Sonochemical synthesis and characterization of new nanostructures cobalt(II) metal-organic complexes derived from the azo-coupling reaction of 4-amino benzoic acid with anthranilic acid,salicylaldehyde and 2-naphtol

Nanostructures of three new cobalt(II) complexes, (CoL₁)·0.5DMF·1.5MeOH (1), [H₂L₁ = 5-(4-Carboxy phenyl azo) anthranilic acid], (Co(L₂)₂)·1.5MeOH (2), [HL₂ = 5-(4-Carboxy phenyl azo) salicylaldehyde] and (Co(L₃)₂)·0.5 DMF·0.5MeOH (3), [HL₃ = 1-(4-Carboxy phenyl azo) 2-naphtol], have been synthesized by the reaction of H₂L₁, HL₂ and HL₃ with Co(OAc)₂·4H₂O through sonochemical process. Calcination of the nano-sized compounds 1–3 yield Co₃O₄ nanoparticles at 450 °C under air atmosphere. These nanostructures were characterized by X-ray powder diffraction (XRD) and Scanning Electron Microscopy (SEM). Thermal stability of compounds 1–3 was studied by thermogravimetric (TG) and differential thermal analyses (DTA).     

UV–Vis and NMR spectroscopic investigations on effective and selective non-covalent interactions between fullerenes and calix[6]arene

Ground state non-covalent interactions between a macro cyclic calixarene receptor, namely, 4-tert-butylcalix[6]arene (1), and fullerenes (C₆₀ and C₇₀) were studied in toluene medium by absorption spectrophotometric method. Absorption band due to the charge transfer (CT) transition have been observed in the visible region between fullerenes and 1. Utilizing the CT absorption bands, various important physicochemical parameters like oscillator strength, resonance energy, transition dipole strength of the fullerene-1 complexes and ionization potential of 1 is determined in present investigations. From Jobs method of continuous variation, it is observed that both C₆₀ and C₇₀ form stable 1:1 complexes with 1. The most fascinating feature of the present study is that 1 binds selectively C₇₀ compared to C₆₀ as obtained from binding constant (K) data of C₆₀–1 (K_C60–1) and C₇₀–1 (K_C70–1) complexes, i.e., K_C60–1 = 32,400 dm³·mol^? 1 and K_C70–1 = 110,000 dm³.mol^? 1 and selectivity (K_C70–1/K_C60–1) = 3.4. ¹H NMR analysis provides very good support in favor of strong binding between C₇₀ and 1.     

An organic electroluminescent device made from a gadolinium complex

A gadolinium ternary complex, tris(1-phenyl-3-methyl-4-isobutyryl-5-pyrazolone) (phenanthroline) gadolinium [Gd(PMIP)₃(Phen)] was synthesized and used as a light emitting material in the organic electroluminescent (EL) devices. The triple layer device with a structure of indium tin oxide (ITO)/N,N′-diphenyl-N,N′-bis(3-methylphenyl)-1,1′-biphenyl-4,4′-diamine (TPD) (20 nm)/Gd(PMIP)₃(Phen) (80 nm)/2, 9-dimethyl-4, 7-diphenyl-1, 10-phenanthroline (bathocuproine or BCP) (20 nm)/Mg: Ag(200 nm)/Ag(100 nm) exhibited green emission peaking at 535 nm. A maximum luminance of 230 cd/m² at 17 V and a peak power efficiency of 0.02 lm/w at 9 V were obtained.     

