考虑界面状况时柱状弹性固体的声波散射

导出了求解母材料固体中镶嵌的柱状弹性固体(两固体间存在界面薄层)声波散射系数的一般表达式.根据Flax的共振散射理论,对背向散射谱中的共振模式进行了识别.利用模拟界面薄层的弹簧模型,考察了界面层切向劲度常数K_T对共振模式形态的影响 关键词： 声波散射 共振模式 界面     

横向各向同性柱状复合结构对超声波的散射

首先描述了横向各向同性复合圆柱结构的入射声场、散射声场及内部的驻波声场，然后利用转移矩阵方法导出了求解散射声场的方程组，计算了铝／各向异性界面层／纤维复合结构对斜入射声波的背向散射谱和散射截面积。将柱状复合结构中各向异性界面薄层相应的转移矩阵作渐近展开，建立了模拟这种界面薄层的弹簧模型及界面处广义边界条件。结果表明，模型中劲度常数仅依赖于界面薄层厚度及界面层媒质的弹性常数Ｃｌｌ，Ｃ１２和Ｃ４４，而振子质量与Ｃｌｌ，Ｃ４４，Ｃ１３和Ｃ３３有关。     

具有刚性联接界面和滑移界面的层状固体媒质的声反射

利用矩阵方法,本文提出了声波从具有刚性联接和滑移界面的层状固体媒质反射特性的一般模型,导出了包含一个或两个滑移界面的层状固体媒质纵波和横波声反射系数解析表达式。文中还给出一些典型粘接件声反射系数的数值计算结果,为正确选择超声评价这些界面特性所采用的技术参数提供了依据。     

固-固界面退化特性的超声反射评价方法

提出了一种基于有限宽超声束反射的固-固界面退化特性评价方法,从理论和数值仿真角度进行了分析和计算。将两固体界面间的薄层简化为界面弹簧模型,以界面法向和切向劲度系数表征界面的退化程度。通过数值计算求得有限宽超声纵波束在不同入射角和界面不同退化程度下的反射横波、反射纵波的镜面反射系数。进一步地,通过建立二维有限元模型,仿真研究了有限宽超声纵波束在给定入射角及界面不同退化程度下镜面反射系数的变化规律。结果表明,反射纵波和反射横波的镜面反射系数随有限宽超声纵波束的入射角及界面劲度系数的改变而变化,且存在镜面反射系数随界面劲度系数单调且敏感变化的入射角,据此可准确评价界面的退化程度。     

层状各向异性固体媒质的声反射和声透射

本文导出了联系任意对称的各向异性固体层上下界面力学量（位移和应力）的传递矩阵，从而提出了层状固体媒质声反射和声透射的一般模型，作为例子，本文数值计算了金属铝中双层正交对称固体（其间界面呈刚性联接或滑移联接）对声波的反射和透射系数。     

固体滑移界面的超声评价

为评价固体滑移界面的特性,根据QSM界面模型和粘滞流体的本构方程导出了滑移界面的界面劲度系数及垂直入射到固体滑移界面的超声纵波和SH波的反射系数公式,其中纵波的反射系数与滑移界面层的绝热体积弹性模量、粘滞系数和入射声波的频率有关,而SH波的反射系数与界面层的绝热体积弹性模量和入射波的频率无关。因此,可以用SH波直接评价界面的不同粘滞状态,且不受检测频率的限制。要评价界面的绝热体积弹性模量,则必须增加纵波检测。利用蜂蜜和水模拟不同滑移界面层的声波反射实验验证了上述理论结果。     

纤维增强复合媒质中的超声散射

为了用超声方法评价纤维增强复合媒质中纤维／母材的界面特性，本文建立了三层柱状固体媒质声散射截面积和纤维增强复合媒质中声衰减的计算方法。当纤维／母材界面层厚度与波长相比很小时，用两个劲度常数描述纤维与母材之间力学量的边界条件，得到了计算纤维增强媒质中声衰减的简化模型。本文还从数值上计算了纤维／铝复合媒质中超声纵波衰减与界面特性、超声频率的关系。     

柱状固体复合结构对斜入射超声波的散射

较详细阐述了三层柱状固体复合结构对斜入射超声波的散射理论．厚度远小于声波波长和内层半径的中间圆环可模拟为内外层媒质之间的界面薄层．将声波斜入射时中间国环层力学量的传递矩阵作线性近似展开，我们首次建立了描述界面薄层的三维弹簧物理模型，由此进一步分析了固体界面处的声学边界条件．利用弹簧模型，我们最后从数值上研究了玻璃纤维／铝基复合结构中界面薄层力学参量的变化对斜入射超声散射截面积的影响．     

