Vibrational spectroscopic and DFT calculation studies of a new organic–inorganic compound of bis (4-acetylanilinium) tetrachlorocadmiate (II)

The FT-IR and Raman vibrational spectra of bis (4-acetylanilinium) tetrachlorocadmiate (II) compound have been measured at room temperature by FT-infrared spectroscopy (4000–400 cm⁻¹) on polycrystalline samples, and by Raman spectroscopy (3600–30 cm⁻¹) on monocrystals. The structure of the [C₈H₁₀NO] ₂CdCl₄ formed by two cations [C₈H₁₀NO]⁺ of same type and one type of anion [CdCl₄]²⁻ was optimized by density functional theory (DFT) using the B3LYP method. The theoretical wavenumbers spectra were scaled by multiple scaling factors, yielding a good agreement between the experimentally recorded and the theoretically calculated values. Root mean square (rms) value was calculated and the small difference between experimental and calculated modes has been interpreted by intermolecular interactions in the crystal. The comparison between the [C₈H₉NO] ligand and the [C₈H₁₀NO]₂[CdCl₄] compound of the Raman spectra showed a decrease in the wavenumber of the bands assigned to the stretching vibration of (NH₃) group in the compound due to the effect of the protonation of the nitrogen.     

Experimental (UV,NMR, IR and Raman) and theoretical spectroscopic properties of 2-chloro-6-methylaniline

In this work, the experimental and theoretical UV, NMR and vibrational spectra of 2-chloro-6-methylaniline (2-Cl-6-MA, C₇H₈NCl) were studied. The ultraviolet absorption spectra of compound that dissolved in ethanol were examined in the range of 200–400 nm. The ¹H, ¹³C and DEPT NMR spectra of the compound were recorded. FT-IR and FT-Raman spectra of 2-Cl-6-MA in the liquid phase were recorded in the region 4000–400 cm^?1 and 3500–50 cm^?1, respectively. The structural and spectroscopic data of the molecule in the ground state were calculated using density functional theory (DFT) employing B3LYP exchange correlation and the 6-311++G(d,p) basis set. The vibrational frequencies were calculated and scaled values were compared with experimental FT-IR and FT-Raman spectra. The observed and calculated frequencies were found to be in good agreement. The complete assignments were performed on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method. Isotropic chemical shifts were calculated using the gauge-invariant atomic orbital (GIAO) method. Comparison of the calculated NMR chemical shifts and absorption wavelengths with the experimental values revealed that DFT method produces good results.     

Theoretical and spectroscopic studies of 5‐aminoorotic acid and its new lanthanide(III) complexes

The complexes of cerium(III) and neodymium(III) were synthesized by reaction of the respective inorganic salts with 5‐aminoorotic acid (H₄L) in amounts equal to the metal:ligand molar ratio of 1:3. The structures of the final complexes were determined by means of spectral (IR, Raman, ¹H NMR and ¹³C NMR) and elemental analysis. Significant differences in the IR spectra of the complexes were observed as compared to the spectrum of the ligand. A comparative analysis of the Raman spectra of the complexes with that of the free H₄L allowed a straightforward assignment of the vibrations of the ligand groups involved in coordination. The geometry of H₄L was computed and optimized for the first time with the Gaussian03 program using the B3PW91/6‐311++G**, B3PW91/LANL2DZ, B3LYP/6‐311++G** and B3LYP/LANL2DZ methods. The experimental IR and Raman bands of the ligand were assigned to normal modes on the basis of DFT calculations. The vibrational analysis performed for the studied species, H₄L and its complexes, helped to explain the vibrational behavior of the ligand vibrational modes sensitive to interaction with the lanthanides. The vibrational study gave evidence for the coordination mode of the ligand to lanthanide ions and was in agreement with the other theoretical prediction. Copyright © 2006 John Wiley & Sons, Ltd.     