Red organic light-emitting diodes with high efficiency,low driving voltage and saturated red color realized via two step energy transfer based on ADN and Alq3 co-host system

We demonstrated efficient red organic light-emitting diodes based on a wide band gap material 9,10-bis(2-naphthyl)anthracene (ADN) doped with 4-(dicyano-methylene)-2-t-butyle-6-(1,1,7,7-tetramethyl-julolidyl-9-enyl)-4H-pyran (DCJTB) as a red dopant and 2,3,6,7-tetrahydro-1,1,7,7,-tetramethyl-1H,5H,11H-10(2-benzothiazolyl)quinolizine-[9,9a,1gh]coumarin (C545T) as an assistant dopant. The typical device structure was glass substrate/ITO/4,4′,4″-tris(N-3-methylphenyl-N-phenyl-amino)triphenylamine (m-MTDATA)/N,N′-bis(naphthalene-1-yl)-N,N′-diphenyl-benzidine (NPB)/[ADN:Alq₃]:DCJTB:C545T/Alq₃/LiF/Al. It was found that C545T dopant did not by itself emit but did assist the energy transfer from the host (ADN) to the red emitting dopant via cascade energy transfer mechanism. The OLEDs realized by this approach significantly improved the EL efficiency. We achieved a significant improvement regarding saturated red color when a polar co-host emitter (Alq₃) was incorporated in the matrix of [ADN:Alq₃]. Since ADN possesses a considerable high electron mobility of 3.1 × 10⁻⁴ cm²  V⁻¹ s⁻¹, co-host devices with high concentration of ADN (>70%) exhibited low driving voltage and high current efficiency as compared to the devices without ADN. We obtained a device with a current efficiency of 3.6 cd/A, Commission International d’Eclairage coordinates of [0.618, 0.373] and peak λ_max = 620 nm at a current density of 20 mA/cm². This is a promising way of utilizing wide band gap material as the host to make red OLEDs, which will be useful in improving the electroluminescent performance of devices and simplifying the process of fabricating full color OLEDs.     

A general method for preparing lanthanide oxide nanoparticles via thermal decomposition of lanthanide(III) complexes with 1-hydroxy-2-naphthoic acid and hydrazine ligands

Six new lanthanide(III) complexes (i.e., [Ln(L)₂(NA)_1.5]·3H₂O, where Ln=La(III), Pr(III), Nd(III), Sm(III), Gd(III), and Ce(III) and L and NA indicate N₂H₄ and C₁₀H₆(1-O)(2-COO), respectively) with 1-hydroxy-2-naphthoic acid [C₁₀H₆(1-O)(2-COOH)] and hydrazine (N₂H₄) as co-ligands were characterized by elemental, FTIR, UV-visible, and XRD techniques. In the FT-IR spectra, the N-N stretching frequency in the range of 981–949 cm⁻¹ demonstrates evidence of the presence of coordinated N₂H₄, indicating the bidentate bridging nature of hydrazine in the complexes. These complexes show symmetric and asymmetric COO⁻ stretching from 1444 to 1441 cm⁻¹ and 1582 to 1557 cm⁻¹, respectively, indicating bidentate coordination. TG-DTA studies revealed that the compounds underwent endothermic dehydration from 98 to 110 °C. This was followed by the exothermic decomposition of oxalate intermediates to yield the respective metal oxides as the end products. From SEM images, the average size of the metal oxide particles prepared by thermal decomposition of the complexes was determined to be 39–42 nm. The powder X-ray and SEM coupled with energy dispersive X-ray (EDX) studies revealed the presence of the respective nano-sized metal oxides. The kinetic parameters of the decomposition of the complexes were calculated using the Coats-Redfern equation.     

Tuneability of Sm(1 − x)CexFeO3 ± λ perovskites: Thermal stability and electrical conductivity

Trimetallic perovskite oxides, Sm_(1 ? x)Ce_xFeO_3 ± λ (x = 0–0.05), were prepared by thermal decomposition of amorphous citrate precursors followed by calcinations. The material properties of the substituted perovskites were characterized by X-ray diffraction (XRD), X-ray florescence spectroscopy (XRF), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The doped materials exhibited a single perovskite phase in air up to 1350 °C and have specific surface areas in the range of 2.696–8.665 m²/g. In reducing atmosphere (5%v/vH₂/N₂), the unsubstituted perovskite (x = 0) decomposed into two phases while the ceria stabilized materials (x = 0.01, x = 0.03, x = 0.05) remained in a single phase as revealed by XRD analysis. Their conductivities were measured by the four point probe method in air and in dilute hydrogen (5%v/vH₂/N₂) separately. The ceria substituted materials show increased stability versus reduction and phase separation for a wide temperature range (up to 1000 °C). Although undoped SmFeO₃ has higher conductivity under oxidizing conditions than ceria doped SmFeO₃ due its p-type nature, the situation is reversed under reducing conditions. The ceria substituted perovskites (Sm_(1 ? x)Ce_xFeO_3 ± λ, x = 0–0.05) showed higher conductivity in reducing than in oxidizing conditions, suggesting that ceria doping at the A-site has changed the SmFeO₃ from p-type to n-type semi-conducting behavior.     

