Simple air-gap fiber Fabry–Perot interferometers based on a fiber endface with Sn-microsphere overlay

This study presents a simple, cost-effective and sensitive air-gap fiber Fabry–Perot interferometer (AG-PPFI) which is based on a metal Tin (Sn)-overlaying fiber technique. An extremely small drop of metallic Sn was heated and then melted to shrink into a microsphere owing to the cohesion of the material. When a fiber was inserted into the melting Sn microsphere, an air gap was naturally formed between the fiber endface and the metal Sn during the cooling process. By carefully controlling the reaction time, various air-gaps can be formed as the Fabry–Perot interferometric cavities for the proposed AG-PPFIs. Measurements reveal that a smaller length of air-gap and heavier mass of Sn-microsphere are associated with higher sensitivity of temperature, but the former is dominated. A best temperature sensitivity of wavelength shift with +4.3 nm/°C is achieved when the air-gap is about 5 μm with mass of Sn-microsphere of about 10 μg. The variation of the wavelength shift is equivalent to sensitivity for a change in the cavity length of +14.83 nm/°C.     

Design of hybrid photonic crystal fiber: Polarization and dispersion properties

A highly birefringent dispersion compensating hybrid photonic crystal fiber is presented. This fiber successfully compensates the chromatic dispersion of standard single mode fiber over E- to L-communication bands. Simulation results reveal that it is possible to obtain a large negative dispersion coefficient of about −1054.4 ps/(nm km) and a relative dispersion slope of 0.0036 nm⁻¹ at the 1550 nm wavelength. The proposed fiber simultaneously provides a high birefringence of order 3.45 × 10⁻² at the 1550 nm. Moreover, it is confirmed that the designed fiber successfully operates as a single mode in the entire band of interest. For practical conditions, the sensitivity of the fibers dispersion properties to a ±2% variation around the optimum values is carefully studied and the nonlinearity of the proposed fiber is also reported and discussed. Such fibers are essential for high speed transmission system as a dispersion compensator, sensing applications, fiber loop mirrors as well as maintaining single polarization, and many nonlinear applications such as four-wave mixing, etc.     

Design of multi-layer mirrors for measuring optical phase modulation at 1300 nm

A theoretical design and experimental realization of multi-layer mirrors for Fabry–Perot interferometry and optical telecommunications is described in this work. The mirrors were designed and fabricated by 13 successive thin layers to achieve very high reflectance at optical wavelengths around 1300 nm. Thin layers are ZnS and MgF₂ presenting high and low refractive index, respectively. Layer thickness λ_o/2 at λ_o=656 nm. Experimental results include characterization of transmittance of mirrors around 1300 nm. Additionally, the mirrors were integrated in a Fabry–Perot interferometer to characterize optical sources emitting at 1300 nm. Finally to show a practical application, optical phase modulation was analyzed, using the fabricated mirrors through a scanning Fabry–Perot interferometer acting as high-resolution optical spectrum analyzer (OSA).     

High speed ultra short pulse fiber ring laser using photonic crystal fiber nonlinear optical loop mirror

A scheme to generate high speed optical pulse train with ultra short pulse width is proposed and experimentally studied. Two-step compression is used in the scheme: 20 GHz and 40 GHz pulse trains generated from a rational harmonic actively mode-locked fiber ring laser is compressed to a full width at half-maximum (FWHM) of ~ 1.5 ps using adiabatic soliton compression with dispersion shifted fibers (DSF). The pulse trains then undergo a pedestal removal process by transmission through a cascaded two photonic crystal fiber (PCF)-nonlinear optical loop mirrors (NOLM) realized using a double-ring structure. The shortest output pulse width obtained was ~ 610 fs for 20 GHz pulse train and ~ 570 fs for 40 GHz pulse train. The signal to noise ratio of the RF spectrum of the output pulse train is larger than 30 dB. Theoretical simulation of the NOLM transmission is conducted using split-step Fourier method. The results show that two cascaded NOLMs can improve the compression result compared to that for a single NOLM transmission.     

