Luminescent properties of red-emitting LiSr4B3O(9−3x/2)Nx:Eu2+ phosphor for white-LEDs

An Eu²⁺-activated oxynitride LiSr_(4?y)B₃O_(9?3x/2)N_x:yEu²⁺ red-emitting phosphor was synthesized by solid-state reactions. The synthesized phosphor crystallized in a cubic system with space group Ia–3d. The LiSr₄B₃O_(9?3x/2)N_x:Eu²⁺ phosphors exhibited a broad red emission band with a peak at 610 nm and a full width at half maximum of 106 nm under 410 nm excitation, which is ascribed to the 4f⁶5d¹→4f⁷ transition of Eu²⁺. The optimal doped nitrogen concentration was observed to be x=0.75. The average decay times of two different emission centers were estimated to be 568 and 489 ns in the LiSr_3.99B₃O_8.25N_0.5:0.01Eu²⁺ phosphors, respectively. Concentration quenching of Eu²⁺ ions occurred at y=0.07, and the critical distance was determined as 17.86 Å. The non-radiative transitions via dipole–dipole interactions resulted in the concentration quenching of Eu²⁺-site emission centers in the LiSr₄B₃O₉ host. These results indicate LiSr₄B₃O_(9?3x/2)N_x:Eu²⁺ phosphor is promising for application in white near-UV LEDs.     

Effect of Sr2+-doping on structure and luminescence properties of BaAl2Si2O8:Eu2+ phosphors

Sr²⁺ doped BaAl₂Si₂O₈:Eu²⁺ phosphor was synthesized by chemical co-precipitation method. With the increase of Sr²⁺ concentration, the phase structure of (Ba_0.965 ? xSr_xEu_0.035)Al₂Si₂O₈ changes from hexagonal phase to monoclinic phase owing to large activation energy in SrAl₂Si₂O₈ system. (Ba_0.965 ? xSr_xEu_0.035)Al₂Si₂O₈ phosphor exhibits a broad blue band peaking at 425 nm due to the 4f⁶5d–4f⁷(⁸S_7/2) transition of Eu²⁺ ions. The emission intensity increases, accompanied by the blue shift of emission maximum from 459 to 417 nm with the Sr²⁺ doping concentration increasing. The optimal concentration of Sr²⁺ ion is 40%, and the phosphor shows high color stability in CIE chromaticity diagram. The result indicates that Sr²⁺ doped phosphor not only can enhance the relative intensity but also can adjust the chromaticity coordinate.     

Synthesis and luminescence properties of green phosphors Ca6Sr4(Si2O7)3Cl2:Eu2+ for white light emitting diodes

Divalent europium-activated chlorosilicate Ca₆Sr₄(Si₂O₇)₃Cl₂:Eu²⁺ phosphors were synthesized by a conventional solid-state reaction under reductive atmosphere. These phosphors can be efficiently excited by UV–visible light from 320 to 420 nm, which matches that of a near UV-emitting InGaN chip. Under the 360 nm excitation, Ca₆Sr_3.97(Si₂O₇)₃Cl₂:0.03Eu²⁺ phosphor shows a strong and broad emission centering at 515 nm, which is attributed to the 5d→4f transition of Eu²⁺ ion. The mechanism of concentration quenching was determined to be the dipole–dipole interaction and the critical energy-transfer distance of Eu²⁺ was calculated as 3.31 nm. The CIE chromaticity coordinates of Ca₆Sr_3.96(Si₂O₇)₃Cl₂:0.03Eu²⁺ phosphor are (0.127, 0.770) according to the emission spectrum. It can be expected that Ca₆Sr₄(Si₂O₇)₃Cl₂:Eu²⁺ phosphor is a promising candidate as the green component for near-ultraviolet InGaN-based white LED.     

