Surface nano-structural modifications and characteristics in nitrogen ion implanted W as a function of temperature and N energy

The surface modifications of tungsten massive samples (0.5 mm foils) made by nitrogen ion implantation are studied by SEM, XRD, AFM, and SIMS. Nitrogen ions in the energy range of 16-30 keV with a fluence of 1 × 10¹⁸ N⁺ cm⁻² were implanted in tungsten samples for 1600 s at different temperatures. XRD patterns clearly showed WN₂ (0 1 8) (rhombohedral) very close to W (2 0 0) line. Crystallite sizes (coherently diffracting domains) obtained from WN₂ (0 1 8) line, showed an increase with substrate temperature. AFM images showed the formation of grains on W samples, which grew in size with temperature. Similar morphological changes to that has been observed for thin films by increasing substrate temperature (i.e., structure zone model (SZM)), is obtained. The surface roughness variation with temperature generally showed a decrease with increasing temperature. The density of implanted nitrogen ions and the depth of nitrogen ion implantation in W studied by SIMS showed a minimum for N⁺ density as well as a minimum for penetration depth of N⁺ ions in W at certain temperatures, which are both consistent with XRD results (i.e., I_{W (2 0 0)}/I_{W (2 1 1)}) for W (bcc). Hence, showing a correlation between XRD and SIMS results.     

窄禁带稀磁半导体二维电子气的拍频振荡

通过对调制掺杂的n型Hg_0.82Cd_0.16Mn_0.02Te/Hg_0.3Cd_0.7Te第一类量子阱中磁性二维电子气磁阻拍频振荡的研究，发现温度、栅压的变化都会引起磁阻拍频节点位置的变化.从对拍频的分析中，可以将依赖于栅压的Rashba自旋-轨道分裂和依赖于温度的巨大塞曼分裂区分开来. 关键词： 磁性二维电子气 自旋分裂 sp-d交换相互作用 拍频     

Fluorination of perovskite-related SrFeO3−δ

We report here on the fluorination of the perovskite-related phase SrFeO_3−δ through a low temperature (400 °C) reaction with poly(vinylidene fluoride). X-ray powder diffraction shows that fluorination leads to an expansion in the unit cell which is consistent with partial replacement of oxygen by fluorine and consequent reduction in the oxidation state of iron giving SrFeO₂F. This reduction in oxidation state is confirmed by X-ray absorption- and Mössbauer-spectroscopy. The latter show complex magnetically split hyperfine patterns for the fluorinated sample, reflecting the interactions between Fe³⁺ ions which are not possible in oxides containing Fe⁴⁺.     

Characteristics of surface nano-structural modifications in nitrogen ion implanted W as a function of temperature

The surface modifications of tungsten massive samples (0.5 mm foils) made by nitrogen ion (30 keV; 1 × 10¹⁸ N⁺ cm⁻²) implantation are studied by XRD, AFM, and SIMS. XRD patterns clearly showed WN₂ (0 1 8) (rhombohedral) very close to W (2 0 0) line. Crystallite sizes obtained from WN₂ (0 1 8) line, showed an increase with substrate temperature. AFM images showed the formation of grains on W samples, which grew in size with temperature. These morphological changes are similar to those observed for thin films by increasing substrate temperature (i.e. structure zone model (SZM)). Surface roughness variation with temperature, showed a decrease with increasing temperature. The density of implanted nitrogen ions, and the depth of nitrogen ion implantation in W are studied by SIMS. The results show a minimum for N⁺ density at a certain temperature consistent with XRD results (i.e. I_W (2 0 0)/I_W (2 1 1)). This minimum in XRD results is again similar to that obtained for different thin films by Savaloni et al. [Physica B, 349 (2004) 44; Vacuum, 77 (2005) 245] and Shi and Player [Vacuum, 49 (1998) 257].     

