首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 125 毫秒
1.
钱玉洁  娄思成  张杰 《声学学报》2023,48(1):238-248
提出并研究一种利用两板间微缝进行阻尼耦合的双层微穿孔板(DMPP)吸声体。该吸声体在两层微穿孔板(MPP)之间形成一个宽度小于1mm的微缝,因此其阻尼不仅可由板上的微穿孔提供,还可由两板之间形成的微缝提供。采用声电类比法建立了DMPP转移阻抗的理论模型,并进行实验验证,结果表明理论计算结果与实验吻合较好。然后利用建立的理论模型,对单层MPP和DMPP吸声体的吸声性能进行了对比研究,结果表明,相比于单层MPP,DMPP可以利用微缝提供的阻尼显著改善吸声性能,同时减少实际板厚。最后,对DMPP吸声体的吸声性能及其几何参数的关系进行研究,结果表明,当保持其它结构参数不变时,微缝宽度对DMPP吸声系数的提高存在一个最优值,超过或低于此值会导致吸声系数下降。  相似文献   

2.
王卫辰  冯军  马然 《声学学报》2021,46(5):721-729
微穿孔板几何参数的耦合性及其对整体吸声性能的影响,对于设计微穿孔板吸声体和优化其工作性能具有指导作用。根据微穿孔板吸声体基本理论,研究了穿孔率和穿孔直径双参数耦合作用下微穿孔板吸声体的整体吸声性能。穿孔率和穿孔直径之间的耦合性与其本身取值密切相关,而与板厚和板后腔深无明显关系;在穿孔率-穿孔直径参数域上,吸声体存在吸声系数为1.0的吸收峰,整体吸声性能随穿孔率或穿孔直径从小到大变化,呈现出先增强后减弱的变化趋势。该结论能够准确解释微穿孔板受粉尘污染后吸声性能的变化规律和演变路径。论文的工作为设计微穿孔板吸声体提供了一种新的理论依据和实施方法。   相似文献   

3.
微穿孔板吸声结构水下应用研究   总被引:2,自引:0,他引:2       下载免费PDF全文
王泽锋  胡永明  倪明  罗洪 《应用声学》2008,27(3):161-166
马大猷教授提出的微穿孔板吸声结构在空气噪声降低和隔离方面得到了广泛的应用,但未见水下应用的相关研究和报道。本文将空气中微穿孔板理论应用到水中,得到了水下微穿孔板吸声结构的吸声公式。通过理论分析,得出了微穿孔板结构直接应用于水中无法获得宽频吸收的结论。提出了通过匹配液将微穿孔板间接应用到水下的设想。设计了单层板和双层板吸声结构,并对它们的吸声特性进行了理论分析与仿真。结果表明,本文设计的微穿孔板吸声结构在水中能够获得优于空气中的宽频带吸声效果。实验测量了自制的微穿孔板吸声结构,吸声系数的测量值与理论曲线基本吻合,从而验证了理论分析的正确性。  相似文献   

4.
一种微穿孔板消声器   总被引:3,自引:0,他引:3       下载免费PDF全文
本文根据马大猷教授提出的“微穿孔板吸声体精确理论”,在对微穿孔板消声器结构参数与吸声特性之间的相互影响进行了分析的基础上,设计了微穿孔板消声器并将其应用在新舟60飞机APU(辅助动力装置)降噪的实际工程中,并通过编写的噪音数据采集分析程序,对降噪效果进行了测试和分析,验证出微穿孔板消声器对消除飞机的APU的排气噪声具有良好的消声效果,平均降噪7.16dB。  相似文献   

5.
李晨曦  胡莹  何立燕 《应用声学》2019,38(6):954-960
为拓宽微穿孔板的吸声频带,该文用有限元算法建立了典型微穿孔板和穿入不同数量金属纤维的微穿孔板模型,研究了两种微穿孔板的吸声系数、声阻抗和微孔内法向质点速度的空间分布,并进行了试验验证。有限元仿真和试验数据表明:穿入金属纤维可以拓宽微穿孔板的吸声频带,吸声系数也随纤维根数的增加而下降;吸声系数仿真结果与试验结果趋势一致,仿真模型可以有效模拟穿入纤维前后微穿孔板的吸声特性;穿入金属纤维导致黏滞效应引起的低质点速度区域增大,声阻增加,引起吸声系数的降低,而声抗变化不大。研究发现,有限元仿真方法适用于结构相对复杂的微穿孔结构的声学建模,能直观地体现微孔复杂结构的影响,值得继续深入研究和工程应用。  相似文献   

