Modified Michelson interferometer for probing refractive index of birefringent crystal CSBN50

Based on the modified Michelson interferometer and phase analysis method, a high-accuracy method for probing the refractive index (RI) of transparent medium is proposed. The validated test was performed on a birefringent crystal CSBN50 with the estimated accuracy being up to 10⁻⁴. The ordinary and extraordinary refractive indices of CSBN50 at 632.8 nm are determined as n₀=2.32853±0.00016 and n_e=2.27664±0.00016, respectively.     

Q-switch of a continuously pumped CO2 laser with a scanning coupled-cavity Michelson mirror

We report on the possibility of Q-switching a continuously pumped CO₂ laser using a scanning Michelson interferometer as an end mirror, instead of the habitual well-known strategies. This method, in addition to its simplicity, produces free tail relaxation pulses having duration of about 1.3 μs, which is comparable to what can be obtained when using a saturable absorber. A pulse repetition frequency as high as 90 kHz is obtained.     

Dispersion error of a beam splitter cube in white-light spectral interferometry

We revealed that the phase function of a thin-film structure measured by a white-light spectral interferometric technique depends on the path length difference adjusted in a Michelson interferometer. This phenomenon is due to a dispersion error of a beam splitter cube, the effective thickness of which varies with the adjusted path length difference. A technique for eliminating the effect in measurement of the phase function is described. In a first step, the Michelson interferometer with same metallic mirrors is used to measure the effective thickness of the beam splitter cube as a function of the path length difference. In a second step, one of the mirrors of the interferometer is replaced by a thin-film structure and its phase function is measured for the same path length differences as those adjusted in the first step. In both steps, the phase is retrieved from the recorded spectral interferograms by using a windowed Fourier transform applied in the wavelength domain.     

A white-light interferometer using a lamp source and heterodyne detection with acousto-optic modulators

A heterodyne technique for white-light interferometer with a lamp source, which uses two acousto-optic modulators, is developed for high-sensitivity detection of weak light. By using converging input beams input into a Michelson interferometer with spherical mirrors, the spectral dependence of the modulators is canceled, and the white-light heterodyne interference fringes are generated at 200 kHz. Using a tandem interferometer, the object surface which has a low surface reflectivity of less than 10⁻⁴ was detected with a good signal-to-noise ratio.     

Demonstration of a recombined Fabry-Perot-Michelson interferometer with suspended mirrors

We describe preliminary experimental results concerning the operation of a 3 m arm-length Michelson interferometer with two Fabry-Perot cavities whose mirrors and beam splitter are suspended independently by wires. The reflected light beams from the two Fabry-Perot cavities are recombined to obtain interference at a photo-detector; this scheme is necessary for future power-recycled laser interferometers used to detect gravitational waves. The fundamental properties of the interferometer are presented, including the power spectral density of the displacement noise.     

Interferometry with Phase Conjugate Mirrors and Measure of One-Way Velocity of Light

A Michelson interferometer with a phase-conjugate mirror (PCM) is described and discussed. The behavior of phase conjugate mirrors is discussed and the result of an experiment with a Michelson interferometer with a phase-conjugate mirror is described and commented. This interferometer has been proposed to be used to test the intrinsic non-locality of quantum mechanics. In this paper a new experimental setup to study the one-way velocity of light is proposed, which uses this new interesting device.     

Laser frequency control by spectrally depleted destructive two-beam interference

We describe, and present experimental evidence to support, a new technique capable of producing sufficient frequency displacement and bandwidth compression to permit near perfect coincidence in frequency and width between the output of a CO₂-TEA laser and a Doppler broadened absorption line. This is accomplished by replacing one of the laser end mirrors with a Michelson interferometer that is adjusted for destructive interference and by placing the absorbing gas in one of its arms.     

A high efficiency polarizing interferometer for the far infrared fourier-transform spectroscopy

Conclusion The new polarizing interferometer was constructed, in which all the radiation entering the interferometer can be utilized. From the experimental results in the atmosphere and for the water-vapour, it is seen that this spectrometer can work satisfactorily from 5 cm^–1 to 1/2d cm^–1. Comparison of the spectrun by this interferometer with one by the standard Michelson interferometer shows that the gain of luminosity is almost as expected. Grid with substrate causes the interference and produces the spectral response in the higher frequency region. Another configuration of two grids and two plane mirrors is proposed for the polarizing interferometer of high luminosity and of very simple design.     

