Electronic excitation energy transfer between dye molecules in H<Subscript>2</Subscript>O and D<Subscript>2</Subscript>O solutions in the micellar phase

Processes of electronic excitation energy transfer (EEET) in H₂O+D₂O solutions within reversed micelles with different degrees of hydration were studied. It is ascertained that the structure of solutions forms a cluster distribution of interacting molecules having a fractal dimensionality. As a result, in regions with a locally high concentration of the dye molecules, an increase in the EEET efficiency is observed. Solubilization by reversed micelles leads to destruction of the cluster structure of the water system, with the dependence of the EEET efficiency on the degree of hydration being nonmonotonic. As the degree of hydration increases, the inhomogeneities of the structure inherent in bulk water are restored.     

Kinetics of low-temperature initiation of H<Subscript>2</Subscript>/O<Subscript>2</Subscript>/H<Subscript>2</Subscript>O mixture combustion upon the excitation of molecular vibrations in H<Subscript>2</Subscript>O molecules by laser radiation

The initiation of H₂/O₂/H₂O mixture combustion when asymmetric vibrations in H₂O molecules are excited by a resonant IR laser radiation is considered. It is shown that the vibrational excitation of the molecules gives rise to new efficient channels for the formation of chemically active O and H atoms and OH radicals. As a result, the chain mechanism of combustion in the mixtures is enhanced and, as a consequence, the induction time is cut and the ignition temperature is lowered. Even at a minor radiant energy flux delivered to the gas (E_in≈2.5 J/cm²), the ignition temperature of the stoichiometric H₂/O₂ mixture containing only 5% of H₂O may become as low as 300 K.     

Association of rhodamine 6G in light and heavy water solutions

The absorption characteristics of rhodamine 6G molecules in light and heavy water solutions are studied. The association efficiencies of dye molecules and the structure and the binding energy of complexes formed are determined in relation to the solvent composition. The structure of H₂O +D₂O solutions is studied using correlation and low-frequency Raman spectroscopy. The distribution of dissolved complex molecules in the water matrix is shown to have inhomogeneities, which are responsible for a high association efficiency. The characteristic size of these inhomogeneities is estimated. The fractal dimension of the structural formations of light and heavy water molecules is determined as a function of their concentration.     

Spectral-luminescent properties of Eu<Superscript>3+</Superscript> ions in inorganic D<Subscript>2</Subscript>O and POCl<Subscript>3</Subscript>-SnCl<Subscript>4</Subscript> solvents

Absorption and luminescence spectra of Eu³⁺ ions in D₂O and POCl₃-SnCl₄ inorganic solvents were measured. Oscillator strengths and spontaneous radiation transition probabilities for the most intense electron transitions in Eu³⁺ were calculated. Judd-Ofelt parameters, the radiative lifetime of the ⁵ D ₀ metastable level of Eu³⁺ in D₂O-Eu³⁺ and POCl₃-SnCl₄-Eu³⁺ solutions, and matrix elements for radiative transitions from the ⁵ D ₀ level were determined. The luminescence lifetime of the ⁵ D ₀ level of Eu³⁺ in these solutions was measured. The photoluminescence quantum yield for transitions from the ⁵ D ₀ level of Eu³⁺ in ⁵ D ₀ and POCl₃-SnCl₄-Eu³⁺ solutions was found to be 0.32 and 0.88, respectively.     

Reactions C<Subscript>2</Subscript>H<Subscript>2</Subscript> + OH and C<Subscript>2</Subscript> + H<Subscript>2</Subscript>O: Ab initio study of the potential energy surfaces

The stationary points of the potential energy surfaces for the reactions C₂H₂ + OH and C₂ + H₂O are calculated using density functional theory and the coupled cluster method. The relative energies and geometric parameters of the stable intermediates and transition states are in good agreement with the results of independent studies. In most cases, the relative energies differ from the earlier published values by no more than 3 kcal/mol, whereas the rotational constants, by 1–2%. The mechanism of the reaction CCOH₂ → C₂ + H₂O is studied in detail. The possible sources of errors in the calculation methods are examined.     