6.
微穿孔板吸声结构是由微穿孔板与板后空腔组成的共振吸声结构,被认为是继多孔吸声材料之后发展起来的最有吸引力的吸声结构,其吸声特性与结构参数孔径d、板厚t、孔距b及空腔深度D有关,如何按需设计一个有效的微穿孔板吸声结构已成为目前研究的热点。本文从微穿孔板吸声结构和吸声特性混合设计的角度出发,使用面向对象的编程语言C++开发了微穿孔板吸声结构设计平台。与以往设计方法不同,本文开发的软件平台综合考虑了结构参数和吸声特性参数两方面的限制,根据实际应用要求平衡微穿孔板吸声结构的最大吸声系数与吸声带宽之间的制约关系,并以饱满的吸声曲线为目标,提供满足混合设计要求的优化结构参数。  相似文献   

7.
关于微穿孔板吸声体频带宽度极限的讨论   总被引:2,自引:1,他引:1       下载免费PDF全文
焦风雷  刘克  丁辉 《应用声学》2001,20(6):36-40
依据马大猷教授的微穿孔板吸声体准确理论,利用计算机辅助设计对于该结构频带宽度极限情况从理论上进行了讨论,把极限频宽和最大吸声系数的制约关系量化,并得到此情况下应用于低频或高频环境孔径的选用范围,以及此情况下板厚和穿孔率与传统观念不同的特点。以上分析结果以及所提供的结构参数为宽频带微穿孔板的具体设计提供有价值的参考。  相似文献   

8.
不规则孔微穿孔板几何参数无法直接获知,造成吸声性能计算困难,故提出一种微穿孔板几何参数估算方法。将不规则孔等效处理为圆孔,利用马氏理论关于圆孔微穿孔板的基本理论,建立了微穿孔板几何参数估算模型;将参数估算结果用于吸声性能预测,理论计算与实验结果吻合。根据微穿孔板几何参数对高吸声性能区域的影响,探讨了马氏理论适用极限与微穿孔板几何参数的关系,以及微穿孔板受粉尘污染后吸声性能演变规律。将微穿孔板参数点取在面积较大的高吸声性能区域中间部位,可获得较大的马氏理论适用极限;微穿孔板参数点位于高吸声性能区域右上部位时,一定程度的粉尘污染不会降低吸声性能.   相似文献   

9.
张斌  李林凌  卢伟健 《应用声学》2010,29(2):134-140
计算微穿孔板吸声系数时,假设孔间的相互作用可以忽略。计算具有不同直径微孔的穿孔板吸声系数并提高其计算精度,孔间的相互作用不能再忽略。在马大猷、Melling(梅尔林)等前人研究的基础上,根据声波辐射和传播原理,分析微孔之间的相互作用,通过修正微孔的实际等效长度,得到计及孔间相互作用微孔板吸声系数模型,并进行理论计算和实验测试。研究结果表明:影响微穿孔板吸声系数除结构参数外,还应考虑孔间的相互作用;计及微孔板各孔间相互作用,能提高共振频率、吸声系数理论值的计算精度,计算值逼近实验测试结果。  相似文献   

10.
微穿孔板吸声体的研究进展   总被引:5,自引:0,他引:5  
简述了马大猷教授的微穿孔板基本理论、微穿孔板吸声体在扩散声场以及在高声强环境下的理论要点。比较详细地讨论了30年来与马大猷教授所提理论相对应的实验研究结果及应用发展情况。基于马大猷教授的基本理论,提出了一种新的相关衍生结构——管束微穿孔板。对微穿孔板吸声体的发展趋势做了展望。表明:微穿孔板吸声体将成为新世纪的绿色理想吸声材料。  相似文献   