A laser interferometer for measuring electron densities in an arc plasma

A Michelson interferometer working simultaneously at two wavelengths is used to follow the decay of the electron density n_e along the axis of a short-circuited dc-argon arc. Using optical isolation, compensating mirrors and quadrature signal detection results in a random error of 1% for n_e=5×10¹⁶ cm^-3.     

Automated interferometric technique for express analysis of the refractive indices in isotropic and anisotropic optical materials

This paper deals with the technique for the refractive index measurements based on the interferometry of a rotated parallel plate (IRPP). The device consists of the Michelson interferometer, the sample rotation system and the optoelectronic registration system. A refractive index of parallel plates is determined by their rotation through measuring simultaneously a shift of interference fringes. Although the IRPP technique is known from long ago [Shumate MS. Appl Opt 1966;5:327] several considerable improvements have been done in order to improve the accuracy of the method. The measuring process is completely automated. The method has been tested on the model crystals of the lithium niobate giving the magnitudes for ordinary and extraordinary refractive indices as n₀=2.2865±0.0007 and n_e=2.2034±0.0007. A considerable increase of accuracy is reached in our case by an automation of the measuring procedure, development of a new software as well as implementing the interferometric method for a precise determination of a sample zero position. The automated refractometer is offered for use in research laboratories and industry.     

Optical resonator for high-power transverse flow CO2 lasers

A new design of the U-type resonator is described. In this way, a laser beam with symmetrical intensity profile (regarding to a symmetry plane) can be extracted from an active medium that exhibits gain asymmetry along one of the transverse directions. The whole area of the active medium cross-section can be used, and consequently the laser efficiency will be increased. This resonator structure was applied for efficiency power extraction (as a low order TEM modes laser beam) from a DC excited transverse flow CO₂ laser with cylindrical geometry. Although the cross-section area of the discharge was entirely used (including the cathode fall region), a symmetrical intensity profile of the laser beam (regarding to the two orthogonal symmetry planes) was obtained in the near field as well as in the far field; the gain asymmetry along the flow direction was compensated by the gas circulation fluidodynamical circuit with two counterflowing discharge channels. A double-U optical resonator was introduced in order to provide a laser beam with axial symmetry.For the practical construction of these two types of optical resonators we have developed two new types of 90° deflection elements: the first one, which does not reverse the image (and which has the properties of the pentaprism), and the second one, which rotates the image with 90° angle. Both elements exhibit good focusability if they are equipped with two concave mirrors.     

Failure of a proposed superluminal scheme

We consider a “superluminal quantum Morse telegraph”, recently proposed by Garuccio, involving a polarization-correlated photon pair and a Michelson interferometer in which one of the mirrors is replaced by a phase-conjugating mirror (PCM). Superluminal information transfer in this scheme is precluded by the impossibility of distinguishing between unpolarized photons prepared by mixing linear polarization states or by mixing circular polarization states.     

Control of susceptibility-related image contrast by spin-lock techniques

Macroscopic magnetic field inhomogeneities might lead to image distortions, while microscopic field inhomogeneities, due to susceptibility changes in tissues, cause spin dephasing and decreasing T₂ relaxation time. The latter effects are especially observed in the trabecular bone and in regions adjacent to air-containing cavities when gradient-echo sequences are applied. In conventional MRI, these susceptibility-related signal voids can be avoided by applying spin-echo (SE) techniques. In this study, an alternative method for the examination and control of susceptibility-related effects by spin-lock (SL) radiofrequency pulses is presented: SL pulses were applied in two different susceptibility-sensitive sequence types: (a) between the jump and return 90° pulses in a 90°_x−τ−90°_−x magnetization-prepared Fast Low Angle Shot (FLASH) sequence and (b) between the 90° pulse and the 180° pulse in an asymmetric SE sequence. The range of Larmor frequencies used for spin locking can be determined for different B₁ amplitudes of the SL pulses, allowing control of image contrast by the amplitude of the SL pulses.     

Interferometric method of checking parallelism and prism angles

Examples are given of a quick and convenient method of testing optical components: the parallelism of glass blocks; the 90° angle error and pyramidal error of a porroprism; and the error in the 45° angles of a right angle prism. A He-Ne laser source is used and the component to be tested acts as an interferometer.     