Magnetic properties and charge ordering in Pr0.75Na0.25MnO3 manganite

The structural and magnetic properties of Pr_0.75Na_0.25MnO₃ have been investigated experimentally. At room temperature, the compound shows paramagnetic characteristic. Along with decreasing temperature, a peak appears in the magnetization versus temperature curve around 220 K. To clarify whether this peak is associated with the ordering arrangement of Mn³⁺ and Mn⁴⁺ ions, electron diffraction experiments were carried out below and above 220 K respectively. Only basic Brag diffraction spots can be observed at high temperatures, however, superlattice diffraction appears below 220 K. This provides direct evidence for the existence of charge ordering in Pr_0.75Na_0.25MnO₃. We find the Mn³⁺ and Mn⁴⁺ cations form zigzag chains in a-c plane by analyzing the diffraction patterns. Combining with the magnetization measurements and the results of electron spin resonance, we confirm the antiferromagnetic phase and ferromagnetic component coexist in Pr_0.75Na_0.25MnO₃ below 120 K.     

Improvement in electrical and magnetic properties of mixed Mg-Al-Mn ferrite system synthesized by citrate precursor technique

In the present work, mixed magnesium-manganese ferrites of composition Mg_0.9Mn_0.1Al_0.3Co_zFe_1.7−zO₄ where z=0.3, 0.5 and 0.7 have been synthesized by the citrate precursor technique. X-ray diffraction patterns of the samples confirmed the formation of single-phase spinel structure. The ferrites have been investigated for their electric and magnetic properties such as dc resistivity, Curie temperature, saturation magnetization, initial permeability and relative loss factor (RLF). Fairly constant value of initial permeability over a wide frequency range (0.1-20 MHz) and low values of the relative loss factor of the order of 10⁻⁴-10⁻⁵, in the frequency range 0.1-30 MHz, are the cardinal achievements of the present investigation. In addition to this, initial permeability was found to increase with an increase in temperature while RLF was observed to be low at these temperatures. The dc resistivity and Curie temperature were found to increase with an increase in cobalt content. The mechanisms contributing to these results are discussed in detail in this paper.     

Exchange‐coupled L10‐FePt/Fe composite patterns with perpendicular magnetization

L1₀‐FePt and exchange‐coupled L1₀‐FePt/Fe composite films are grown epitaxially on MgO(001) single crystal substrates and are subsequently large‐area patterned utilizing an electron beam lithography process with Ar⁺ ion etching. The patterning process of the continuous film system leads to a different demagnetization behavior resulting in an increase of the out‐of‐plane coercivity of the patterned samples. Due to exchange‐coupling between L1₀‐FePt and Fe the coercivity of the L1₀‐FePt/Fe composite patterns is reduced by 52% as compared to the coercivity of L1₀‐FePt patterns. From the analysis of the temperature dependence of the coercivity it follows that the dots include regions with reduced anisotropy. (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Influence of annealing temperature on structural, optical and magnetic properties of Mn-doped ZnO thin films prepared by sol-gel method

Thin films of Zn_1−xMn_xO (x=0.01) diluted magnetic semiconductor were prepared on Si (1 0 0) substrates by the sol-gel method. The influence of annealing temperature on the structural, optical and magnetic properties was studied by X-ray diffraction (XRD), atom force microscopy (AFM), photoluminescence (PL) and SQUID magnetometer (MPMS, Quantum Design). The XRD spectrum shows that all the films are single crystalline with (0 0 2) preferential orientation along c-axis, indicating there are not any secondary phases. The atomic force microscopy images show the surfaces morphologies change greatly with an increase in annealing temperature. PL spectra reveal that the films marginally shift the near band-edge (NBE) position due to stress. The magnetic measurements of the films using SQUID clearly indicate the room temperature ferromagnetic behavior, and the Curie temperature of the samples is above room temperature. X-ray photoelectron spectroscopy (XPS) patterns suggest that Mn²⁺ ions were successfully incorporated into the lattice position of Zn²⁺ ions in ZnO host. It is also found that the post-annealing treatment can affect the ferromagnetic behavior of the films effectively.     

Charge carriers and mobility of Cu-Ti ferrite

The concentration and drift mobility of charge carriers in Cu_1–x Ti _x Fe₂O₄ ferrite are calculated, over a wide range of temperatures (300–773 K), employing d.c. conductivity and thermoelectric power data. With increasing temperature the concentration of charge carriers decreases whilst the drift mobility exhibits an exponential increase. Over the above-mentioned temperature range, the obtained density of charge carriers varies between 10²¹ and 10²² cm^–3 whereas the drift mobility has values between 10^–8 and 10^–4 cm²/V s. The results are discussed on the basis of a small-polaron hopping conduction. The activation of the d.c. conductivity has been attributed to the thermal activation of the mobility.     