Phase dependent photoluminescence and energy transfer in Ca2P2O7: Eu2+, Mn2+ phosphors for white LEDs

α- and β-Ca₂P₂O₇: Eu²⁺, Mn²⁺ phosphors were prepared by solid-state reaction. Phase transition from tetragonal (β-phase) to monoclinic (α-phase) is performed. A strong orange emission of Mn²⁺ is observed in both α-and β-Ca₂P₂O₇: Eu²⁺, Mn²⁺ upon near ultraviolet (UV) excitation through energy transfer from Eu²⁺ to Mn²⁺. The transfer efficiencies for various Mn²⁺ concentrations are estimated based on lifetime measurements of the fluorescence of Eu²⁺ in the two phases. The photoluminescence excitation spectra of α-Ca₂P₂O₇: Eu²⁺, Mn²⁺ can cover 400 nm of the near-UV range, denoting its potential use as a phosphor with intense orange component for white light emitting diodes (LEDs).     

Photoluminescence properties of a new Eu2+-activated CaLaGa3S7 yellowish-green phosphor for white LED applications

A thiogallate chalcogenide phosphor CaLaGa₃S₇:Eu²⁺ was synthesized by a solid-state reaction at 950 °C in a H₂S atmosphere. The photoluminescence excitation,emission spectra, concentration quenching, fluorescence lifetime, and thermal quenching process of the phosphor were investigated in detail. It was found that the synthesized phosphor emitted intense and broadband yellowish-green light with a peak at 554 nm. Thus, the proposed phosphor is suitable for the development of blue or near UV LED. The critical dopant concentration of Eu²⁺ (R_c=15 Å) per unit formula was found to be 0.15 mol. At room temperature, the fluorescence lifetime of Eu²⁺ in CaLaGa₃S₇ was found to be 0.216 μs. The activation energy for thermal quenching was 0.29 eV. The chromaticity coordinates of our phosphor is very close in color to Y₃Al₅O₁₂:Ce³⁺. Therefore, CaLaGa₃S₇:Eu²⁺ can be a good alternative as a yellowish-green phosphor and can be used for white light generation in phosphor-converted LEDs.     

Photoluminescence properties of Eu2+–Mn2+ codoped Ca-α-SiAlON phosphors

Eu²⁺–Mn²⁺ codoped Ca-α-SiAlON phosphors, Ca_0.736?ySi_9.6Al_2.4O_0.8N_15.2:0.064 Eu²⁺, yMn²⁺, were firstly synthesized by the high temperature solid state reaction method. The effects of doped Eu²⁺ and Eu²⁺–Mn²⁺ concentrations on the photoluminescence properties of the as-prepared phosphors were investigated systematically. Powder X-ray diffraction shows that pure Ca-α-SiAlON phase is synthesized after sintering at 1700 °C for 2 h under 0.5 MPa N₂ atmosphere. The excitation spectra of Eu²⁺-doped Ca-α-SiAlON phosphors are characterized by two dominant bands centered at 286 nm and 395 nm, respectively. The photoluminescent spectrum of Eu²⁺-doped Ca-α-SiAlON phosphor exhibits an intense emission band centered at 580 nm due to the allowed 4f ⁶5d→4f ⁷ transition of Eu²⁺, showing that the phosphor is a good candidate for creating white light when coupled to a blue LED chip. The intensities of both excitation and emission spectra monotonously decrease with the increment of codoped Mn²⁺ content (i.e. y value), indicating that energy transfer between Eu²⁺ and Mn²⁺ is inefficient in the case of Eu²⁺–Mn²⁺ codoped Ca-α-SiAlON phosphors.     

Fluorescent properties of a green- to red-emitting Eu3+, Tb3+ codoped amorphous calcium silicate phosphor

A Eu³⁺, Tb³⁺ codoped amorphous calcium silicate phosphor was prepared by heating a Eu³⁺, Tb³⁺ codoped calcium silicate hydrate phosphor formed by liquid-phase reaction for 30 min at 900 °C. The excitation peak wavelength of the resulting phosphor was 379 nm and the emission peak wavelengths were at 542 nm, attributed to the ⁵D₄→⁷F₅ transition of Tb³⁺, and at 613 mm, attributed to the ⁵D₀→⁷F₁ transition of Eu³⁺. The intensity ratio of the two peaks could be freely controlled by varying the Eu/Tb atomic ratio of the Eu³⁺, Tb³⁺ codoped amorphous calcium silicate phosphor, allowing light to be emitted over a wide range from green to red. It was clarified that electron transfer from Tb³⁺ to Eu³⁺ is occurring.     