11.
Massive applications of microwave technology have led to a large amount of electromagnetic pollution, which seriously interferes with the normal operation of communication systems in people's daily life. Optically transparent metasurface absorber is emerging as a promising candidate for solving this problem in some specific scenarios. When designing multiband metasurface absorbers, the coupling within the cell structure generally prevents the independent modulation of the absorption effect in each band. The rapid development of deep learning provides a new way for designing high-performance metasurface. Here, a forward network model is built to predict the absorption spectrum of the metasurface absorber. In the network model, 1D (one-dimensional) inverse convolution is used as the upsampling layer, which enables the network model to have a good prediction on small data sets while avoiding overfitting on large data sets. Based on the network model, a dual-band optically transparent metasurface absorber is also designed by employing the neural-adjoint (NA) method. The results taking advantage of deep learning method for high-efficiency design of metasurface absorbers without considering the coupling effect, have shown great capability to optimize the absorption efficiency of different frequency bands independently, which may provide an alternative way to design other multiband microwave devices.  相似文献   

12.
柳强  巩马理等 《光学学报》2003,23(3):26-329
利用固体可饱和吸收体砷化镓(GaAs)作为被动调Q元件,实现了激光二极管抽运平-凹腔掺钕钒酸钇(Nd:YVO4)激光调Q运转,详细测量了砷化镓被动调QNd:YVO4激光输出特性,获得脉宽15ns,重复频率470kHz,光束质量M^2=1.31的激光输出,调Q激光运转阈值为500mW,并数值求解了砷化镓被动调Q速率方程,讨论了被动调Q机理以及调Q脉冲宽度和脉冲重复频率对抽运速率的依赖关系,理论计算结果与实验结果相一致。  相似文献   

13.
Metal-backed cholesteric absorbers for microwave frequencies are presented, and their circular-polarization-sensitive absorption properties are numerically illustrated.  相似文献   

14.
刘立国  吴微微  吴礼林  莫锦军  付云起  袁乃昌 《物理学报》2013,62(13):130203-130203
本文实现了一种新颖的等效环路有限差分算法, 这种算法借鉴传输线算法的思想, 在Yee氏网格中引入等效集总元件, 包括常规介质中的等效串联电感、并联电容和左手材料中的等效并联电感、串联电容等. 良好的物理思想使其可以提供适用色散介质计算的收敛性条件, 更加适合仿真计算频率选择表面和超材料等色散介质. 为了提高其计算效率, 研究了核内加速技术, 这种技术理论上可达到最高4倍的加速, 实际应用中得到2倍左右的加速效果. 使用该算法进行了超材料吸波体结构的设计, 通过单双环电阻加载实现宽带电磁波吸收功能. 隐身天线罩对于实现天线的带外隐身有着重要作用, 利用该算法设计了工作频率为1 GHz, 隐身频带在3 GHz到9 GHz的天线罩. 并与两个加工样品的测量结果进行了比较, 对比的结果验证了算法的正确性. 同时核内加速技术的有效性也通过仿真时间比较得到了验证. 关键词: 等效环路有限差分算法 核内加速 超材料吸波体 隐身天线罩  相似文献   

15.
本文主要介绍了二维可饱和吸收体材料在固体激光器中的应用与研究进展。简要介绍了新型二维材料的性质和优点。以石墨烯、拓扑绝缘体、过渡金属硫化物和黑磷等新型二维材料为例分析了它们在固体激光器中实现调Q或锁模的过程,展示了二维材料在脉冲固体激光研究中的重要应用前景。二维材料与固体激光器的结合,可进一步推进二维材料的研究,有望开发出大量新型固体激光器件并且作为基础光源应用于多个领域,推动相关领域的发展。  相似文献   

16.
Lead sulfide (PbS) is a nanomaterial with excellent optical and chemical properties, such as a narrow bandgap (0.37 eV), high thermal damage threshold, and high stability. Obviously, it is appropriate as a saturable absorber (SA) device for ultrafast photonics. However, PbS nanoparticles (NPs) as the SA of ultrashort harmonic mode-locked pulse still haven't been demonstrated at present. In this paper, the PbS NPs are made into an SA-device-based microfiber by optical deposition method and connected in an integrated Erbium-doped fiber laser. And both characteristics and nonlinear optical properties of PbS NPs have been systemically investigated. A fundamental frequency mode-locked pulsed laser is proposed, whose central wavelength is 1560 nm, and the pulse width is 1 ps. In addition, high repetition rate operations are achieved, with a maximum repetition rate of 833 MHz. This is the first time that PbS NPs are used to generate 96th-order harmonic mode-locking, and the corresponding pulse duration is 987 fs. It is demonstrated that PbS NPs are a kind of SA photonic material with excellent performance. It can improve the communication capacity by applying fiber communication, and it has potential application value even in material processing and optical comb.  相似文献   

