₃-PbTiO₃ with different orientations were grown by pulsed-laser deposition on Si(100). By using (111)-, (110)- and (100)-oriented MgO thin film as buffer and the LaNiO₃ thin film as a bottom electrode, (110)- and (100)- oriented or preferred and polycrystalline PMN-PT thin films were obtained. The (110)-oriented PMN-PT thin film showed dielectric permittivity of about 1350 and loss factor cosδ of <0.07. PACS 68.55.Jk; 81.15.Fg; 77.84.Dy     

Electro-optic properties of epitaxial Sr<Subscript>0.6</Subscript>Ba<Subscript>0.4</Subscript>Nb<Subscript>2</Subscript>O<Subscript>6</Subscript> films grown on MgO substrates using Li<Subscript>x</Subscript>Ni<Subscript>2-x</Subscript>O buffer layer

Textured Li_xNi_2-xO (LNO) thin films have been fabricated on (001)MgO substrates by pulsed laser deposition technique. The as-deposited LNO films shows a conductivity of 2.5×10^-3 Ω m and possess a transmittance of about 35% in the visible region. Subsequent deposition of Sr_0.6Ba_0.4Nb₂O₆ (SBN60) thin film on these LNO-coated MgO substrates resulted in a textured SBN layer with a 〈001〉 orientation perpendicular to the substrate plane. Phi scans on the (221) plane of the SBN layer indicated that the films have two in-plane orientations with respect to the substrate. The SBN unit cells were rotated in the plane of the film by ± 8.2° as well as ± 45° with respect to the LNO/MgO substrate. Besides the highly (00l)-orientation, the SBN films also exhibited a dense microstructure as shown by scanning electron microscopy. The electro-optic coefficient (r₃₃) of the SBN film was measured to be 186 pm/V. On the basis of our results, we have demonstrated that the LNO film can be used as a buffer layer as well as a transparent bottom electrode for waveguide applications. The SBN/LNO heterostructure is also a suitable candidate for integrated electro-optics devices. PACS  42.79.Gn; 42.82.Et; 78.20.Ci     

Microstructural investigations of Y2O3 thin films deposited by laser ablation on MgO

The epitaxial relationships and the microstructure of thin Y₂O₃ film, in situ grown by laser ablation at 700 °C under 0.5 mbar oxygen pressure on MgO substrate, are studied by X-ray and HRTEM investigations. X-ray φ-scanexperiments show that Y₂O₃ exhibits two different crystallographic growing directions <111> and <100> on (100) single-crystalline MgO substrate. The <111> growing direction appears with four different epitaxial relationships where the <110> Y₂O₃ in-plane direction is parallel to the <110> in-plane direction of MgO. The <100> growing direction appears with one epitaxial relationship, cube Y₂O₃ on cube MgO. The HRTEM experiments show the columnar aspect of the Y₂O₃ thin film. Both (111) and (100) Y₂O₃-oriented grains are observed in good agreement with the X-ray experiments. Received: 16 May 2000 / Accepted: 22 May 2000 / Published online: 13 September 2000     

Effect of LaNiO3 buffer layers on the structure and electrical properties of sol–gel-derived Pb(Mg1/3Nb2/3)O3PbTiO3 thin films

Pb(Mg_1/3Nb_2/3)O₃PbTiO₃ (PMNT) thin films on Pt/TiO₂/SiO₂/Si substrates with and without a LaNiO₃ (LNO) buffer layer have been prepared using a sol–gel method. Structures and electrical properties of these two films have been investigated and compared. Highly (111)-oriented PMNT thin films with a certain amount of pyrochlore phase are obtained on bare Pt electrodes. On the contrary, (100)-oriented PMNT thin films with pure perovskite phase are formed on Pt electrodes with a LNO buffer layer. Cracks are found in the former but not in the latter. The dielectric constant of PMNT thin films on LNO-buffer Pt electrodes is larger than that on bare Pt electrodes. A great lowering of the leakage current is observed in the films with a LNO buffer layer. The improvement in the electrical properties is attributed to both the elimination of cracks and the suppression of pyrochlore phase in the films. PACS 77.84.Dy; 77.80.-e; 77.22.Gm     

Effect of microstructure of MgO buffer layer on BaTiO3 grown on silicon substrates

MgO ultrathin films were grown on Si(1 0 0) substrates as buffer layers for the growth of ferroelectric BaTiO₃ thin films by laser molecular beam epitaxy (L-MBE). The deposition process of MgO buffer layers grown on silicon was in situ monitored by reflection high-energy electron diffraction (RHEED). The structure of BaTiO₃ films fabricated on MgO buffers was investigated by X-ray diffraction. Biaxially textured MgO was obtained at high laser energy density, but when the laser energy was lowered, MgO buffer was transformed to the form of texture with angular dispersion with the increase of the film thickness. BaTiO₃ films grown on the former buffer were completely (0 0 1) textured, while those on the latter were (0 0 1) preferred orientated. Furthermore, the fabricated MgO buffers and BaTiO₃ films had atomically smooth surface and interface. All these can reveal that the quality of textured MgO buffer is a key factor for the growth of BaTiO₃ films on silicon.     