All fiber passively mode locked zirconium-based erbium-doped fiber laser

All passively mode locked erbium-doped fiber laser with a zirconium host is demonstrated. The fiber laser utilizes the Non-Linear Polarization Rotation (NPR) technique with an inexpensive fiber-based Polarization Beam Splitter (PBS) as the mode-locking element. A 2 m crystalline Zirconia–Yttria–Alumino-silicate fiber doped with erbium ions (Zr–Y–Al-EDF) acts as the gain medium and generates an Amplified Spontaneous Emission (ASE) spectrum from 1500 nm to 1650 nm. The generated mode-locked pulses have a spectrum ranging from 1548 nm to more than 1605 nm, as well as a 3-dB bandwidth of 12 nm. The mode-locked pulse train has an average output power level of 17 mW with a calculated peak power of 1.24 kW and energy per pulse of approximately 730 pJ. The spectrum also exhibits a Signal-to-Noise Ratio (SNR) of 50 dB as well as a repetition rate of 23.2 MHz. The system is very stable and shows little power fluctuation, in addition to being repeatable.     

Low-threshold all-fiber 1000 nm supercontinuum source based on highly non-linear fiber

We present an highly efficient all-fiber compact supercontinuum source that exhibits a nearly flat spectrum from 1.1 μm to 2.1 μm. This broadband infrared optical source is made-up of a highly non-linear fiber pumped by a 1.55 μm self-Q-switched Er-Brillouin nanosecond pulsed fiber laser, which in turn is pumped by a low-power 1480 nm laser diode. In this work we highlight the great potential of highly non-linear fiber for supercontinuum generation with respect to conventional dispersion-shifted fiber by demonstrating a significant 10 dB power enhancement in the short wavelength side of the supercontinuum.     

Cobalt metal nanoparticles embedded in SiO2 dielectric layer for the application of nonvolatile memory

Metal–oxide–semiconductor structures (MOS) with the embedded Co nanoparticles (NPs) were efficiently fabricated by utilizing an external laser irradiation technique for the application of nonvolatile memory. Images of high resolution transmission electron microscopy measurements exhibited that the Co NPs of 5 nm in diameter were clearly embedded in SiO₂ gate oxide. Capacitance–voltage measurements certainly exhibited flat-band voltage shift of 2.2 V from 2 V to −8 V in sweeping range. The retention characteristics of MOS capacitors with the embedded Co NPs were also studied as a function of tunnel oxide thickness to confirm the suitability of nonvolatile memory devices with metal NPs. The experimental results reveal that our unique laser process will give possible promise for experimental efficient formation or insertion of metal NPs inside the gate oxide.     

Fabry–Pérot cavities based on chemical etching for high temperature and strain measurement

In this paper, two hybrid multimode/single mode fiber Fabry–Pérot (FP) cavities were compared. The cavities fabricated by chemical etching are presented as high temperature and strain sensors. In order to produce this FP cavity a single mode fiber was spliced to a graded index multimode fiber with 62.5 μm core diameter. The Fabry–Pérot cavities were tested as a high temperature sensor in the range between room temperature and 700 °C and as strain sensors. A reversible shift of the interferometric peaks with temperature allowed to estimate a sensitivity of 0.75 ± 0.03 pm/°C and 0.98 ± 0.04 pm/°C for the sensor A and B respectively. For strain measurement sensor A demonstrated a sensitivity of 1.85 ± 0.07 pm/μ? and sensor B showed a sensitivity of 3.14 ± 0.05 pm/μ?. The sensors demonstrated the feasibility of low cost fiber optic sensors for high temperature and strain.     

Performance analysis of optical network based on optical add drop multiplexers with different MZI techniques

This paper presents an investigation on the performance of an optical network in terms of crosstalk based on optical add drop multiplexers with Mach–Zehnder interferometer (MZI), MZI-semiconductor optical amplifier (SOA) and MZI-fiber Braggs gratings (FBG) techniques obtained at 8 × 10 Gbps with 0.1 nm channel spacing wavelength division multiplexing (WDM) transmission with optical add drop multiplexer (OADM) placed at the 20 km point of a 40 km link. It is found that the signal can be transmitted with least BER and better Q-factor with MZI-FBG based OADM and the worst case is found with the MZI-SOA based OADM.     

