首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到19条相似文献,搜索用时 109 毫秒
1.
非对称金属包覆左手介质平板波导的微扰分析   总被引:1,自引:0,他引:1  
基于微扰方法分析非对称金属包覆左手介质平板波导的特性,给出了该波导的复有效折射率的一级近似解,并对波导的传输特性和损耗特性进行了数值模拟.结果表明:非对称金属包覆左手介质平板波导没有零阶模式;TE1模传播系数随波导厚度的增加迅速减小,损耗系数随波导厚度的增加快速增加,达到最大值后又迅速减小;非对称金属包覆左手介质平板波导传输特性相对于左手介质三层平板波导传输特性发生了很大改变,TM1模,TM2和 TE2模式以及更高阶模式在截止厚度附近出现双值现象;特别在二阶及高阶模式中,TE模式相对于TM模式具有高传输低损耗的特性,而以右手介质为芯层的金属包覆波导不具有这一特性.  相似文献   

2.
周骏  任海东 《光子学报》2014,38(9):2219-2223
基于微扰方法分析非对称金属包覆左手介质平板波导的特性,给出了该波导的复有效折射率的一级近似解,并对波导的传输特性和损耗特性进行了数值模拟.结果表明:非对称金属包覆左手介质平板波导没有零阶模式|TE1模传播系数随波导厚度的增加迅速减小,损耗系数随波导厚度的增加快速增加,达到最大值后又迅速减小|非对称金属包覆左手介质平板波导传输特性相对于左手介质三层平板波导传输特性发生了很大改变,TM1模,TM2和 TE2模式以及更高阶模式在截止厚度附近出现双值现象|特别在二阶及高阶模式中,TE模式相对于TM模式具有高传输低损耗的特性,而以右手介质为芯层的金属包覆波导不具有这一特性.  相似文献   

3.
左手介质矩形波导导模和表面模的场分布   总被引:2,自引:0,他引:2  
从麦克斯韦方程组出发,结合电磁场的边界条件,推导出介质矩形波导导模的一般色散方程.对普通介质矩形波导和左手介质矩形波导的导模场分布分别进行了数值模拟.通过对比两种介质矩形波导的导模场分布的模拟结果,发现左手介质矩形波导Ex22模的场分布比普通介质波导Ex00模的场更集中在波导中部.同时,根据处理普通介质矩形波导的Marcatili方法.类比得到左手介质矩形波导表面模的色散方程,并数值模拟了低阶模的场分布,结果表明,能量主要集中在波导的四个角区以及波导的边缘.  相似文献   

4.
含单负材料的不对称平板波导的传导模   总被引:2,自引:0,他引:2  
陈宪锋  蒋美萍  沈小明  金铱 《光学学报》2008,28(10):1888-1892
利用图解法系统地研究了由不同类型的单负材料作为包层的三层平板波导的模式特征.研究表明单负介质波导具有一系列奇异的特性,与传统介质波导或左手介质波导相比,此波导的芯区横向振荡导模的模折射率范围较大.除0阶导模外,其它TE,TM导模均为芯区横向振荡模,且同阶的TE、TM模的色散曲线几乎重合,只有0阶的TE,TM模才可以支持表面波的传播.单负介质的结构参数对0阶导模的影响较大.一定条件下,波导中可以出现0阶导模的完伞缺失或仅支持表面波的传输,还会出现超慢波现象,甚至可以共生都是后向波的0阶双模.  相似文献   

5.
金属包层对称平面单轴晶体波导的模式场(Ⅱ)   总被引:1,自引:0,他引:1       下载免费PDF全文
郭旗  石智伟 《物理学报》2002,51(8):1716-1723
对于晶体光轴平行于波导界面的结构,讨论了光在金属包层对称平面单轴晶体波导(波导层是单轴晶体,两个波导界面均为金属)内的传输特性.解析地得到了这种结构下波导模式场的精确解.模式场的性质因单轴晶体的性质不同而异.对于正单轴晶体,波导的主模是横电波,任何频率的光波均可激励该模式;当频率满足一定条件时,波导内传输单模,否则,将激励起高阶模式.高阶模既非TE波,也非TM波,而是两者耦合而成的混合模.对于负单轴晶体,波导的主模是一种混合模,该模式同样可被任何频率的光波所激励;当频率满足一定条件时,波导内传输单模,否则 关键词: 平面金属波导 单轴晶体 模式场 混合模  相似文献   

