Effect of biotite content of hydrogels on enhanced removal of methylene blue from aqueous solution

A series of chitosan-g-poly(acrylic acid)/biotite (CTS-g-PAA/BT) hydrogels with unique clay biotite (BT) were prepared and used to remove cationic dye methylene blue (MB) from aqueous solution by batch adsorption experiments. Variables of the system including BT content, initial pH, contact time, initial concentration, and temperature affecting the adsorption efficiency of MB by CTS-g-PAA/BT hydrogels were investigated. Kinetic studies indicated that the adsorption data well followed pseudo-second-order kinetics. Langmuir and Freundlich isotherm models were applied to experimental equilibrium data of MB adsorption depending on temperature. The adsorption equilibrium data obeyed Langmuir isotherm, and the monolayer adsorption capacity calculated from the Langmuir isotherm was 2,125.70 mg/g for CTS-g-PAA/10% BT at 30 °C. The adsorption capacity was much higher compared with other hydrogels with the same content of other clays. The introduction of BT into the hydrogel could effectively improve its adsorption properties and reduce the cost. Thermodynamic parameters were evaluated for the dye-adsorbent systems and revealed that the adsorption process was spontaneous and exothermic in nature. All the information gave an indication that CTS-g-PAA/10% BT could potentially be applied as an efficient adsorbent for cationic dye removal from aqueous solution.     

Synthesis of magnetic γ-Fe2O3-based nanomaterial for ultrasonic assisted dyes adsorption: Modeling and optimization

γ-Fe₂O₃ nanoparticles were synthesized and loaded on activated carbon. The prepared nanomaterial was characterized by field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDX), Fourier transforms infrared spectroscopy (FT-IR) and X-ray diffraction (XRD). The γ-Fe₂O₃ nanoparticle-loaded activated carbon (γ-Fe₂O₃-NPs-AC) was used as novel adsorbent for the ultrasonic-assisted removal of methylene blue (MB) and malachite green (MG). Response surface methodology and artificial neural network were applied to model and optimize the adsorption of the MB and MG in their individual and binary solutions followed by the investigation on adsorption isotherm and kinetics. The individual effects of parameters such as pH, mass of adsorbent, ultrasonication time as well as MB and MG concentrations in addition to the effects of their possible interactions on the adsorption process were investigated. The numerical optimization revealed that the optimum adsorption (>99.5% for each dye) is obtained at 0.02 g, 15 mg L⁻¹, 4 min and 7.0 corresponding to the adsorbent mass, each dye concentration, sonication time and pH, respectively. The Freundlich, Langmuir, Temkin and Dubinin–Radushkevich isotherms were studied. The Langmuir was found to be most applicable isotherm which predicted maximum monolayer adsorption capacities of 195.55 and 207.04 mg g⁻¹ for the adsorption of MB and MG, respectively. The pseudo-second order model was found to be applicable for the adsorption kinetics. Blank experiments (without any adsorbent) were run to investigate the possible degradation of the dyes studied in presence of ultrasonication. No dyes degradation was observed.     

Removal of Congo red dye from aqueous solution with nickel-based metal-organic framework/graphene oxide composites prepared by ultrasonic wave-assisted ball milling

Metal-organic frameworks (MOFs) were successfully synthesized by ultrasonic wave-assisted ball milling. In the absence of organic solvent, the coupling effect of ultrasonic wave and mechanical force played an significant role in the synthesis of MOFs. Adsorption of Congo red (CR) was studied in view of adsorption kinetic, isotherm and thermodynamics. The adsorbent was carried out using X-ray diffraction (XRD), thermogravimetric analysis (TGA), N₂ adsorption-desorption isotherms, Raman spectroscopy and scanning electron microscope (SEM) methods. It was found that pseudo-second-order kinetic model and Freundlich adsorption isotherm matched well for the adsorption of CR onto nickel-based metal-organic framework/graphene oxide composites (Ni-MOF/GO). The results of the adsorption thermodynamics indicated that the adsorption process was a spontaneous and endothermic process. The adsorption capacity of graphene oxide/metal-organic frameworks (GO/MOFs) for CR reached 2489 mg/g, much higher than previous reports. It was demonstrated that an increase in the number of active metal sites can dramatically improve the adsorption capacity of dye. A suitable dry temperature is beneficial for the improvement of adsorption capacity for dye. In this paper, the adsorption results indicated that ultrasonic wave-assisted ball milling has a good prospect for synthesis of MOFs with excellent adsorption performance.     