Oxidation of hydrogen sulfide and corrosion of stainless steel in gas mixtures containing H<Subscript>2</Subscript>S,O<Subscript>2</Subscript>, H<Subscript>2</Subscript>O,and CO<Subscript>2</Subscript>

The composition of volatile and solid products of oxidation of hydrogen sulfide and stainless steel in gas mixtures containing H₂S, O₂, H₂O, and CO₂ has been determined using mass spectrometry, x-ray diffraction analysis, and scanning electron microscopy. It has been shown that holding an H₂S–O₂ mixture at 301 K results in prevailing formation of elemental sulfur and iron sulfides in the form of porous hygroscopic crust on the reactor wall surface. Formation of gas-phase sulfur causes self-acceleration of the oxidation of hydrogen sulfide; the resulting water triggers corrosion of the reactor wall. Heating of the resulting sulfur-sulfide crust in O₂ medium is accompanied by formation of SO₂ and heat release at T > 508 K. After heating of the H₂S–CO₂ mixture to 615 K, H₂ and COS were found in the volatile reactants; no noticeable corrosion of the reactor wall has been detected. It has been established that addition of O₂ to the H₂S–CO₂ mixture and its heating to 673 K leads to formation of ferrous sulfates. The mechanisms of the observed processes are discussed.     

H<Subscript>3</Subscript>O<Stack><Subscript>2</Subscript><Superscript>-</Superscript></Stack> ions with a strong quasi-symmetrical H-bond and their hydration in aqueous solutions of NaOH and KOH

Ion-molecular interactions in aqueous solutions of NaOH (0–47.8%) and KOH (0–51.95%) are studied by multiple frustrated total internal reflection IR spectroscopy. Interpretation of the spectra and analysis of the spectral data are performed based on the results of DFT calculations (B3LYP/6-31++G(d, p)) of the characteristics of the free and double hydrated H₃O ₂ ^- ion. It is established that the changes in the IR spectra of NaOH and KOH aqueous solutions caused by increasing alkali concentration are due to the formation of H₃O ₂ ^- ions with a strong quasi-symmetrical hydrogen bond and their subsequent hydration by one or two water molecules. The influence of the cation nature on the degree of hydration of H₃O ₂ ^- ions is demonstrated. The equilibrium concentrations of monohydrate (H₃O ₂ ^- ? H₂O) and dihydrate (H₃O ₂ ^- ? 2H₂O) are calculated and their IR continuous absorption spectra are isolated.     

Excess thermodynamic quantities of D<Subscript>2</Subscript>O water calculated from its Raman O−D stretching spectra

Excess thermodynamic functions of D₂O water have been calculated from the vibrationally decoupled O−D stretching spectra of very dilute solutions of HOD in H₂O. Comparison of the results with reference calorimetric data for water showed a good correspondence for excess heat capacity above the melting point of ice. The excess enthalpy at the melting point also coincides well with latent heat of melting.     

Effect of Mannosylerythritol lipid-A on light scattering of AOT/D<Subscript>2</Subscript>O/Octane

The light scattering technique is used for the study of interaction of Mannosylerythritol lipid-A on AOT/D₂O/Octane. The collective diffusion of AOT/D₂O droplets soluble in Octane mixed with lipid is founded from a correlation function of light scattering. We focus on the variation of the dynamic behavior of droplets as a function of the lipid concentrations and the size of droplets. The increase of concentration of Mannosylerythritol lipid-A on microemulsion decreases the dynamic of droplets. The SAXS experiment shows the size and the interaction of the droplets change by increase of Mannosylerythritol lipid-A concentration. A hard sphere model can describe the interaction of lipid with AOT/D₂O droplets.     