AunLa(n=1-8)团簇的密度泛函研究

采用密度泛函理论（DFT）中的杂化密度泛函B3LYP方法,在LANL2DZ基组水平上研究了AunLa (n=1-8)团簇的几何结构。计算并讨论了基态结构稳定性及电子性质。结果表明,当n=3-8时,基态结构均为三维结构且La原子趋向与更多的Au原子结合。团簇二阶能量差分,能隙和化学硬度计算结果显示除了AuLa外,具有偶数数目的团簇比奇数数目的团簇具有更好的稳定性,其中,Au3La团簇的稳定性相对较好。     

Synthesis,structure, spectroscopic (FT-IR) and density functional modelling studies of 1-[(4-ethoxyphenylimino)methyl]napthalene-2-ol

Synthesis, crystallographic characterisation, spectroscopic (Fourier transform infrared spectroscopy [FT-IR]) and density functional modelling studies of the Schiff base 1-[(4-ethoxyphenylimino)methyl]napthalene-2-ol (C₁₉H₁₇NO₂) have been reported. The molecular structure obtained from X-ray single-crystal analysis of the investigated compound in the ground state has been compared using Hartree–Fock and density functional theory (DFT) with the 6-311++G(d,p) basis set. In addition to the optimised geometrical structures, atomic charges, molecular electrostatic potential, natural bond orbital, non-linear optical (NLO) effects and thermodynamic properties of the compound have been investigated by using DFT. The experimental (FT-IR) and calculated vibrational frequencies (using DFT) of the title compound have been compared. The solvent effect was also investigated for obtained molecular energies and the atomic charge distributions of the compound. There exists a good correlation between experimental and theoretical data for enol-imine form of the compound. The total molecular dipole moment (µ), linear polarisability (α), and the first-order hyperpolarisability (β) were predicted by the B3LYP method with different basis sets 6-31G(d), 6-31+G(d,p), 6-31++G(d,p), 6-311+G(d) 150 and 6-311++G(d,p) for investigating the effects of basis sets on the NLO properties. Our computational results yield that β_tot for the title compound is greater than those of urea.     

Theoretical studies of ethylene addition to transition metal compounds with carbene and oxo groups LnM(CH2)(O)

Quantum chemical calculations using density functional theory at the B3LYP level in combination with relativistic effective core potentials for the metals and TZ2P valence basis sets have been carried out for elucidating the reaction pathways of ethylene addition to MeReO₂(CH₂) ( C1 ). The results are compared with our previous studies of ethylene addition to OsO₂(CH₂)₂ ( A1 ) and OsO₃(CH₂) ( B1 ). Significant differences have been found between the ethylene additions to the osmium compounds A1 and B1 and the rhenium compound C1 . Seven pathways for the reaction C1 +C₂H₄ were studied, but only the [2+2]_Re,C addition yielding rhenacyclobutane C5 is an exothermic process with a high activation barrier of 48.9 kcal mol^?1. The lowest activation energy (27.7 kcal mol^?1) is calculated for the [2+2]_Re,C addition, which leads to the isomeric form C5 ′. Two further concerted reactions [3+2]_O,C, [3+2]_O,O, and [2+2]_Re,O and the addition/hydrogen migration of ethylene to one oxo ligand are endothermic processes which have rather high activation barriers (>35 kcal mol^?1). Four isomerization processes of C1 have very large activation energies of >65 kcal mol^?1. The ethylene addition to the osmium compounds A1 and B1 are much more exothermic and have lower activation barriers than the C₂H₄ addition to C1 . Copyright © 2007 John Wiley & Sons, Ltd.     

AunLa(n=1~8)团簇的密度泛函研究简

采用密度泛函理论(DFT)中的杂化密度泛函B3LYP方法,在LANL2DZ基组水平上研究了Aun La(n=1~8)团簇的几何结构.计算并讨论了基态结构稳定性及电子性质.结果表明,当n=3-8时,基态结构均为三维结构且La原子趋向与更多的Au原子结合.团簇二阶能量差分,能隙和化学硬度计算结果显示除了AuLa外,具有偶数数目的团簇比奇数数目的团簇具有更好的稳定性,其中,Au3La团簇的稳定性相对较好.     

