用Stokes参量法实现数字同轴偏振全息的研究

提出了一种基于Stokes参量的数字同轴偏振全息方法.在实验中用一束线偏振光和一束椭圆偏振光作为参考光, 分别与物光进行干涉,通过拍摄在两个相互垂直方向上的全息图,计算出物光在这两个方向的振幅和相位信息, 从而得到物光的Stokes参量和物体的全偏振信息,实现对各向异性物体偏振态空间分布的图像重建. 实验结果表明,该方法可用于物体的全偏振特性的测量.这种方法在求出物光Stokes参量的同时, 也可消除零级像和共轭像的干扰,因此也可用于同轴或离轴全息.     

Holographic particle sizing using Wigner–Ville distribution

A novel method for measuring size of small objects with high-aspect ratio from in-line holograms by using Wigner–Ville distribution (WVD) is proposed. The proposed method provides direct calculation of the particle size by using local spatial-frequency information at the half length of holograms being analyzed. Feasibility of this method is experimentally verified by analyzing in-line holograms of an optical fiber.     

利用反射全息实现计算全息三维显示

计算全息和光学全息都可应用于三维显示,但各有自己的优势和缺陷.将计算全息和光学反射全息相结合,可以突破光学全息对记录物体的限制,进行虚拟物体或自然场景的全息图的制作,同时可以实现白光再现.本文首先用三维扫描仪获得实际物体的三维数据,用"点云算法"模拟得到其菲涅耳全息图透射率数据,采用计算全息打印机将其输出于全息记录介质,得到可光学再现的菲涅耳计算全息图H1.然后将H1作为光学全息的记录物体进行反射全息记录,将平面全息转化为体全息,实现了计算全息白光再现.     

利用反射全息实现计算全息三维显示

计算全息和光学全息都可应用于三维显示,但各有自己的优势和缺陷.将计算全息和光学反射全息相结合,可以突破光学全息对记录物体的限制,进行虚拟物体或自然场景的全息图的制作,同时可以实现白光再现.本文首先用三维扫描仪获得实际物体的三维数据,用"点云算法"模拟得到其菲涅耳全息图透射率数据,采用计算全息打印机将其输出于全息记录介质,得到可光学再现的菲涅耳计算全息图H₁.然后将H₁作为光学全息的记录物体进行反射全息记录,将平面全息转化为体全息,实现了计算全息白光再现.     

Parallel-quadrature phase-shifting digital holographic microscopy using polarization beam splitter

We present a digital holography microscopy technique based on a parallel-quadrature phase-shifting method. Two π/2 phase-shifted holograms are recorded simultaneously using polarization phase-shifting principle, slightly off-axis recording geometry, and two identical CCD sensors. The parallel phase-shifting is realized by combining circularly polarized object beam with a 45° degree polarized reference beam through a polarizing beam splitter. DC term is eliminated by subtracting the two holograms from each other and the object information is reconstructed after selecting the frequency spectrum of the real image. Both amplitude and phase object reconstruction results are presented. Simultaneous recording eliminates phase errors caused by mechanical vibrations and air turbulences. The slightly off-axis recording geometry with phase-shifting allows a much larger dimension of the spatial filter for reconstruction of the object information. This leads to better reconstruction capability than traditional off-axis holography.     

Holographic simultaneous readout polarization multiplexing based on photoinduced anisotropy in bacteriorhodopsin

Bacteriorhodopsin (bR) is a reversible photochromic protein that can be used as a holographic medium. The dichroic absorption of the bR molecule is polarization dependent, thereby allowing for the recording of polarization holograms. The properties of polarization holograms can be used to multiplex two independent images in a single bR film. A new technique and associated polarization-multiplexing scheme are demonstrated that allow for simultaneous readout of two orthogonally polarized images while achieving a high normalized diffraction efficiency for each of the individual images.     