Determination of rifampicin based on fluorescence quenching of GSH capped CdTe/ZnS QDs

Aqueous glutathione (GSH)-capped CdTe/ZnS QDs with the diameter of 3–4 nm were synthesized. The fluorescence of CdTe/ZnS QDs at 577 nm was quenched in the presence of rifampicin (Rfp), with excitation wavelength at 350 nm. The mechanism of the interaction of CdTe/ZnS QDs with Rfp was investigated. Under the optimal conditions, the calibration plot of ln(F₀/F) was linear in the range 0.83–56 μg mL^?1 with concentration of Rfp, and the detection limit was 0.25 μg mL^?1. The proposed method was successfully applied to the determination of Rfp in its commercial capsules, and satisfactory results were obtained. The recovery of the method was in the range 98.6–103.2%.     

Sonochemical synthesis of nanoscale mixed-ligands lead(II) coordination polymers as precursors for preparation of Pb2(SO4)O and PbO nanoparticles; thermal,structural and X-ray powder diffraction studies

Nano-structures of two new Pb(II) two-dimensional coordination polymers, [Pb(μ-4-pyc)(μ-NCS)(μ-H₂O)]_n (1) and [Pb(μ-4-pyc)(μ-N₃)(μ-H₂O)]_n (2), 4-Hpyc = 4-pyridinecarboxylic acid were synthesized by a sonochemical method. The new nano-structures were characterized by scanning electron microscopy, X-ray powder diffraction, IR spectroscopy and elemental analyses. Compounds 1 and 2 were structurally characterized by single crystal X-ray diffraction and consist of two-dimensional polymeric units. The thermal stability of compounds 1 and 2 were studied by thermal gravimetric and differential thermal analyses and compared. Pb₂(SO₄)O and PbO nanoparticles were obtained by calcination of the nano-structures of compounds 1 and 2 at 600 °C, respectively.     

Synthesis of TiO2 nanoparticles and spectroscopic upconversion luminescence of Nd3+-doped TiO2–SiO2 composite glass

Nd³⁺-doped TiO₂–SiO₂ composites were prepared by sol–gel method. Optical properties such as radiative life-time (τ), stimulated emission cross-section (σ_p) and branching ratio (β) were calculated using Judd–Ofelt theory. Violet to blue upconversion emissions at 380 nm (⁴D_3/2→⁴I_11/2), 399 nm (²P_3/2→⁴I_11/2), 420 nm (²D_5/2→⁴I_9/2) and 452 nm (²P_3/2→⁴I_13/2) were obtained under 578 nm xenon-lamp excitation. The choice of 578 nm is justified by the absorption spectra of the same samples, which shows a strong absorption peak at 578 nm. This 578 nm excitation pump produces upconversion in Nd³⁺ by a sequential two-photon absorption process.     

High adsorption capacity of two Zn-based metal–organic frameworks by ultrasound assisted synthesis