Effects of O2–CO2 polarization beating on femtosecond coherent anti-Stokes Raman scattering (fs-CARS) spectroscopy of O2

Femtosecond coherent anti-Stokes Raman scattering (fs-CARS) spectroscopy has recently emerged as a promising laser-based temperature-measurement technique in flames. In fs-CARS, the broad spectral bandwidths of the pump and Stokes lasers permit the coupling of each ro-vibrational Raman transition via a large number of pump-Stokes photon pairs, creating a strong Raman coherence. However, the broad-bandwidth fs pulses also excite other molecular transitions that are in resonance. The polarization beating between these closely spaced Raman transitions can affect the coherence dephasing rate of the target molecule, making it difficult to extract accurate medium temperature. In a previous study our group investigated N₂/CO polarization beating in N₂ fs-CARS; in the present work we study O₂/CO₂ polarization beating in O₂ fs-CARS. O₂ fs-CARS can be particularly important for thermometry in non-air-breathing combustion in the absence of N₂. The effects of O₂/CO₂ polarization beating are investigated in the temperature range 300–900 K at atmospheric pressure and also at 300 K for pressures up to 10 bar. Unlike in the N₂/CO system, it was observed in the O₂/CO₂ system that the presence of CO₂ can significantly alter the time evolution of the Raman coherence and, hence, affect the measured temperature.     

Superconductivity and calorimetric studies of Pr1.85Ce0.15CuO4+δ under different annealing conditions

Polycrystalline samples of electron-doped Pr_1.85Ce_0.15CuO_4+δ have been prepared under different annealing conditions and investigated by means of X-ray-diffraction, oxygen content analysis, electrical resistivity, magnetic susceptibility and low temperature specific heat measurements. X-ray-diffraction patterns show that samples contain a single T′ phase. The superconducting transition temperatures T_cm taken with the onset of diamagnetism in magnetic-susceptibility measurements are 20 and 19.5 K for sample annealed in flowing Ar gas and in vacuum (∼10⁻³ torr), respectively. The data of the samples, which are annealed in flowing Ar gas, show clear evidence for an αT² term at zero magnetic field in superconducting electronic specific heat, and are consistent with d-wave superconductivity. However, this behavior is not observed in the other sample, which is annealed in vacuum. These results indicate that different heat treatments affect the oxygen content, homogeneity, superconducting transition temperature T_c, superconducting volume fraction, and the superconducting pairing symmetry of Pr_1.85Ce_0.15CuO_4+δ.     

Effect of annealing on structure and magnetic properties of Fe-N and Fe-Ti-N thin films

The structure and magnetic properties of Fe-N and Fe-Ti-N films have been studied as a function of annealing temperature T_a with a transmission electron microscope and a vibrating sample magnetometer. The as-prepared Fe-N films consist of the γ^′-Fe₄N and α^′′-Fe₁₆N₂ phases, and the Fe-Ti-N films are composed of the γ^′-Fe₄N, α^′′-Fe₁₆N₂, and TiN phases. The structural changes with annealing temperature in the Fe-N films are distinct. The α^′′-Fe₁₆N₂ decomposes into α+γ^′ phases in the Fe-N film annealed at about 300 °C, and it disappears in the film annealed at 350 °C. Annealing of the Fe-Ti-N films shows no structural changes between room temperature (RT) and 500 °C. The saturation magnetization 4πM_S and coercivity H_c of the Fe-N films change drastically with the annealing temperature T_a, whereas those of the Fe-Ti-N films do not change with T_a up to 500 °C. These results indicate that the additon of Ti may improve the thermal stability of Fe-N films. Recieved: 6 Juli 1998 / Accepted: 19 Oktober 1998 / Published online: 10 March 1999     

Temperature-dependent fluorescence characteristics of an ytterbium-sensitized erbium-doped tellurite glass

