Clustered and integrated fluorescence spectra from single atmospheric aerosol particles excited by a 263- and 351-nm laser at New Haven,CT, and Adelphi,MD

Fluorescence spectra from individual micron-sized atmospheric aerosol particles were measured by a Dual-wavelength-excitation Particle Fluorescence Spectrometer (DPFS). Particles were drawn into our laboratory at Adelphi, MD, an urban site in the Washington, DC, metroplex and within the Yale University campus at New Haven, CT. Two fluorescence spectra were obtained for every individual particle as it was moving through the DPFS system and excited sequentially by single laser pulses at 263 and 351 nm. There were around ten to a few hundred particles detected per second and up to a few million per day within the 1–10 μm particle size range. The majority of the particles have weak fluorescence, but 10–50% of the particles have fluorescence signals above the noise level at both sites at different time period. For the first time, these Ultra Violet laser-induced-fluorescence (UV-LIF) spectra from individual particles were integrated every 10 min, which forms a group of about a few thousand to a few tens of thousand particles, to provide the averaged background atmospheric fluorescence spectral profiles which may be helpful in the development of bioaerosol detection systems, particularly those systems based on integrated fluorescence from a group of aerosol particles, such as Light Detection And Rangeing (LIDAR) remotor biosensor and the point sensor based on collected particles on substrate. These integrated spectral profiles had small variations from time to time and were distinguishable from that of the bacterial simulant B. subtilis. Also for the first time, the individual spectra excited by a 351 nm laser were grouped using unstructured hierarchical cluster analysis, with parameters chosen so that spectra clustered into 8 main categories. They showed less spectral variations than that excited by a 263-nm laser. Over 98% of the spectra were able to be grouped into 8 clusters, and over 90% of the fluorescent particles were in clusters 3–5 with a fluorescence emission peak around 420–470 nm; these were mostly from biological and organic carbon-containing compounds. Integrated fluorescence spectral profiles and averaged spectra for each cluster show high similarity between New Haven, CT and Adelphi, MD.     

Highly efficient and stable organic light-emitting diode by balancing drift current of charge

Highly efficient and stable OLED device in which hole-drift current and electron-drift current are balanced was fabricated. Drift current characteristics according to the thickness of organic layer were examined using the device with ITO/m-MTDATA/NPB/Al structure that can only move the hole and the device with Al/LiF/Alq₃/LiF/Al structure that can only move the electron. Using the result of such examination, green device with balanced drift current was produced. Device with the structure of m-MTDATA (80 nm)/NPB (20 nm)/C-545T (3%) doped Alq₃ (5 nm)/Alq₃ (59 nm)/LiF (1 nm)/Al (200 nm) showed color purity of (0.309, 0.643) and high efficiency of 7.0 lm/W (14.4 cd/A). Most of light emission was observed inside the green emitting layer. Through the result of EL spectrum for the device also including red emitting layer, same result could be obtained. The device with balanced drift current also showed half life-time of 175 h for initial luminance of 3000 cd/m², which is more stable in comparison to the device without balanced drift current.     

H2 splitting on Pt,Ru and Rh nanoparticles supported on sputtered HOPG

The equilibrium hydrogen exchange rate between adsorbed and gas phase hydrogen at 1 bar is measured for Pt, Ru and Rh nanoparticles supported on a sputtered HOPG substrate. The particles are prepared by Electron Beam Physical Vapor Deposition and the diameter of the particles varies between 2 and 5 nm. The rate of hydrogen exchange is measured in the temperature range 40–200 °C at 1 bar, by utilization of the H–D exchange reaction. We find that the rate of hydrogen exchange increases with the particle diameter for all the metals, and that the rate for Ru and Rh is higher than for Pt. In the case of Pt, the equilibrium dissociative sticking probability, S, is found to be nearly independent of particle diameter. For Ru and Rh, S is found to depend strongly on particle diameter, with the larger particles being more active. The apparent energy of desorption at equilibrium, E_app, shows a dramatic increase with decreasing particle diameter for diameters below 5 nm for Ru and Rh, whereas E_app is only weakly dependent on particle diameter for Pt. We suggest that the strong variation in the apparent desorption energy with particle diameter for Ru and Rh is due to the formation of compressed hydrogen adlayers on the terraces of the larger particles. Experiments are also carried out in the presence of 10 ppm CO. Pt is found to be very sensitive to CO poisoning and the H–D exchange rate drops below the detection limit when CO is added to the gas mixture. In the case of Ru and Rh nanoparticles, CO decreases the splitting rate significantly, also at 200 °C. The variation of the sensitivity to CO poisoning with particle diameter for Ru and Rh is found to be weak.     

