三维随机粗糙面上导体目标散射的解析-数值混合算法

提出三维导体目标与导体粗糙面复合散射的解析-数值混合迭代算法，推导出三维目标与粗糙面的耦合积分方程，以及粗糙面散射的Kirchhoff近似(KA)计算式.粗糙面的KA解析计算大大降低了粗糙面求解的复杂度，与目标矩量法的混合迭代保证了计算结果的精度，使得三维体-面目标复合散射计算变得可行.由于体-面两者的高阶耦合作用明显减小，保证了该混合迭代算法的收敛性.与镜像Green函数方法的比较表明该混合算法的有效性，并讨论了粗糙面长度选择对计算结果的影响.结合Monte-Carlo方法，数值分析了理想导体Gauss     

二维随机粗糙面上导体目标复合瞬态散射的混合算法

提出用时域积分方程法(TDIE)与时域基尔霍夫近似法(TDKA)的混合算法来求解二维导体随机粗糙面及其上方二维导体目标的复合瞬态散射,推导出了在TM波入射情形下显式及隐式格式的时间步进方程.将粗糙面与目标分别进行TDKA和TDIE计算,并考虑目标与粗糙面之间的耦合,对TDKA和TDIE进行混合迭代,既大大降低了粗糙面求解的复杂度,又保证了计算精度.数值算例中,考虑了角反射器(开放体)和圆柱(封闭体)两种目标,分别计算了目标表面电流响应和电场远场响应.计算结果表明,和单纯TDIE法相比,本文混合方法计算效率 关键词： 随机粗糙面 复合瞬态散射 时域积分方程法和时域基尔霍夫近似法 混合算法     

粗糙海面及其上方导体目标复合电磁散射的混合算法研究

利用基于电流计算的矩量法结合高频算法基尔霍夫近似的混合算法,分析了一维PM谱粗糙海面及其上方二维无限长任意截面导体目标的双站复合电磁散射特性.混合算法将粗糙面和目标分别划分到KA区域和MOM区域,由于无需数值求解粗糙海面区域的表面极化电流,该算法的运算时间和对计算机内存的需求主要取决于粗糙面上方目标的网格划分情况.数值结果以无限长导体圆柱为例计算了其与一维下垫PM谱粗糙海面的复合双站散射截面,并将计算结果与经典MOM结果进行了比对和验证,结果表明混合方法具有较高的计算效率.最后应用混合方法讨论了不同极化状态、海上不同风速以及目标不同尺寸和位置对复合散射截面的影响. 关键词： 粗糙海面 电磁散射 混合算法 矩量法     

随机Gauss粗糙面上三维导体目标散射差场的随机泛函解析计算方法

提出一种解析的随机泛函方法(SFA),计算导体Gauss粗糙面上三维导体目标的复合电磁散射.推导粗糙面的随机Green函数,用一种新的四路径模型描述面体复合散射机理,用SFA求解双站差场雷达散射截面.以导体球目标为算例,与其他数值计算方法比较后验证了SFA的有效性与准确性,同时讨论了粗糙度、体目标尺寸以及距离粗糙面高度等参量变化对结果的影响,给出复杂形状体目标的双站差场雷达散射截面的空间角分布. 关键词： 随机泛函方法 粗糙面随机Green函数 差场雷达散射截面 面体复合散射     

三维目标与粗糙面复合散射的广义稀疏矩阵平面迭代及规范网格算法

提出了快速计算二维导体粗糙面与面上金属目标复合散射的广义稀疏矩阵平面迭代及规范网格法(G-SMFSIA/CAG).推导了二维导体粗糙面与面上目标相互作用的耦合积分方程,用稀疏矩阵平面迭代及规范网格法(SMFSIA/CAG)求解粗糙面部分的表面积分方程,而用基于RWG基函数的矩量法(MOM)计算目标部分的表面积分方程,并通过更新方程的激励项迭代求解目标与粗糙面的相互耦合作用.结合Monte-Carlo方法产生具有PM(Pierson-Moskowitz)海浪谱的随机海洋粗糙面,数值分析了海面上不同形状导体目 关键词： 复合散射 广义稀疏矩阵平面迭代及规范网格法 随机海洋粗糙面 双站散射系数     

