随机电磁涡旋光束的深聚焦特性

基于德拜矢量积分理论,研究了随机电磁涡旋光束经过大数值孔径透镜之后的聚焦特性及透镜的数值孔径、入射光束的偏振度、拓扑荷以及横向相干长度对焦平面附近聚焦光束的光强分布和相干度的影响.结果表明:适当地选择相关参量,可在焦平面上得到椭圆形光斑的光强分布以及平顶光强分布.随机电磁涡旋光束在焦平面上同一点处两个相互垂直分量之间的相干度,不同两点处两个相同分量之间的相干度以及不同两点处两个相互垂直分量之间的相干度研究表明,入射光束的拓扑荷和横向相干长度对聚焦光束的相干性有着十分明显的影响.     

Natural shaping of the cylindrically polarized beams

We have experimentally and theoretically shown that the circularly polarized beam bearing a singly charged optical vortex propagating through a uniaxial crystal can be split after focusing into the radially and azimuthally polarized beams in the vicinity of the focal area provided that the polarization handedness and the vortex topological charge have opposite signs.     

Compound Vortex Metalens with Linearly Polarized Encryption

In view of the rapid development of nano-fabrication technology and the wide application of composite vortex fields, a kind of compound vortex metalens with polarization encryption is proposed. The proposed compound vortex metalens can simultaneously generate compound vortex beams with double annular strengths, unequal topological charges, and specific polarization states in different radial regions, which have the characteristic of higher dimensional singularity. The compound vortex metalens consisting of rectangular nanoholes works under linearly polarized light illumination, and the topological charges of the generated compound vortex beam can be modulated through rotating nanoholes. Simulation results and theoretical analysis verify the reliability of polarization-coded compound vortex beam metalens. The variation of polarized encrypted transmission field with the incident polarized angle shows the broader performance of polarization encryption compound vortex metalens. The multiple singularities and polarization encryption properties of the generated compound vortex beams combining with the integrated metasurface will be helpful for broadening the applications of singular beams.     

Structure of a tightly focused vortex beam in the presence of primary coma

Structure of a tightly focused circularly polarized vortex beam in the presence of primary coma has been studied by using Debye-Wolf diffraction integral. The role of topological charge and handedness of the polarization on the focused structure has been discussed. Results have been presented for the total intensity and squares of the polarization components for left-, and right circularly polarized vortex beams. Impact of coma, on the dark core of an azimuthally polarized non-vortex beam is also investigated and compared with the dark core of a circularly polarized vortex beam. The presence of comatic aberration in the focusing system results in a positional shift of the high intensity lobes, and reduction of the intensity on one side of the center. Effect of coma on the focused structure has also been discussed in the context of STED microscopy.     

Vortex solitons with inhomogeneous polarization in nonlocal self-focusing nonlinear media

Both azimuthally and radially polarized vortex solitons are investigated to be able to exist in highly nonlocal nonlinear media. We get exactly analytical solutions of azimuthally polarized vortex solitons with only polarization singularities and radially polarized vortex solitons with both phase singularities and polarization singularities. Both azimuthally and radially polarized vortex solitons can exist in nonlocal self-focusing nonlinear media with proper modulation of the beam power and the degree of nonlocality. Contrary to those of radially polarized counterparts in local Kerr media, the topological charge can be any integer. When the topological charge m ≠ 0, both phase singularities and polarization singularities work. When m = 0, the polarization singularities work. Azimuthally polarized vortex solitons with polarization singularities corresponds to the linearly polarized vortex solitons with single charge. Our results show that polarization singularities work the same way as phase singularities in some sense.     

STED microscopy based on axially symmetric polarized vortex beams

A stimulated emission depletion(STED) microscopy scheme using axially symmetric polarized vortex beams is proposed based on unique focusing properties of such kinds of beams. The concept of axially symmetric polarized vortex beams is first introduced, and the basic principle about the scheme is described. Simulation results for several typical beams are then shown, including radially polarized vortex beams, azimuthally polarized vortex beams, and high-order axially symmetric polarized vortex beams. The results indicate that sharper doughnut spots and thus higher resolutions can be achieved, showing more flexibility than previous schemes based on flexible modulation of both phase and polarization for incident beams.     

Tight focusing of axially symmetric polarized vortex beams

Tight focusing of axially symmetric polarized vortex beams is studied numerically based on vector diffraction theory. The mathematical expressions for the focused fields are derived. Simulation results show that the focused fields and phase distributions at focus are largely influenced by both the polarization order and topological charge of the incident beams. Moreover, focal spots with flat-topped or tightly-focused patterns can be flexibly achieved by carefully choosing the polar- ization order and the topological charge, which confirms the potential of such beams in wide applications, such as optical tweezers, laser printing, lithography, and material processing.     

