用于投影机的发光二极管照明单元

目前的投影机光源——高压汞灯存在寿命短、色温高、存在有害光线、发热集中等缺点,严重制约了投影机进入家庭应用领域。发光二极管的最近发展为其作为高压汞灯的替代光源提供了可能性。提出了一种由一个发光二极管、一个准直镜、一个前蝇眼透镜和一个后蝇眼透镜组成的用于投影机的发光二极管照明单元,由数个照明单元加上会聚透镜则构成一个基本的照明系统。发光二极管的发光经准直镜压缩光束发散角后被前蝇眼透镜分割为多个细光束,会聚透镜将每个细光束都叠加会聚到显示芯片上,实现光能量的会聚和光场再分布．以满足投影机对光通量和光场均匀性等方面的要求,后蝇眼透镜用于与后续光路的匹配。作为照明单元的一个应用实例,文中分析了一种单片式硅上液晶投影机。     

功率型发光二极管的研究与应用进展

文章首先对功率型发光二极管的起源和发展作了回顾和简要的叙述．然后以固体光源照明为目标，给出了几种可见光功率发光二极管芯片和封装的典型结构，并且对它们各自的特点进行了比较．最后指出了功率发光二极管作为固体光源取代真空灯泡用于照明在未来的五至十年内将成为现实．     

金属有机化学气相沉积外延技术生长GaN基半导体发光二极管和激光二极管(Ⅱ)

如今，InGaN／GaN基量子阱发光二极管已经商业化，而且InGaN／GaN基量子阱激光二极管已实现连续波室温运转，使用寿命超过10000小时，虽然如此，但还没有完全搞清楚这些器件的发光机理．试验中通常使用连续输出He-Cd激光器（325nm）作光源，或者使用20—50mA注入电流来研究In—GaN量子阱样品或发光二极管光学性质，本文上篇研究了量子阱厚度与发光二极管发光功率的关系，lnGaN和GaN之间的晶格失配产生压电场，从而导致量子束缚斯塔克效应，而量子束缚斯塔克效应强     

发光二极管测试技术和标准

文章从发光二极管的空间能量分布和光谱能量分布两个方面叙述了光和辐射参数测试的原理和方法．讨论了辐射通量和光通量的基本概念、测量方法及相互之间的关系．在实际应用中，发光二极管的发光强度和辐射功率及他们的空间分布是常需要测量的参数．文章从基于人类视觉特性的色度学原理出发，讨论了发光二极管的光谱能量分布和重要的色度学参数以及相应的测试标准问题．     

半导体照明发光二极管(LED)芯片制造技术及相关物理问题

以化合物半导体材料为发光元件的半导体固态照明正引发人类照明史上的又一次伟大革命.目前,局限半导体照明广泛应用的主要技术瓶颈有：出光效率（或外量子效率）,单管最大可发光通量（或最大可工作功率）,单位光通量的成本和发光二极管可正常使用寿命.文章综述和分析了与芯片发光效率（或外量子效率）和单芯最大可发光通量（或最大可工作功率）相关的制造技术和相关物理问题.     

一种新型的基于非成像光学的LED均匀照明系统

为解决发光二极管(LED)作为朗伯光源难以直接应用的问题,运用非成像光学设计方法,实现了一种新型的基于LED的均匀照明系统,它能够在一个特定位置的屏幕上形成一个具有特定尺寸的均匀圆形光斑。使用基于蒙特卡罗法的光线追迹软件对该光学系统进行模拟仿真,结果显示屏幕上光斑的均匀度优于85%,系统效率高于82%。     

LED照明自适应驱动电源的研制

针对半导体发光二极管(LED)作为照明的驱动特性,设计了一种基于开关电源的自适应LED驱动电路。利用高密度电源控制芯片sa7527实现了LED的恒流驱动和过压保护,通过对输出光强和LED温度的检测实现了光衰的自动补偿功能。实际应用表明,该驱动电路可满足LED作为照明的实际需要,并且具有宽电压输入范围、高效率和光衰补偿功能。     