随机起伏冰面三维声散射的Kirchhoff近似数值计算模型

针对随机起伏冰面的声散射问题,建立了随机起伏冰面三维声散射的Kirchhoff近似数值计算模型。利用Delaunay三角剖分方法对随机起伏冰面进行三角面元剖分,然后采用Z-buffer算法进行面元的遮挡消隐,得到处于声波照射亮区的面元,最后采用Gordon面元积分的板块元方法计算得到随机起伏冰面的散射强度。数值计算模型中,将冰面认为是局部阻抗表面,直接代入起伏冰面局部反射系数进行散射声场的计算,避免了解析计算模型中对反射系数的近似处理。对比分析了数值和解析计算模型在小粗糙起伏冰面、大粗糙起伏冰面及不同声波入射角和不同声波频率时的散射强度。相比解析模型计算结果,数值模型计算结果与实测结果更吻合。      

分形分层粗糙面电磁波透射特性的混合算法

运用基于矩量法(method of moment,MoM)结合基尔霍夫近似(Kirchhoff approximation,KA)的混合算法研究一维带限Weierstrass分形分层介质粗糙面的电磁波透射问题.在混合算法中将上层粗糙面和下层粗糙面分别划分到MoM区域和KA区域,数值计算得到透射系数随透射波的散射角的变化,讨论粗糙面分维数、高度起伏均方根、底层介质介电常数、中间层介质介电常数和厚度、入射波频率对透射系数的影响,结果表明上层粗糙面参数对透射系数有显著影响,而下层粗糙面参数对透射系数影响较小.     

粗糙面重构问题的混合算法研究

基于Desanto的谱表示法,采用数值和近似算法相结合的混合算法对一维粗糙面的重构问题进行了研究.对于正问题,采用数值算法——矩量法(MOM)得到一维粗糙面的相关散射数据,对于逆问题,考虑不同粗糙度的粗糙面,分别采用两种近似算法——微扰近似(SPA)、基尔霍夫近似(KA)与矩量法的混合算法,对粗糙面轮廓进行了重构;数值结果以高斯粗糙面为例,给出了混合算法对不同粗糙度粗糙面的重构算例,并进行了数据比较和分析. 关键词： 粗糙面重构 矩量法 微扰近似 基尔霍夫近似     

粗糙海面与其上方多目标复合散射的混合算法

针对粗糙海面与其上方多目标复合的情形,常用算法存在计算量过大、计算时间太长等缺点,本文采用基尔霍夫近似法与矩量法结合的混合算法可以大大简化计算量、节省时间.本文首先通过蒙特卡罗的方法模拟一维PM粗糙海面,并与粗糙海面上方多目标建立复合模型;然后对矩量法结合基尔霍夫近似法的混合算法做了详细的公式推导,得到了复合散射系数,并且分析了不同入射角、目标高度、目标间距、目标尺寸、风速等参数对复合电磁散射特性的影响.实验结果表明,针对粗糙海面与其上方多目标复合的情形,采用矩量法结合基尔霍夫近似法的混合算法不但可以保证准确性,而且可以大幅度减少计算所用时间(混合算法用时占矩量法的19%),对大尺寸粗糙面和复杂的复合模型优势尤为明显.     

二维导体微粗糙面与其上方金属平板的复合电磁散射研究

研究了二维导体微粗糙面与其上方金属平板复合电磁散射特征.应用互易性原理使求解二次散射场简化为求解包含平板上的极化电流和微粗糙面散射场的积分方程，从而降低了求解难度.应用物理光学近似和微扰法分别求解了平板上的极化电流和粗糙面的电磁散射场，得到了复合散射截面计算公式并进行了数值计算.尤其对该复合模型后向耦合电磁散射结果进行了详细分析和讨论. 关键词： 互易性原理 复合电磁散射 微粗糙面 平板     

Investigation on scattering from a plasma-coated target over a rough sea surface using a multi-hybrid method

An iterative strategy combining the Kirchhoff approximation (KA) with the hybrid finite element–boundary integral (FE-BI) method is presented to consider electromagnetic scattering from a coated target above a rough sea surface. The multi-hybrid method considers the multiple-scattering interactions between target and underlying surface based on equivalent principle and currents updating scheme. The hybrid FE-BI-KA method, which is an improved and generalized version of a previous KA–Method of Moments (MoM) technique, can deal with an inhomogeneous target. Numerical results are given to evaluate the validity of the multi-hybrid technique, and then the hybrid method is employed to investigate electromagnetic scattering from a plasma-coated airfoil above a rough sea surface, including the effects of several key parameters on stealth performance, such as plasma angular frequency and electron collision frequency.     