Micro- and nano-rods and plates of two 3D, porous Zn(II)-based metal–organic frameworks [Zn(oba)(4-bpdh)_0.5]_n·(DMF)_1.5 (TMU-5) and [Zn(oba)(4-bpmb)_0.5]_n (DMF)_1.5 (TMU-6) were prepared by sonochemical process and characterized by scanning electron microscopy, X-ray powder diffraction and IR spectroscopy. These MOFs were synthesized using a non-linear dicarboxylate (H₂oba = 4,4-oxybisbenzoic acid) and two linear N-donor (4-bpdh = 2,5-bis(4-pyridyl)-3,4-diaza-2,4-hexadiene and 4-bpmb = N¹,N⁴-bis((pyridin-4-yl)methylene)benzene-1,4-diamine) ligands by ultrasonic irradiation. Sonication time and concentration of initial reagents influencing size and morphology of nano-structured MOFs, were also studied. Calcination of TMU-5 and TMU-6 at 550 °C under air atmosphere yields ZnO nanoparticles. TMU-5 and TMU-6 exhibited maximum percent adsorption of 96.2% and 92.8% of 100 ppm rhodamine B dye, respectively, which obeys first order reaction kinetics.     

A new carbon nitride synthesized by shock compression of organic precursors

A series of shock recovery experiments up to ∼50 GPa were carried out on three nitrogen-rich materials of a C–N–O amorphous precursor, dicyandiamide and melamine. The powder X-ray diffractions (XRD) of recovered samples show that carbon nitride phases are formed. They are β-C₃N₄ and a new crystalline phase. The new phase is indexed as a monoclinic cell with a=0.981 nm, b=0.723 nm, c=0.561 nm, β=95.2° and V_cell=0.3966 nm³. Melamine was very stable and did not decompose up to ∼37 GPa. This new phase is considered to form during the adiabatic release process with an extremely high quenching rate (∼10⁹ K/s) and shock compression may provide a novel synthesis route for various C–N phases from appropriate organic materials.     

Sonochemical synthesis of two nanostructured silver(I) coordination polymers based on semi-rigid bis(benzimidazole) ligands

Nanoparticles of two silver(I) coordination polymers (CPs), [Ag₂(L1)₂(DCTP)]_n (1) and [Ag₂(L2)(DCTP)]_n (2) (L1 = 1,3-bis(5,6-dimethylbenzimidazol-1-ylmethyl)benzene, L2 = 1,4-bis(benzimidazol-1-yl)-2-butene, H₂DCTP = 2,5-dichloroterephthalic acid), were synthesized by the sonochemical approach and hydrothermal method. Both CPs were characterized by elemental analysis, IR spectra, single-crystal X-ray diffraction, scanning electron microscopy (SEM), and thermogravimetric analyses (TGA). CP 1 exhibits a 2D 4-connected sql net with the point symbol {4⁴.6²}. While CP 2 displays a 2D 3,4-connected 3,4L13 net with the point symbol {4.6²}₂{4².6².8²}. The structural diversity indicates that semi-rigid bis(benzimidazole) co-ligands play important roles in tuning the structures of the mixed Ag(I) CPs. The ultrasound irradiation time, temperature, and power showed significant effects on the morphology and growth process of the nanoparticles of two silver(I) CPs. The luminescence and photocatalytic properties of the nanoparticles of CPs 1–2 on the degradation of methyl blue (MB) were also investigated in detail.     

Influence of growth morphology on the Néel temperature of CrRu thin films and heterostructures

Dimensionality effects on epitaxial and polycrystalline Cr_1?xRu_x alloy thin films and in Cr/Cr–Ru heterostructures are reported. X-ray analysis on Cr_0.9965Ru_0.0035 epitaxial films indicates an increase in the coherence length in growth directions (1 0 0) and (1 1 0) with increasing thickness (d), in the range 20≤d≤300 nm. Atomic force microscopy studies on these films shows pronounced vertical growth for d>50 nm, resulting in the formation of columnar structures. The Néel temperatures (T_N) of the Cr_0.9965Ru_0.0035 films show anomalous behaviour as a function of d at thickness d≈50 nm. It is interesting to note that this thickness corresponds to that for which a change in film morphology occurs. Experiments on epitaxial Cr_1?xRu_x thin films, with 0≤x≤0.013 and d=50 nm, give T_N–x curves that correspond well with that of bulk Cr_1?xRu_x alloys. Studies on Cr/Cr_0.9965Ru_0.0035 superlattices prepared on MgO(1 0 0), with the Cr layer thickness varied between 10 and 50 nm, keeping the Cr_0.9965Ru_0.0035 thickness constant at 10 nm, indicate a sharp decrease in T_N as the Cr separation layers reaches a thickness of 30 nm; ascribed to spin density wave pinning in the Cr layers for d<30 nm by the adjacent CrRu layers.     