RGB tricolor produced by white-based top-emitting organic light-emitting diodes with microcavity structure

RGB pixels by microcavity top-emitting organic light-emitting diode (TOLED) is beneficial to both minimizing the loss of light and improving the color purity and the efficiency. Based on the multi-emitting layers, white organic light-emitting diodes (OLEDs) and microcavity TOLEDs were prepared. TOLEDs were fabricated using Ag/ITO as the reflector and adjusting layer, Al/Ag as semi-transparent cathode, Alq:DCJTB/TBADN:TBPe/Alq:C545 as white light emitting layer. By adjusting the thickness of ITO, optical length of cavity and the color of the device have been changed. So we get RGB tricolor devices. The peak wavelengths are 476 nm, 539 nm, 601 nm, Commission Internationale d’Eclairage (CIE) coordinates are (0.133, 0.201), (0.335, 0.567), (0.513, 0.360), FWHM are 32 nm, 50 nm, 73 nm for blue, green and red, respectively.     

The effect of Ag layer thickness on the properties of WO3/Ag/MoO3 multilayer films as anode in organic light emitting diodes

Transparent conductive WO₃/Ag/MoO₃ (WAM) multilayer electrodes were fabricated by thermal evaporation and the effects of Ag layer thickness on the optoelectronic and structural properties of multilayer electrode as anode in organic light emitting diodes (OLEDs) were investigated using different analytical methods. For Ag layers with thickness varying between 5 and 20 nm, the best WAM performances, high optical transmittance (81.7%, at around 550 nm), and low electrical sheet resistance (9.75 Ω/cm²) were obtained for 15 nm thickness. Also, the WAM structure with 15 nm of Ag layer thickness has a very smooth surface with an RMS roughness of 0.37 nm, which is suitable for use as transparent conductive anode in OLEDs. The current density?voltage?luminance (J?V?L) characteristics measurement shows that the current density of WAM/PEDOT:PSS/TPD/Alq₃/LiF/Al organic diode increases with the increase in thickness of Ag and WO₃/Ag (15 nm)/MoO₃ device exhibits a higher luminance intensity at lower voltage than ITO/PEDOT:PSS/TPD/Alq₃/LiF/Al control device. Furthermore, this device shows the highest power efficiency (0.31 lm/W) and current efficiency (1.2 cd/A) at the current density of 20 mA/cm², which is improved 58% and 41% compared with those of the ITO-based device, respectively. The lifetime of the WO₃/Ag (15 nm)/MoO₃ device was measured to be 50 h at an initial luminance of 50 cd/m², which is five times longer than 10 h for ITO-based device.     

Determination of rifampicin based on fluorescence quenching of GSH capped CdTe/ZnS QDs

Aqueous glutathione (GSH)-capped CdTe/ZnS QDs with the diameter of 3–4 nm were synthesized. The fluorescence of CdTe/ZnS QDs at 577 nm was quenched in the presence of rifampicin (Rfp), with excitation wavelength at 350 nm. The mechanism of the interaction of CdTe/ZnS QDs with Rfp was investigated. Under the optimal conditions, the calibration plot of ln(F₀/F) was linear in the range 0.83–56 μg mL^?1 with concentration of Rfp, and the detection limit was 0.25 μg mL^?1. The proposed method was successfully applied to the determination of Rfp in its commercial capsules, and satisfactory results were obtained. The recovery of the method was in the range 98.6–103.2%.     

Growth of SnO2 nanoparticles via thermal evaporation method

Tin oxide (SnO₂) nanoparticles were fabricated by evaporation of Sn powers at 1000 °C in air pressure. The as-deposited SnO₂ particles were single crystal structure, which were mostly spherical shape, the diameter of particles was ranging from 200 to 600 nm. The photoluminescence (PL) spectrum showed that a sharp emission peak at around 393 nm with the excitation wavelength at 325 nm, which suggested possible applications in nanoscaled optoelectronic devices. It was also found that the holding time affects the morphology of the products. The formation mechanism of SnO₂ particles was discussed.     

