木质纤维素生物质催化转化制备苯甲酸

In the present work, we reported a novel route for the conversion of lignocellulosic biomass (sawdust) to a high-value chemical of benzoic acid under atmospheric pressure. The trans- formation involved the catalytic pyrolysis of sawdust into aromatics, the decomposition of heavier alkylaromatics to toluene, and the liquid-phase oxidation of toluene-rich aromatics to benzoic acid. The production of the desired benzoic acid from the sawdust-derived aro- matics, with the benzoic acid selectivity of 85.1 C-mol% and nearly complete conversion of toluene, was achieved using the MnO₂/NHPI catalyst at 100 ℃ for 5 h. The in uence of adding methanol on the catalytic conversion of sawdust to the core intermediate of toluene was also investigated in detail.     

MgO/NaY催化剂上葡萄糖水中异构制取果糖的研究

The MgO/NaY catalysts prepared by impregnation method were used for the conversion of glucose to fructose in water medium.The effects of MgO loading,reaction temperature,glucose concentration and reaction time on the catalytic performance for the reaction were studied.The activity testing results indicated that fructose could be generated effectively by controlling the components of the catalyst and reaction conditions.The maximal fructose yield of 33.8% with the selectivity of 67.3% was achieved over the 10% MgO/NaY catalyst at 100 ℃ for 2 h.Moreover,the catalysts were characterized by XRD,BET,and CO₂-TPD techniques.The structural property of NaY with higher surface area facilitated glucose conversion,and the modulated basicity of the catalyst with MgO addition contributed to the formation of fructose in the tautomerization of aldose to ketose.     

硅铝催化剂催化有机溶剂木质素的解聚

E cient conversion of lignin to fine chemicals and biofuel become more and more attractive in biorefinery. In this work, we used a series of silica-alumina catalysts (i.e., SiO₂-Al₂O₃, HY, Hβ, and HZSM-5) to degrade lignin into arenes and phenols. The relationship between the catalyst structure and lignin depolymerization performance was investigated. The results showed that both acidity and pore size of the catalyst could in uence the conversion of lignin. In the volatilizable product, phenols were identified as the main phenolic monomers via gas chromatography-mass spectrometer. SiO₂-Al₂O₃ was the most effcient catalyst, giving 90.96% degree of conversion, 12.91% yield of phenols, and 2.41% yield of arenes in ethanol at 280℃ for 4 h. The Fourier transform infrared spectroscopy and ¹H nuclear magnetic resonance spectroscopy analysis demonstrated that deoxygenation and alkylation occurred in this process. The effect of solvents was also investigated and the results showed that ethanol was the most effcient solvent.     

Ni/α-Al2O3催化剂作用下苯甲醚的加氢脱氧

Ni-based catalysts supported on di erent supports (α-Al₂O₃,γ-Al₂O₃, SiO2, TiO₂, and ZrO₂) were prepared by impregnation. Effects of supports on catalytic performance were tested using hydrodeoxygenation reaction (HDO) of anisole as model reaction. Ni/α-Al₂O₃ was found to be the highest active catalyst for HDO of anisole. Under the optimal conditions, the anisole conversion is 93.25% and the hydrocarbon yield is 90.47%. Catalyst characteriza-tion using H₂-TPD method demonstrates that Ni/α-Al₂O₃ catalyst possesses more amount of active metal Ni than those of other investigated catalysts, which can enhance the cat-alytic activity for hydrogenation. Furthermore, it is found that the Ni/α-Al₂O₃ catalyst has excellent repeatability, and the carbon deposited on the surface of catalyst is negligible.     

活化气氛对钼基合成醇催化剂的结构和性能的影响

Activated carbon supported Mo-based catalysts were prepared and reduced under different activation atmospheres, including pure H₂, syngas (H₂/CO=2/1), and pure CO. The catalysts structures were characterized by X-ray diffraction, X-ray absorption fine structure, and in situ diffuse reflectance infrared Fourier transform spectroscopy. The catalytic performance for the higher alcohol synthesis from syngas was tested. The pure H₂ treatment showed a high reduction capacity. The presence of a large amount of metallic Co⁰. and low valence state Mo^φ+ (0<φ<2) on the surface suggested a super activity for the CO dissociation and hydrogenation, which promoted hydrocarbons formation and reduced the alcohol selectivity. In contrast, the pure CO-reduced catalyst had a low reduction degree. The Mo and Co species at the catalyst mainly existed in the form of Mo⁴⁺ and Co²⁺. The syngas-reduced catalyst showed the highest activity and selectivity for the higher alcohols synthesis. We suggest that the syngas treatment had an appropriate reduction capacity that is between those of pure H₂ and pure CO and led to the coexistence of multivalent Co species as well as the enrichment of Mo^δ+ on the catalyst''s surface. The synergistic effects between these active species provided a better cooperativity and equilibrium between the CO dissociation, hydrogenation and CO insertion and thus contributed beneficially to the formation of higher alcohols.     

