Dy3+/Nd3+掺杂对Sr4Al14O25:Eu2+陷阱能级的影响

采用高温固相法合成了Sr₄Al₁₄O₂₅: Eu²⁺,Sr₄Al₁₄O₂₅: Eu²⁺,Dy³⁺和Sr₄Al₁₄O₂₅: Eu²⁺,Nd³⁺材料,研究了Dy³⁺或Nd     

Eu2+, Cr3+共掺杂的MAl12O19 (M=Ca, Sr, Ba) 的发光性质及能量传递

三基色荧光粉中, 红色荧光粉性能较差, 为获得性能优良的红色荧光粉, 本文采用高温固相法合成了Eu²⁺, Cr³⁺单掺杂及共掺杂的碱土金属多铝酸盐MAl₁₂O₁₉ (M =Ca, Sr, Ba) 发光体. 实验表明, 在以上三种基质中均存在Eu²⁺→Cr³⁺的能量传递, 利用能量传递可以有效将Eu²⁺的蓝光或绿光转换为红光. 三种碱土金属多铝酸盐基质的晶体结构相似,但Eu²⁺, Cr³⁺发光受晶体场影响,导致在不同的基质中Eu²⁺, Cr³⁺间能量传递效率不同.通过光谱分析及能量传递效率计算发现, 相同掺杂浓度下,CaAl₁₂O₁₉中Eu²⁺→Cr³⁺的能量传递效率最高,SrAl₁₂O₁₉次之, BaAl₁₂O₁₉最低.红光转换率在CaAl₁₂O₁₉中最高.     

Eu2+,Mn2+在BaZnP2O7中的发光及Eu2+→Mn2+能量传递

采用高温固相法合成了BaZnP₂O₇:Eu²⁺,Mn²⁺荧光粉，并对其发光性质及Eu²⁺对Mn²⁺的能量传递机理进行了研究.Eu²⁺和Mn²⁺在380 nm和670nm的发射峰分别由Eu²⁺的5d—4f跃迁和Mn²⁺的⁴T₁(^{4相似文献}   

节能灯用BaMgAl10O17:Eu2+,Mn2+荧光粉的劣化机理研究

对节能灯用BaMgAl₁₀O₁₇: Eu²⁺,Mn²⁺荧光粉的热劣化和紫外辐照劣化机理进行了对比研究. 发现热处理和紫外辐照处理均对BaMgAl₁₀O₁₇: Eu²⁺,Mn²⁺产生明显的发光劣化作用. 研究结果表明：热劣化主要涉及到Eu²⁺ 的氧化及其格位偏移, 而紫外辐照劣化与上述过程无关. 紫外辐照劣化主要源自高能紫外辐照使Eu²⁺ 处于更加不稳定的状态, 从而降低Eu²⁺ 的直接吸收和发射强度.     

红宝石Cr3+:Al2O3的电子云延伸效应及压力对电子云延伸效应影响(英文)

本文以Cr³⁺自由离子的3d电子径向波函数为基础,对Cr³⁺:Al₂O₃中的电子云延伸效应进行了理论研究,引入了电子云延伸效应系数κ,得到了Cr³⁺:Al₂O₃中Cr³⁺离子的最优化3d电子径向波函数.并研究了压力对电子云延伸效应系数κ的影响.     

新型光存储材料Sr2SnO4: Tb3+, Li+ 的合成及其红外上转换光激励发光性能的研究

采用高温固相法获得了一种只具有 微弱余辉的新型电子俘获型光存储材料Sr₂SnO₄:Tb^{3 +}, Li ⁺. 发光性能研究结果表明: 该材料对980 nm的红外激光具有很好的上转换光激励信息读出响应, 同时292 nm紫外光为其最佳信息写入光源. 光存储性能研究结果表明: 该材料的浅陷阱较少, 因此其余辉发光很弱, 不到500 s; 另一方面, 该材料中存在大量的深蓄能陷阱. 因此, Sr₂SnO₄: Tb^{3 +}, Li⁺是一种具有较好实际应用价值的新型电子俘获型光存储材料. 此外, 还讨论了Sr₂SnO₄: Tb^{3 +}, Li⁺的光存储发光机理.     