Experimental investigation on charging characteristics and penetration efficiency of PM2.5 emitted from coal combustion enhanced by positive corona pulsed ESP

The electrostatic precipitator (ESP) has been extensively used for collecting aerosol particles emitted from coal combustion, but its collection efficiency of PM2.5 (Particulate matter whose aerodynamic diameter is less than 2.5 μm) is relatively low due to insufficient particle charging. The positive pulsed ESP is considered to enhance particle charging and improve collection efficiency. A laboratory-scale pulsed ESP with wire-plate electrode configuration was established to investigate the particle charging and penetration efficiency under controlled operating conditions of different applied impulse peak voltages, impulse frequencies, dust loadings and residence times. The results show that most particles larger than 0.2 μm are negatively charged, while most particles smaller than 0.2 μm are positively charged. For a given operating condition, the particle penetration efficiency curve has the highest penetration efficiency for particles with a diameter near 0.2 μm, and there is always a negative correlation between the particle penetration efficiency and the average number of charges per particle. Under the same operating conditions, the particle penetration efficiency decreases with increasing impulse peak voltage and impulse frequency, but increases as the dust loading increases. The results imply that residence time of 4 s is optimum for particle charging and collection. PM2.5 number reduction exceeding 90% was achieved in our pulsed ESP.     

AFM study of a SiC film grown on Si(1 0 0) surface using a C2H4 beam

A 3C-silicon carbide (SiC) thin film grown on a Si(1 0 0) surface using an ethylene (C₂H₄) molecular beam has been studied by atomic force microscopy. At the center of the irradiation area of the ethylene beam, the shape of the SiC islands was rectangular, the average length of which was 74.5 nm and the average height was 13.1 nm. Each SiC island consists of the SiC particles with the average diameter of 17 nm. Just inside of the boundary region of the beam irradiation, the average size and height of the islands decreased to 50.1 and 8.2 nm, respectively. Just outside of the boundary region, the average size and height decreased to 17.7 and 5.1 nm, respectively. The average reaction probabilities at the above three points were estimated to be 0.14, 0.27 and 2.7%, respectively. New growth mode of the crystal growth is proposed (particles gathering island mode).     

Ultrasonic treatment of glassy carbon for nanoparticle preparation

Glassy carbon particles (millimetric or micrometric sizes) dispersions in water were treated by ultrasound at 20 kHz, either in a cylindrical reactor, or in a “Rosette” type reactor, for various time lengths ranging from 3 h to 10 h. Further separations sedimentation allowed obtaining few nanoparticles of glassy carbon in the supernatant (diameter <200 nm). Thought the yield of nanoparticle increased together with the sonication time at high power, it tended to be nil after sonication in the cylindrical reactor. The sonication of glassy carbon micrometric particles in water using “Rosette” instead of cylindrical reactor, allowed preparing at highest yield (1–2 wt%), stable suspensions of carbon nanoparticles, easily separated from the sedimented particles. Both sediment and supernatant separated by decantation of the sonicated dispersions were characterized by laser granulometry, scanning electron microscopy, X-ray microanalysis, and Raman and infrared spectroscopies. Their multiscale organization was investigated by transmission electron microscopy as a function of the sonication time. For sonication longer than 10 h, these nanoparticles from supernatant (diameter <50 nm) are aggregated. Their structures are more disordered than the sediment particles showing typical nanometer-sized aromatic layer arrangement of glassy carbon, with closed mesopores (diameter ∼3 nm). Sonication time longer than 5 h has induced not only a strong amorphization (subnanometric and disoriented aromatic layer) but also a loss of the mesoporous network nanostructure. These multi-scale organizational changes took place because of both cavitation and shocks between particles, mainly at the particle surface. The sonication in water has induced also chemical effects, leading to an increase in the oxygen content of the irradiated material together with the sonication time.     

Ultrasound-assisted copper deposition on a polymer membrane and application for methanol steam reforming

Copper particles were electrolessly deposited on a palladium aerosol activated polymer membrane in the presence of ultrasound. An application of ultrasound introduced a faster deposition (220 μg min^?1 in deposition rate) and finer copper particles (9 nm in crystallite size) than those (11 and 41 μg min^?1; 27 and 32 nm) in the absence of ultrasound (i.e. respectively 20 and 45 °C in bath temperature with mechanical agitation). A better performance of methanol steam reforming (0.59 in mean conversion during 5 h operation; 1.3 and 1.6 times respectively higher than those from 20 to 45 °C cases) at a 300 °C reaction temperature was materialized for the ultrasound application, probably due to a finer (i.e. a more textured) copper particle deposition on a polymer membrane.     

