Precision Mass Measurements of Short-lived Nuclides at the Heavy-ion Storage Ring in Lanzhou

Recent commissioning of the Cooler Storage Ring at the Heavy Ion Research Facility in Lanzhou enabled us to conduct high-precision mass measurements at the Institute of Modern Physics in Lanzhou (IMP). In the past few years, mass measurements were performed using the CSRe-based isochronous mass spectrometry employing the fragmentation of the energetic beams of 58Ni, 78Kr, 86Kr, and 112Sn projectiles. Masses of short-lived nuclides on both sides of the stability valley were addressed. Relative mass precision of down to 10−6 ~ 10−7 is routinely achieved. The mass values were used as an input for dedicated nuclear structure and astrophysics studies, providing for instance new insights into the rp-process of nucleosynthesis in X-ray bursts. In this contribution, we briefly review the so far conducted experiments and the main achieved results, as well as outline the plans for future experiments.     

由58Fe 和209Bi 熔合后的相关衰变过程得到的109号元素的证据

本文报导了合成109号元素的实验。用能量为4.95,5.05和5.15MeV/u 的~(58)Fe 束轰击~(209)Bi 靶,研究了全熔合产物衰变模式的特性。总辐照剂量为7×10~(17)粒子。所用的实验方法是:用静电场速度过滤器在飞行过程中分离向前方向成峰的反应产物,经过飞行时间装置后注入到位置灵敏固态探测器中,测量其动能,估算出质量、入射的时间和位置。以所有的出射粒子的能量和时间来记录很有限的反应产物发生级联α粒子和(或)自发裂变的继发衰变。在5.15 MeV/u 时的一个特别的衰变过程是:在5ms 和22ms 先分别发射两个α粒子,最后,在13s 后发生自发裂变。第一个α粒子的动能为11.10±0.04MeV。对各种可能的解释进行了详细的分析,例如纯属偶然的信号相关,转移反应产物的衰变和从能量上看允许的余核蒸发等。最后表明质量数为266的109号元素的同位素、即全熔合后的单中子蒸发道、从统计的观点看是最好的指定。本文同时也讨论了合成新元素的前景。     

Random-injection-based two-channel chaos with enhanced bandwidth and suppressed time-delay signature by mutually coupled lasers: Proposal and numerical analysis

Simultaneous bandwidth(BW) enhancement and time-delay signature(TDS) suppression of chaotic lasing over a wide range of parameters by mutually coupled semiconductor lasers(MCSLs) with random optical injection are proposed and numerically investigated. The influences of system parameters on TDS suppression(characterized by autocorrelation function(ACF) and permutation entropy(PE) around characteristic time) and chaos BW are investigated. The results show that, with the increasing bias current, the ranges of parameters(detuning and injection strength) for the larger BW(> 20 GHz) are broadened considerably, while the parameter range for optimized TDS(< 0.1) is not shrunk obviously.Under optimized parameters, the system can simultaneously achieve two chaos outputs with enhanced BW(> 20 GHz)and perfect TDS suppression. In addition, the system can generate two-channel high-speed truly physical random number sequences at 200 Gbits/s for each channel.     

Brane world black holes in teleparallel theory equivalent to general relativity and their Killing vectors, energy, momentum and angular momentum

The energy-momentum tensor, which is coordinate-independent, is used to calculate energy, momentum and angular momentum of two different tetrad fields. Although, the two tetrad fields reproduce the same space-time their energies are different. Therefore, a regularized expression of the gravitational energy-momentum tensor of the teleparallel equivalent of general relativity (TEGR), is used to make the energies of the two tetrad fields equal. The definition of the gravitational energy-momentum is used to investigate the energy within the external event horizon. The components of angular momentum associated with these space-times are calculated. In spite of using a static space-time, we get a non-zero component of angular momentum! Therefore, we derive the Killing vectors associated with these space-times using the definition of the Lie derivative of a second rank tensor in the framework of the TEGR to make the picture more clear.     

Quantum fluctuation in excited states of mesoscopic LC circuits at finite temperature

We discuss quantum fluctuation in excited states(named thermo number states) of mesoscopic LC circuits at a finite temperature.By introducing the coherent thermo state into the thermo field dynamics pioneered by Umezawa and using the natural representation of thermo squeezing operator we can concisely derive the fluctuation.The result shows that the noise becomes larger when either temperature or the excitation number increases.     