辐射与发光 发光与发光器件

TN312．8 2005064014 绿色光源-LED=Green light sources-LED[刊,中]/武 毅(清华大学建筑设计研究院．北京(100084))∥灯与照 明．-2005,30(2)．-45-48,53 介绍了发光二极管(LED)的结构、发光原理,阐述了 作为绿色照明光源的发光二极管的特点及应用前最。图2 表3参2(杨妹清)     

金刚石紫外发光器件研究进展

蓝光或紫外激光在光电子学和光储存方面有广阔的应用，一直是国际上关注的前沿领域．而金刚石是最好的半导体紫外发光材料．特别是用于高温、高压、高功率、强辐射和强腐蚀环境中更能显示其优越性．目前人们已在实验上用同质外延、异质外延的方法制备了金刚石紫外发光二极管，观察到了较强的紫外光发射．人们尝试用金刚石与其他半导体材料结合的方法，成功地研制出了金刚石紫外发光二极管，开拓了该研究领域最新研究方向．文章对这些金刚石紫外发光器件研究的最新进展进行了评述．     

用于暖白光LED的新材料

发光二极管通常被称为“LED”，因其能源效率和耐久性而众所周知。但是当前的白光LED所发出的蓝冷光阻碍了LED室内照明的应用。     

New collection systems for multi LED light engines

Light emitting diodes (LEDs) have numerous advantages as light sources in projectors. LEDs are more compact, exhibit a larger color gamut, have a longer lifetime, and need a lower supply voltage. However, there is still one important disadvantage: the optical power per unit of étendue (luminance) of an LED is significantly low. As a result of the étendue limitations of LEDs, the projected flux on the screen will not be high. Despite this shortcoming, LED’s are still of great interest for low power applications because of their other superior properties. Thus we collect the available light flux optimally and combine multiple high luminance LEDs within the system. In this study we discuss three collection systems designed to collect the LED flux with high optical efficiency while retaining small device size. The best collection efficiency attained with our collection systems is 96%. The fabrication tolerance and cost of our collection systems are also analyzed.     

Nonspherical LED packaging lens for uniformity improvement

Light emitting diode (LED) has more advantages compared with a traditional incandescent light bulb and a fluorescent lamp, such as small size, low quantity of heat, long life, low power consumption, fast response, plain packaging and ease of develop ment of a frivolous short product. A methodology is proposed to improve the uniformity of the LED illumination system. As a light source in a backlight unit (BLU), the requirement for optical characteristics of a LED is different from highly directional conventional ones. New diffused-type LEDs need to be developed to fulfill the requirement of the BLU industry. A non-spherical lens is designed to optimize uniformity, and a great improvement in uniformity from 28.4 to 64% is demonstrated. In the future, it may used in an LED display to improve the unevenness of illumination.     

多基色混合白光LED显色性优化研究

为优化多基色混合白光LED的显色性,得到色彩生动的白光LED照明效果,以评价饱和红色的特殊显色指数R₉为研究对象,通过多基色光源混合白光LED的光谱功率分布的高斯数学模型,选取峰值波长λ_m、半波宽Δλ和幅值A为基色光源光谱功率分布的主要参量,并以“蓝光芯片+YAG黄色荧光粉”和“红、绿和蓝基色LED”为分析模型分别进行二基色和三基色混合白光LED显色性研究,讨论两种基色混合情况下三个参量对混色白光LED的显色性R₉贡献。结果表明：为使多基色混合白光LED的显色性更好,首先确定光源S1的峰值波长λ_m1、半波宽Δλ₁及幅值A₁;然后设定其他基色光源幅值A_i以求此条件下峰值波长λ_mi和半波长Δλ_i取值范围;最后在求得的峰值波长λ_mi和半波长Δλ_i取值范围,反求基色光源的最佳幅值A_iopt,从而使多基色混合白光LED的显色性达到最佳效果。该方法对分析基色混合白光LED的显色性具有理论参考价值。     