Accuracy in determination of the temperature and partial pressure of CO<Subscript>2</Subscript> in CO<Subscript>2</Subscript>:N<Subscript>2</Subscript>:H<Subscript>2</Subscript>O:NO<Subscript>2</Subscript> mixtures by multiple-frequency laser probing

We present the results of analysis of the errors introduced by hot-band transitions 11¹0-01¹1, 03¹0-01¹1, 12⁰0-12⁰1 of the CO₂ molecule and the absorption lines of the H₂O and NO₂ molecules in determination of the temperature and partial pressure of CO₂, included in the gas mixture CO₂: N₂:H₂O: NO₂ at atmospheric pressure, by multiple-frequency laser probing using a CO₂ laser tunable over the lines of the 00⁰1-[10⁰0,02⁰0]_I,II ground-state laser transitions. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 6, pp. 810–815, November–December, 2007.     

Internal dynamics of (H<Subscript>2</Subscript>O)<Subscript>2</Subscript> and (D<Subscript>2</Subscript>O)<Subscript>2</Subscript> dimers: III. Description taking into account inversion,exchange and bifurcation motions

Using the symmetry group chain methods, the stationary states of (H₂O)₂ and (D₂O)₂ dimers that correspond to the lowest energy barriers of the inversion, exchange via an intermediate trans configuration, and bifurcation motions are classified taking into account the real geometries of the dimers. A model that rigorously describes the interactions of the motions and leads to a simple algebraic scheme for calculating of both the positions of the levels in the energy spectrum and the intensities of transitions between them is constructed. It is important that the correctness of the model is limited only by the trueness of the choice of symmetry of the internal dynamics.     

The Debye temperature and Grüneisen parameter of the CaLa<Subscript>2</Subscript>S<Subscript>4</Subscript>-La<Subscript>2</Subscript>S<Subscript>3</Subscript> system

The thermal expansion coefficient of solid solutions in the CaLa₂S₄-La₂S₃ system at a temperature of 300 K is investigated experimentally. The Debye temperature, the Grüneisen parameter, and the isothermal compressibility coefficient of solid solutions in the system under investigation are determined from the experimental thermal expansion coefficient. It is demonstrated that, upon substitution of calcium ions for cation vacancies in La₂S₃, the Debye temperature decreases, the isothermal compressibility coefficient increases, and the Grüneisen parameter remains constant for all compositions in the CaLa₂S₄-La₂S₃ system. A correlation between the ionic radii of Ca²⁺ and La³⁺, the concentration of cation vacancies, and the rigidity of the lattice, on the one hand, and the Debye temperature, the Grüneisen parameter, and the isothermal compressibility coefficient, on the other, is revealed for the studied samples.     

Correlation between the dynamics of oxygen atoms and oxidation kinetics of solid solutions based on Bi<Subscript>2</Subscript>Sr<Subscript>2</Subscript>CaCu<Subscript>2</Subscript>O<Subscript>8</Subscript>

The oxidation kinetics of Bi_1.3Pb_0.8Sr₂Ca_0.8Y_0.2Cu₂O_8+δ solid solutions at different temperatures and \(p_{O_2 } = 0.21\) atm is investigated by thermogravimetry. The results obtained are compared with the previously studied oxidation kinetics of Bi_1.3Pb_0.8Sr₂Ca_0.8Y_0.2Cu₂O_8+δ solid solutions. It is found that the substitution of yttrium for calcium leads to an appreciable retardation of the initial oxidation stage associated with the oxygen diffusion. The phonon spectra of the solid solutions are examined using inelastic neutron scattering on a DIN-2PI direct-geometry spectrometer. The high-frequency (>50 meV) phonon densities of states for yttrium-containing and yttrium-free solid solutions are analyzed. The possible model is proposed for a correlation between the differences observed in the high-frequency phonon densities of states attributed to the vibrations of oxygen atoms and the differences in the oxidation kinetics of the solid solutions under consideration.     