The influence of some processing conditions on host crystal structure and phosphorescence properties of SrAl2O4:Eu2+, Dy3+ nanoparticle pigments synthesized by combustion technique

The spectroscopic and host phase properties of SrAl₂O₄:Eu²⁺, Dy³⁺ phosphors with a series of different initiating combustion temperature, urea concentration as a fuel and critical pH of precursor solution are investigated. The SrAl₂O₄:Eu²⁺, Dy³⁺ nanoparticle pigments were obtained by exothermic combustion process within less than 5 min. The sample that ignited at initiating combustion temperature of 600 °C exhibits highest intensity emission peak at 517 nm in which the SrAl₂O₄ host phase has the maximum fraction of monoclinic SrAl₂O₄ phase. The excitation spectra consist of 240 and 254 nm broad peaks. The experimental results show that the optimum ratio of urea is 2.5 times higher than theoretical quantities for best emission condition of SrAl₂O₄:Eu²⁺, Dy³⁺ phosphor particles. The critical pH was obtained about 5.2. The crystallite size of these pigments is about 40 nm before thermal treatment and 62 nm after thermal treatment, respectively.     

Spectral structure of barium–phosphate–silicate phosphor Ba10(PO4)4(SiO4)2:EuM+

The new apatite–silicate phosphor doped with Eu ions in Ba₁₀(PO₄)₄(SiO₄)₂ matrix was synthesized through solid-state reaction. It was found that the as-synthesized phosphor displayed apparent mixture of band and line emission peaks giving rise to pseudo white light. The narrow emission bands peaking at 410 nm can be assigned to the 4f⁶5d→4f⁷(⁸S_7/2) transition of Eu²⁺ ions, and the other band at 507 nm is ascribed to anomalous fluorescent emission. One group of line emission peaking at 595 nm and 613 m were due to the ⁵D₀→⁷F₁ and ⁵D₀→⁷F₂ transition of Eu³⁺ ions. The occurrence of photostimulated luminescence and discrete emission lines in violet (410 nm), green (507 nm) and red (595 nm and 613 nm) colors indicate that this material has potential application in fields of white-light-emitting.     

Luminescent features of sol–gel derived rare-earth multi-doped oxyfluoride nano-structured phosphors for white LED application

Rare-earth doped oxyfluoride 75SiO₂:25PbF₂ nano-structured phosphors for white-light-emitting diodes were synthesized by thermal treatment of precursor sol–gel derived glasses. Room temperature luminescence features of Eu³⁺, Sm³⁺, Tb³⁺, Eu³⁺/Tb³⁺, and Sm³⁺/Tb³⁺ ions incorporated into low-phonon-energy PbF₂ nanocrystals dispersed in the aluminosilicate glass matrix and excited with UV light emitting diode were investigated. The luminescence spectra exhibited strong emission signals in the red (600, 610, 625, and 646 nm), green (548 and 560 nm), and blue (485 nm) wavelength regions. White-light emission was observed in Sm/Tb and Eu/Tb double-doped activated phosphors employing UV-LED excitation at 395 nm. The dependence of the luminescence emission intensities upon annealing temperature and rare-earth concentration was also examined. The results indicated that there exist optimum annealing temperature and activator ion concentration in order to obtain intense visible emission light with high color rendering index. The study suggests that the nanocomposite phosphor based upon 75SiO₂:25PbF₂ host herein reported is a promising contender for white-light LED applications.     