High-resolution transmission electron microscopy study on reversion of Al2CuMg precipitates in Al–Cu–Mg alloys under irradiation

Image deconvolution analyses showed that reversion of S-Al₂CuMg precipitates occurred in an Al–Cu–Mg alloy during high-resolution transmission electron microscopy observations. A fraction of Mg and Cu atoms in the precipitates diffused into Al matrix due to electron beam irradiation at 300 kV, resulting in structural/chemical reversion of the precipitates. The structural reversion of the S-Al₂CuMg precipitates is closely related with irradiation-induced displacement of atoms. The strong attraction between Cu and Mg atoms might assist the sub-threshold displacement of Cu atoms. One transitional structure is determined to be S′′-Al₁₀Cu₃Mg₃, a precursor of S-Al₂CuMg. Two other transitional structures, Al₃CuMg and Al₁₈Cu₅Mg₅ which have the same lattice parameters of a = c = 0.405 nm as that of S′′-Al₁₀Cu₃Mg₃, but different b values, are suggested.     

Polymorphic phase transition and thermal stability in squaric acid (H2C4O4)

Phase transformations in squaric acid (H₂C₄O₄) have been investigated by thermogravimetry and differential scanning calorimetry with different heating rates β. The mass loss in TG apparently begins at onset temperatures T_di=245±5 °C (β=5 °C min^?1), 262±5 °C (β=10 °C min^?1), and 275±5 °C (β=20 °C min^?1). A polymorphic phase transition was recognized as a weak endothermic peak in DSC around 101 °C (T_c⁺). Further heating with β=10 °C min^?1 in DSC revealed deviation of the baseline around 310 °C (T_i), and a large unusual exothermic peak around 355 °C (T_p), which are interpreted as an onset and a peak temperature of thermal decomposition, respectively. The activation energy of the thermal decomposition was obtained by employing relevant models. Thermal decomposition was recognized as a carbonization process, resulting in amorphous carbon.     

Ultrasonic-assisted synthesis and structural characterization of two new nano-structured Hg(II) coordination polymers

Two new Hg(II) coordination polymers containing N,N′-Bis-pyridin-3-ylmethylene-naphtalene-1,5-diamine ligand were synthesized by conventional and sonochemical methods, characterized by spectroscopic techniques (FT-IR and elemental analysis), and their X-ray crystallographic structures were determined. The crystal packing and supramolecular features of these coordination polymers were studied using geometrical analysis and Hirshfeld surface analysis. The crystal structure analysis revealed that H⋯H contacts, C–H⋯π and C–H⋯X (X = Cl for 1 and X = Br for 2) hydrogen bonding interactions are strong enough to govern the supramolecular architecture. The BFDH analysis helps us to compare the predicted morphology to that obtained under ultrasonication. This study may provide further insight into discovering the role of weak intermolecular interactions in the context of nano-supramolecular assembly.     

Growth,structure and physical properties of single crystals of pure and Pb-doped Bi-based high Tc superconductors

Single crystals of (Bi_1−xPb_x)₂Sr₂Ca₂Cu₃O_10+δ (x = 0 and 0.16) (sizes up to 3 × 2 × 0.1 mm³) have been grown by means of a newly developed “vapour-assisted travelling solvent floating zone” technique (VA-TSFZ). Post-annealing under high pressure of O₂ (up to 10 MPa at T = 500 °C) was applied to enhance T_c (up to 111 K) and improve the homogeneity of the crystals (ΔT_c ⩽ 1 K). The structure of both Pb-free and Pb-doped Bi-2223 was refined for the first time from single crystal X-ray diffraction (XRD) data. The unit cell of the average structure is pseudo-tetragonal with a = 5.4210(7), b = 5.4133(6) and c = 37.010(7) Å, and a = 5.395(1), b = 5.413(1) and c = 37.042(11) Å, for the Pb-free and the Pb-doped phase, respectively. An incommensurate modulation in the direction of one of the short cell vectors has been defined (q ∼ 0.21 a¹), however, the structure can be conveniently described in a supercell with a fivefold volume (a = 27.105(4) Å). With respect to the “non-modulated” structure, one additional oxygen atom for ten initial O was found to be inserted into the BiO layers. The superconducting anisotropy of Bi-2223 was found to be ∼50, from measurements of the lower critical field. The anisotropy of Bi-2223 is significantly reduced compared to that of Bi-2212, and this accounts for the enhanced irreversibility fields in Bi-2223. Furthermore, Bi-2223 has a higher critical current density, and a reduced magnetic relaxation rate compared to Bi-2212, which are both signatures of more effective pinning in Bi-2223 due to its reduced anisotropy.     