The use of circular optical grating for measuring angular rotation of mirrors

This paper explores the feasible use of circular optical grating for measuring the rotation of mirrors that are commonly found in micro-systems. Both theoretical and experimental results show that distortion of the circular grating that is projected onto the mirror surface is a simple function of the angular rotation of the mirror. The circular grating may readily be generated using a standard Michelson interferometer or an LCD projector. Through manipulating the distance between the interferometer and the mirror surface, the diameter of the optical grating may be varied. Furthermore, the additional use of a converging lens enables a significant reduction in the size of the grating: with simple laboratory facility, small circular grating of about 400 μm is achieved for use on micro-systems. With the use of more sophisticated optical elements, the angular rotation of even smaller micro-mirrors may be measured.     

Effects of nano-carbon doping and sintering temperature on microstructure and properties of MgB2

We fabricated nano-carbon (NC) doped MgB₂ bulks using an in situ process in order to improve the critical current density (J_c) under a high magnetic field and evaluated the correlated effects of the doped carbon content and sintering temperature on the phase formation, microstructure and critical properties. MgB_2−xC_x bulks with x = 0 and 0.05 were fabricated by pressing the powder into pellets and sintering at 800 °C, 900 °C, or 1000 °C for 30 min.We observed that NC was an effective dopant for MgB₂ and that part of it was incorporated into the MgB₂ while the other part remained (undoped), which reduced the grain size. The actual C content was estimated to be 68–90% of the nominal content. The NC doped samples exhibited lower T_c values and better J_c(B) behavior than the undoped samples. The doped sample sintered at 900 °C showed the highest J_c value due to its high doping level, small amount of second phase, and fine grains. On the other hand, the J_c was decreased at a sintering temperature of 1000 °C as a result of the formation of MgB₄ phase.     

Entanglement of macroscopic test masses and the standard quantum limit in laser interferometry

We show that the generation of entanglement of two heavily macroscopic mirrors is feasible with state of the art techniques of high-precision laser interferometry. The basis of such a demonstration would be a Michelson interferometer with suspended mirrors and simultaneous homodyne detections at both interferometer output ports. We present the connection between the generation of entanglement and the standard quantum limit (SQL) for a free mass. The SQL is a well-known reference limit in operating interferometers for gravitational-wave detection and provides a measure of when macroscopic entanglement can be observed in the presence of realistic decoherence processes.     

On the possible linear term in light coincidence experiments

An attempt is made to clarify the confusion about the interpretation of an early experiment aiming to demonstrate the dual nature of light. While interferometer experiments show that photons interact with both mirrors of a Michelson interferometer, it was verified that a photon interacts with one of the detectors put in place of the mirrors. Any deviation from the effect predicted by QED would lead to a term in the coincidence rate linearly proportional to the number of photons; the absence of this term—for the light source used—is in accordance with QED. It is shown that by appropriate preparation of the light source a linear term can be obtained, but this is not in contradiction with QED.     

Thickness of SiO2 thin film on silicon wafer measured by dispersive white-light spectral interferometry

We present a white-light spectral interferometric technique for measuring the thickness of SiO₂ thin film on a silicon wafer. The technique utilizes a slightly dispersive Michelson interferometer with a cube beam splitter and a fibre-optic spectrometer to record channelled spectra in two configurations. In the first, a standard configuration with two identical metallic mirrors, the recorded channelled spectrum is fitted to the theoretical one to determine the effective thickness of the beam splitter made of BK7 optical glass. In the second configuration one of the mirrors is replaced by SiO₂ thin film on the silicon wafer and the recorded channelled spectrum is fitted to the theoretical one to determine the thin-film thickness. We consider multiple reflection within the thin-film structure, use the optical constants for all the materials involved in the set-up, and confirm very good agreement between theory and experiment. The technique is applied to four samples with various SiO₂ film thicknesses. PACS 07.60.Ly; 68.55.Jk; 78.20     

A simple method to stably float a coupled system of optics tables

We demonstrate that one may safely float a composite system of mechanically coupled heavy-duty optics tables with a stability of ±λ/10 for several months without requiring the presence of an air compressor in the building. Furthermore, we demonstrate a simple and non-disruptive method to mechanically couple two floating tables such that the two-table system has sufficient stability for most optics experiments, and describe precautions that need to be taken in order to avoid mechanical damage to the tables. We checked the stability of the coupled system by use of a Michelson interferometer that spanned across the two tables.