Laser microplasma as a tool to fabricate phase grating applied for laser beam splitting

In this paper, we present the method of phase gratings (PGs) formation on the fused silica by laser-induced black body heating (LIBBH) technology with irradiation of ytterbium fiber laser (λ=1.064 µm, τ ~ 4–200 ns, ν ~ 10–100 kHz). Formed PGs have sinusoidal profile with possible depth modulation of 0.5–2 µm. The PGs formation time, depending on its size and the period, ranged between 1 and 5 min. The optical characteristics of the PGs are studied and gained results are compared with the diffraction theory. This result shows that it is possible to fabricate different PGs with necessary optical characteristics by LIBBH technology. The potential application of such optical elements is beam splitting. Thus, the experiment with interference of laser beams has also been carried out in this work. The result of metal film processing by interference pattern is presented in the article.     

Advanced multifunctional optical switch for multimode optical fiber networks

In this work, an advanced multifunctional optical switch based on multimode fibers is proposed. It can work as a 3 × 1 optical multiplexer/combiner, a 2 × 2 optical switch, a variable optical attenuator and a variable optical power splitter. All these functionalities can be developed in the same device without any hardware modification, only by using the proper ports and control electronics.The proposed switch has been developed for being used in the visible and near infrared wavelength range: 450–650 nm for optical fiber automobile applications, 650–850 nm for home broadband applications; and 850–1300 nm for multimode fiber access networks. Up to three different types of twisted nematic liquid crystal cells have been designed and fabricated for fulfilling these different wavelength ranges as part of the proposed device.The multifunctional switch has been implemented and experimentally tested. Crosstalk usually better than ? 15 dB at 532 nm, 660 nm and 850 nm, in any state has been measured. Switching is achieved at voltage levels of 4 Vrms. Fiber to fiber insertion losses when operating as a 2 × 2 optical switch, range from 10 to 15 dB within 200 nm wavelength range; with a non-optimized optics for collimation and coupling.     

Inherently gain flattened S-band erbium doped fiber amplifier based on dual core resonant leaky fiber

A co-axial dual core resonant leaky optical fiber (DCRLF) is designed for inherent gain equalization of S-band erbium doped fiber amplifier (EDFA). Resonance tail of leakage loss of the fiber into the S-band region is utilized to flatten the gain. We have numerically studied the effect of various design parameters and their fabrication tolerances on gain flattening. We show 23.5 dB flat gain with ± 0.9 dB ripple over 30 nm bandwidth (1490–1520 nm) using 120 mW pump. The study should be useful in designing optical fiber amplifiers for optical communication system employing wavelength division multiplexing.     

Design of a highly nonlinear twin bow-tie polymer photonic quasi-crystal fiber with high birefringence

A twin bow-tie polymer-based photonic quasi-crystal fiber with high birefringence, high nonlinearity and low dispersion as well as maintaining single mode operation is presented in the wavelength range 1.8–2.2 μm. Through optimizing fiber structure parameter using a full-vector finite-element method combined with perfectly matched layers boundary condition, the birefringence is as high as 2.43 × 10⁻³, the nonlinearity is as high as 118 W⁻¹ km⁻¹, and the dispersion is only 25 ps/nm/km at 2 μm with the holes pitch of 3.3 μm. From the point of fabrication, the influences of deviation of each air hole diameter are discussed to verify the robustness of the photonic quasi-crystal fiber designed.     

Synchrotron quantification of ultrasound cavitation and bubble dynamics in Al–10Cu melts

Knowledge of the kinetics of gas bubble formation and evolution under cavitation conditions in molten alloys is important for the control casting defects such as porosity and dissolved hydrogen. Using in situ synchrotron X-ray radiography, we studied the dynamic behaviour of ultrasonic cavitation gas bubbles in a molten Al–10 wt% Cu alloy. The size distribution, average radius and growth rate of cavitation gas bubbles were quantified under an acoustic intensity of 800 W/cm² and a maximum acoustic pressure of 4.5 MPa (45 atm). Bubbles exhibited a log-normal size distribution with an average radius of 15.3 ± 0.5 μm. Under applied sonication conditions the growth rate of bubble radius, R(t), followed a power law with a form of R(t) = αt^β, and α = 0.0021 & β = 0.89. The observed tendencies were discussed in relation to bubble growth mechanisms of Al alloy melts.     