Optical properties,luminescence quenching mechanism and radiation hardness of Eu-doped GaN red powder phosphor

We report on the luminescence quenching mechanism of Eu-doped GaN powder phosphor produced with a low-cost, high yield rapid-ammonothermal method. We have studied as-synthesized and acid rinsed Eu-doped GaN powders with the Eu concentration of ～0.5 at.%. The Eu-doped GaN photoluminescence (PL) was investigated with 325 nm excitation wavelength at hydrostatic pressures up to 7.7 GPa in temperature range between 12 K and 300 K. The room temperature integrated Eu³⁺ ion PL intensity from acid rinsed material is a few times stronger than from the as-synthesized material. The temperature dependent PL studies revealed that the thermal quenching of the dominant Eu³⁺ ion transition (⁵D₀ → ⁷F₂) at 622 nm is stronger in the chemically modified phosphor indicating more efficient coupling between the Eu³⁺ ion and passivated GaN powder grains. Furthermore, it was found that thermal quenching of Eu³⁺ ion emission intensity can be completely suppressed in studied materials by applied pressure. This is due to stronger localization of bound exciton on Eu³⁺ ion trap induced by hydrostatic pressure. Furthermore, the effect of 2 MeV oxygen irradiation on the PL properties has been investigated for highly efficient Eu-doped GaN phosphor embedded in KBr–GaN:Eu³⁺ composite. Fairly good radiation damage resistance was obtained for 1.7 × 10¹² to 5 × 10¹³ cm^?2 oxygen fluence. Preliminary data indicate that Eu-doped GaN powder phosphor can be considered for devices in a radiation environment.     

Luminescent properties and energy transfer of double-emitting NaSrPO4:Eu2+,Tb3+ phosphor for near-UV white LEDs

Novel blue/green NaSrPO₄ phosphors co-doped with Eu²⁺ and Tb³⁺ were synthesized by a conventional solid-state reaction. Their luminescent properties were characterized by using powder X-ray diffraction, photoluminescence excitation and emission spectra, lifetime, and temperature dependent emission spectra, respectively. The NaSrPO₄:Eu²⁺,Tb³⁺,Na⁺ phosphor showed an intense broad excitation band between 250 and 430 nm, which was in agreement with the near-UV chip (350–420 nm), and it exhibited two dominating emission bands at 445 and 545 nm, corresponding to the allowed 4f⁶5d¹→4f⁷(⁸S_7/2) transition of Eu²⁺ ion and the ⁵D₄→⁷F₅ transition of Tb³⁺ ion, respectively. The emission intensity and lifetime of Eu²⁺ ion decreased with the increasing concentration of Tb³⁺ ion, which strongly indicated that an effective energy transfer occurred from Eu²⁺ to Tb³⁺ in NaSrPO₄ host. The principle of the energy transfer should be the combined effect of the non-radiative resonant energy transfer and the phonon-assisted non-radiative process.     

Luminescent properties of Eu2+and Dy3+ ions in Ba4Al2O7 phosphor for solid state lighting

In this paper we report the combustion synthesis of rare earth (RE=Eu, Dy) doped Ba₄Al₂O₇ phosphors. Prepared phosphors were characterized by X-ray powder diffraction (XRD), scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), CIE color co-ordinates and their photoluminescence (PL) properties were also investigated. In case of Ba₄Al₂O₇: Eu²⁺, the emission spectra show unique band centered at 495 nm, which corresponds to the 4f⁶5d¹→4f⁷ transition of Eu²⁺, and PL emission spectra of Dy³⁺ ion under 348 nm excitation give two bands centered at 478 nm (blue) and 575 nm (yellow), which originate from the transitions of ⁴F_9/2→⁶H_15/2 and ⁴F_9/2→⁶H_13/2 of Dy³⁺, respectively. The results indicate that the Eu²⁺ and Dy³⁺ activated Ba₄Al₂O₇ phosphor could find application in solid state lighting.     

Photoluminescence characterization of a novel red-emitting phosphor In2(MoO4)3:Eu3+ for white light emitting diodes

The red-emitting phosphor In₂(MoO₄)₃:Eu³⁺ with cubic crystal structure was synthesized by a conventional solid-state reaction technique and its photoluminescence properties were investigated. The prepared phosphor can be efficiently excited by ultraviolet (395 nm) and blue (466 nm) light. The emission spectra of the phosphor manifest intensive red-emitting lines at 612 nm due to the electric dipole ⁵D₀→⁷F₂ transitions of Eu³⁺. The chromaticity coordinates of x=0.63, y=0.35 (λ_ex=395 nm) and x=0.60, y=0.38 (λ_ex=466 nm) are close to the standard of National Television Standard Committee values (NTSC) values. The concentration quenching of In₂(MoO₄)₃:Eu³⁺ is 40 mol% and the concentration self-quenching mechanism under 466 nm excitation was the dd intereaction. As a result of the strong emission intensity and good excitation, the phosphor In₂(MoO₄)₃:Eu³⁺ is regarded as a promising red-emitting conversion material for white LEDs.     