17.
本文分析了电环形谐振腔的几何参数对超材料吸收体吸收率的影响。文中详细分析了电环形谐振腔参数、介电层(间隔物)厚度和电环形谐振腔厚度对超材料吸收体的影响,在此基础上,设置正交实验分析了几种参数的综合影响,最终获得超材料的理论吸收率。根据上述结果,制备了2个超材料吸收体的原理样机,经实验测得,原理样机的窄带吸收率高于98%。本文的研究成果为高性能吸收器的设计提供了指导。  相似文献   

18.
There is currently considerable interest in developing sustainable absorbers, either from biomass materials or recycled materials, and it is the former that is the subject of this paper. A number of potential candidate materials are available from the biomass in the form of organic fibres. Non-fibrous materials, such as configurations of whole straw or reed, can also act as sound absorbers. A combination of impedance tube and reverberation chamber measurements have been carried out for a number of biomass materials and the effectiveness of current models for the prediction of the absorptive properties of natural fibres has been investigated. Examination of the acoustical characteristics of a range of natural fibres has confirmed their effectiveness as porous sound absorbers and also the limitations of current models for predicting their performance. Examination of the acoustical performance of materials consisting of different configurations of whole reeds and straws has revealed that these also possess considerable potential for application as broadband sound absorbers with particularly good low frequency absorption characteristics. The combination of natural fibres and whole reeds offer the possibility of developing a range of sustainable absorbers which act very effectively across the complete audio frequency range.  相似文献   

19.
Inorganic UV absorbers which are widely used today were originally designed neither as a UV blocker in coatings applications, nor for wood protection. In recent years however, there has been extensive interest in these compounds, especially with regard to their properties as a UV blocker in coating applications.In this work, we carried out a comparative study to look into some inorganic and organic UV absorbers used in wood coating applications. The aim of this study is to determine the photostabilisation performances of each type of UV absorbers, to seek possible synergies and the influences of different wood species. We have also searched to find eventual correlation between these performances and the influence of UV absorbers on the film properties. Our study has compared the performances of the following UV absorbers: hombitec RM 300, hombitec RM 400 from the Sachtleben Company; transparent yellow and red iron oxides from Sayerlack as inorganic UV absorbers; organic UV absorbers Tinuvin 1130 and Tinuvin 5151 from Ciba Company.The study was carried out on three wood species: Abies grandis, tauari and European oak.The environmental constraints (in particular the limitation of the emission of volatile organic compounds VOCs) directed our choice towards aqueous formulations marketed by the Sayerlack Arch Coatings Company.The results obtained after 800 h of dry ageing showed that the Tinuvins and the hombitecs present better wood photostabilisations.On the other hand in wet ageing, with the hombitec, there are appearances of some cracks and an increase in the roughness of the surface. This phenomenon is absent when the Tinuvins are used. With regard to these results, the thermomechanical analyses relating to the follow-up of the change of the glass transition temperature (Tg) of the various coating systems, show a different behaviour between the two types of absorbers. However, contrary to organic UV absorbers, inorganic ones tend to increase Tg during ageing, and, consequently decrease the flexibility of films. These phenomena can lead to the appearance of cracks found in the case of the wet weathering.  相似文献   

20.
A metamaterial absorber is proposed that functions in the medium- (3–5 µm) and long-wavelength (8–12 µm) infrared (medium-wavelength infrared, MWIR, and long-wavelength infrared, LWIR, respectively) regions. The proposed design, which consists of periodic cells, can be tuned to achieve single-band or dual-band light absorption by changing the periodicity of the structure. Each cell forming the metamaterial absorber consists of a bottom metal plate (Al), a top metal disk (Ti), and an intermediate dielectric medium (Si or ZnS) in which a metal disk (Ti) is embedded. For a period of 0.85 µm, the absorber achieves broadband absorption in the LWIR region, with an average absorption of 92.1%. Further, the absorber shows acceptable tolerance to irradiation at oblique incidence. For a period of 2 µm, a peak absorption of 99.05% is achieved in the MWIR region, thereby providing dual-band absorption. Tuning the periodicity of the structure enhances the localized surface plasmon resonance, with the absorption mechanism explained by establishing an equivalent parallel LC circuit. The absorption properties demonstrated by the proposed metamaterial absorber are promising for thermal imaging and infrared spectroscopy.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号