In this article, the 1.5 μm emission spectra corresponding to the ⁴I_13/2→⁴I_15/2 transition of Er³⁺ in tellurite glass are studied within the temperature from 8 to 300 K. The emission spectra of Er³⁺: ⁴I_13/2→⁴I_15/2 transition are also analyzed using a peak-fit routine, and an equivalent four-level system is proposed to estimate the stark splitting for the ⁴I_15/2 and ⁴I_13/2 levels of Er³⁺ in the tellurite glass. The results indicate that the ⁴I_13/2→⁴I_15/2 emission of Er³⁺ can exhibit a considerable broadening due to a significant enhance the peak a′, and b′ change, respectively, and the peaks of which are located at about 1507 and 1556 nm. A detailed study of temperature-dependent 1.5 μm emission spectra involving the change of the corresponding sub-bands shows that as the temperature decreases from 300 to 8 K, its line-shape becomes sharper and more intense (the full-width at half-maximum decreases from 59 to 38 nm). Temperature-dependent fluorescence intensities and the experimentally determined lifetimes are investigated; the results show that a decrease behavior of fluorescence intensities and lifetimes are observed for temperature from 8 to 300 K.     

Fluorophosphate glasses containing manganese

New fluorophosphate glasses based on MnF₂, NaPO₃ and MF_n (M=Zn²⁺, Sr²⁺, Mg²⁺, Ba²⁺, Li⁺, Na⁺ and K⁺) have been synthesised and characterized. Large vitreous areas were observed. Samples of 4 mm in thickness have been obtained. These glasses are easy to prepare and stable in ambient air. Depending on the composition and the nature of the M cation, glass transition temperature, T_g, lies between 230 and 314 °C, crystallisation temperature, T_x is between 320 and 475 °C. These glasses are pink coloured, and infrared transmission extends up to 4.5 μm with extrinsic OH⁻ absorption band at 3200 cm⁻¹ and other bands around 2200 and 1600 cm⁻¹ that relate to PO₄ tetrahedron vibration. Other physical properties including density, microhardness, Young modulus, thermal expansion and refractive index were investigated and correlated to composition.     

Spin-glass-like behaviour and magnetic order in Mn[Cr0.5Ga1.5]S4 spinels

Magnetization and susceptibility were investigated as a function of temperature and magnetic field in polycrystalline Mn[Cr_0.5Ga_1.5]S₄ spinel. The dc susceptibility measurements at 919 Oe showed a disordered ferrimagnetic behaviour with a Curie-Weiss temperature θ_CW=−55 K and an effective magnetic moment of 5.96 μ_B close to the spin-only value of 6.52 μ_B for Cr³⁺ and Mn²⁺ ions in the 3d³ and 3d⁵ configurations, respectively. The magnetization measured at 100 Oe revealed the multiple magnetic transitions with a sharp maximum at the Néel temperature T_N=3.9 K, a minimum at the Yafet-Kittel temperature T_YK=5 K, a broad maximum at the freezing temperature T_f=7.9 K, and an inflection point at the Curie temperature T_C=48 K indicating a transition to paramagnetic phase. A large splitting between the zero-field-cooled (ZFC) and field-cooled (FC) magnetizations at a temperature smaller than T_C suggests the presence of spin-glass-like behaviour. This behaviour is considered in a framework of competing interactions between the antiferromagnetic ordering of the A(Mn) sublattice and the ferromagnetic ordering of the B(Cr) sublattice.     

Jahn-Teller transition in Al doped LiMn2O4 spinel

Al-doped lithium manganese spinels, with starting composition Li_1.02Al_xMn_1.98−xO₄ (0.00<x≤0.06), are investigated to determine the influence of the Al³⁺ doping on the Jahn-Teller (J-T) cooperative transition temperature T_J-T. X-ray powder diffraction (XRPD), nuclear magnetic resonance, electron paramagnetic resonance, conductivity and magnetic susceptibility data are put into relation with the tetrahedral and octahedral occupancy fraction of the spinel sites and with the homogeneous distribution of the Al³⁺ ions in the spinel phase. It is observed that Al³⁺ may distribute between the two cationic sublattices. The J-T distortion, associated with a drop of conductivity near room temperature in the undoped sample, is shifted towards lower temperature by very low substitution. However, for x>0.04 T_J-T it increases with increasing x, as clearly evidenced in low temperature XRPD observations. A charge distribution model in the cationic sublattice, for Al substitution, is proposed to explain this peculiar behavior.     