Preparation and photoluminescence properties of the Sr1.56Ba0.4SiO4:0.04Eu2+ phosphor

The Sr_1.56Ba_0.4SiO₄:0.04Eu²⁺ phosphors were prepared via a combustion reaction and following the calcination method at low temperature. The influences of the amount of the uncommonly used SrCl₂ flux, different calcination temperatures and time on the structure and the photoluminescence (PL) properties of the phosphors were investigated. Under the excitation of 450 nm blue light, the phosphor shows the intense broad emission band from 490 nm to 650 nm, and the emission peak is centered at 553 nm. The luminescence intensity of Sr_1.56Ba_0.4SiO₄:0.04Eu²⁺ was very sensitive to the crystallinity and morphology characteristics of the phosphor. The phosphor calcined at 950 °C for 3 h in 20%H₂/80%Ar atmosphere exhibits improved PL properties due to its high crystallinity and excellent morphology characteristics. The use of the SrCl₂ flux provides a novel way to improve the crystallinity of the silicates phosphors at low preparation temperature.     

The VUV–vis luminescent properties of NaYFPO4: Dy3+ phosphor

Dy³⁺-doped monoclinic NaYFPO₄ phosphor has been synthesized by solid-state reaction technique. Its photoluminescence in the vacuum ultraviolet (VUV)-visible region was investigated. The most intensity broadband emission centered at about 171 nm was the host-related absorption. Another broadband at 153 nm could be related to the O₂→Dy³⁺ charge transfer band (CTB) absorption. The excitation peaks located at 178 nm and 256 nm were the spin-allowed (SA) and spin-forbidden (SF) f–d transitions of Dy³⁺, respectively. Some sharp lines in the range of 280–500 nm were due to the f–f transitions of Dy³⁺ within its 4f⁹ configuration. Under the VUV–vis excitation, the Dy³⁺-doped NaYFPO₄ phosphor showed the characteristic emissions of Dy³⁺ (⁴F_9/2→⁶H_15/2 transitions and ⁴F_9/2→⁶H_13/2 transitions) with a stronger blue emission peaking at about 485 nm. All the chromaticity coordinates of the sample were in the near cold-white region. It can be predicted that this phosphor can be applied in both mercury-free luminescence lamps and white LED.     

Effect of Na+ co-dopant and activator concentration on luminescent properties of CaGa4O7:Eu3+

Two series of calcium gallate phosphors: Ca_1?xEu_xGa₄O₇ and Ca_1?2xEu_xNa_xGa₄O₇ (x=0, 0.002, 0.01, 0.02, 0.03, 0.05) were synthesized by a modified Pechini method and their optical properties at 298 and 77 K were investigated. In undoped CaGa₄O₇ upon 255 nm excitation a bluish white emission (λ_max=500 nm) followed by an afterglow of the same color lasting for 10–20 s was observed. Eu³⁺-doping quenched the host-related luminescence and the characteristic red emission of the dopant with maximum at 613 nm appeared. Its excitation spectrum consisted of a broad band assigned to ligand to metal, O^2?→Eu³⁺, charge transfer absorption and narrow lines arising from intraconfigurational transitions within the 4f⁶ states of Eu³⁺ ion. The effects of Eu³⁺ concentration and Na⁺ co-doping on the luminescence properties and decay kinetics were studied. Low temperature emission spectra showed that Eu³⁺ ions are positioned in environments of different symmetries. Their relative populations changed with the activator content. Co-doping with Na⁺ ions led to a remarkable reduction of the number of Eu³⁺ sites as well as to noticeable improvement of the luminescence brightness though it did not affect the decay time of the emission. The quantum efficiencies of singly doped CaGa₄O₇:Eu³⁺ were very low (in the range of 1–3.7%). Na⁺ co-doping improved this parameter leading to the highest efficiency of 11% for CaGa₄O₇:3%Eu³⁺,3%Na⁺.     