Tm3+/Yb3+共掺氧卤碲酸盐玻璃上转换发光研究

研究了Tm³⁺/Yb³⁺共掺氧卤碲酸盐玻璃的上转换发光光谱，分析了Tm₂O₃含量对Tm³⁺/Yb³⁺共掺氧卤碲酸盐玻璃上转换发光的影响机理.结果表明：在Tm³⁺/Yb³⁺共掺氧卤碲酸盐玻璃的上转换发光中，Tm³⁺存在较强的浓度猝灭效应.随Tm₂O₃含量增加，Tm³⁺的上转换蓝光和红光强度先增加，后降低，在0.1mol% Tm₂O₃达到最大.该结果有助于进一步提高Tm³⁺的上转换发光效率.     

用于白光LED的单一基质白光荧光粉Ca2SiO3Cl2:Eu2+，Mn2+的发光性质

用高温固相法合成了Eu²⁺，Mn²⁺共激活的Ca₂SiO₃Cl₂高亮度白色发光材料，并对其发光性质进行了研究. 该荧光粉在近紫外光激发下发出强的白色荧光，Eu^{2+中心形成峰值为419 nm和498 nm的特征宽带，通过Eu2+中心向Mn2+中心的能量传递导致了峰值为578 nm的发射，三个谱带叠加从而在单一基质中得到了白光. 激发光谱均分布在250—415 nm的波长范围，红绿蓝三个发射带的激发谱峰值分别位于385 nm，412 nm，370 nm和396 nm处，可以被InGaN管芯产生的紫外辐射有效激发. Ca₂SiO₃Cl₂:Eu2+，Mn2+是一种很有前途的单一基质白光LED荧光粉.}     

Mn4+掺杂对BiFeO3陶瓷微观结构和电学性能的影响研究

利用传统的固相反应法制备了BiFe_1-xMn_xO₃ (x= 0-0.20)陶瓷样品, 研究了不同Mn⁴⁺掺杂量对BiFeO₃陶瓷密度、物相结构、显微形貌、 介电性能和铁电性能的影响.实验结果表明:所制备的BiFe_1-xMn_xO₃ 陶瓷样品的钙钛矿主相均已形成,具有良好的晶体结构, 且在掺杂量x=0.05附近开始出现结构相变.随着Mn⁴⁺添加量的增加, 体系的相结构有从菱方钙钛矿向斜方转变的趋势,且样品电容率大幅度增大, 而介电损耗也略有增加;在测试频率为10⁴ Hz条件下, BiFe_0.85Mn_0.15O₃ (ε_r=1065)的 ε_r是纯BiFeO₃ (ε_r=50.6)的22倍; 掺杂后样品的铁电极化性能均有不同程度的提高,可能是由于Mn⁴⁺稳定性优于 Fe³⁺,高价位Mn⁴⁺进行B位替代改性BiFeO₃陶瓷, 能减少Bi³⁺挥发,抑制Fe³⁺价态波动,从而降低氧空位浓度,减小样品的电导和漏电流.     