Photocatalytic degradation of ciprofloxacin drug in water using ZnO nanoparticles

We report the synthesis of nanostructure ZnO semiconductor with ～2.1 nm diameter using a chemical precipitation method. The resulting nanoparticles were characterized by X-ray diffraction analysis (XRD), Fourier-transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The optical properties were investigated by UV–vis and fluorescence techniques. The absorption spectra exhibit a sharp absorption edge at ～334 nm corresponding to band gap of ～3.7 eV. The fluorescence spectra displayed a near-band-edge ultraviolet excitonic emission at ～410 nm and a green emission peak at ～525 nm, due to a transition of a photo-generated electron from the conduction band to a deeply trapped hole. The photocatalytic activity of the prepared ZnO nanoparticles has been investigated for the degradation of ciprofloxacin drug under UV light irradiation in aqueous solutions of different pH values. The results showed that the photocatalytic degradation process is effective at pH 7 and 10, but it is rather slow at pH 4. Higher degradation efficiency (～50%) of the drug was observed at pH 10 after 60 min. Photodegradation of the drug follows a pseudo-first-order kinetics.     

Magnetic behaviour of arrays of Ni nanowires by electrodeposition into self-aligned titania nanotubes

Arrays of Ni nanowires electrodeposited into self-aligned and randomly disordered titania nanotube arrays grown by anodization process are investigated by X-ray diffraction, SEM, rf-GDOES and VSM magnetometry. The titania nanotube outer diameter is about 160 nm, wall thickness ranging from 60 to 70 nm and 300 nm in depth. The so-obtained Ni nanowires reach above 100 nm diameter and 240 nm length, giving rise to coercive fields of 98 and 200 Oe in the perpendicular or parallel to the nanowires axis hysteresis loops, respectively. The formation of magnetic vortex domain states is also discussed.     

Synthesis of nickel nanoparticles supported on hollow samaria-doped ceria particles via the solution-spray plasma technique: Anode catalysts for SOFCs

Aiming at SOFC anode applications, we have synthesized nanometer-sized nickel catalysts supported on hollow spherical particles of samaria-doped ceria (Ni/SDC) by spraying a mixed solution of nickel, samarium, and cerium nitrates into an atmospheric pressure plasma. The as-prepared particles consisted of SDC (average diameter d_SDC = ca. 0.8 µm) and uniformly dispersed nanometer-sized NiO particles. When reduced in H₂ at 800 °C or 1000 °C, Ni nanoparticles (average diameter d_Ni = 34 nm) were found to be embedded uniformly into the SDC surface.     

Synthesis of Ag-deionized water nanofluids using multi-beam laser ablation in liquids

Multi-pulse laser ablation of silver in deionized water was studied. The laser beams were arranged in a cross-beam configuration. In our experiments, two single-mode, Q-switched Nd-Yag lasers operating at 1064 nm, pulse duration of 5.5 ns and 10 Hz rep rate were used. The laser fluence of the second beam was 0.265 J/cm² for all tests. Two levels of the laser fluences were used for the ablating beam: 0.09 and 0.265 J/cm² (11,014 and 33,042 J/cm² at the focal point, respectively). The silver target was at 50 mm from the cell window and 10 mm deep. The second beam was aligned parallelly with the silver target and focused at 2 mm in front of the focal point of the ablating beam. For all cases, the delay time between the ablating beam and the cross-beam was 40 μs. In general, the ablated particles were almost all spherical. For fluence of 0.09 J/cm ² and single-beam approach, the mean particle size was about 29 nm. The majority of the particles, however, were in 19–35 nm range and there were some big ones as large as 50–60 nm in size. For double-beam approach, the particles were smaller with the average size of about 18 nm and the majority of the particles were in 9–21 nm range with few big one as large as 40 nm. For the beam fluence of 0.265 J/cm² and single-beam configuration, the particle sizes were smaller, the mean particles size was about 18 nm and the majority of the particles were in the range of 10–22 nm with some big one as large as 40 nm. For double-beam approach, the mean particle size was larger (24.2 nm) and the majority of the particle were distributed from 14 to 35 nm with some big particles can be found with sizes as big as 70 nm. Preliminary measurements of the thermal conductivity and viscosity of the produced samples showed that the thermal conductivity increased about 3–5% and the viscosity increased 3.7% above the base fluid viscosity even with the particle volume concentration as low as 0.01%.     