界面层对层状各向异性复合结构中Lamb波的影响

建立了各向异性界面层的弹簧模型,并将其应用于分析层状复合媒质的全局矩阵技术中.其 引入的机理是全局矩阵的程序结构、各层矩阵的排列不至于遭受大的破坏.因此,把弹簧界 面作为一个“材料层”.该层的材料常数用劲度常数来描述,其层厚为零.把该层放在全局矩 阵适当的位置而使系统中的其他层不发生任何变化.数值示例显示了刚性联接、滑移联接、 完全脱层三种不同界面条件下双层各向异性复合结构中Lamb波的频散特征,并对刚性联接和 滑移联接时质点沿板厚方向的位移分布进行了比较. 关键词： 各向异性界面 弹簧模型 全局矩阵 兰姆波频散     

凹面相控阵聚焦声场在液固界面上的反射和折射

开展了凹面线性相控阵列辐射声场在液固界面上的反射和折射特性研究,利用射线近似方法,得到了凹面相控阵聚焦声场在液固界面上反射和折射后的声场渐近解析表达式,对声波在液固曲面上的反射和折射声场进行了分析和讨论. 利用这个解析表达式,对凹面线性聚焦声场在液固平界面和液固圆柱界面情况下固体中折射纵波和折射横波的相控阵声场进行了分析和讨论,发现凹面线阵声场在液固圆柱界面下比液固平界面具有更好的聚焦效果. 关键词： 凹面阵列 超声相控阵 反射与折射     

Evaluation of interface wave velocity, reflection coefficients and interfacial stiffnesses of contacting surfaces

The phase velocity of the antisymmetric-mode interface wave as well as the longitudinal and shear wave reflection coefficients have been measured for contacting poly(methyl methacrylate) (PMMA) surfaces subjected to different contact pressures. It has been found that while the reflection coefficients decrease as the contact pressure is increased, the phase velocity of the interface wave increases from that of the Rayleigh wave toward that of the bulk shear wave. From these measurements, the normal and tangential interfacial stiffnesses of the contacting PMMA surfaces have been evaluated as functions of the contact pressure. As a result, the two independent procedures to evaluate the tangential stiffness, namely, from the interface wave velocity and from the shear wave reflection measurements, have yielded mutually consistent results. Furthermore, it has been found that the tangential/normal stiffness ratio and the shear/longitudinal reflection ratio of the contact interface are consistent with the predictions of an existing theoretical model for kissing bond interfaces.     

Harmonic generation of an obliquely incident ultrasonic wave in solid-solid contact interfaces

The conventional acoustic nonlinear technique to evaluate the contact acoustic nonlinearity (CAN) at solid-solid contact interfaces (e.g., closed cracks), which uses the through-transmission of normally incident bulk waves, is limited in that access to both the inner and outer surfaces of structures for attaching pulsing and receiving transducers is difficult. The angle beam incidence and reflection technique, where both the pulsing and receiving transducers are located on the same side of the target, may allow the above problem to be overcome. However, in the angle incidence technique, mode-conversion at the contact interfaces as well as the normal and tangential interface stiffness should be taken into account. Based on the linear and nonlinear contact stiffness, we propose a theoretical model for the reflection of an ultrasonic wave angularly incident on contact interfaces. In addition, the magnitude of the CAN-induced second harmonic wave in the reflected ultrasonic wave is predicted. Experimental results obtained for the contact interfaces of A16061-T6 alloy specimens at various loading pressures showed good agreement with theoretical predictions. Such agreement proves the validity of the suggested oblique incidence model.     

粗糙接触界面超声非线性效应的概率模型

提出描述粗糙接触界面超声非线性效应的概率模型,利用分段均匀概率函数描述粗糙接触界面劲度系数变化,结合表面粗糙峰的几何分布特征,得到界面粗糙度和两侧表面相对运动对声波的非线性调制作用。实验观测了铝合金材料的粗糙接触界面的高次谐波现象和阈值现象,进一步分析了归一化非线性参数与界面加载压力、粗糙度之间的关系。实验测量结果与概率模型的理论预测一致,证明了该模型的正确性,为利用超声非线性效应评价粗糙接触界面提供了理论依据。      

光轴方向任意的晶体连续双折射双反射

根据惠更斯定理,研究了单轴晶体光轴任意方向的双折射与全内双反射,给出了光线方向和光波法线方向的普遍公式.讨论了在晶体内沿多个面的连续双折射双反射,分析了前一界面输出量和后一界面输入量之间的联系,得到多次双折射双反射后的光线方向和光波法线方向.在此基础上,适当地选取晶体的界面参数,相当于选取光轴方向,可以使o光和e光的分离角Δoe更大.光轴方向任意的晶体连续双折射双反射对晶体器件的最优化设计非常有帮助.最后给出了改变斜入射2×2电光开关的出射面参数使Δoe优化的实例.     