Er3+/Ce3+共掺碲铋酸盐玻璃的制备及光谱特性提高研究

采用高温熔融退火法制备了系列 80TeO₂-10Bi₂O₃-10TiO₂-0.5Er₂O₃-xCe₂O₃ (x=0,0.25, 0.5,0.75,1.0 mol%)和(80-y) TeO₂-10Bi₂O₃-10TiO₂-yWO₃-0.5Er₂O₃-0.75Ce₂O₃ (y=3,6,9,12 mol%)的碲铋酸盐玻璃.测试了玻璃样品400-1700 nm范围内的吸收光谱, 975 nm抽运下的上转换发光谱和1.53 μm波段荧光谱, 以及808 nm激励下的Er³⁺离子荧光寿命和无掺杂玻璃样品的Raman光谱, 并结合Judd-Ofelt理论和McCumber理论计算了Er³⁺离子光谱参数.结果表明, 在掺Er³⁺碲铋酸盐玻璃中引入Ce³⁺离子进行Er³⁺/Ce³⁺共掺, 通过Er³⁺离子⁴I_11/2能级与Ce³⁺离子²F_5/2 能级间基于声子辅助的能量传递过程,可以有效抑制Er³⁺离子上转换发光并明显增强其 1.53 μm波段荧光;同时,在现有Er³⁺/Ce³⁺共掺玻璃组分基础上引入WO₃, 可进一步提高1.53 μm波段荧光并展宽其荧光发射谱. 研究结果对于获取优异光谱特性的宽带掺Er³⁺光纤放大器玻璃基质具有实际意义.     

Synthesis and characterization of Sr3Al2O6：Eu2＋, Dy3＋ phosphors prepared by sol-gel-combustion processing

A type of red luminescent Sr3Al2O6:Eu2+, Dy3+ phosphor powder is synthesised by sol-gel-combustion processing, with metal nitrates used as the source of metal ions and citric acid as a chelating agent of metal ions. By tracing the formation process of the sol-gel, it is found that it is necessary to reduce the amount of NO3- by dropping ethanol into the solution for forming a stable and homogeneous sol-gel. Thermogravimetric and Differential Scanning Calorimeter Analysis, x-ray diffractionmeter, scanning electron microscopy and photoluminescence spectroscopy are used to investigate the luminescent properties of the as-synthesised Sr3Al2O6:Eu2+, Dy3+. The results reveal that the Sr3Al2O6 crystallises completely when the combustion ash is sintered at 1250 C. The excitation and the emission spectra indicate that the excitation broadband lies mainly in a visible range and the phosphors emit a strong light at 618 nm under the excitation of 472 nm. The afterglow of (Sr0.94Eu0.03Dy0.03)3Al2O6 phosphors sintered at 1250 ℃ lasts for over 1000 s when the excited source is cut off.     

Dy含量对红色长余辉发光材料Sr3Al2Ｏ6:Eu2＋,Dy3＋性能的影响

采用溶胶凝胶法制备了Sr₃Al₂Ｏ₆:Eu^2＋,Dy^3＋红色长余辉发光材料,利用X射线衍射仪对材料的物相进行了分析,结果表明,1200℃下制备的样品的物相为Sr₃Al₂Ｏ₆,少量的Eu和Dy掺杂没有影响样品的相组成.采用荧光分光光度计、照度计测定了样品的发光特性.结果表明Sr₃Al₂Ｏ关键词： 红色长余辉 3Al₂Ｏ₆')" href="#">Sr₃Al₂Ｏ₆ 溶胶凝胶法     

Synthesis and Sm/Sm doping effects on photoluminescence properties of Sr4Al14O25

Complete and partial samarium reduction was achieved under strong reducing atmosphere by solid-state and combustion synthesis of Sr_3.96Sm_0.04Al₁₄O₂₅. Dependence of different fluxing agents on the formation of various strontium aluminates was examined. The samples were investigated by X-ray powder diffraction, temperature dependent luminescence decay and photoluminescence measurements. Excitation with UV radiation resulted in sharp and well resolved emission lines of samarium ions. Distinct temperature behavior for Sm²⁺ and Sm³⁺ were detected in the range of 100-500 K. Estimated emission thermal quenching values (TQ_1/2) for divalent samarium were approximately 270 K while for trivalent state around 660 K. Measured luminescence decay values of Sm²⁺ are substantially lower than for Sm³⁺,≈1.7 and ≈2.7 ms, respectively. The spectral feature of Sm²⁺ emission spectrum indicates that dopant occupies low symmetry site in Sr₄Al₁₄O₂₅ compound.     