Pressure effect study on the Ⅰ-Ⅴ property of the GaAs-based resonant tunnelling structure by photoluminescence measurement

This paper discusses the Ⅰ-Ⅴ property of the GaAs-based resonant tunnelling structure(RTS) under external uniaxial pressure by photoluminescence studies.Compressive pressure parallel to the [110] direction,whose value is determined by Hooke's law,is imposed on the sample by a helix micrometer.With the increase of the applied external uniaxial compressive pressure,the blue shift and splitting of the luminescence peaks were observed,which have some influence on the I-V curve of RTS from the point of view of the energy gap,and the splitting became more apparent with applied pressure.Full width at half maximum broadening could also be observed.     

圆周运动公式的圆周图示记忆法

匀速圆周运动是曲线运动章节的教学重点．现行高中及中专教材均以两节的篇幅来讨论这种运动．一节是建立匀速圆周运动的概念,引入描述匀速圆周运动快慢的4个量,即周期(T)、频率(v)、角速度(ω)、线速度(v),并讨论这4个量的关系．另一节则从受力的角度讨论圆周运动的向心力及向心加速度．共涉及6个量．由于这6个量之间彼此存在一定的关系,这就使圆周运动具有较多的公式．如果学生能熟练掌握这些公式以及它们之间相互关系的规律,解题就能     

Function projective synchronization between fractional-order chaotic systems and integer-order chaotic systems

This paper investigates the function projective synchronization between fractional-order chaotic systems and integer-order chaotic systems using the stability theory of fractional-order systems. The function projective synchronization between three-dimensional (3D) integer-order Lorenz chaotic system and 3D fractional-order Chen chaotic system are presented to demonstrate the effectiveness of the proposed scheme.     

An ab initio investigation of the low-lying electronic states of BeH

Potential energy curves(PECs) for the ground state(X 2 Σ +) and the four excited electronic states(A 2 Π,B 2 Π,C 2 Σ +,4 Π) of a BeH molecule are calculated using the multi-configuration reference single and double excited configuration interaction(MRCI) approach in combination with the aug-cc-pVTZ basis sets.The calculation covers the internuclear distance ranging from 0.07 nm to 0.70 nm,and the equilibrium bond length R e and the vertical excited energy T e are determined directly.It is evident that the X2Σ+,A2Π,B2Π,C2Σ+ states are bound and 4Π is a repulsive excited state.With the potentials,all of the vibrational levels and inertial rotation constants are predicted when the rotational quantum number J is set to be equal to zero(J = 0) by numerically solving the radial Schr¨odinger equation of nuclear motion.Then the spectroscopic data are obtained including the rotation coupling constant ω e,the anharmonic constant ωexe,the equilibrium rotation constant Be,and the vibration-rotation coupling constant αe.These values are compared with the theoretical and experimental results currently available,showing that they are in agreement with each other.     

Effects of sea surface temperature, cloud radiative and microphysical processes, and diurnal variations on rainfall in equilibrium cloud-resolving model simulations

The effects of sea surface temperature(SST),cloud radiative and microphysical processes,and diurnal variations on rainfall statistics are documented with grid data from the two-dimensional equilibrium cloud-resolving model simulations.For a rain rate of higher than 3 mm.h 1,water vapor convergence prevails.The rainfall amount decreases with the decrease of SST from 29℃ to 27℃,the inclusion of diurnal variation of SST,or the exclusion of microphysical effects of ice clouds and radiative effects of water clouds,which are primarily associated with the decreases in water vapor convergence.However,the amount of rainfall increases with the increase of SST from 29℃ to 31℃,the exclusion of diurnal variation of solar zenith angle,and the exclusion of the radiative effects of ice clouds,which are primarily related to increases in water vapor convergence.For a rain rate of less than 3 mm.h 1,water vapor divergence prevails.Unlike rainfall statistics for rain rates of higher than 3 mm.h 1,the decrease of SST from 29℃ to 27℃ and the exclusion of radiative effects of water clouds in the presence of radiative effects of ice clouds increase the rainfall amount,which corresponds to the suppression in water vapor divergence.The exclusion of microphysical effects of ice clouds decreases the amount of rainfall,which corresponds to the enhancement in water vapor divergence.The amount of rainfall is less sensitive to the increase of SST from 29℃ to 31℃ and to the radiative effects of water clouds in the absence of the radiative effects of ice clouds.     

