Artificial Neural Network Models for Coaxial to Waveguide Adapters

Artificial neural networks provide fast and accurate models for the modeling, simulation, and optimization of microwave and millimeter wave components. In this paper, a multilayer perceptron neural network (MLPNN) is used to model a millimeter wave coaxial to waveguide adapter. The MLPNN is electromagnetically developed with a set of training data that are produced by the full-wave finite-difference time-domain (FDTD) method. One type of the designs of experiments, the central composite technique, is used to allow for a minimum number of FDTD simulations that is needed to be performed. The MLPNN models are useful for the CAD of wideband coaxial to waveguide adapter.     

A Compact Monopulse Radial Line Slot Array Antenna at Millimeter Wavelengths

This paper describes the design and performance of a radial line slot array antenna (RLSA) which generates sum or difference far field patterns. The antenna consists of rectangular waveguide to radial line transition, radial line and slot arrays etched on the upper plate of the radial line. A novel rectangular waveguide to radial line transition is designed to build up the dominate TEM mode in radial line to excite the slot arrays which are arranged in concentric rings on the upper plate of the radial line. The antenna radiates linear polarization at Ka band. Monopulse operation is obtained by a sum and difference network which is a compact eight-port comparator consisting of coplanar magic tees. The sum and difference network is waveguide structure whose loss is less than that of microstrip structure at millimeter wave lengths. The monopulse performances can be used in monopulse tracking and anti-collision application etc. Genetic algorithm (GA) is applied to optimize the parameters of the transition and antenna to obtain good performances. Note: Part of this paper has been presented in the oral session ThuA5 on Transmission Lines and Antennas in IRMMW-THz2006 Conference, pages: 535.Number: 376636Title: Radial line slot array antenna at millimeter wave lengths     

Analysis of the H-Plane T-Junction Millimeter Wave Waveguide Circulator with a Ferrite Sphere

This paper presents an approximate but efficient field treatment of the new easy-to-fabricate ferrite sphere based H-plane waveguide circulator for potentially low-cost millimeter wave communication systems. A new three-dimension modeling strategy using a self-inconsistent mixed coordinates based mode matching technique is developed, i.e. the solutions of the Helmholz wave equations in the ferrite sphere and in the surrounding areas are deduced in the form of infinite summation of spherical, cylindrical and general Cartesian modes respectively. The point matching method is then used on the interface to numerically obtain the coefficients of different orders basis functions of the field. Therefore, the field distributions as well as the characteristics of the circulator are numerically calculated and the good agreement is observed between the numerical results and the measured data.     

Full-Wave Analyses of Coaxial to Waveguide Adapters by the FDTD Method

The finite-difference time-domain (FDTD) method is applied to the full-wave analyses of the electrical properties of millimeter wave coaxial to waveguide adapters. The results are useful for the design of wideband coaxial to waveguide adapter.     

Calculation of external circuit impedances of mm-wave oscillator cavities by a rigorous field analysis method

This paper presents a generalized field analysis method for calculating the external circuit impedances looking outside from the active devices of some millimeter wave oscillators. For a simple oscillator model with a radial disc and a diode existing in a rectangular waveguide, the numerical results are in agreement with the experimental data. Impedance characteristics for several different oscillator configurations are given, and some useful conclusions for oscillator design are derived.     

Fast Stimulation of Millimeter Wave Waveguide Filters by Boundary Marching Method

The boundary marching method is applied for the analysis of the waveguide bandpass filers. The vector finite element method with the perfectly matched layers (PML) as the matching load is given for parameter extraction of millimeter wave filters. The implementation of the fast boundary marching method is described in detail. The reflection and insertion losses of millimeter wave filters are obtained and compared with those obtained from literature.     