Non-interferometric transient quantitative phase microscopy for ultrafast engineering

Lead-free piezoelectric ceramics Bi_0.5(Na_1-x-yK_xAg_y)_0.5TiO₃ [BNKAT(x/y)] have been synthesized by the mixed oxide method. The effects of the amount of K⁺ and Ag⁺ on the electrical properties were examined. X-ray diffraction patterns indicate that K⁺ and Ag⁺ ions partially substitute for the Na⁺ ions in Bi_0.5Na_0.5TiO₃ and form a solid solution during sintering. At room temperature, the ceramics exhibit good performances with piezoelectric constant d₃₃=189 pC/N, electromechanical coupling factor k_p=35.0%, remanent polarization P_r=39.5 μC/cm², and coercive field E_c=3.3 kV/mm, respectively. The curves of the dielectric constant ε_r and loss tangent tan δ versus temperature show that the transition temperature from ferroelectric to anti-ferroelectric phase decreases with increasing the K⁺ content for the compositions researched. The dependencies of k_p and polarization versus electric (P–E) hysteresis loops on temperature reveal that the depolarization temperature T_d of BNKAT(0.15/0.015) ceramics, which have good piezoelectric properties (d₃₃=134 pC/N, k_p=32.5%) and strong ferroelectricity (P_r=39.5 μC/cm², E_c=4.1 kV/mm) at room temperature, is above 160 °C. PACS 77.22.-d; 77.65.Bn; 77.80.Bh; 77.80.Dj; 77.84.Dy     

The dependence of the structural and optical properties on the Te mole fraction in ZnS1−xTex/GaAs heterostructures

Lattice-mismatched ZnS_1−xTe_x epilayers with various Te mole fractions on GaAs (100) substrates were grown by double well temperature gradient vapor deposition. X-ray diffraction patterns showed that the grown ZnS_1−xTe_x layers were epitaxial films. The photoluminescence spectra showed that the peak position of the acceptor-bound exciton (A⁰, X) varied dramatically with changing the Te mole fraction and that the behavior of the (A⁰, X) peak position of the ZnS_1−xTe_x epilayers with a small amount of the Te mole fraction was attributed to a bowing effect. The reflectivity and ellipsometry spectra showed that the absorption energy peak was significantly affected due to the Stoke's effect. These results provide important information on the structural and optical properties of ZnS_1−xTe_x/GaAs heterostructures for improving optoelectronic device efficiencies operating in the spectral range between near ultraviolet and visible regions.     

Variable temperature EPR spectra of Copper (II) ions in kainite crystals

X-band electron paramagnetic resonance (EPR) studies on divalent copper ions embedded in KMgClSO₄·3H₂O single crystals have been performed at low temperature (123 K). The angular variation of the EPR spectra reveals the presence of two Cu²⁺ sites, which have different orientations. The spin-Hamiltonian parameters of this six-coordinated cupric ion have been evaluated from the EPR spectra at 123 K. The forbidden lines due to Δm_I=±1 transitions are observed in between allowed transitions. The temperature variation EPR studies have also been performed both for a single crystal and a polycrystalline sample. The ground state wavefunction of Cu²⁺ ions has been estimated and is found to be an admixture of d_3z²−r² and d_x²−y². The temperature variation of the EPR spectra reveals that Cu²⁺ ions exhibit dynamic Jahn-Teller effect. From the polycrystalline EPR data, the temperature dependent magnetic susceptibilities are evaluated and discussed.     

Fabrication of nanostructured CuInS2 thin films by ion layer gas reaction method

CuInS₂ thin films were prepared by a two-stage ion layer gas reaction (ILGAR) process in which the Cu and In precursors were deposited on glass substrate by using a simple and low-cost dip coating technique and annealed in H₂S atmosphere at different temperatures. The influence of the annealing temperature (250-450 °C) on the particle size, crystal structure and optical properties of the CuInS₂ thin films was studied. Transmission electron microscopy revealed that the particle radii varied in the range 6-21 nm with annealing. XRD and SAED patterns indicated polycrystalline nature of the nanoparticles. The optical band gap (E_g) varied from 1.48 to 1.56 eV with variation of particle size. The variation of Urbach tail with temperature indicated higher density of the defects for the films annealed at lower temperature. From the Raman study, it was observed that the FWHM of the A₁ mode at ∼292 cm⁻¹ corresponding to the chalcopyrite phase of CuInS₂ decreased with increasing annealing temperature.