The focusing property of vector Bessel-Gauss beams by a high numerical aperture objective

The rich available transverse intensity structure of vector Bessel-Gauss beams make it important to probe into the focusing property by high numerical aperture objective. In this paper, we obtain the analytical expressions of azimuthally, radially and longitudinally polarized components in the focal area of the objective after tight focusing. Theoretical analysis and the numerical simulation show that, the transverse intensity distributions of the focused beams still have doughnut-like structure, two separate peak structure and circularly aligned array structure. The focused beam spots obtained by an objective with annular aperture usually have smaller spots than with circular aperture. The focused beam of the vector Bessel-Gauss beam with lowest mode number m = 0 is a radially and azimuthally polarized doughnut-like beam with no longitudinal component. These properties and results are useful in optical trapping and particle alignment.     

Manipulation of the overall polarization orientation in the focal volume of high numerical objectives

We propose an approach for tuning the three-dimensional polarization of a focusing subwavelength spot by a high numerical aperture objective. The incident beams are composed of a radially polarized beam, an azimuthally polarized beam, and a linearly polarized beam with three different weighting factors, respectively. A specially designed adjustable amplitude angular selector is also inserted at the back aperture of the objective for tuning the polarization azimuthally. It is shown that any desired overall polarization orientation can be obtained. We calculated the overall polarization orientation in the focal volume. It is found that the polar angle of the overall polarization orientation can be arbitrarily tuned by the combination of a radially polarized beam and a linearly polarized beam with different weighting factors, and the azimuthal angle can be tuned by rotating the orientation of the linearly polarized beam azimuthally.     

J0相干角向偏振涡旋光束的深聚焦

通过矢量德拜理论,研究了J0相干角向偏振涡旋光束深聚焦的性质。推导了在焦点区域的光强分布、光谱相干度和偏振度的表达式。数值模拟结果表明,光强分布、相干度和偏振度不仅依赖于相干长度和数值孔径最大角,而且依赖于拓扑电荷数。这种光束在焦平面还可获得非常小的焦点和焦洞。     

Production of radially or azimuthally polarized beams in solid-state lasers and the elimination of thermally induced birefringence effects

Production and amplification of radially and azimuthally (tangentially) polarized laser beams are demonstrated. Based on the different focusing between radially and tangentially polarized light in thermally stressed isotropic laser rods, Nd:YAG laser oscillators were developed to produce low-loss stable oscillation in a single polarization. Pure radially polarized light at 70 W with M2 = 2 and on-axis impure radially polarized light at 150 W with M2 = 2.5 were achieved. The radially polarized beams were then amplified while good beam quality and polarization purity were retained. Complete elimination of thermal-birefringence-induced aberrations was demonstrated. This should allow much better beam quality from rod-based high-power lasers.     

三环非均匀混合偏振同轴矢量光束的聚焦特性

基于Richards-Wolf矢量衍射积分公式,数值分析了同轴三环非均匀混合偏振矢量光束经过高数值孔径透镜的聚焦特性。该矢量光束由同轴三环局域线偏振矢量光束通过一个相位延迟角为δ的液晶相位延迟器产生,光束偏振变为包含线偏振、圆偏振和椭圆偏振的混合态。同轴三环局域线偏振矢量光束的偏振分布是由径向向内偏振的外环光束、径向向外偏振的内环光束和线偏振方向与径向方向夹角为φ2的中环光束构成。数值模拟结果显示该混合偏振矢量光束的聚焦强度分布与参数φ2和相位延迟角δ密切相关,当选取适当的φ2和δ时,在焦平面附近产生沿光轴方向的三维多点光俘获结构——暗光链,这在光学微操纵领域具有潜在的应用价值。     

4Pi focusing of spatially modulated radially polarized vortex beams

We propose a method for generating focal beams with special intensity distributions using radially polarized vortex beams in a 4Pi configuration. A spherical dark-hollow beam and hollow beam array can be obtained by vortex beams with topological charge of m=1. A dark channel can be generated using vortex beams with topological charge of m=2. The length of the well-defined hollow beam array and the dark channel is about 30λ. These interesting beams are useful in optical trapping and manipulation.     