Sonochemical synthesis of two new nano lead(II) coordination polymers: Evaluation of structural transformation via mechanochemical approach

Two new lead(II) mixed-ligand coordination polymers, [Pb(PNO)(SCN)]_n (1) and [Pb(PNO)(N₃)]_n (2), (HPNO = picolinic acid N-oxide) were synthesized by a sonochemical method and characterized by scanning electron microscopy, X-ray powder diffraction, IR spectroscopy and elemental analysis. Compounds 1 and 2 were structurally characterized by single crystal X-ray diffraction. The thermal behavior of 1 and 2 were studied by thermal gravimetric analysis. Structural transformations of compounds 1 and 2 were evaluated through anion-replacement processes by mechanochemical method. Moreover, the effect of sonication conditions including time, concentrations of initial reagents and power of irradiation were evaluated on size and morphology of compounds 1 and 2.     

Synthesis and characterization of fast-decaying bluish green phosphors of Tb3+-doped CaSi2O2N2 for 2D/3D plasma display panels

Oxynitride phosphor powders comprising of CaSi₂O₂N₂ doped with Tb³⁺ were successfully synthesized using a high-temperature solid-state reaction method. The experimentally determined photoluminescence (PL) properties of the produced phosphors meet the requirements of 2D/3D plasma display panels (PDPs). In particular, under the excitation of vacuum ultraviolet (VUV) synchrotron radiation and ultraviolet (UV) irradiation, emission peaks corresponding to the ⁵D₃→⁷F_J (J=6, 5, 4, 3) and ⁵D₄→⁷F_J (J=6, 5, 4, 3) transitions of Tb³⁺ ions were recorded. Monitoring the ⁵D₄→⁷F₅ emission of Tb³⁺ at 545 nm, the excitation bands were assigned to the host-related absorption as well as the 4f–5d (fd) and the 4f–4f (ff) transitions of Tb³⁺. The produced phosphors can be efficiently excited at 147 nm, and have an adequately short decay time (τ_1/10=1.14 ms).     

Ferromagnetic order and spin-glass behavior in multi-metallic compound Ni1.125Co0.375[Fe(CN)6] · 6.8H2O

Multi-metallic Prussian blue compound Ni_1.125Co_0.375[Fe(CN)₆] · 6.8H₂O has been synthesized. The Mössbauer spectroscopy at room temperature and IR spectra study revealed that the metal ions are bonded through cyanide ligand and the presence of low spin Fe^III(S = 1/2) and high spin Fe^III(S = 5/2) ions, as showed in these structure: Fe^III(S = 1/2)-CN-(Co^II/Ni^II)(96%) and Fe^III(S = 5/2)-NC-(Co^II/Ni^II) (4%). The Curie constant of C = 3.00 cm³ K mol⁻¹ and Weiss paramagnetic Curie temperature of θ = 16.43 K were observed in fitting according to Curie–Weiss law. These results indicate that there existed a ferromagnetic exchange interaction in the complexes. The observed value of coercive field (H_c) and remanent magnetization (M_r) at 4 K for the compound are 497 Oe and 1.03 Nβ. The presence of spin-glass behaviours in the compound is ascribed mainly to domain mobility or domain growth under different cooling conditions.