One-step fabricated Fe3O4@C core–shell composites for dye removal: Kinetics,equilibrium and thermodynamics

B-Fe₃O₄@C core–shell composites were synthesized via one-pot hydrothermal carbonization (HTC) process and used as an adsorbent for the removal of methylene blue (MB) from aqueous solution. By using sodium borate as the catalyst, the hydrothermal carbonization process of B-Fe₃O₄@C core–shell composites was optimized and a higher surface area was obtained. The adsorbent was characterized by XRD, Raman spectra, SEM, TEM and N₂ adsorption/desorption isotherms. We studied the dye adsorption process at different conditions and analyzed the data by employing the Langmuir and Freundlich models, and the equilibrium data fitted well with both models. Kinetic analyses were conducted by using the Lagergren pseudo-first-order and pseudo-second-order model and the results showed that the adsorption process was more consistent with the pseudo-second-order kinetics. To better understand the dye adsorption process from the thermodynamics perspective, we also calculated ΔH^ο, ΔS^ο, ΔG^ο and E_a, the results suggesting that the MB adsorption process was physisorption endothermic process, and spontaneous at room temperature. The as-synthesized B-Fe₃O₄@C showing high magnetic sensitivity provides a facile and efficient way to recycle from aqueous solution.     

Improved adsorption performance of nanostructured composite by ultrasonic wave: Optimization through response surface methodology,isotherm and kinetic studies

In this work, ultrasound-assisted adsorption of an anionic dye, sunset yellow (SY) and cationic dyes, malachite green (MG), methylene blue (MB) and their ternary dye solutions onto Cu@ Mn-ZnS-NPs-AC from water aqueous was optimized by response surface methodology (RSM) using the central composite design (CCD). The adsorbent was characterized using Field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), Energy-dispersive X-ray spectroscopy (EDX) and EDX mapping images. The effects of various parameters such as pH, sonication time, adsorbent mass and initial concentrations of SY, MG and MB were examined. A total 33 experiments were conducted to establish a quadratic model. Cu@ Mn-ZnS-NPs-AC has the maximum adsorption efficiency (>99.5%) when the pH, sonication time, adsorbent mass and initial concentrations of SY, MG and MB were optimally set as 6.0, 5 min, 0.02 g, 9, 12 and 12 mg L⁻¹, respectively. Sonication time has a statistically significant effect on the selected responses. Langmuir isotherm model was found to be best fitted to adsorption and adsorption capacities were 67.5 mg g⁻¹ for SY, 74.6 mg g⁻¹ for MG and 72.9 mg g⁻¹ for MB. Four kinetic models (pseudo-first order, pseudo-second order, Weber–Morris intraparticle diffusion rate and Elovich) were tested to correlate the experimental data and the sorption was fitted well with the pseudo-second order kinetic model.     

Optimization of the ultrasonic assisted removal of methylene blue by gold nanoparticles loaded on activated carbon using experimental design methodology

The present study was focused on the removal of methylene blue (MB) from aqueous solution by ultrasound-assisted adsorption onto the gold nanoparticles loaded on activated carbon (Au-NP-AC). This nanomaterial was characterized using different techniques such as SEM, XRD, and BET. The effects of variables such as pH, initial dye concentration, adsorbent dosage (g), temperature and sonication time (min) on MB removal were studied and using central composite design (CCD) and the optimum experimental conditions were found with desirability function (DF) combined response surface methodology (RSM). Fitting the experimental equilibrium data to various isotherm models such as Langmuir, Freundlich, Tempkin and Dubinin–Radushkevich models show the suitability and applicability of the Langmuir model. Analysis of experimental adsorption data to various kinetic models such as pseudo-first and second order, Elovich and intraparticle diffusion models show the applicability of the second-order equation model. The small amount of proposed adsorbent (0.01 g) is applicable for successful removal of MB (RE > 95%) in short time (1.6 min) with high adsorption capacity (104–185 mg g⁻¹).     