Highly (100) oriented Pb(Zr<Subscript>0.52</Subscript>Ti<Subscript>0.48</Subscript>)O<Subscript>3</Subscript>/LaNiO<Subscript>3</Subscript> films grown on amorphous substrates by pulsed laser deposition

Pb(Zr_0.52Ti_0.48)O₃ (PZT)/LaNiO₃ (LNO) thin films with highly (100) out of plane orientation were produced on SiO₂/Si(100) and alkaline earth aluminosilicate glass substrates by pulsed laser deposition (PLD). Orientations of both PZT and LNO films were evaluated using X-ray diffraction. The pure (100)-oriented PZT/LNO films were obtained under optimized deposition conditions. Time of flight-secondary ion mass spectrometry analysis showed that LNO could effectively block interdiffusion between the PZT films and the substrates. Fairly smooth surfaces of the PZT films with roughness of about 4 nm were observed using an atomic force microscope. Cross sectional examination revealed that the films grew in columnar grains. The PZT films grown on both SiO₂/Si and glass substrates demonstrated very good ferroelectric characteristic at room temperature with remnant polarization of up to 26 μC/cm². PACS 79.20.DS; 77.84.DY; 78.70.Ck     

Epitaxial growth of yttria-stabilised zirconia buffer layers on X-cut LiNbO3 for superconducting electrodes

We report on the epitaxial growth of yttria-stabilised zirconia (YSZ) buffer layers on X-cut LiNbO₃ (LNO) single crystals by pulsed laser deposition. Despite the low chemical stability of the substrates at high temperature, high quality fully reproducible films were obtained over a relatively broad range of processing conditions. The films were (00h) out-of-plane single oriented and the in-plane edge of the YSZ unit cell was aligned with the polar axis of the LNO. However, the YSZ deposition also promoted the formation of the compound LiNb₃O₈. This compound is epitaxial and located at the interface. The homogeneous YSZ film presents a uniform surface, free of outgrowths and with a low roughness. These characteristics are suitable for the epitaxial growth of other oxides, as has been demonstrated with the preparation of YBa₂Cu₃O₇/CeO₂/YSZ/LNO heterostructures. The superconducting YBa₂Cu₃O₇ films were epitaxial, with the c axis perpendicular to the surface and single in-plane orientation, and presented good transport properties (critical temperatures around 86 K and critical current densities close to 10⁶ A/cm² at 77 K). Received: 5 April 2001 / Accepted: 30 July 2001 / Published online: 30 October 2001     

Thickness dependent magnetic and ferroelectric properties of LaNiO3 buffered BiFeO3 thin films

BiFeO₃ (BFO) thin films with thickness increasing from 40 to 480 nm were successfully grown on LaNiO₃ (LNO) buffered Pt/Ti/SiO₂/Si(100) substrate and the effects of thickness evolution on magnetic and ferroelectric properties are investigated. The LNO buffer layer promotes the growth and crystallization of BFO thin films. Highly (100) orientation is induced for all BFO films regardless of the film thickness together with the dense microstructure. All BFO films exhibited weak ferromagnetic response at room temperature and saturation magnetization is found to decrease with increase in film thickness. Well saturated ferroelectric hysteresis loops were obtained for thicker films; however, the leakage current dominated the ferroelectric properties in thinner films. The leakage current density decreased by three orders of magnitude for 335 nm film compared to 40 nm film, giving rise to enhanced ferroelectric properties for thicker films. The mechanisms for the evolution of ferromagnetic and ferroelectric characteristics are discussed.     

Structure and magnetic properties of γ′-Fe4N films grown on MgO-buffered Si (0 0 1)

γ′-Fe₄N thin films were grown on MgO-buffered Si (1 0 0) by pulsed laser deposition technique. Different crystallographic orientations and in-plane magnetic anisotropies were achieved by varying the growth temperature of the MgO buffer layer. When the MgO buffer layer was grown at room temperature, the γ′-Fe₄N film shows isotropic in-plane magnetic properties without obvious texture; while in-plane magnetic anisotropy was recorded for the γ′-Fe₄N films deposited on a 600 °C-grown-MgO buffer due to the formation of a (1 0 0)-oriented biaxial texture. Such a difference in in-plane magnetic anisotropy is attributed to the epitaxial growth of γ′-Fe₄N film on an MgO buffer with relaxed strain when the MgO layer was grown at a high temperature of 600 °C.