共查询到10条相似文献,搜索用时 78 毫秒
1.
基于激光介质的非均匀内热源模型,利用有限元数值方法,模拟计算了热容模式下高功率激光二极管阵列(LDA) 重复脉冲泵浦片状激光介质的瞬态温度分布和热应力分布及其波前畸变和应力双折射。结果表明:热容模式下,当增益介质不能够被全口径泵浦时,也会出现严重的热效应,介质的表面靠近边缘处会出现大的拉应力集中,介质表面的最大轴向位移和最大拉应力随泵浦光斑尺寸缩小而增大;而当全口径泵浦时,介质表面热形变大大减弱,较小的拉应力存在于介质内部,而且泵浦光斑和介质的几何形状对热分布有很大影响。结果还表明,介质片表面变形和热光效应是产生波前畸变的主要原因,而热应力双折射产生的附加相移与激光介质的切割方向有关,它对光束产生较大的退偏作用,从而影响激光器的输出性能。理论模型得到了实验结果的验证。 相似文献
2.
3.
阵列波导光栅中心波长的温度不稳定性成为限制其应用的主要原因。为了设计温度不敏感阵列波导光栅,结合弹性多层板热应力理论和应力集中效应给出掩埋波导芯层应力的解析解,利用等效折射率法计算阵列波导的有效折射率及其温度系数,考虑波导材料折射率和波导长度随温度的变化得到了硅基二氧化硅阵列波导光栅中心波长的温度系数。并研究了贴有应力板的阵列波导光栅中心波长的温度特性,结果表明在芯片底部贴有0.37 mm厚的铝板时,TE模和TM模中心波长的温度系数分别是5.9 pm/℃和8.0 pm/℃,下降到传统阵列波导光栅中心波长温度系数的一半。 相似文献
4.
5.
Yong Huang Xin-Lin XiaHe-Ping Tan 《Journal of Quantitative Spectroscopy & Radiative Transfer》2002,74(2):217-233
The radiative intensity in a sinusoidal refractive index semitransparent medium layer is solved by the curved ray-tracing method in combination with the pseudo-source adding method. One boundary of the medium layer is an opaque diffuse substrate wall. The other boundary is a semitransparent specular or diffuse surface, from which the medium thermal emission emerges. With considering a linear temperature distribution, the radiative intensity formulae are, respectively, deduced under the two boundary conditions. On the basis of the radiative intensity solutions, the directional and hemispherical emission of the medium layer with a specular surface as well as the hemispherical emission of that with a diffuse surface are calculated. The influences of the optical thickness, sinusoidal refractive index distribution and linear temperature distribution on the thermal emission are investigated. The results show that the effects of refractive index and temperature distribution are significant and are different under the two reflecting modes of the surface. 相似文献
6.
研究了在多脉冲强激光辐照下靶材的热传导与热冲击特性。基于非傅里叶导热定律和热弹性理论,推导出多脉冲激光辐照下靶材温度场和热应力场的解析式;结合适当的边界条件,以不锈钢靶材为例,利用有限差分法和Matlab计算得到了多脉冲强激光辐照下靶材内部过余温度随时间和深度演化情况以及内部热应力的演化规律。计算结果表明:多脉冲激光辐照下靶材热响应在离边界不同截面处温度波形变化出现延迟性,其滞后性能与弛豫时间有关;非傅里叶解中应力波的波前十分陡峭,具有明显的热冲击性。 相似文献
7.
A steady thermal model of photonic-bandgap fiber laser (PBFL) is presented. Temperature distribution in PBFL is analyzed by heat transfer equations and numerical finite-element method (FEM) separately. Thermal stress distribution caused by the temperature difference between the inner and outer claddings is calculated. The results show that the thermal stresses in this fiber structure are low less than the critical tensile stress in fused silica. 相似文献
8.
环形激光二极管抽运棒状激光器中瞬态温度和热应力分析 总被引:14,自引:2,他引:12
直接从激光二极管发光强度的角分布出发,采用光线追迹方法获得激光棒内的热沉积分布,在此基础上采用热传导模型和热力模型,比较了不同抽运功率、不同棒半径下达到稳态温度分布的时间,并且对稳态和瞬态热应力进行了详细模拟计算。结果表明,采用环形激光二极管阵列侧面抽运的棒状激光器中的热效应问题十分严重,不同的抽运结构参量下,温度分布不同;达到稳态所需时间随棒半径增大而增加,而不受抽运功率的影响;抽运功率越大,棒内温差增大,热应力也越大;热破坏主要集中于激光棒中心区域和表面区域。 相似文献
9.
10.
建立了激光二极管阵列(LDA)侧面泵浦棒状Nd:YAG增益介质时变热效应理论计算模型。采用有限元Ansys软件模拟分析了脉冲LDA侧面泵浦大能量固体激光器的时变热效应特性。研究结果表明,所研究的脉冲LDA侧面泵浦大能量Nd:YAG激光器热效应具有时变特性,介质横截面内中心点处的稳态温度场分布随时间呈锯齿形周期变化,锯齿形变化频率为LDA泵浦频率,脉冲LDA泵浦参数对介质稳态温度场分布有较大影响。分析和计算了介质内热梯度、应力双折射以及激光晶体端面效应等导致的晶体热透镜焦距。计算表明,介质的热焦距主要来源于介质内温度梯度引起的热透镜焦距。 相似文献