Ultrasound assisted synthesis of polyacrylic acid–nanoclay nanocomposite and its application in sonosorption studies of malachite green dye

Synthesis of nanoclay nanocomposite has been undertaken by using polyacryalic acid (PAA) in aqueous medium and ultrasound environment and its application in dye removal has been investigated. The synthesized product was characterized by using FTIR and XRD techniques. The sonosorption capacity of the product namely PAA–nanoclay composite was determined by choosing malachite green (MG) dye as a model pollutant. The effects of various parameters such as nanocomposite loading, pH, various process conditions etc. have been studied. On comparing the results obtained with that of nanoclay as an adsorbent, it was found for an initial concentration of 500 mg/l, the PAA–nanoclay nanocomposite exhibited higher percentage of pollutant removal (68%) and for nanoclay it was 54%. The adsorption data has been correlated using Langmuir and Freundlich models. The fit of the Freundlich isotherm model was found to be good in the entire range of concentration for the experimental sorption data obtained on the nanoclay nanocomposite. A plausible reaction mechanism for use of PAA–nanoclay nanocomposite as an adsorbent is also proposed.     

Removal of Brilliant Green from wastewater using conventional and ultrasonically prepared poly(acrylic acid) hydrogel loaded with kaolin clay: A comparative study

The present work deals with the removal of Brilliant Green dye from wastewater using a poly(acrylic acid) hydrogel composite (PAA-K hydrogel) prepared by incorporation of kaoline clay. The composite has been synthesized using ultrasound assisted polymerization process as well as the conventional process, with an objective of showing the better effectiveness of ultrasound assisted synthesis. It has been observed that the hydrogel prepared by ultrasound assisted polymerization process showed better results. The optimum conditions for the removal of dye are pH of 7, temperature of 35 °C, initial dye concentration of 30 mg/L and hydrogel loading of 1 g. The extent of removal of dye increased with an increase in the contact time and initial dye concentration. A pseudo-second-order kinetic model has been developed to explain the adsorption kinetics of dye on the PAA-K hydrogel. Thermodynamic and kinetic parameters indicate that the adsorption process is spontaneous in nature and the PAA-K hydrogel prepared by ultrasound process is a promising adsorbent compared to conventional process. The obtained adsorption data has also been fitted into commonly used adsorption isotherms and it has been found that Freundlich as well as Langmuir adsorption isotherm models fits well to the experimental results.     

Probing the role of hydrolytically stable, 3-aminopropyl triethoxysilane crosslinked chitosan/graphene oxide membrane towards Congo red dye adsorption

In this investigation, the practicability of utilizing 3-aminopropyl triethoxysilane (3-APTES) crosslinked chitosan (Ch)/graphene oxide (GO) membranes were explored for adsorptive removal of anionic dyes from aqueous medium. Membranes were successfully fabricated through solution casting technique. Strong interactions amongst matrix (chitosan), 3-APTES, polyvinylpyrrolidone (PVP) and GO were confirmed by Infrared spectroscopy. Thermal stability of the chitosan was improved by adding graphene oxide and results were verified via thermogravimetric (TGA) analysis. Swelling and hydrolytic results confirmed that 2 %-Ch/PVP was a stable membrane while increasing the amount of 3-APTES in the chitosan nanocomposites membrane decreased its stability in aqueous medium. The adsorption characteristics of the membranes were evaluated by the adsorption of Congo red (CR) dye from aqueous medium. The adsorbent can remove 80% of CR from aqueous medium and follows second order kinetics. This study outlines the possibility of exploring green membranes which can be easily fit in various flow systems.     

Preparation, characterization and dye adsorption properties of γ-Fe2O3/SiO2/chitosan composite

A γ-Fe₂O₃/SiO₂/chitosan composite was prepared by water-in-oil emulsification, and characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM). Effects of various factors, including adsorbent dosage, initial dye concentration, solution pH, and competing anions, on the adsorption of methyl orange from aqueous solutions by the resulting composite were studied by batch adsorption experiments. The adsorption kinetics was found to follow the pseudo-second-order kinetic model, and intraparticle diffusion was related to the adsorption, but not as a sole rate-controlling step. The equilibrium adsorption data were well described by the Freundlich isotherm model. Evaluation of the thermodynamic parameters ΔG°, ΔH°, and ΔS° revealed that the adsorption process was naturally feasible, spontaneous, and exothermic. The composite was proven to be efficient, suitable and promising for the removal of methyl orange from aqueous solutions since it has a relatively higher adsorption capacity than other low-cost adsorbents.