Mode matching analysis of the dielectric waveguide 3-D discontinuity problem

In this paper, the dielectric waveguide 3-D discontinuity problem is investigated by the method which combines the multimode network theory with the rigorous mode matching procedure both in the transverse cross section and in the longitudinal direction. Good agreement has been found between the numerical results and the experimental data in the literature, and the effectiveness and accuracy of the present method are justified. Some numerical results are given to establish useful guidelines for the design of dielectric waveguide components in the millimeter and optical wave integrated circuits.     

Method for radar cross section measurements in millimeter and submillimeter wave regions

We present a new method for electromagnetic modeling radar scattering processes. In this method we use a quasi-optical waveguide of the type of "hollow dielectric waveguide" as a fundamental component of radar cross section (RCS) instrumentation systems. Such waveguide structure produces required target-illuminating quasiplane wave and suppresses unwanted waves as well as transmits the legitimate signal from test object, mounted inside this waveguide, to the reception zone. Presented method is especially effective one in millimeter and submillimeter wave regions, in particular, for investigation RCS of targets with small reflectivity.     

Artificial Neural Network Model for the Gap Discontinuity in Shielded Coplanar Waveguide

Fast and accurate component models are essential for the development of three dimensional millimeter wave integrated circuits. In this paper, an accurate and efficient artificial neural network (ANN) model for the gap discontinuity in shielded coplanar waveguide is presented. The ANN model is developed with a set of training data given by the finite-difference time-domain simulation and can be used in the frequency scope of 0100GHz.     

Analysis of the characteristics of NRD waveguides loaded with periodic metallic strips by using the method of lines for millimeter wave filter and antenna application

In this paper, the propagation characteristics of NRD waveguide loaded with periodic metallic strips are analyzed in terms of the method of lines. Numerical results show that such structures are most suitable for millimeter wave bandstop filter and NRD waveguide beam scanning leaky wave antenna application.     

Application of Preconditioned GMRES Algorithm for Analysis of Millimeter Wave Ferrite Sphere Circulators

The generalized minimal residual (GMRES) iterative method is applied to solve such sparse large non-symmetric system of linear equations resulting from the use of edge-based finite element method. In order to speed up the convergence of GMRES, the symmetric successive overrelaxation (SSOR) preconditioning scheme is applied for the analysis of millimeter wave ferrite circulator. Consequently, this preconditioned GMRES (PGMRES) approach can reach convergence ten times faster than GMRES. The reflection and insertion losses of millimeter wave waveguide circulator are compared with those obtained from literature.     

Application of Preconditioned GMRES Algorithm for Analysis of Millimeter Wave Ferrite Sphere Circulators

The generalized minimal residual (GMRES) iterative method is applied to solve such sparse large non-symmetric system of linear equations resulting from the use of edge-based finite element method. In order to speed up the convergence of GMRES, the symmetric successive overrelaxation (SSOR) preconditioning scheme is applied for the analysis of millimeter wave ferrite circulator. Consequently, this preconditioned GMRES (PGMRES) approach can reach convergence 19 times faster than GMRES. The isolation and insertion losses of millimeter wave waveguide circulator are compared with those obtained from literature.     

A compound high power millimeter wave waveguide circulator

In this paper, a high power millimeter wave waveguide Y-junction circulator, which is compound in structure, has been analyzed and developed. Its enduring power attains 60 W CW-power and the temperature of the waveguide surface does not exceed 25 degree centigrade under natural coolness.     

Folded waveguide circuit for broadband MM wave TWTs

In millimeter wave band, the folded waveguide circuit exists some advantages such as wide operating frequency band, high mechanism strength, better heat disspation, easy fabrication and lower cost. It is expected that contradictory between broadband and high power in millimeter wave range can be solved by using the folded waveguide circuit. Computational results of dispersion character and coupling impedance of the folded waveguide are given. It is shown that the folded waveguide has wide bandwidth character in millimeter wave band.     