取代基对8-羟基喹啉金属配合物电子光谱和二阶非线性光学性质的影响

在B3LYP/LANL2DZ/6-31G^*水平上优化目标化合物分子的几何结构,并分别在TD- B3LYP/LANL2DZ/6-31++G^**和B3LYP/LANL2DZ/6-31++G^**水平计算目标化合物分子的电子吸收光谱和二阶非线性光学性质.计算结果表明,引入共轭给电子基使配合物分子的最大吸收波长红移,强共轭吸电子基的引入使配合物的最大吸收波长蓝移,取代基的引入使IrQ₃型配合物的二阶非线性光学性质明显增大.对AgQ型配合物,电子跃迁属于配体内部的电荷转移（LLCT）.对PtQ₂和IrQ₃型配合物,电子跃迁属于LLCT和部分金属向配体的电荷转移.取代基对AgQ,PtQ₂,IrQ₃型配合物分子的跃迁性质几乎无影响. 关键词： 8-羟基喹啉金属配合物 电子光谱 二阶非线性光学性质 密度泛函理论     

Design and Synthesis of a Pyridine Based Chemosensor: Highly Selective Fluorescent Probe For Pb2+

A pyridine based imine-linked chemosensor has been synthesized and evaluated its binding affinity with library of transition metal ions. It has prominent selectivity towards Pb²⁺ among other metal ions in DMF/H₂O (9:1, v/v) solvent system. The 1:1 stoichiometric was confirmed by job’s plot and has a binding constant (K_a)?=?5.142?×?10³ M^?1 on fluorescence. A B3LYP/6-31G and B3LYP/LanL2DZ basis sets were employed for optimization of 3 and 3.Pb²⁺.     

DFT study of the effect of different metals on structures and electronic spectra of some organic-metal compounds as sensitizing dyes

Ruthenium polypyridined-derivative complexes are used in dye-sensitized solar cell [DSSC] as a light to current conversion sensitizer. In order to lower the cost of the DSSC the normal transition metals were used to replace the noble metal ruthenium, and some compounds [ML₂L′] (M = Pt, Fe, Ni, Zn; L = isonicotinic acid, L′ = maleonitriledithiolate, I = PtL₂L′, II = FeL₂L′, III = NiL₂L′, IV = ZnL₂L′) were selected as the replacement. The geometries, electronic structures and optical absorption spectra of these compounds have been studied by using density functional theory (DFT) calculation at the B3LYP/LANL2DZ, B3P86/LANL2DZ, B3LYP/GEN level of theory. All the geometric parameters are close to the experimental values. The HOMOs are mainly on the maleonitriledithiolate groups mixed with fewer characters of the metal atom, the LUMOs are mainly on the two pyridine ligands. This means that the electron transition is attributed to the LLCT. The maximum absorptions of complexes are found to be at 351 nm, 806 nm for compound I, and 542 nm for compound II. The maximum absorptions of complexes are found to be at 884 nm for compound III, and 560 nm for compound IV. This means that those compounds may be as a suitable sensitizer for solar energy conversion applications.     

Analysis of newly synthesized disulfides of aryldithiocarbonates and vanadium(V) and niobium(V) complexes of aryldithiocarbonates based on spectroscopic,thermogravimetric, SEM and DFT studies