Hybrid method for investigation of electromagnetic scattering from conducting target above the randomly rough surface

A current based hybrid method (HM) is proposed which combines the method of moment (MOM) with the Kirchhoff approximation (KA) for the analysis of scattering interaction between a two-dimensional (2D) infinitely long conducting target with arbitrary cross section and a one-dimensional (1D) Gaussian rough surface. The electromagnetic scattering region in the HM is split into KA region and MOM region. The electric field integral equation (EFIE) in MOM region (target) is derived, the computational time of the HM depends mainly on the number of unknowns of the target. The bistatic scattering coefficient for the infinitely long cylinder above the rough surface with Gaussian roughness spectrum is calculated, and the numerical results are compared and verified with those obtained by the conventional MOM, which shows the high efficiency of the HM. Finally, the influence of the size, location of the target, the rms height and correlation length of the rough surface on the bistatic scattering coefficient with different polarizations is discussed in detail.     

时域混合算法在一维海面与舰船目标复合电磁散射中的应用

采用时域积分方程(TDIE)与时域基尔霍夫近似(TDKA)的混合算法研究粗糙海面与舰船目标的复合瞬态电磁散射.该方法将舰船目标及其近邻海面划分为TDIE区域,用TDIE方法精确求解;将剩余电大尺寸的粗糙海面划分为TDKA区域,采用高效的TDKA电流近似求解.通过混合算法和传统TDIE算法结果的对比,表明TDIE-TDKA混合算法能保证计算的精度,同时具有较高的计算效率.最后,讨论了海面上方有无目标、海面上方风速、电磁脉冲入射角、舰船目标尺寸、吃水深度对后向散射磁场的影响.     

Fast iterative approach to the difference scattering from a dielectric target above a rough surface

The difference field RCS (d-RCS) has been defined to analyze the scattering from the target above a rough surface. The electric field integral equations (EFIEs) of the difference induced currentJ _sd on the rough surface, the induced electric currentJ _o and magnetic currentK _o on the dielectric target under a TE wave incidence are derived. A small portion of the rough surface towards the target along the specular direction is taken to compute the scattering contributionE _s0 from the rough surface towards the target, which improves the computation speed. A numerical iterative approach is developed to solve the EFIEs and bistatic d-RCS. The surface length for iterations is dependent on the scattering angle and discussed for comparison with Johnson’s method. Using the Monte-Carlo method to generate the Pierson-Morkowitz (P-M) ocean-like rough surface, bistatic d-RCS of the dielectric target, e.g. a cylinder or a square column, above the rough surface is numerically simulated. The induced electric and magnetic currents on the dielectric target and the difference induced current on the rough surface are numerically discussed.     

Fast iterative approach to the difference scattering from a dielectric target above a rough surface

1 Introduction Electromagnetic scattering from the target above or beneath a rough surface has at- tracted much interest during recent years, because of extensive applications to radar surveillance, target detection, ground radar probing, and so on[1―3]. In order to numeri- cally simulate scattering from composite model of the target and underlying rough sur- face, some fast numerical methods, such as general forward backward method and spec- trum acceleration algorithm (GFBM/SAA)[4,5], fin…     

有限元/边界积分方法在海面及其上方弹体目标电磁散射中的应用

本文将有限元/边界积分方法(FE/BIM)结合区域分解方法引入到粗糙海面及其上方目标 的电磁散射问题的研究中. 由于积分边界可以以任意形状设置在距模型表面任意远的距离处, 故本文采用共形人工边界结合区域分解建模方法截断模型的开放计算区域以减少求解未知量, 在截断区域内部采用有限元方法求解, 而计算区域的边界条件通过边界积分方程方法得到. 通过与矩量法获得的数值计算结果进行比较, 证明了该混合算法及模型处理方法的正确性, 进而研究了海面上方弹体目标的电磁散射特性, 并讨论了其双站散射系数随电磁波入射角度、目标高度、海面风速以及弹体尺寸的电磁散射特性变化情况. 本文结果可用于反演复杂背景下的目标信息及目标探测等领域. 关键词： 电磁散射 粗糙海面 目标 有限元/边界积分方法     

Application of a multiregion model to the EM scattering from a rough surface with or without a target above it

An efficient multiregion model is introduced to calculate the electromagnetic scattering from a perfectly electrical conducting(PEC) rough surface with or without a PEC target above it.In the multiregion model,the rough surface is split into multiple regions depending on their position along the rough surface.Two intermediate regions are chosen as the dominant region.If a target is located above the rough surface,the target will also be included in the dominant region.The method of moments(MOM) is only adopted on the dominant region to ensure validity.Hence,the new model can greatly reduce the number of unknowns associated with full MOM analysis.The induced electric currents on the other regions are obtained by approximately considering the mutual coupling between different regions along the rough surface.Compared with the published hybrid method,this new model is not only suitable for EM scattering from a target above a rough surface but also applicable for just rough surfaces.Several numerical simulations are presented to show the validity and efficiency of the multiregion model.