Flexural wave band-gaps in phononic metamaterial beam with hybrid shunting circuits

Periodic arrays of hybrid-shunted piezoelectric patches are used to control the band-gaps of phononic metamaterial beams. Passive resistive-inductive(RL) shunting circuits can produce a narrow resonant band-gap(RG), and active negative capacitive(NC) shunting circuits can broaden the Bragg band-gaps(BGs). In this article, active NC shunting circuits and passive resonant RL shunting circuits are connected to the same piezoelectric patches in parallel, which are usually called hybrid shunting circuits, to control the location and the extent of the band-gaps. A super-wide coupled band-gap is generated when the coupling between RG and the BG occurs. The attenuation constant of the infinite periodic structure is predicted by the transfer matrix method, which is compared with the vibration transmittance of a finite periodic structure calculated by the finite element method. Numerical results show that the hybrid-shunting circuits can make the band-gaps wider by appropriately selecting the inductances, negative capacitances, and resistances.     

Analysis of underwater decoupling properties of a locally resonant acoustic metamaterial coating

This paper presents a semi-analytical solution for the vibration and sound radiation of a semi-infinite plate covered by a decoupling layer consisting of locally resonant acoustic metamaterial. Formulations are derived based on a combination use of effective medium theory and the theory of elasticity for the decoupling material. Theoretical results show good agreements between the method developed in this paper and the conventional finite element method(FEM), but the method of this paper is more efficient than FEM. Numerical results also show that system with acoustic metamaterial decoupling layer exhibits significant noise reduction performance at the local resonance frequency of the acoustic metamaterial, and such performance can be ascribed to the vibration suppression of the base plate. It is demonstrated that the effective density of acoustic metamaterial decoupling layer has a great influence on the mechanical impedance of the system. Furthermore, the resonance frequency of locally resonant structure can be effectively predicted by a simple model, and it can be significantly affected by the material properties of the locally resonant structure.     

Band gap control of phononic beam with negative capacitance piezoelectric shunt

Periodic arrays of negative capacitance shunted piezoelectric patches are employed to control the band gaps of phononic beams. The location and the extent of induced band gap depend on the mismatch in impedance generated by each patch. The total impedance mismatch is determined by the added mass and stiffness of each patch as well as the shunting electrical impedance. Therefore, the band gap of the shunted phononic beam can be actively tuned by appropriately selecting the value of negative capacitance. The control of the band gap of phononic beam with negative capacitive shunt is demonstrated numerically by employing transfer matrix method. The result reveals that using negative capacitive shunt to tune the band gap is effective.     

Broadband locally resonant beams containing multiple periodic arrays of attached resonators

The plane wave expansion method is extended to study the flexural wave propagation in locally resonant beams with multiple periodic arrays of attached spring-mass resonators. Complex Bloch wave vectors are calculated to quantify the wave attenuation performance of band gaps. It is shown that a locally resonant beam with multiple arrays of damped resonators can achieve much broader band gaps, at frequencies both below and around the Bragg condition, than a locally resonant beam with only a single array of resonators, although the two systems have the same total resonator masses.     

Band gap structure analysis of phononic crystal rods with hybrid shunted piezoelectric patches

The band gap structures by arranging hybrid shunted piezoelectric materialswith resistance inductive(RL) circuit and negative impedance converter(NIC) closely and at intervals are presented.The theoretical model is built using transfer matrix method.Then the MATLAB computing language is utilized to simulate the band gap structures.Meanwhile,the effects of the resistance,inductance and capacitance on the local resonant gap are studied.By comparing different combinations of resistance,inductance and capacitance as well as different arrangement of circuits,a 13 kHz band gap is reached under the effect of arranging hybrid periodic shunted piezoelectric patches at intervals and the stability of the system is also analyzed.It is proved that utilizing hybrid shunted piezoelectric patches would have a clear impact on the band gap structure of phononic crystal rods.Moreover,the band gap would be clearly enlarged by arranging hybrid piezoelectric patches at intervals.     