Formation of Si nanowires by the electrochemical reduction of porous Ni/SiO2 blocks in molten CaCl2

Silicon nanowires (SiNWs) were prepared by the electrochemical reduction of solid Ni/SiO₂ blocks in molten CaCl₂ at 1173 K. The SiNWs have diameter distributions ranging from 80 to 350 nm, and the nickel–silicon droplets are found on the tips of the nanowires. The growth mechanism of SiNWs was investigated, which confirmed that the nano-sized nickel–silicon droplets formed at the Ni/SiO₂/CaCl₂ three-phase interline. The droplets lead to the oriented growth of SiNWs. Formation of nano-sized nickel–silicon droplets suggests that this method could be a potential way to produce nano-sized metal silicides.     

Widely tunable compact erbium-doped fiber ring laser for fiber-optic sensing applications

A compact erbium-doped ring-shaped fiber laser suitable for fiber-optic sensing applications has been developed. The fiber laser utilized a tunable fiber Fabry–Perot filter as the tuning element and had a moderate milli-Watt level power output over almost the whole tuning range from 1530 to 1595 nm with a power fluctuation of 0.15 dB. High repetition rate scanning of laser operation over the whole tuning range was achieved at rates of up to 200 Hz. Moreover, the performance of the ring-shaped fiber laser configured with a high-concentration erbium-doped fiber was investigated for its larger wavelength tunability of over 100 nm. Output power characteristics of this ring-shaped fiber laser were also investigated when it worked in a scanning mode. A distorted power wavelength dependence, as well as some pulsing phenomenon were observed in scanning mode.     

A surface-plasmon-polariton wavelength splitter based on a metal–insulator–metal waveguide

A surface-plasmon-polariton (SPP) wavelength splitter based on a metal–insulator–metal waveguide with multiple teeth is proposed. Using the transfer-matrix method, a plasmonic band gap is identified in the multiple-toothed structure, and the splitting wavelength of the SPP splitter can be easily adapted by adjusting the widths of the teeth and the gaps. The proposed wavelength splitter is further verified through finite-difference time-domain (FDTD) simulations, in which SPPs with incident wavelengths of 756 nm and 892 nm are successfully split and guided in opposite directions in the waveguide, with extinction ratios of 30 dB and 29 dB, respectively.     

Cross-shaped metal–semiconductor–metal plasmonic crystal for terahertz modulator

The transmission and tuning properties of a cross-shaped plasmonic crystal based on periodic metal–semiconductor–metal (MSM) structures have been investigated in the terahertz (THz) regime. According to the mode analysis, we find that the different resonance modes in the plasmonic crystal show the different changes when this device is actively controlled by the carrier injection of the MSM structures. The longitudinal modes disappear, while the horizontal mode moves to a higher frequency. The former leads to an intensity modulation at 0.5 THz and 1.1 THz when the groove depth h = 60 μm, and the later leads to a band blue-shift from 1.325 THz to 1.38 THz. These results will be applied to THz modulation and tunable filtering.     

Electronic excitations and luminescence of SrAlF5 crystals doped with Ce3+ ions

This paper reports the results of a time-resolved photoluminescence and energy transfer processes study in Ce³⁺ doped SrAlF₅ single crystals. Several Ce³⁺ centers emitting near 4 eV due to 5d-4f transitions of Ce³⁺ ions substituting for Sr²⁺ in non-equivalent lattice sites were identified. The lifetime of these transitions is in the range of 25–35 ns under intra-center excitation in the energy region of 4–7 eV at T = 10 K. An effective energy transfer from lattice defects to dopant ions was revealed in the – 7–11 eV energy range. Both direct and indirect excitation channels are efficient at room temperature. Excitons bound to dopants are revealed at T = 10 K under excitation in the fundamental absorption region above 11 eV, as well as radiative decay of self-trapped excitons resulting in luminescence near 3 eV.