首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 93 毫秒
1.
位相可控液晶空间光调制器的研究   总被引:23,自引:19,他引:4  
论述了平行排列液晶的位相调制理论,进行了理论结果的计算模拟.研制出平行取向TFT型液晶空间光调制器并分析了其位相调制特性.结果表明,此平行取向的液晶空间光调制器可用于位相调制,其调整量优于0.7 μm,最小调整步长是0.052 μm.在ZYGO干涉仪上进行的位相控制实验,得到了很好的实验结果.  相似文献   

2.
为了研究索尼LCX029CRT液晶显示器纯位相调制特性,设计了索尼LCX029CRT液晶显示器的驱动电路,并搭建了测试光路对其纯位相调制特性进行了研究,同时对光路进行了理论分析。实验获得一组移动的干涉条纹,实验测试研究结果表明索尼LCX029CRT液晶显示器具有π/2的相位调制特性。  相似文献   

3.
为了研究索尼LCX029CRT液晶显示器纯位相调制特性,设计了索尼LCX029CRT液晶显示器的驱动电路,并搭建了测试光路对其纯位相调制特性进行了研究,同时对光路进行了理论分析。实验获得一组移动的干涉条纹,实验测试研究结果表明索尼LCX029CRT液晶显示器具有π/2的相位调制特性。  相似文献   

4.
高精度纯相位液晶空间光调制器的研究   总被引:18,自引:5,他引:13  
研制了平行排列液晶空间光调制器(LC SLM)。论述了平行排列液晶相位调制的理论,进行了计算模拟。对液晶空间光调制器相位调制特性和振幅调制特性进行了测量,实验结果表明,在整个灰度级范围内是纯相位调制的空间光调制器,并且调制的范围可达到0.6λ。在ZYGO菲佐干涉仪上进行了精度特性的研究,得到了非常好的结果,在1cm^2的面积上,进行了畸变波前的调制,其精度峰谷值可达0.098λ,均方根值可达0.017λ。在此精度的基础上产生了π相位差的栅结构,证明了这种液晶空间光调制器可以很好的进行相位调制。  相似文献   

5.
胡文刚  王永仲  华文深 《光学技术》2007,33(2):216-218,222
基于一维干涉条纹图像的相关分析法可实现液晶空间光调制器相位调制特性的测试。给出了XGA2L11型电寻址液晶空间光调制器的相位现场测试原理、测试装置和测试步骤。利用范德卢格特型光电混合相关器对测试结果进行了实验验证。结果表明,该方法具有原理简单、适应性强和精度高等优点。  相似文献   

6.
液晶空间光调制器的调制特性测量   总被引:1,自引:0,他引:1  
分析了液晶空间光调制器LC2002的工作原理,测量了振幅调制特性和最佳相位调制特性曲线.对经扭曲向列液晶空间光调制后的待测波面进行横向剪切干涉,用CCD记录其干涉图样,采用一维图像分析法得到最大相位调制为0.837π.实验证明液晶空间光调制器可以很好地进行相位调制.  相似文献   

7.
基于空间光调制器的多层图像的构建与可视化   总被引:1,自引:0,他引:1  
为解决实时直观地观察多层再现图像的问题,提出利用发光材料实现其可视化.针对由沿光轴方向的二维图层组成的空间图像,利用高效、快速的三维Gerchberg-Saxton算法,得到位相型计算全息图,并通过计算机进行了数字模拟再现.阐述了三维Gerchberg-Saxton算法的流程,并搭建了基于液晶空间光调制器的位相全息图光学再现与可视化光路.利用液晶空间光调制器的灰度-位相曲线把计算全息图转换为灰度图,加载在液晶空间光调制器上,再现出高质量的三维光场,同时利用量子点材料的荧光特性实现了图像的可视化.实验结果表明,光学再现与计算机模拟结果较吻合.该技术在医学、军事、三维显示、微加工以及显微技术等领域有重要应用价值.  相似文献   

8.
 为解决实时直观地观察多层再现图像的问题,提出利用发光材料实现其可视化.针对由沿光轴方向的二维图层组成的空间图像,利用高效、快速的三维Gerchberg-Saxton算法,得到位相型计算全息图,并通过计算机进行了数字模拟再现.阐述了三维Gerchberg-Saxton算法的流程,并搭建了基于液晶空间光调制器的位相全息图光学再现与可视化光路.利用液晶空间光调制器的灰度-位相曲线把计算全息图转换为灰度图,加载在液晶空间光调制器上,再现出高质量的三维光场,同时利用量子点材料的荧光特性实现了图像的可视化.实验结果表明,光学再现与计算机模拟结果较吻合.该技术在医学、军事、三维显示、微加工以及显微技术等领域有重要应用价值.  相似文献   