光谱分布可调光源的LED筛选研究

针对LED光谱分布可调光源对LED寿命以及光谱一致性的要求,对可见光和近红外波段的29种LED分别进行200 h的电流加速老化试验,并提出LED光谱一致性筛选算法。老化试验结果表明:峰值波长为385 nm、400 nm 和420 1 nm 3种LED的辐射通量平均衰减分别为24.8 %、10.7 %和25.6 %,不能用于LED光谱分布可调光源;剩余的26种LED的辐射通量平均衰减量均低于3.5 %,可作为光谱分布可调光源的内部光源。LED光谱一致性筛选算法以LED光谱数据为基础,计算同类LED间的相对光谱偏差,26种LED的相对光谱偏差均小于4.5 %,保证了所筛选出LED的光谱一致性。     

传统白光LED与远程荧光粉白光LED的发光性能比较

研究了传统白光LED与蓝光激发的球冠形远程荧光粉白光LED在不同电流、不同热沉温度下的发光性能,并对其机理差异展开了探讨。实验结果表明：随热沉温度和驱动电流的上升,传统白光LED的量子效率和电光转换效率急剧下降,并导致其Y/B比（Yellow/Blue Ratio）下降,相关色温上升。而在远程荧光粉白光LED中,其量子效率、光转换效率和相关色温在相同实验条件下变化幅度都较小。由光强空间分布和Y/B比空间分布可知,远程荧光粉白光LED的光强分布呈类似蝠翼分布,且Y/B比空间均匀性远大于传统白光LED。     

GaN基LED倒装芯片蓝宝石衬底半球型图形优化设计

为了提高GaN基LED芯片的光提取效率,以GaN基LED芯片为研究对象,建立了在蓝宝石衬底出光面和外延生长面上具有半球型图形的LED倒装芯片模型,并利用光学仿真软件对图形参数进行优化设计。实验结果表明:在蓝宝石衬底的出光面和外延生长面双面都制作凹半球型图形对芯片光提取效率的提高效果最好,并且当半球的半径为3 m,周期间距为7 m时,GaN基LED倒装芯片的最大光提取效率为50.8%,比无图形化倒装芯片的光提取效率提高了115.3%。     

White light‐emitting diodes: History,progress, and future

About twenty years ago, in the autumn of 1996, the first white light‐emitting diodes (LEDs) were offered for sale. These then‐new devices ushered in a new era in lighting by displacing lower‐efficiency conventional light sources including Edison's venerable incandescent lamp as well as the Hg‐discharge‐based fluorescent lamp. We review the history of the conception, improvement, and commercialization of the white LED. Early models of white LEDs already exceeded the efficiency of low‐wattage incandescent lamps, and extraordinary progress has been made during the last 20 years. The review also includes a discussion of advances in blue LED chips, device architecture, light extraction, and phosphors. Finally, we offer a brief outlook on opportunities provided by smart LED technology.

     

Recent progress in single chip white light-emitting diodes with the InGaN underlying layer

Tremendous progress has been achieved in white light-emitting diodes (LEDs). To further improve the quality of white light and simplify the fabrication process, a single chip white-light LED with the InGaN underlying layer (UL) was studied and fabricated. The turn-on voltage of this type of LED was 2.7 V, and the spectrum at a forward bias current of 20 mA was comprised of blue (443 nm) and yellow (563 nm) lights. The intensity ratio of blue to yellow light was almost constant with the in- creasing injectio...     

Photonic crystal LEDs – designing light extraction

Photonic crystals (PhCs) have attracted much attention during the last decade as a solution to overcome the low extraction efficiency of as‐grown light‐emitting diodes (LEDs). In this review we describe the underlying physics and summarize recent results obtained with PhC LEDs. Here, the main focus is on diffracting PhC. In order to quantify the benefit from the incorporation of PhCs for diffracting light a comparison by simulations between a PhC LED and a standard state‐of‐the‐art LED is carried out. Finally, the impact of the PhC on the LEDs emission characteristics will be discussed with respect to étendue‐limited applications.