光致各向异性记录介质偏振全息图的透射矩阵

在给定参、物光波的偏振态和位相差的关系以后,用光致各向异性介质记录偏振全息图的光学常数分布便被确定。这样,可以把偏振全息图看作是一种复杂的偏振元件,按照偏振元件的矩阵理论,可以求出偏振全息图的透射矩阵。透射矩阵与照明光的琼斯矢量相乘,便可以求出再现光波的琼斯矢量。 关键词：     

Three-dimensional object recognition from digital Fresnel hologram by wavelet matched filtering

We propose and demonstrate a digital holographic technique for 3D object recognition and classification. One Fresnel digital hologram of each of the 3D objects to be classified is recorded. The electronic holograms are processed digitally to retrieve 3D object information as 2D digital complex images. We use this method to classify four physical objects in a 3D scene into two classes. Results are presented from an experiment to demonstrate the proof of the concept.     

Computer generated holograms using personal computers

Holography or the method of wave-front reconstruction to produce an image was introduced by D. Gabor in 1948. Normally a laser is necessary to produce holograms in the laboratory. This paper introduces the usage of the high resolution display of the IBM-PC and a graphics printer to generate holograms. The advantages of using this method are that holograms of real or fictitious objects can be made, since all objects can be represented by a collection of points and one does not need an elaborate set up to make the holograms. This method is also useful for making Fourier transform holograms, image plane holograms, spatial filters, optical elements, etc.^1,2     

Analysis of Polarization State by Digital Holography with Polarization Modulation

The digital holographic technique is applied to analyze the spatial distribution of polarization state of light transmitted through anisotropic objects using an orthogonal linearly polarized reference beam. The polarization orientation of reference beam is switched by an optical fiber Faraday rotator for successive hologram recording. To confirm the principle of polarization analysis, a quarter wave plate (QWP) is used and the distribution of polarization state over the object surface is analyzed for various orientations of the QWP. By providing an area of a known polarization for a part of the object wave as a reference, a phase drift of the reference waves can be evaluated and compensated for using the reference area. The principal axis and ellipticity of polarization ellipse are calculated and compared with their theoretical values. A good agreement between the experimental and theoretical values is observed.     

基于相位共轭的动态体全息衍射特性的实时非破坏性测量

基于相位共轭技术,提出了一种动态体全息衍射特性的实时测量方法.在光学系统设计中,通过调整使得物光和参考光较强,而与参考光共轭的再现光非常弱（约为参考光的1/1 000）,借助非常微弱的共轭再现光实现了动态体全息的非破坏性实时测量.三束光的强度和偏振态可通过1/4波片、偏振片和衰减片进行调节和组合,可记录光强调制型或偏振态调制型体全息.本方法适合于光致折射率变化和光致变色材料体全息的测量.     

Imaging of rotating objects by means of synthesized optical holograms

A scheme is presented for producing optical holograms of rotating objects by illuminating the object by a single-frequency coherent laser beam. Along one axis, the synthesis takes place due to rotation of the object; along the other axis, the hologram is synthesized by the coherent radiation field generated by a long linear optical antenna. Numerical simulation shows that reliable discrimination of object images from the accompanying background is possible, for point objects, using a single hologram recorded at one angular position and, for extended flat objects or thin cylinder-like objects, using holograms recorded at two or three angular positions. If the holograms are synthesized in the presence of normally distributed random phase noise, the quality of the reconstructed images of rotating objects remains sufficiently high for root-mean-square noise amplitudes exceeding π/2 and reaching the limiting value 2π/3.     

偏光全息研究历程与展望

全息是目前一项极具前景的科学技术,即通过信号光和参考光的干涉,在小小的全息图上记录丰富的信息。相比于传统全息仅记录光波的相位、振幅信息,偏光全息可以将额外的偏振信息记录于偏振态敏感材料中。本文从偏光全息材料入手,详细介绍了偏光全息生产过程;同时介绍基于琼斯理论和张量理论的偏光全息原理和研究进展;最后描述了偏光全息在全息存储和纳米光学领域的发展前景。     

显示反射全息图单光束相干复制技术

描述用单光束激光复活制银盐白光显示反射全息图的技术，本技术的关键：１）母全息图的颜色必须恢复到满足其布拉格条件；２）复制所用的光波与记录母全息图时的参考的相同；（３）复制所用的激光采用平行偏振，以减少界面反射；９４）采用白糖溶液作为折射率匹配液，取得极佳效果。     