ABSTRACT

Oxidation of the sodium salt of 2-methyl, 3-methyl, 4-methyl and 4-chloro-3-methylphenyldithiocarbonic acid by I₂ affords the disulfides of respective dithiocarbonates [(ArOCS₂)₂] (Ar?=?2-CH₃C₆H₄, 3-CH₃C₆H₄, 4-CH₃C₆H₄ and 4-Cl-3-CH₃C₆H₃. Vanadium(V) and Niobium(V) complexes of 2-methyl, 3-methyl, 4-methyl and 4-chloro-3-methylphenyldithiocarbonates have also been synthesised by one-step synthetic route. The metal salt (VOCl₃ and NbCl₅) were reacted with 2-CH₃C₆H₄, 3-CH₃C₆H₄, 4-CH₃C₆H₄ and 4-Cl-3-CH₃C₆H₃OCS₂Na in 1:2 stoichiometric molar ratio yielding the complexes corresponding to the molecular formula [(ArOCS₂)₂VO(Cl)] and [(ArOCS₂)₂NbCl₃] [Ar?=?2-CH₃C₆H₄, 3-CH₃C₆H₄, 4-CH₃C₆H₄ and 4-Cl-3-CH₃C₆H₃OCS₂)]. The compounds were characterised by elemental analyses, infrared, mass and heteronuclear NMR (¹H and ¹³C) spectroscopic studies. Thermogravimetric analysis and scanning electron microscopic analyses were also carried out for deeper investigation of the structural features. Comprehensive theoretical investigation was performed by applying density functional theory (DFT) calculations on vanadium and niobium complexes by the DFT/B3LYP/LANL2DZ method to obtain the optimised molecular geometry, vibrational frequencies, the highest occupied molecular orbital (HOMO), the lowest unoccupied molecular orbital (LUMO), thermodynamic properties and various other quantum-mechanical parameters.     

Theoretical and experimental studies on the adsorption behavior of thiophenol on gold nanoparticles

FT‐Raman spectra were obtained for thiophenol (TP) and TP on gold nanoparticles. All vibrational fundamentals for the TP molecule are assigned on the basis of the scaled quantum force field procedure. Three model systems are studied and compared for the interactions of TP with the Au atom: (1) TP with a Au atom, C₆H₅SH Au; (2) TP anion with a Au atom, C₆H₅S⁻ Au; and (3) TP with a Au atom and subsequent formation of thiophenylate, C₆H₅SAu. The equilibrium structures and Raman spectra were calculated for the model systems using density functional theory (DFT) with the B3LYP functionals and the mixed basis set 6‐311 + G** (for C, S, H) and LANL2DZ (for Au), and theoretical Raman wavenumbers of C₆H₅SAu and C₆H₅S⁻ Au were assigned according to potential energy distributions. The third model system is shown to be preferred over the other two. The calculated binding energies are also shown to support the third model system. It is suggested that a simple model, such as the one used in the present study, is reasonable to describe surface‐enhanced Raman spectroscopy of thiophenol adsorbed on gold nanoparticles. Copyright © 2007 John Wiley & Sons, Ltd.     

密度泛函理论的不同方法研究小钨团簇的结构与稳定性

分别利用密度泛函理论的LSDA方法和B3LYP 方法在有效核势基组(LanL2DZ)水平上系统地研究了Wn(n=2-14)团簇的结构和稳定性.Wn(n=2-14)团簇全局能量最小的最稳定结构被确定.结果表明:在所讨论的尺寸范围内,LSDA方法比B3LYP 方法得到的平均结合能与一阶能量差分高;大部分Wn(n=2-14) 团簇在两种方法计算下具有相同的几何结构.两种方法计算结果均表明:除了W3自旋多重度为3重态外,其余尺寸团簇的自旋多重度均为单重态;n=7的最低能量结构为双戴帽五边环,而非正十面体,n=8-10为笼型结构,n=11-14为扁长型结构.综合平均结合能、一阶能量差分和二阶能量差分,两种计算方法均表明Wn(n=2-14)团簇具有相同的幻数序列(2,6,9 和 13).     