Marine environment compatible antireflection coating with nanotop layer on silicon optics

Antireflection coating on silicon optics have crucial importance in thermal device working in 3.6–4.9 μm wavelength region. When the thermal device is used in marine environment, the optics face harsh saline weather condition compared to normal field environment. This deteriorates coated optics and to improve mechanical strength of the coating, a nanotop layer on the antireflection coating has been developed. In this paper a study has been carried out to improve marine environment compatibility by employing a nanolayer on the top of antireflection coating on silicon optics. Optimac synthesis method was used to design the multilayer stack on the substrate with germanium and IR-F625 as high/low refractive index respectively and the layer number was restricted to four layers. The top nanolayer was 60 ± 2 nm thick hafnium dioxide layer developed with ion assisted deposition (End–Hall) on the optics during coating process. The deposition of multilayer coating was carried out inside the coating plant fitted with cryo pump and residual gas analyzer. The evaporation was carried out at high vacuum (2–6 × 10⁻⁶ mbar) using electron beam gun and layer thicknesses were measured with crystal monitor. The average transmission achieved was 97% in the spectral band of 3.6–4.9 μm with a hardness of 9.7 GPa on the coated optics.     

A proposed organic Schottky barrier photodetector for application in the visible region

The fabrication and characterization of an organic photodetector (OPD) in the form of ITO coated glass/polycarbazole (PCz)/Al Schottky contact is reported. The device has been fabricated in our laboratory for the first time using the polymer synthesized by us. The device has been subsequently characterized in respect of electrical and optical properties in order to explore its potential for possible use as a detector in the visible region at 650 nm. It is observed that the detector exhibits a reasonably high value of peak detectivity (∼6 × 10⁶ cm Hz^1/2 W⁻¹) near zero bias voltage at V = 0.2 V.     

Numerical analysis of a direct UV-written 1 × 8 double smooth octagon microrings resonant wavelength demulti/multiplexer

A microring resonant wavelength demulti/multiplexer (MRRWDM) based on UV-written technology is designed. By using a double smooth octagon microrings structure, a 1 × 8 device around the central wavelength of 1550.918 nm with the wavelength spacing of 1.4 nm is presented. Analytical results based on coupled mode theory show that the 3 dB bandwidth is about 0.22 nm, the insertion loss is less than 0.7 dB, and the crosstalk is below ?47 dB for every output channel of the designed device without tolerances.     

Novel optical add-drop multiplexer based on dual racetrack resonators

In this paper, we designed and fabricated a four-channel optical add-drop multiplexer (OADM) based on dual racetrack resonators. The size of the fabricated device is only 2400 μm × 500 μm. The fabricated device can effectively and perfectly realize the signals upload and download. The free spectral range (FSR) of OADM is about 15.2 nm. We take the spectral responses near 1555 nm as an example. When the device acts as an optical drop multiplexer, the minimum insertion loss is 4.481 dB and the maximum extinction ratio is 31.931 dB. The maximum adjacent channels crosstalk is -9.845 dB. When the device acts as an optical add multiplexer, the minimum insertion loss is 0.944 dB and all of the extinction ratios are bigger than 25 dB. The maximum crosstalk is -16.531 dB which indicates the crosstalk can be neglected.     

An organic electroluminescent device made from a gadolinium complex

A gadolinium ternary complex, tris(1-phenyl-3-methyl-4-isobutyryl-5-pyrazolone) (phenanthroline) gadolinium [Gd(PMIP)₃(Phen)] was synthesized and used as a light emitting material in the organic electroluminescent (EL) devices. The triple layer device with a structure of indium tin oxide (ITO)/N,N′-diphenyl-N,N′-bis(3-methylphenyl)-1,1′-biphenyl-4,4′-diamine (TPD) (20 nm)/Gd(PMIP)₃(Phen) (80 nm)/2, 9-dimethyl-4, 7-diphenyl-1, 10-phenanthroline (bathocuproine or BCP) (20 nm)/Mg: Ag(200 nm)/Ag(100 nm) exhibited green emission peaking at 535 nm. A maximum luminance of 230 cd/m² at 17 V and a peak power efficiency of 0.02 lm/w at 9 V were obtained.