Mn, Cr-co-doped MgAl2O4 phosphors for white LEDs

The Mn-, Cr-doped and Mn, Cr-co-doped MgAl₂O₄ powders have been synthesized via a gel-solid reaction method. Energy transfer from Mn²⁺ to Cr³⁺ has been observed for the first time in the co-doped MgAl₂O₄ phosphors. When excited with blue light with a wavelength of 450 nm at room temperature, both green emission from Mn²⁺ around 520 nm and red emission from Cr³⁺ around 675and 693 nm were generated. Moreover, the color of the emission can be modified by controlling the doping concentrations of Mn²⁺ and Cr³⁺. Therefore, MgAl₂O₄: Mn²⁺, Cr³⁺ could be used as a single-phased phosphor for white LED with a blue LED chip. The energy transfer in terms of Mn²⁺ to Cr³⁺ is determined by means of radiation and reabsorption.     

Photoluminescence and afterglow behavior of Eu, Dy and Eu, Dy in Sr3Al2O6 matrix

This paper reports the photoluminescence and afterglow behavior of Eu²⁺ and Eu³⁺ in Sr₃Al₂O₆ matrix co-doped with Dy³⁺. The samples containing Eu²⁺ and Eu³⁺ were prepared via solid-state reaction. X-ray diffraction (XRD), photo luminescent spectroscope (PLS) and thermal luminescent spectroscope (TLS) were employed to characterize the phosphors. The comparison between the emission spectra revealed that Sr₃Al₂O₆ phosphors doped with Eu²⁺, Dy³⁺ and Eu³⁺, Dy³⁺ showed different photoluminescence. The phosphor doped with Eu³⁺, Dy³⁺ showed an intrinsic f-f transition generated from Eu³⁺, with two significant emissions at 591 and 610 nm. However, the phosphor doped with Eu²⁺, Dy³⁺ revealed a broad d-f emission centering around 512 nm. After the UV source was turned off, Eu²⁺, Dy³⁺ activated Sr₃Al₂O₆ phosphor showed excellent afterglow while Eu³⁺, Dy³⁺ activated phosphor almost showed no afterglow. Thermal simulated luminescence study indicated that the persistent afterglow of Sr₃Al₂O₆: Eu²⁺, Dy³⁺ phosphor was generated by suitable electron traps formed by the co-doped rare-earth ions (Dy³⁺) within the host.     

Cr4+在Al2O3多晶体中的光谱性能研究

采用传统无压烧结工艺制备Cr:Al₂O₃透明多晶陶瓷.测定了其退火前后的吸收光谱和荧光光谱，发现在Al₂O₃六配位的八面体结构中，Cr⁴⁺的荧光发射也处在1100—1600nm波段的红外区间，荧光发射峰位于1223nm附近，类似Cr⁴⁺在四面体中的发光行为.同时由于氧化铝晶格常数较小，晶体场强较强，使Cr⁴⁺:Al₂O_{3< 关键词： 4+')" href="#">Cr⁴⁺ 2}O₃透明陶瓷')" href="#">Cr:Al₂O₃透明陶瓷 光谱性质 八面体     

Orange emission enhancement by energy transfer in Sr3Al2O5Cl2:Ce, Eu phosphor for solid-state lighting

Orange-emissive Ce³⁺/Eu²⁺ co-doped Sr₃Al₂O₅Cl₂ phosphors were synthesized by a solid-state reaction. The large overlap between the emission spectrum of blue Sr₃Al₂O₅Cl₂:Ce³⁺ and the excitation spectrum of orange Sr₃Al₂O₅Cl₂:Eu²⁺, and the shortening trend in lifetime of Ce³⁺ donors with increasing Eu²⁺ concentration in Sr₃Al₂O₅Cl₂:Ce³⁺, Eu²⁺ provide the strong evidence of energy transfer from Ce³⁺ to Eu²⁺ ions. It supports that the orange emission intensity of the optimal co-doped phosphor is 1.5 times stronger than that of single Eu²⁺-doped one. The Sr₃Al₂O₅Cl₂:Ce³⁺, Eu²⁺ phosphor is a promising orange-emitting phosphor for warm-white-light-emitting diode because of its effective excitation in the near ultraviolet range.     