Photoluminescence properties of color-tunable SrMgAl10O17:Eu2+,Mn2+ phosphors for UV LEDs

Aluminate phosphors SrMgAl₁₀O₁₇ codoped with Eu²⁺ and Mn²⁺ ions were prepared by solid-state reaction. The phase structure and photoluminescence properties of the as-prepared phosphors were characterized by powder X-ray diffraction, photoluminescence excitation and emission spectra. Upon excitation of UV light, two broad emission bands centered at 470 and 515 nm were observed, and they were assigned to Eu²⁺ and Mn²⁺ emissions, respectively. The emission color of the phosphors can be tuned from blue to cyan and finally to green by adjusting the concentration ratios of Eu²⁺ and Mn²⁺. Effective energy transfer occurs from Eu²⁺ to Mn²⁺ in the host due to the spectral overlap between the emission band of Eu²⁺ and the excitation bands of Mn²⁺. The energy transfer mechanism was demonstrated to be electric dipole–quadrupole interaction. The energy transfer efficiency and critical distance were also calculated. The phosphors exhibit strong absorption in near UV spectral region and therefore they are potentially useful as UV-convertible phosphors for white LEDs.     

Crystal growth,luminescence and scintillation properties of Eu2+:CeBr3 crystals

Eu²⁺:CeBr₃ crystals were grown by vertical Bridgman growth method and slight aliovalent doping of Eu²⁺ in the CeBr₃ crystal did not change the crystal structure. The X-ray stimulated luminescence, photoluminescence, decay kinetics and scintillation properties were investigated at room temperature. The X-ray stimulated luminescence spectra exhibited wide broad emission bands from 3.54 eV to 2.95 eV in the Eu²⁺:CeBr₃ crystal with high content of 620 ppm of Eu²⁺, which were the overlap of the emission bands ascribed to 5d → 4f transition of Ce³⁺ and 4f⁶5 d¹ → 4f⁷ transition of Eu²⁺, respectively. When the content of Eu²⁺ was decreased to 70 ppm, another emission band centered at 2.29 eV was observed. The photoluminescence spectra showed the energy transfer from Ce³⁺ to Eu²⁺. This decreased the Ce³⁺ emission intensity but enhanced the Eu²⁺ emission intensity. The photoluminescence decay time of Ce³⁺ emission decreased from 14 ns to 10 ns when the content of Eu²⁺ increased from 70 ppm to 620 ppm. The decay time of the emission of 525 nm did not change with the excitation wavelength and Eu²⁺ content, which could be assigned to the excitons that were bound on Eu²⁺ related centers. The light output of the Eu:CeBr₃ crystal under the excitation of ²⁴¹Am radioactive source was less than 20.2% of Tl:NaI crystal.     

Synthesis and photoluminescence properties of YVO4:Eu3+, Al3+ phosphor

The Y_0.95?xAl_xVO₄:5%Eu³⁺ (0≤x≤0.1) phosphors were successfully synthesized by solid state reaction at 900 °C for 6 h, and their luminescence properties were investigated under UV and VUV excitation. Monitoring at 619 nm, a strong broad absorption was enhanced by co-doping of Al³⁺ into the YVO₄:Eu³⁺ lattices at 256 nm under UV excitation. The VUV excitation spectra also showed the enhanced excitation bands at about 156 and 200 nm. Under 254 or 147 nm excitation, it was found that Y_0.95?xAl_xVO₄:Eu³⁺(0≤x≤0.1) phosphors showed strong red emission at about 619 nm corresponding to the electric dipole ⁵D₀^–7F₂ transition of Eu³⁺. The improvement of luminescence intensity of YVO₄:Eu³⁺ was also observed after partial substituting Y³⁺ by Al³⁺ and the optimal luminescence intensity appeared with incorporation of 2.5 mol% Al³⁺.