Magneto-optical effects in crystals at the normal incidence

We consider the interaction of a polarized electromagnetic wave in a magnetically ordered crystal plate surrounded by an isotropic ambient at the normal incidence. The crystalline medium of the plate is specified by the general non-symmetric permittivity tensor. The results are expressed in terms of the transmission and reflection matrices which relate the electric fields of the incident wave to those of transmitted and reflected waves. Their applications are illustrated by examples of an isotropic plate magnetized normal to the interface, a cubic crystal magnetized parallel to the interface and an orthorhombic crystal magnetized along the axis normal to the interface. The effect of the reflection from the interfaces and the interference effect are included. The paper treats the reflection at an interface between an isotropic ambient and an absorbing magnetic crystal at small non-zero angles of incidence. The general reflection matrix is applied to the determination of the magneto-optical effects quadratic in magnetization.     

Phonon scattering at siliconcrystal surfaces

Our observations of the reflection or backscattering of high-frequency phonons (v =280 GHz to 1 THz) at silicon-solid interfaces disagree significantly with predictions from the acoustic mismatch model. Interfaces composed of materials theoretically wellmatched, show high scattering experimentally. In contrast, interfaces theoretically poorly matched, show less phonon scattering than expected. Generally, this is best expressed by the fact that the interface scattering ranges from roughly 30–60% for different phonon modes with little dependence on the material covering the silicon crystal and different techniques of interface preparations. Thus, our experiments indicate that the well-known Kapitza anomaly of the phonon scattering at solid-liquid helium interfaces is not a special case; the same anomaly appears to be present at all tested interfaces. Our experiments are compared with detailed calculations which either assume pure specular or pure diffusive scattering. In these calculations the influence of the crystal anisotropy for the phonon propagation (phonon focussing) is included. This comparison shows, especially for the free silicon surface, that phonons are completely diffuse scattered. Hence, the acoustic mismatched model relying on specular reflection cannot be applied to the real silicon interface. The frequency dependence of phonon scattering at a free silicon interface indicates the existence of at least two different diffusive scattering mechanisms. Within our experimental limits in these two scattering processes the phonons are elastically scattered.     

Effect of reflecting modes on combined heat transfer within an anisotropic scattering slab

Under various interface reflecting modes, different transient thermal responses will occur in the media. Combined radiative-conductive heat transfer is investigated within a participating, anisotropic scattering gray planar slab. The two interfaces of the slab are considered to be diffuse and semitransparent. Using the ray tracing method, an anisotropic scattering radiative transfer model for diffuse reflection at boundaries is set up, and with the help of direct radiative transfer coefficients, corresponding radiative transfer coefficients (RTCs) are deduced. RTCs are used to calculate the radiative source term in energy equation. Transient energy equation is solved by the full implicit control-volume method under the external radiative-convective boundary conditions. The influences of two reflecting modes including both specular reflection and diffuse reflection on transient temperature fields and steady heat flux are examined. According to numerical results obtained in this paper, it is found that there exits great difference in thermal behavior between slabs with diffuse interfaces and that with specular interfaces for slabs with big refractive index.     

样品内部非平行界面的反射式terahertz波层析研究

已有的反射式terahertz(THz)波层析研究都是针对平行界面进行，开展了样品内非平行界面的反射式THz波层析成像的数值模拟研究.根据物理模型给出了重构算法，并编制了相应的重构软件，数值计算结果表明非平行界面的重构是可行的.分析表明，重构误差主要来源于计算中的近似处理和累积误差.讨论了曲线轮廓界面的近似处理方法，提出当曲线轮廓各点的曲率半径都比较大时，可以把曲线分割成多段直线处理.最后分析了影响纵向分辨率的因素.结果表明，输入脉冲的脉宽越大则纵向分辨率越低，一般情况下纵向分辨率可达到亚毫米量级. 关键词： terahertz波 反射式层析成像     

晶体的连续双折射双反射及其集成应用:1×N电光开关

根据惠更斯定理 ,给出了单轴晶体内双折射与全内双反射的光线方向和光波法线方向的普遍公式。并讨论了在晶体内沿多个面的连续双折射双反射 ,分析了前一界面输出量和后一界面输入量之间的联系 ,得到多次双折射双反射后的光线方向和光波法线方向。在此基础上 ,提出一种单块晶体集成的 1×N电光开关 ,即把多个电光调制器安置在全反射面之间。由于双折射效应 ,寻常光和非常光有不同的全内反射 ;给不同的电极对上加上半波电压改变输入光的偏振状态 ,再使光通过不同数目的反射面反射 ,最后输出光就有不同的角度。具有结构简单、插入损耗小、抗干扰性强等优点。给出了 1× 4光开关的实例。