The effect of charge compensation by means of Na+ ions on the luminescence behavior of Sm3+-doped CaAl4O7 phosphor

Results of structural and spectroscopic measurements of Sm³⁺ doped calcium aluminates: Ca_1?xSm_xAl₄O₇ and Ca_1?2xSm_xNa_xAl₄O₇ (x=0.0005, 0.002, 0.01, 0.02, 0.03, 0.05) obtained by the modified Pechini method are presented. All samples yield intense orange–red emission under violet excitation (404.5 nm). Narrow bands corresponding to characteristic f–f intraconfigurational transition of Sm³⁺ in excitation and emission spectra were observed. The influences of the concentration of Sm³⁺ as well as charge compensation by co-doping with Na⁺ ions on the luminescent properties of the phosphor were investigated. Detailed analysis of the emission spectra of Sm³⁺ doped and Sm³⁺,Na⁺ co-doped CaAl₄O₇ powders proved that activator ions substitute Ca²⁺ in the host. Co-doping with Na⁺ ions enhanced greatly the intensity of the luminescence. Concentration dependencies of the intensity of luminescence and its decay kinetics proved the emission quenching at higher dopant contents due to cross-relaxation processes between Sm³⁺ ions. Fitting of the ⁴G_5/2 state fluorescence decay to the Inokuti–Hirayama model indicated dipole–dipole interaction as the dominant mechanism of the cross-relaxation processes.     

Influence of co-doping different rare earth ions on CaGa2S4: Eu, RE(RE=Ln) phosphors

Photoluminescent phosphors CaGa₂S₄: Eu²⁺, RE³⁺ (RE³⁺ including all rare earth ions except for Sc³⁺, Pm³⁺, Eu³⁺ and Lu³⁺) were prepared by sintering at high temperature in a reductive atmosphere, and their luminescent properties were studied intensively. The influences of co-doping rare earth ions on their luminescent properties were also investigated. No remarkable differences were found from excitation spectra of co-doped phosphors CaGa₂S₄: Eu²⁺, RE³⁺ in contrast with that of phosphor CaGa₂S₄: Eu²⁺, but there were a few differences in emission spectra of Ce³⁺, Pr³⁺ or Ho³⁺ co-doped phosphors. Phosphors CaGa₂S₄: Eu²⁺, RE³⁺ (RE=Ce, Pr, Gd, Tb, Ho and Y) had persistent afterglow, and very short afterglow was shown for Nd³⁺ or Er³⁺ co-doped phosphors, but no long afterglow appeared when auxiliary activator was La³⁺, Sm³⁺, Dy³⁺, Tm³⁺ or Yb³⁺. Among the phosphors with long-lasting phosphorescence, in our experiments, CaGa₂S₄: Eu²⁺, Ho³⁺ had the longest and the highest brightness long yellow afterglow. Thermo-luminescence of all co-doped phosphors was measured to find the answer of different influences from different rare earth auxiliary activators.     

Effects of non-stoichiometry and substitution on photoluminescence and afterglow luminescence of Sr4Al14O25:Eu, Dy phosphor

The effects of nonstoichiometry and cationic substitution on photoluminescence and afterglow characteristics of strontium aluminate phosphor (Sr₄Al₁₄O₂₅:Eu²⁺, Dy³⁺) were investigated. Photoluminescence intensity of both the strontium-deficit and -rich phosphors was enhanced, but no definite correlation was observed between the afterglow intensity and non-stoichiometry. The photoluminescence emission maxima were either blue or green shifted in case of non-stoichiometric phosphors, whereas the afterglow emission maxima were not affected by the non-stoichiometry. Substitution of strontium by calcium resulted in white afterglow emission at higher calcium concentration. The emission centers in case of photoluminescence and afterglow emission appear to be different. Addition of silver significantly enhanced the afterglow intensity due to increased trap density.