9.
基于纯位相液晶空间光调制器的可变焦透镜的实现   总被引:1,自引:0,他引:1  
提出一种基于纯位相液晶空间光调制器(LC-SLM)实现变焦透镜的方法。根据液晶空间光调制器的位相调制原理,以相息图控制LC-SLM来调制入射光波,并衍射产生透镜波面,改变相息图的衍射距离,可实现变焦位相菲涅耳透镜的功能。分析衍射孔径、衍射距离、相息图位相阶数等参数对变焦位相菲涅耳透镜的影响,并以点光源相息图为例对该方法的可行性进行了实验验证。实验结果表明:通过改变计算衍射距离,提出的方法可得到焦距不同的透镜,且易于控制,为三维扫描显示的实现提供了可行性依据。  相似文献   

10.
反射型LCOS器件纯相位调制特性的研究   总被引:11,自引:0,他引:11       下载免费PDF全文
葛爱明  隋展  徐克璹 《物理学报》2003,52(10):2481-2485
研究了反射型的LCOS显示器件的相位调制特性.采用2×2的Jones矩阵计算仿真,从理论上分析了它的相位调制特性,建立了一套测量振幅和相位特性的测试系统.它采用He-Ne激光为光源,用干涉仪观察波前相位,将LCOS显示器件作为液晶空间光调制器,用计算机和相关的电路系统驱动控制,并用CCD采样数据,测试了1024×768 LCOS显示器件的相位调制特性.理论和实验的一致性说明了在特定的入射、出射偏振光配制下,LCOS显示器件可以做纯相位调制器. 关键词: 空间光调制器 液晶显示器 反射型LCOS  相似文献   

11.
An optically addressed parallel-aligned nematic-liquid-crystal spatial light modulator (PAL-SLM) has been studied as a dynamic phase-only light modulation device. The phase modulation characteristics of the PAL-SLM using a liquid crystal display (LCD) as an addressing mask were investigated by analyzing diffraction efficiencies resulting from binary gratings projected from the LCD. A more than 2π phase-only modulation depth was achieved. The highest first-order diffraction efficiency of approximately 38% was also obtained; this is close to the theoretical limit. The experimental results of diffraction efficiencies depending on the phase modulation depth are in good agreement with the simulation for the system operation.  相似文献   

12.
High Efficiency Electrically-Addressable Phase-Only Spatial Light Modulator   总被引:2,自引:0,他引:2  
To realize a high efficiency electrically addressable phase-only modulator, we have coupled a liquid crystal display (LCD) to an optically addressed parallel-aligned nematic liquid crystal spatial light modulator (PAL-SLM) with a set of lenses. Phase modulation exceeding 3ϖ at 532 nm wavelength was obtained. We obtained linear transfer characteristics for phase modulation at various desired phase levels after calibration and adjustment of the transfer characteristics of the PAL-SLM and the LCD. Diffraction efficiency of 40% for binary phase grating and of 90% for 8-level blazed phase grating, which were very close to the simulation values, were observed. The power loss of the readout light was caused when passed through a half mirror, therefore, we examined a setup using an oblique readout light at the modulator. Very high diffraction efficiency was obtained from the setup by optimizing the polarization direction and optical path for this light, and the orientation of liquid crystals. Since the modulator can perform at better than 90% diffraction efficiency and at nearly 100% reflectivity, various high efficiency systems utilizing such modulators are expected.  相似文献   

13.
Hyperresolving (sometimes called 'superresolving' or 'ultraresolving') phase-only filters can be generated using an optically addressable liquid crystal spatial light modulator. This approach avoids the problems of low efficiency, and coupling between amplitude and phase modulation, that arise when using conventional liquid crystal modulators. When addressed by a programmed light intensity distribution, it allows filters to be changed rapidly to modify the response of a system or permit the investigation of different filter designs. In this paper we present experimental hyperresolved images obtained using an optically addressable parallel-aligned nematic LCD with two zone Toraldo type phase-only filters. The images are compared with theoretical predictions.  相似文献   