Field Patterns of the TE Modes in Ridge-Trough Waveguide

A single-ridge waveguide with a symmetrical longitudinal trough, designated as a ridge-trough waveguide has been used as a transition in a V-band (50-75 GHz) wafer probe recently. In this paper, the field patterns for the dominant TE mode and the first higher TE mode in ridge-trough waveguide with different configurations are presented by finite element method. The field patterns in this paper have important values for us to understand the transmission characteristics of ridge-trough waveguide, and will be of practical significance in designing ridge-trough waveguide components in microwave and millimeter wave engineering.     

The development of nonradiative dielectric waveguide transmitting front-end in Ka-band

The operating theory,design method and experimental results of the nonradiative dielectric waveguide (NRD-guide) transmitting front-end in millimeter wave band are related in details in this paper. As a kind of dielectric waveguide,the NRD-guide possesses fine transmission performances, and it can be used to fabricate the millimeter wave hyterodyne integrated circuits. The two kinds NRD-guide transmitting front-ends substantiated in the paper, the voltage controlling oscillator(VCO) and twin-Gunn-diode power-combiner,have very similar structures to each other and possess compact sizes, fine machinery and electric performances.For the VCO front-end in Ka-band, the frequency modulation band is greater than 150MHz, the output power is larger than 20mW.For the power-combiner, the output power is larger than 40mW,the combination efficiency is better than 90%,the frequency stabilization reaches 1.68×10^–5. Combined with the receiving front-end reported before,the transmitter and receiver can be composed to a dielectric waveguide R/T module to be applied in some millimeter wave sub-systems.     

Efficient Analysis of Millimeter Wave Ferrite Circulators by the GMRES Iterative Algorithm

The finite element method (FEM) combined with the perfectly matched layers (PML) is given for simulation of waveguide ferrite circulators. The generalized minimal residual (GMRES) iterative method is applied to solve such sparse large non-symmetric system of linear equations resulting from the use of edge-based finite element method. The formulation of FEM and the algorithm of GMRES method are described in detail. The reflection and insertion losses of millimeter wave waveguide circulator are analyzed and the results are compared with those obtained from literature.     

毫米波折叠波导行波管输入输出过渡波导设计

折叠波导以其宽频带、加工方便而成为一类重要的毫米波与太赫兹波段行波管慢波线。针对折叠波导慢波系统与标准波导的匹配过渡连接,通过等效电路分析与电磁计算软件模拟,设计出了直渐变波导、双曲圆弧渐变波导、切比雪夫阶梯渐变波导3种输入输出过渡波导结构,分析了各种过渡波导的优缺点及结构尺寸对性能的影响。计算表明,经过合理优化的设计,3种过渡结构均可以使反射系数在28~40 GHz波段小于0.05。     

Millimeter wave source in the rectangular waveguide cavity

This paper describes a power combiner of solid—state millimeter wave in rectangular cavity. The operating frequency is about 50 GHz. And the sources of excitation are GaAs Gunn deodes. Final presents the performance parameter, combining efficiency, tuning range, frequency drift, and FM noise, etc. This paper also presents a millimeter wave source of rectangular waveguide cavity. Using an exellent algorithm to design rectangular waveguide cavity of power combimer. The algorithm gives the mathematial model, on the basis of the mathematial model, using CAD of PC microcomputer to design the parameters of the cavity. This paper presents a program of CAD of micocomputer.     

Gyrotron traveling wave amplifier with out-ridged waveguide

The out-ridged waveguide is proposed for the use of gyrotrons operating at higher harmonics of electron gyrofrequency. Eigenvalues and the associated field components of the out-ridged waveguide are obtained with Ritz-Galerkin method. The prominent advantages of the out-ridged waveguide over the existing waveguide structures used in gyrotrons include the simplicity in manufacture, freedom from local modes, good separation of lower order modes, high power handling ability, and good beam-field coupling at higher harmonics of the electron gyrofrequency. Gain-frequency functional curves of the gyrotron traveling wave amplifiers with the out-ridged waveguide and some other waveguide structures are computed numerically by employing the general analytical results developed in [15].