反射型体全息光栅对超短脉冲激光光束衍射的性质

在光栅记录介质色散效应的影响下,拓展Kogelnik的耦合波理论研究了反射型体全息光栅对偏振方向垂直和平行于入射面的超短脉冲激光光束衍射的性质。结果表明对于记录在LiNbO3光折变晶体中的体全息光栅,在色散效应、光栅参量和入射条件的共同影响下,光栅对偏振方向垂直于入射面的超短脉冲激光光束衍射的光谱带宽大于对偏振方向平行于入射面的超短脉冲激光光束衍射的光谱带宽,在不考虑光栅介质色散效应的影响时,它们都变大。进一步给出了衍射光的光谱带宽及光栅的衍射效率随入射脉冲的光谱带宽与光栅的光谱带宽比值的变化情况。     

记录结构对体光栅各向异性衍射选择特性研究

以静态体光栅各向异性衍射理论分析模型为基础，将与体光栅厚度有关的记录光强调制度引入到各向异性耦合波方程中.利用耦合波理论分析了光折变晶体中体光栅的各向异性衍射性能，研究了在不同初始记录光强比的条件下，记录光入射角的改变对光折变体光栅各向异性布喇格衍射性能的影响.结果表明：记录光入射角和记录光初始光强比均对体光栅的各向异性衍射具有选择性；与此相比，记录光入射角和记录光初始光强比对于体光栅各向同性衍射不具备选择性.     

超短脉冲激光光束被局域体全息光栅衍射的性质分析

利用二维耦合波理论,分析了超短脉冲激光光束被完全重叠型的局域体全息光栅衍射的时空变化性质,给出了衍射和透射脉冲激光光束沿光栅出射边界的强度时空分布。以LiNbO3晶体为例,数值研究了衍射光脉冲强度沿光栅出射边界的分布和脉冲波形的变化及光栅的总衍射效率受光栅二维尺寸、入射角度、光栅折射率调制度及入射脉冲的脉冲时域半峰全宽等条件的影响而变化的情况。与一维体全息光栅对超短脉冲激光光束衍射的性质,及此光栅对连续光衍射的性质作比较,给出了合理选择光栅参量及入射条件以在光栅出射边界上得到总衍射效率较大且分布较均匀的衍射光脉冲的方法。     

基于双重体光栅的波导显示系统视场扩展研究

体全息波导显示系统的视场角受限于光栅衍射响应带宽,无法满足人们对大视场显示的需求。为扩展波导显示视场角,基于严格耦合波理论模型分析了波导显示视场角的影响因素,进一步提出了一种可有效扩展衍射响应带宽的双重体光栅波导结构,通过变角度分次曝光法完成光栅制备,并搭建全息波导显示系统。成像结果表明,该显示系统的水平和竖直视场角可分别扩展至33.4°和22.6°,对角线视场角为40.3°。     

90°全息记录衍射效率分析与提高

对光折变全息记录特别是双中心全息记录中90°记录结构下较低的衍射效率进行了研究,采用局域衍射理论对90°记录结构的衍射进行了分析,表明在同样的折射率变化和2 mm的光束宽度的情况下,只有当折射率光栅振幅大于10~(-4)时,90°记录结构衍射效率才能够与小角度透射记录结构的衍射效率大致相当。针对环境干扰导致的干涉条纹振动影响光栅记录,提出了有效调制度概念,根据分析90°记录结构的干涉条纹间距很小,容易受外界环境干扰而导致低的折射率变化率,因此应采用主动条纹锁定系统。此外在双中心全息记录中,微观光学参量的优化对衍射效率影响也很重要。     

变波长读出条件下光折变局域体全息光栅的衍射性质

利用二维耦合波理论,研究了用短波长记录全息光栅而用通讯波段内的长波长读出时,用于90°结构垂直读出平板型的光折变局域体全息光栅的衍射性质.讨论了局域体全息光栅的几何尺寸对其衍射效率及光栅布喇格选择性的影响.结果表明,随着光栅的纵向和横向尺寸的增加,光栅的衍射效率也逐渐增加.当光栅的纵向和横向尺寸发生改变但光栅的总面积不变时,光栅衍射效率保持不变.此外,随着光栅尺寸的增加光栅的布喇格选择性越好.在利用短波长记录全息光栅而用长波长读出的光学器件设计过程中,为了获得最佳的衍射效率及其布喇格选择特性,应当根据要求合理地设计光栅的几何尺寸.     