14.
提出一种基于衍射光栅的液晶相位调制特性测量方法.该方法利用液晶构建相位分别为0和φ的二值光栅,通过傅里叶光学的方法推导衍射光栅第0级衍射光斑光强和调制相位φ之间的关系,然后实测光强和液晶驱动电压之间的对应关系来得到相位和液晶驱动电压之间的对应关系,即液晶相位光栅的相位调制特性.最后利用测量相位调制特性结果构建液晶相控阵,用光束偏转误差验证调制特性测量结果,相位测量误差小于1×10~(-3)rad.  相似文献   

15.
A new method was developed for studying dynamic modulation transfer functions (DMTFs) of liquid crystal display (LCD) based on the slanted edge method, improved wavelet-denoise (IWD) method, and Fourier transformation. Measurements were made for capturing the images of moving step-edge patterns on the display by a slightly tilted pursuit camera. The scanning-rate and contrast-dependent DMTFs of a LCD were demonstrated, and the corresponding parameters such as blurred edge width (BEW), spatial sharpness, and motion picture response time (MPRT) were calculated from the DMTF curves. A simple linear relationship between these parameters was found. The properties of a cathode ray tube (CRT) display were also measured for comparison with those of the LCD.  相似文献   

16.
Holographic data storage applications often use liquid crystal displays as spatial light-amplitude modulators for writing data images. The hologram created in the Fourier plane is usually applied to store the information, since this plane supplies optimal data density. A well known technique for homogenizing the light distribution in the Fourier plane is the application of external random phase modulating masks. The requirement for pixel by pixel matched positioning of the phase modulating mask and the pixels of the spatial light-amplitude modulator is hard to solve in the optical systems and any positioning error leads to significant signal degradations. The article analyses the possibilities of realizing the required simultaneous amplitude and phase modulation of light with the application of a single LCD. Twisted nematic LCDs with different maximal birefringence are numerically investigated using the Jones matrix method. Elliptical incident and exit polarizations are proposed, by which ternary phase-amplitude modulation (+1,–1,0) can be realized. Test measurements are also presented that demonstrate the validity of the calculated results.  相似文献   

17.
 从理论和实验两方面对一种反射式液晶光阀(LCOS)的调制特性进行了研究。着重研究了在高功率激光系统中,反射式液晶光阀作为空间整形器件面临的一些应用问题,特别是它的各种调制特性、整形能力以及对于光束质量的影响。研究发现,与透射式液晶光阀相比,反射式液晶光阀有着明显的优势,效率达到42%,远远优于透射式液晶光阀10%的效率,从而能够实现系统的大幅度简化,是一种非常有潜力的空间光调制器件。  相似文献   

18.
基于正弦条纹投影的三维传感及其去包裹处理   总被引:10,自引:3,他引:7  
康新  何小元  Quan C 《光学学报》2001,21(12):444-1447
采用液晶显示(LCD)投影仪产生的正弦条纹,用四步相移技术对物体进行了三维形貌测量,重点讨论了去包裹问题,对大面积相位间断区的模板标识及含离散相位间断点条纹图的去包裹总是提出了新的处理方法,给出了实际测量及计算结果。  相似文献   

19.
平行式向列液晶实现相移剪切电子散斑干涉术的研究   总被引:1,自引:1,他引:0  
姜力军  刘伟 《光学学报》1996,16(2):44-247
研究了向列型液晶的相位调制特性,采用平行式向列液昌作为相移器建立了相移剪切电子散斑干涉计量系统。该方法将相移技术引入到剪切电子散斑干涉术中,提高了检测精度,采用了相关条纹法求解相位,简化了计算;相移方法简单,可靠。用该系统进行应变场的测量实验,取得了满意的效果。  相似文献   

20.
为了同时获得具有高透射率和反射率的液晶显示器,提出了一种采用平行排列模式与混合排列模式相搭配的单倍盒间距的透反式液晶显示模式.基于液晶盒的初始取向,反射区为混合排列模式,其光程差为透射区平行排列模式的一半.利用单轴膜补偿的方法可以实现宽光谱响应,并且采用不同相位延迟的补偿膜可以使器件工作于常黑模式和常白模式.模拟结果表明:两种工作模式均可实现宽光谱响应,透射与反射电光响应曲线基本趋于一致;在40°方位角度范围内具有很好的可视特性,无灰度反转.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号