Multiframe full-field heterodyne digital holographic microscopy

Digital holographic microscopy using multiframe full-field heterodyne technology is discussed in which two acousto-optic modulators are applied to generate low-frequency heterodyne interference and a high-speed camera is applied to acquire multiframe full-field holograms. We use a temporal frequency spectrum analysis algorithm to extract the object's information. The twin-image problem can be solved and the random noise can be significantly suppressed. The relationship between the frame number and the reconstruction accuracy is discussed. The typical objects of microlenses and biology cells are reconstructed well with 100-frame holograms for illustration.     

水下物体激光圆偏振成象实验及与线偏振成象的比较

采用波长532nm激光作光源,面阵CCD作探测器,利用圆偏振技术进行水下物体成象实验研究,对实验结果进行了分析并与线偏振成象技术进行了比较。结果表明无论是采用圆偏振技术还是线偏振技术都可提高水下物体成象的衬比（度）和成象距离;水体较清时圆偏振成象清晰度远远大于线偏振成象清晰度;当水体较混时,圆偏振成象清晰度大大下降和线偏振成象效果相接近。     

Effects of recording wavelength on three-dimensional vector holograms in photoreactive liquid crystal composites

Effects of recording wavelength on the recently proposed (Sasaki, 2008) three-dimensional vector holograms, in which the optical anisotropy is three-dimensionally modulated, are presented experimentally and theoretically. The polarization states of the interference light are three-dimensionally modulated due to both the polarization interference and optical anisotropy in the recording medium. These spatial distributions of the polarization states and the resulting diffraction properties in the three-dimensional vector holograms are strongly dependent on the recording wavelength. Theoretical consideration based on the finite-difference time-domain (FDTD) method reveals the mechanism of the optical characteristics of the three-dimensional vector holograms recorded by various kinds of light sources with different wavelengths.     

Pattern Detection in Gray-Scale Images with Polarization Coding

Most of the matched filtering techniques that have been used for pattern recognition have manipulated amplitude and phase information. Light, however, has another principal type of information that has not yet been used for pattern recognition. We propose a matched filtering technique which manipulates the polarization of light and shows the merits of using polarization information. The amplitude transmittance of input images is coded into the two-dimensional orientation distribution of linearly polarized light. A polarization spatial filter, which can change the light polarization two-dimensionally, is designed by considering the polarization distribution of the Fourier transform of an image to be detected which is polarization-coded. The proposed technique shows a better capacity to discriminate gray-scale images than do the conventional matched filtering techniques.     

Pulsed digital holographic interferometry by using a flexible fiber endoscope

A system based on digital holographic interferometry in combination with a flexible fiber endoscope is described. A Q-switched pulsed laser is used. Two digital holograms of the test object, corresponding to the two laser pulses, are captured at separate video frames of a CCD-camera, transferred in a frame grabber and further processed in a PC. If the object undergoes a deformation during the interval between the two laser pulses (usually in the range of 5–600 μs), a fringe pattern will result from the difference between the two holograms. This fringe pattern has the information needed to evaluate quantitatively the amount of the deformation. A compact system has been developed to be used for various applications, both mechanical and biological, where measurements need to be performed at “hidden” surfaces or inside more or less closed objects. The quality of the results obtained by using mechanical objects is usually better than for biological objects. This can be explained easily by the fact that a biological surface is much more complex, in particular some parts of the surface may reflect the light well whereas some other parts may absorb it. Experimental results are presented.     

Incoherent recovering of the spatial resolution in digital holography

We report on a technique to recover the spatial resolution of digitally recorded and reconstructed holograms of large objects. Due to the high-contrast speckle noise diminishes the spatial resolution in coherent imaging systems our proposal is based on the reduction of the contrast of it. This aim is achieved through the superposition on an intensity basis of digitally reconstructed holograms of the same static scene. We show a theoretical justification of the procedure and experimentally-obtained results of applying the technique with digitally reconstructed holograms of an object with very poor optical contrast.