浮雕型全息相位光栅的衍射

本文从理论上推导出了浮雕型相位全息光栅所满足的衍射方程式,并数值计算了光刻胶四种情况下的+1级衍射光的衍射效率与相位光栅刻蚀深度的关系.还和大量实际拍摄的全息光栅作了比较,发现它基本上都能与实验相符；文中还指出了如何选择拍摄参数来控制光栅的刻蚀深度,以确保制作高衍射效率和高信噪比的PET(聚酯薄膜)模压全息片所需要的光刻胶母版拍摄.     

Ce:KNSBN光折变晶体光栅衍射特性研究

研究了Ce:KNSBN光折变晶体两波耦合作用写入体光栅的衍射效率与写入光偏振态和光强比的关系, 分析了写入光偏振态造成光栅衍射效率差别的原因, 并用修正耦合波理论对实验结果进行了拟合。 实验结果为Ce:KNSBN晶体在全息记录和光学信息处理领域的应用提供了依据。     

Ce∶KNSBN光折变晶体光栅衍射特性研究

研究了Ce∶KNSBN光折变晶体两波耦合作用写入体光栅的衍射效率与写入光偏振态和光强比的关系 ,分析了写入光偏振态造成光栅衍射效率差别的原因 ,并用修正耦合波理论对实验结果进行了拟合。实验结果为Ce∶KNSBN晶体在全息记录和光学信息处理领域的应用提供了依据。     

棱镜-光栅-棱镜分光模块整体化设计及衍射特性分析

PGP模块是超光谱成像仪中重要分光器件。为了能够在制作前有效预测PGP整个系统的衍射效率分布及其衍射特性,提出了PGP整体化设计方法。从体位相全息光栅设计角度出发,结合棱镜与光栅各项参数的制约关系,编制了计算PGP整体衍射效率的分析软件,综合考察了棱镜与光栅各项参数对PGP模块衍射特性的影响,讨论了光栅布拉格波长的漂移特性,据此设计了一种用于成像光谱仪的宽波段高衍射效率PGP分光模块。模拟结果表明：棱镜1材料的色散系数越小,PGP的光谱带宽越窄;光栅布拉格波长的漂移增大了PGP模块和光栅的光谱带宽,带宽增大使光栅的角度选择性随之增大,拓宽了棱镜1材料的选择要求;棱镜1顶角、光栅的胶层厚度和相对介电常数调制度等参数是影响PGP衍射效率分布的重要因素,制作时需要精确控制。利用此方法设计的PGP分光模块在400～1 000 nm波段范围内衍射效率不低于50%,并给出具体设计参数,这对PGP制作具有一定的参考价值。     

90°全息记录衍射效率分析与提高

对光折变全息记录特别是双中心全息记录中90°记录结构下较低的衍射效率进行了研究,采用局域衍射理论对90°记录结构的衍射进行了分析,表明在同样的折射率变化和2 mm的光束宽度的情况下,只有当折射率光栅振幅大于10^-4时,90°记录结构衍射效率才能够与小角度透射记录结构的衍射效率大致相当。针对环境干扰导致的干涉条纹振动影响光栅记录,提出了有效调制度概念,根据分析90°记录结构的干涉条纹间距很小,容易受外界环境干扰而导致低的折射率变化率,因此应采用主动条纹锁定系统。此外在双中心全息记录中,微观光学参量的优化对衍射效率影响也很重要。     

局域体全息光栅衍射的平面波与柱面波的波前转换研究

利用一维耦合波理论研究了入射方向相互垂直的一束平面波与一束柱面波干涉形成光折变局域体全息光栅的波前转换情况。给出了透射波和衍射波振幅的解析表达式。讨论了该局域体全息光栅的几何尺寸以及全息透镜的焦距对光栅衍射效率的影响。结果表明,随着光栅横向尺寸的增加,光栅的衍射效率也逐渐增加。然而,光栅的衍射效率却随着光栅纵向尺寸的增加而减小。全息透镜的焦距越长,光栅的衍射效率也越大。此外,分析了光栅的布拉格选择特性,该光栅具有非常好的角度选择特性。在平面波与柱面波干涉形成全息透镜的设计中,为了获得最优的衍射效率,应当根据要求合理地选择记录所用柱面波和设计光栅的几何尺寸。     