Zn2+-Schiff’s Base Complex as an “On–Off-On” Molecular Switch and a Fluorescence Probe for Cu2+ and Ag+ Ions

The present study presents a thorough theoretical analysis of the electronic structure and conformational preference of Schiff’s base ligand N,N-bis(2-hydroxybenzilidene)-2,4,6-trimethyl benzene-1,3-diamine (H₂L) and its metal complexes with Zn²⁺, Cu²⁺ and Ag⁺ ions. This study aims to investigate the behavior of H₂L and the binuclear Zn²⁺ complex (1) as fluorescent probes for the detection of metal ions (Zn²⁺, Cu²⁺ and Ag⁺) using density functional theory (DFT) and time-dependent density functional theory (TDDFT). The six conformers of the H₂L ligand were optimized using the B3LYP/6–311?+??+?G** level of theory, while the L^?2-metal complexes were optimized by applying the B3LYP functional with the LANL2DZ/6–311?+??+?G** mixed basis set. The gas-phase and solvated Enol-cis isomer (E-cis) was found to be the most stable species. The absorption spectra of the E-cis isomer and its metal complexes were simulated using B3LYP, CAM-B3LYP, M06-2X and ωB97X functionals with a 6–311?+??+?G** basis set for C, O, N and H atoms and a LANL2DZ basis set for the metal ions (Zn²⁺, Cu²⁺ and Ag⁺). The computational results of the B3LYP functional were in excellent agreement with the experimental results. Hence, it was adopted for performing the emission calculations. The results indicated that metal complex (1) can act as a fluorescent chemosensor for the detection of Ag⁺ and Cu²⁺ ions through the mechanism of intermolecular charge transfer (ICT) and as a molecular switch “On–Off-On” via the replacement of Cu²⁺ by Ag⁺ ions, as proved experimentally.

     

DFT(B3LYP/LanL2DZ), non-linear optical and electrical studies of a new hybrid compound: [C6H10(NH3)2]CoCl4·H2O

A new organic-inorganic material [C₆H₁₀(NH₃)₂]CoCl₄·H₂O was reported. The title compound was synthesized at room temperature by slow evaporation and then characterized by a single X-ray diffraction, spectroscopic measurements, thermal analysis and dielectric technique. It crystallizes in the non-centrosymmetric space group Pna2₁ with the following unit cell parameters: a=12.5328(1) Å, b=9.0908(1) Å, c=11.7440(1) and α=β=γ=90°. The structure can be described by the alternation of two different cationic-anionic layers. It consists of isolated H₂O, isolated [CoCl₄]²⁻ tetrahedral anions and diammoniumcyclohexane [C₆H₁₀(NH₃)₂]²⁺ cations, which are connected via N–H…Cl, N–H…O and O–H…N hydrogen bonds. The Hirshfeld surface analysis was conducted to investigate intermolecular interactions and associated 2D fingerprint plots, revealing the relative contribution of these interactions in the crystal structure quantitatively. Theoretical calculations were performed using DFT/B3LYP/LanL2DZ method for studying the molecular structure and vibrational spectra and especially to examine the non-linear optical behavior of the compound. Solid state ¹³C NMR spectrum shows three signals correspond to three different carbon environments. Thermal analysis discloses a phase transition at the temperature 315 K and the evaporation of water molecule at 327 K. A detailed dielectric study was reported and shows a good agreement with thermal measurements.     

镍-配体键解离焓的密度泛函理论研究

许多镍催化反应中包含镍与配体(如氮杂环卡宾、三级膦等)配位键的断裂与生成过程,准确计算Ni-L键解离焓有助于理解这类反应．以近期Nolan小组报道的Ni-L键的解离焓为基准,评估不同密度泛函理论(包括B3LYP、M06、MPWB1K等)、不同基组(包括Ni上的赝势基组和其它原子上的全电子基组)的计算准确性,发现MPWB1K/LanL2DZ:6-31+G(d,p)//MPWB1K/LanL2DZ:6-31G(d)方法得出的结果与实验值吻合度最佳,溶剂化效应的相关计算表明CPCM和PCM溶剂化模型表现良好．     

Calculation of vibrational spectra for dioxouranium monochloride monomer and dimers

Structural models were built and spectral characteristics were calculated based on ab initio calculations for the monomer and dimers of dioxouranium monochoride UO₂Cl. The calculations were carried out in the effective core potential LANL2DZ approximation for the uranium atom and all-electron basis sets using DFT methods for oxygen and chlorine atoms (B3LYP/cc-pVDZ). The monomer UO₂Cl was found to possess an equilibrium planar (close to T-shaped) configuration with C_2v symmetry. The obtained spectral characteristics were analyzed and compared with experimental data. The adequacy of the proposed models and the qualitative agreement between calculation and experiment were demonstrated.     