Switchable vortex beam polarization state terahertz multi-layer metasurface

We propose a switchable vortex beam polarization state terahertz multi-layer metasurface, which consists of three-layer elliptical metal crosses, four-layer dielectrics, and two-layer hollow metal circles, which are alternately superimposed. Under the normal incidence of left-handed circularly polarized (LCP) wave and the right-handed circularly polarized (RCP) waves, the proposed structure realizes three independent control functions, i.e., focused and vortex beam, vortex beam with different topological charges, and polarization states switching, and azimuth switching of two vortex beams with different polarization states. The results show that the proposed metasurface provides a new idea for investigating the multifunctional terahertz wave modulation devices.     

Focusing of linearly-, and circularly polarized Gaussian background vortex beams by a high numerical aperture system afflicted with third-order astigmatism

Effects of third-order astigmatism on the focused structure of linearly and circularly polarized Laguerre-Gaussian beams have been investigated by using vectorial Debye-Wolf integral. The results have been presented for total intensity distribution and squares of the polarization components at the focal plane of a high numerical aperture system, for two values of the topological charge. Astigmatism results in the stretching of the intensity pattern as well as of the squares of the polarization components. A split is observed in the intensity pattern of a focused beam having double topological charge, and also in the pattern of the longitudinal polarization component of circularly polarized beam even with unit topological charge.     

Characterizing polarization properties of radially polarized beams

In the present work two methods of characterizing polarization properties of well-known radially polarized beams are discussed in both theoretical aspect and experimental aspect. A rotating linear polarizer used behind the beam is known to be used to qualitatively characterize the polarization properties of a radially polarized beam. In this paper for the first time we give the mathematic model of this characterization process. The proposed model helps to analyze the known experimental results. On the other hand two global parameters have been previously proved to be used to characterize the linear or circular polarization content of the radially polarized beams. In this paper for the first time we propose the theoretical model of determining the two parameters in experiments. Some experimental results on characterizing the polarization properties of the real radially polarized beam produced by using different approaches are shown.     

Generation of a radially polarized doughnut mode of high quality

We present an experimental set-up to generate laser beams with locally varying polarization distribution. In a linear set-up, a radially polarized beam of high quality regarding intensity distribution, polarization and phase-front distortion is generated. This beam can be used for tight focusing. Further applications are discussed.     

Intensity and spatial correlation properties of tightly focused partially coherent radially polarized vortex beams

By expanding the Debye theory into the tight focusing of partially coherent field, the intensity and spatial correlation properties of partially coherent radially polarized vortex beams are studied. Expressions are derived for the intensity distribution and the spectral degree of coherence in the focal region. It is found that the intensity and the transverse and longitudinal coherence degrees in the focal region change with the variation of the topological charge and coherence length of the vortex beam. In addition, the degree of coherence is shown to exhibit phase singularities.     

Generation of radially polarized light beams of high quality using a step-index optical fiber

We present an experimental setup to generate radially polarized beams without using high-cost optical elements. In the setup a four-segment polarization converter is used in front of the fiber to produce a pseudo radially polarized beam. A traditional step-index fiber which supports only LP₀₁ and LP₁₁ modes is then used as a mode-cleaning device. A commercial mechanical fiber-squeezer polarization controller is applied to produce adequate pressure and twist onto the fiber. The four-segment polarization converter and the fiber squeezer polarization controller are adjusted by turns for improving the beam quality in intensity and polarization. Additionally, several methods of characterizing the polarization properties of radially polarized beams are reviewed. One of the latest methods is applied for characterizing the polarization properties of the radially polarized beams produced by using our technique. The results show the highquality of the obtained beams.     

Adaptive correction of vortex laser beam in a closed-loop system with phase only liquid crystal spatial light modulator

We propose and demonstrate the wave front correction of a vortex laser beam by using dual phase only liquid crystal spatial light modulators (LC-SLMs) and a stochastic parallel gradient descent (SPGD) algorithm. One phase only LC-SLM is used to generate vortex laser beam by loading spiral phase screen onto the wave front of input quasi-Gaussian beam. The other phase only LC-SLM under SPGD controller based on the subzone control method adaptively compensates the wave front of vortex laser beam. Numerical simulation and experimental results show that after correction, vortex doughnut like beam is focused into a beam with airy disk pattern distribution in the far field. The adaptive corrections of vortex laser beam with different optical topological charges are studied. The results show that the optical topological charge has little influence on adaptive correction. The powers in the main lobe of far field intensity distributions of vortex laser beams with different optical topological charges are all greatly improved by adaptive correction. The technique proposed in this paper can be used in optical communication, relay mirror and atmospheric turbulence correction.