Diffraction properties of ultrashort pulsed beams with arbitrary temporal profiles by a reflection volume holographic grating

The diffraction properties of reflection volume holographic gratings are studied when the gratings are illuminated by an ultrashort beam with arbitrary temporal profiles. The modified Kogelnik's theory of coupled waves is used. Simple analytical expressions for spectral and temporal distribution of the transmitted and diffracted are obtained. The dependences of the diffraction bandwidth, the Bragg selectivity bandwidth and the total diffraction efficiency of the reflection volume grating on the temporal profiles of the input ultrashort pulse are investigated. Study shows that the bandwidth of the reflection volume holographic gratings varies with the grating parameters more slowly than the transmitting volume holographic gratings. For three different temporal profiles, numerical results about diffraction properties of the reflection volume holographic gratings are given and compared with the transmitting volume holographic gratings.     

Effect of recording conditions on the anisotropic diffraction of volume holographic gratings

The anisotropic Bragg diffraction of the volume holographic gratings in photorefractive crystals are investigated based on the model of anisotropic coupled-wave theory. The effect of the initial intensity ratio and the recording angles of the two recording waves on the anisotropic Bragg diffraction properties is discussed. It is shown that both the ratio of the initial intensity and the incident angles of the recording waves are selective action for the anisotropic Bragg diffraction efficiency of the volume holographic gratings, while these two recording conditions are not selective action for the isotropic Bragg diffraction. Furthermore, the Bragg phase matching condition of anisotropic diffraction is analyzed when the recording angles change.     

Design of high-efficiency diffraction gratings based on total internal reflection for pulse compressor

We present designs of high-efficiency compression grating based on total internal reflection (TIR) for picosecond pulse laser at 1053 nm. The setup is devised by directly etching gratings into the bottom side of a prism so that light can successfully enter (or exit) the compression grating. Dependence of the −1 order diffraction efficiencies on the constructive parameters is analyzed for TE- and TM-polarized incident light at Littrow angle by using Fourier modal method in order to obtain optimal grating structure. The electric field enhancement within the high-efficiency TIR gratings is regarded as another criterion to optimize the structure of the TIR gratings. With the criterion of high diffraction efficiency, low electric field enhancement and sufficient manufacturing latitude, TIR compression gratings with optimized constructive parameters are obtained for TE- and TM-polarized incident light, respectively. The grating for TE-polarized light exhibits diffraction efficiencies higher than 0.95 within 23 nm bandwidth and relatively low square of electric field enhancement ratio of 5.7. Regardless of the internal electric field enhancement, the grating for TM-polarized light provides diffraction efficiencies higher than 0.95 within 42 nm bandwidth. With compact structure, such TIR compression gratings made solely of fused silica should be of great interest for application to chirped pulse amplification (CPA) systems.     

Design of High-Efficiency Diffraction Gratings Based on Rigorous Coupled-Wave Analysis for 800nm Wavelength

We report on the design of a high diffraction efficiency multi-layer dielectric grating with wide incident angle and broad bandwidth for 80Ohm. The optimized grating can achieve 〉 95% diffraction efficiency in the first order at an incident angle of 5° from Littrow and a wavelength from 77Ohm to 83Ohm, with peak diffraction efieieney of 〉 99.5% at 80Ohm. The electric field distribution of the optimized multi-layer dielectric grating within the gratings ridge is 1.3 times enhancement of the incidence light, which presents potential high laser resistance ability. Because of its high-effieieney, wide incident, broad bandwidth and potential high resistance ability, the multi-layer dielectric grating should have practical application in Ti：sapphire laser systems.     

金纳米颗粒掺杂光致聚合物的体全息混合光栅模型

金纳米颗粒掺杂光致聚合物在全息曝光过程中,光产物周期分布会形成折射率调制相位型主光栅,同时金纳米颗粒周期分布形成由局域表面等离子体共振引起强吸收的振幅型辅助光栅。研究基于耦合波理论的一种混合光栅模型,分析了光栅的体全息光学特性。结果表明,混合光栅中的折射率光栅和吸收光栅都能够提升体光栅的衍射效率; 体光栅的角度选择性也可以得到明显的改善。