An experimental and quantum-chemical study of the Raman spectra and rotational isomerism of thiophosphites (RS) n PCl3 − n (R = Me, Et; n = 1, 2)

The Raman spectra of different conformations of CH₃SPCl₂, C₂H₅SPCl₂, and (C₂H₅S)₂PCl are studied within the framework of the density functional theory (B3LYP/6-31G* and B3LYP/6-31+G*) using the method of scaling of force fields. Comparison of the calculated and experimental spectra makes it possible to interpret the latter and to establish the existence of trans and gauche conformers of these molecules, which are formed due to internal rotation about the P-S and S-C bonds. This comparison also shows that, for the prediction of the degrees of depolarization of Raman lines to be correct, it is necessary to introduce diffuse functions into the basis set.     

Synthesis,structural, and spectroscopic (FT-IR,NMR, and UV) Characterization of 1-(Cyclohexylmethyl)-2-(pyridin-2-yl)-1<Emphasis Type="Italic">H</Emphasis>-benzo[<Emphasis Type="Italic">d</Emphasis>]imidazole by experimental techniques and quantum chemical calculations

The title compound (II), 1-(cyclohexylmethyl)-2-(pyridin-2-yl)-1H-benzo[d]imidazole (C₁₉H₂₁N₃), was synthesized via N-alkylation of 2-(pyridin-2-yl)-1H-benzo[d]imidazole (I). Both compounds I and II were characterized by IR, NMR and UV-vis spectroscopy. Solid-state structure of compound II was determined by single-crystal X-ray diffraction technique. Furthermore, quantum chemical calculations employing density functional theory (DFT/B3LYP) method with the 6–311++G(d, p) basis set were performed for the theoretical characterization of the molecular and spectroscopic features of the compounds. Using the TD-DFT method, electronic absorption spectra of the compounds have been predicted at same level. When the obtained results were compared with the experimental findings, it is seen that theoretical results support the experimental data and a good agreement exists between them.     

Study of the optoelectronic and piezoelectric properties of ZrO2 doped PVDF from quantum chemistry calculations

In this study, we have evaluated the optoelectronic and piezoelectric properties of doped PVDF. The electronic structures and the linear and non-linear optical properties of ZrO2-doped PVDF were calculated by adopting the LDA approximations for the exchange-correlation potential in the DFT method integrated in Gaussian 09. Optoelectronic parameters and ground state molecular geometry were calculated using B3LYP functional and LanL2DZ as the basis. We chose the calculation with the B3LYP functional because it is a relatively inexpensive and it is precise method to predict molecular structures, energies and frequencies. In this work, some optical parameters and constants such as refractive index, electrical susceptibility, dipole moment, average polarizability and hyperpolarizability, phase velocity have been calculated. Dielectric constants, ionization potentials, electronic affinities, electronegativities, hardness and flexibility were also calculated. Finally, the piezoelectric properties such as the piezoelectric coefficient and the pyroelectric coefficient are evaluated. The calculated electronic structures show that virgin PVDF, hybrid molecules PVDF/2ZrO2 and PVDF/3ZrO2 have an E_gap less than 3 eV. On the other hand, the hybrid PVDF/ZrO2 molecule is a good dielectric and therefore a good piezoelectric nanocomposite because its E_gap is 5.89 eV greater than 3 eV. Finally, the results show that the hybrid molecules PVDF-2ZrO2 could have potential applications not only as piezoelectric materials but also as semiconductor components, nonlinear optical materials and possible building materials for molecular electronics and photonic devices.