Two-dimensional locally resonant phononic crystals with binary structures

The lumped-mass method is applied to study the propagation of elastic waves in two-dimensional binary periodic systems, i.e., periodic soft rubber/epoxy and vacuum/epoxy composites, for which the conventional methods fail or converge very slowly. A comprehensive study is performed for the two-dimensional binary locally resonant phononic crystals, which are composed of periodic soft rubber cylinders immersed in epoxy host. Numerical simulations predict that subfrequency gaps also appear because of the high contrast of mass density and elastic constant of the soft rubber. The locally resonant mechanism in forming the subfrequency gaps is thoroughly analyzed by studying the two-dimensional model and its quasi-one-dimensional mechanical analog. The rule used to judge whether a resonant mode in the phononic crystals can result in a corresponding subfrequency gap or not is found.     

Propagating mode in the photonic gap of 1D resonant Bragg reflector

Concerning “1D resonant photonic crystals”, i.e., 1D periodic arrays of resonant layers with a spacing satisfying the Bragg condition for resonant light, recent topics are summarized together with additional new findings. The central points are about (1) the recent theoretical finding of a new branch in the middle of photonic gap, (2) an approach-dependent controversy about its existence, (3) its consequence as sharp dips in reflectance spectrum and the corresponding internal field patters, indicating its propagating mode character, (4) the comparison between macroscopic and microscopic treatment of resonance effect, and (5) corrected transfer matrix method and its analytical equivalence with nonlocal response theory.     

Temperature-controlled tunable acoustic metamaterial with active band gap and negative bulk modulus

The local resonant band gap and the negative bulk modulus of the acoustic metamaterial with Helmholtz resonators are strongly affected by the temperature of water. In this paper, the acoustic transmission line method (ATLM) is introduced to investigate the influences of the temperature of water on the local resonant band gap and the negative bulk modulus of the acoustic metamaterial. Results show that the relative variations of the local resonant band gap and the negative effective bulk modulus suffering from the change of the temperature of water are approximately equivalent and are up to about 11%. The reason is that the local resonant frequency is proportional to the sound speed of fluid which is strongly effects by the temperature of water. By achieving the unambiguous relationships between these unusual properties of the acoustic metamaterial and the temperature of water, we find that the temperature-controlled acoustic metamaterial with the active band gap and the active negative bulk modulus can be realized in theory. This idea opens a new avenue for the design of the tunable acoustic metamaterial that can modulate the acoustic wave propagation.     

Modulating lamb wave band gaps using an elastic metamaterial plate

Modulating band gaps (extending the bandwidths or shifting into a lower frequency range) is a challenging task in phononic crystals. In this paper, elastic metamaterial plates composed of a square array of “hard” stubs or “soft” stubs on both sides of a 2D binary locally resonant plate are proposed, and their band structures are studied. The dispersion relationships and the displacement fields of the eigenmodes are calculated using finite element methods. Numerical results show that the band gaps are shifted to lower frequencies and the bandwidths are enlarged compared to classic elastic metamaterial plates. A conceptual “analogousrigid mode” that includes an “out-of-plane analogous-rigid mode” and an “in-plane analogous-rigid mode” is developed to explain these phenomena. The “out-of-plane analogous-rigid mode” mainly adjusts the band gaps into the lower frequency range, and the “in-plane analogous-rigid mode” mainly enlarges the bandwidth. Furthermore, the band gap effects of composite “hard” stubs and “soft” stubs are investigated. The results show that the location of the band gaps can be modulated into a relatively lower frequency and the bandwidth can be extended by the use of different composite stubs. These elastic wave properties in the proposed structure can be used to optimize band gaps and possibly produce low-frequency filters and waveguides.     

Coupled-mode analysis for linear fiber Bragg grating made of metamaterial

We derive the coupled-mode equations for a metamaterial fiber Bragg gratings (FBGs). The coupled-mode theory describing wave propagation in periodic structures such as FBG is generalized for studying the transmission and reflection of electromagnetic waves through a FBG containing metamaterial layers. This approach shows that the band gap becomes broader in comparison with a conventional FBG. It is observed that the central frequency of the band gap has a shift in regard of changing metamaterial thickness. We verify this investigation through attaining the transmission and reflection spectra of a conventional FBG while we are setting related parameters. Furthermore, this proposed structure can be applied as a tunable filter.