Molecular Simulation of H<Subscript>2</Subscript>O,CO<Subscript>2</Subscript>, and CH<Subscript>4</Subscript> Adsorption in Coal Micropores

Based on the chemical model of coal, slit micropores with different pore sizes are established and structures are optimized in the software of materials studio. As the temperature rises, absolute adsorption capacities of H₂O are slightly affected, while absolute adsorption capacities of CO₂ and CH₄ gradually decrease. As the fugacity rises, excess adsorption curves of CO₂ experience increase-decrease-gentle three stages, while the curves of CH₄ gradually decrease. With the increase of pore size, adsorption capacities of H₂O increase, while adsorption capacities of CO₂ and CH₄ gradually decrease. H₂O firstly adsorbs on the oxygen-containing functional group, so the walls of pore are the preferential area for H₂O, while CO₂ and CH₄ choose to adsorb on–C–C–, therefore the walls are the primary area for CO₂ and CH₄. Strong potential in micropores and hydrogen bond among water molecules will promote the water adsorption, while the adsorptions of CO₂ and CH₄ are only induced by the Van der Waals interaction, but the difference between adsorption density and bulk density of CO₂ and CH₄ decides the change of excess adsorption capacity.     

Impact of a physiological medium on the aggregation state of C<Subscript>60</Subscript> and C<Subscript>70</Subscript> fullerenes

The C₆₀ and C₇₀ fullerene-cluster size distribution in aqueous solutions and a physiological medium is studied via dynamic light scattering. The initial aqueous solutions of fullerenes obtained via different methods are found to contain clusters with a characteristic size of about 100 nm. The additional aggregation of fullerenes is observed after their transfer into a physiological medium (0.9% NaCl) and is established to depend on the preparation method. The cluster-size distribution in a fullerene–pectic-acid mixture is found to vary in water and a physiological medium. The results reveal the need for additional studies of the structure and properties of C₆₀ and C₇₀ molecules, as well as their complexes with medicines, in a physiological medium for medical applications.     

Elastic properties of D<Subscript>2</Subscript>O ices in solid-state amorphization and transformations between amorphous phases

Nonequilibrium phase transformations in D₂O ices, including the solid-state amorphization of ice 1h (1h-hda) and the heating-induced transition cascade hda-lda-1c-1h from high-density amorphous (hda) ice to low-density amorphous (lda) ice followed by crystallization in cubic ice 1c and phase transition to ordinary hexagonal ice 1h, were studied using an ultrasonic technique. It has been shown that, as in H₂O ice, the softening of a crystal lattice or an amorphous network precedes nonequilibrium transformations. However, noticeable isotopic differences in the behavior of the elastic properties of H₂O and D₂O, in particular, their 1h and hda modifications, call for a more detailed study of the structural features of these H₂O and D₂O phases.     

Optical characteristics of plasma of I*<Subscript>2</Subscript>, Cl*<Subscript>2</Subscript>, Br*<Subscript>2</Subscript> halogen dimer barrier-discharge excilamps

Barrier-discharge excilamps operating in homonuclear chlorine, bromine, and iodine and their mixtures with inert gases have been studied. The spectral and energy characteristics of the barrier-discharge plasma have been obtained. The conditions have been determined at which the band D′ → A′ predominates in the spectra of molecules I*₂ (342 nm), Cl*₂ (257.8 nm), and Br*₂ (291 nm). The efficiencies of I₂, Cl₂, and Br₂ excilamps were found to be 1.6, 2, and 3.8%.     

Graphite gasification in high-temperature gas flows containing H<Subscript>2</Subscript>O and CO<Subscript>2</Subscript>

The rates of graphite gasification in interaction with high-temperature gas flows were compared. Carbon dioxide and a mixture of water vapor and argon taken in a 1:1 molar ratio were used as reagents. The reactor was a tube furnace; its temperature was varied from 1250 to 1400 K. The rates of graphite gasification in CO₂ and water vapor-argon mixture flows were approximately equal at 1250–1300 K, whereas, at 1350–1400 K, the water vapor-argon mixture exhibited higher reactivity than CO₂. The data obtained were approximated by Arrhenius dependences; the activation energy was found to be 153 kJ/mol for CO₂ and 248 kJ/mol for H₂O-Ar.