利用原位傅里叶变换红外光谱诊断催化剂的特性和催化活性

The present work establishes a systematic approach based on the application of in-situ Fourier transform infrared spectroscopy (FTIR) for the investigation of the crystal structure, thermal stability, redox behavior (temperature-programmed reduction/temperatureprogrammed re-oxidation) as well as the catalytic properties of Co₃O₄ thin films. The syntheses of Co₃O₄ were achieved by chemical vapor deposition in the temperature range of 400-500℃. The structure analysis of the as-prepared material revealed the presence of two prominent IR bands peaking at 544 cm^-1 (υ₁) and 650 cm^-1 (υ₂) respectively, which originate from the stretching vibrations of the Co-O bond, characteristic of the Co₃O₄ spinel. The lattice stability limit of Co₃O₄ was estimated to be above 650℃. The redox properties of the spinel structure were determined by integrating the area under the emission bands υ₁ and υ₂ as a function of the temperature. Moreover, Co₃O₄ has been successfully tested as a catalyst towards complete oxidation of dimethyl ether below 340 ℃. The exhaust gas analysis during the catalytic process by in situ absorption FTIR revealed that only CO₂ and H₂O were detected as the final products in the catalytic reaction. The redox behavior suggests that the oxidation of dimethyl ether over Co₃O₄ follows a Mars-van Krevelen type mechanism. The comprehensive application of in situ FTIR provides a novel diagnostic tool in characterization and performance test of catalysts.     

高灵敏，高选择和可视化识别Hg2+的罗丹明turn-on型化学传感器

Two novel rhodamine-based fluorescence enhanced molecular probes (RA₁ and RA₂) were synthesized, which were both designed as comparative fluoroionophore and chromophore for the optical detection of Hg²⁺. The recognizing behaviors were investigated both experimentally and computationally. They exhibited high selectivity and sensitivity for Hg²⁺ over other commonly coexistent metal ions in CH₃CN/H₂O (1:1, V/V) solution. Test shows that hydroxy benzene of rich electron was beneficial to the chelate of Hg²⁺ with sensors. The detection limit was measured to be at least 0.14 μmol/L. After addition of Hg²⁺, the color changed from colourless to pink, which was easily detected by the naked eye in both solution and hydrogel sensor.     

The dielectric behaviour of doped near-stoichiometric lithium niobate in the terahertz range

The dielectric properties of near-stoichiometric LiNbO₃:Fe and LiNbO₃:Ce single crystals have been investigated using terahertz time domain spectroscopy in a frequency range of 0.7-1.6 THz at room temperature. When coupled with an applied external optical field, obvious photorefractive effects were observed, resulting in a modulation of the complex dielectric constant for the crystals. The variation in refractive index, |Δn|, had a linear relationship with the applied light intensity, accompanied by a step-like decrease at high intensity. The findings were attributed to the internal space charge field of the photorefraction and the light-induced domain reversal in the crystals.     

Design of wideband graded-index antireflection coatings at oblique light incidence

We suggest a design method of graded-refractive-index (GRIN) antireflection (AR) coating for s-polarized or p-polarized light at off-normal incidence. The spectrum characteristic of the designed antireflection coating with a quintic effective refractive-index profile for a given state of polarization has been discussed. In addition, the genetic algorithm was used to optimize the refractive index profile of the GRIN antireflection for reducing the mean reflectance of s- and p-polarizations. The average reflectance loss was reduced to only 0.04% by applying optimized GRIN AR coatings onto BK7 glass over the wavelength range from 400 to 800 nm at the incident angle of θ₀ =70°.     

Low temperature laser absorption spectra of methane in the near-infrared at 1.65 μm for lower state energy determination

Direct absorption spectra of the 2v₃ band of methane (CH₄) from 6038 to 6050 cm^-1 were studied at different low temperatures using a newly developed cryogenic cell in combination with a distributed feedback (DFB) diode laser. The cryogenic cell can operate at any stabilized temperature ranging from room temperature down to 100 K with temperature fluctuation less than ±1 K within 1 hour. In the present work, the CH₄ spectra in the range of 6038-6050 cm^-1 were recorded at 296, 266, 248, 223, 198, and 176 K. The lower state energy E″ and the rotational assignment of the angular momentum J were determined by a “2-low-temperature spectra method” using the spectra recorded at 198 and 176 K. The results were compared with the data from the GOSAT and the recently reported results from Campargue and co-workers using two spectra measured at room temperature and 81 K. We demonstrated that the use of a 2-low-temperature spectra method permits one to complete the E″ and J values missed in the previous studies.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.