6.
转移矩阵法在负折射率介质材料平板波导中的应用研究   总被引:3,自引:3,他引:0  
肖丙刚  韩张华  何金龙 《光子学报》2006,35(10):1484-1487
利用严格电磁理论,推导出了适用于负折射率介质材料光波导的转移矩阵,分析讨论了转移矩阵的性质和应用.利用转移矩阵方法,推导出导波层为负折射率介质材料、覆盖层和衬底为右手材料的三层对称介质光波导的本征色散方程.用图解法研究了负折射率介质波导中TE波的异常色散特性.在负折射材料介质波导中没有零阶模,最低阶为1阶模,并且有截止频率,只有波导参量满足一定条件的时候才会存在,导模的横向波数可以为实数和纯虚数,而正折射率介质波导导模的横向波数只能为实数.  相似文献   

7.
左手介质椭圆光波导基模传播特性   总被引:1,自引:0,他引:1  
熊天信  杨儒贵 《光子学报》2006,35(7):1099-1102
在椭圆柱坐标系中,采用分离变量方法,得出了左手介质椭圆光波导本征方程的近似解,通过数值计算,分析了椭圆波导偏心率、左手介质的电容率、磁导率对椭圆光波导基模传播特性的影响,并将左介质光波导与右手介质光波导基模特性进行对比,得出左手介质光波导的基模特性与右手介质光波导基模特性差别不大的结论.  相似文献   

8.
陈宪锋  沈小明  蒋美萍  金铱 《物理学报》2008,57(6):3578-3582
系统研究了负μ材料(MNG)作为包层的对称三层平板波导的传输特性. 研究发现,这种波导既支持快波的传播,又支持TE0,TE1模式的慢波传输. 其模式特性不同于左手介质波导和传统介质波导,导模存在的模折射率范围要比它们的大. MNG波导的TE0快波模缺失,且TEm模(m>1)的传播常数大于TMm模的传播常数. TEm模具有双模特征,且与波导的结构参数密切相关,导致波导中的净能流出现负值. 关键词: 单负介质 平板波导 快波与慢波 传播常数  相似文献   

9.
含左手材料对称三层平板空气波导的模式特性   总被引:3,自引:1,他引:2  
研究了左手材料作为衬底及覆盖层的对称三层平板空气波导的传输特性.快波和慢波都可以在这种波导中传播.快波不存在基模模式,只有0阶和1阶的TE或TM模才会出现慢波.当左手材料的相对介电常量和相对磁导率相等时,TE、TM模式完全简并,当其相异时简并消除.可以存在同阶模式的双传播模.  相似文献   

10.
本文基于光波在宇称时间对称波导中传输的理论模型,数值研究各阶亮孤子在罗森莫尔斯势宇称时间对称波导中的传输特性。宇称时间对称波导的折射率分布对光具有线性聚焦作用,而增益/损耗分布可以引起光束能量的横向流动。研究结果表明:当折射率调制深度为正时,一阶亮孤子在该波导中传输形成波浪形光束。当折射率调制深度为负时,一阶亮孤子分裂形成两束光,一束光发生弥散,另一束光以一定的速度向前传输,而增益/损耗调制深度会影响分裂后光束的传输行为;二阶亮孤子在较低的增益/损耗调制深度下传输形成稳定的呼吸光束;三阶亮孤子在传输过程中出现光波周期分裂与会聚现象;四阶及其以上高阶亮孤子在该波导中都不能稳定传输。此研究结果可为宇称时间对称在光波导中的应用提供一定的理论依据。  相似文献   

11.
包含左手材料的四层平板波导中的光导模   总被引:3,自引:2,他引:1  
研究一个芯子层是左手材料,其他三层由传统材料构成的四层平板光波导系统,利用图解法对各种TE偏振的导波模式的解进行详细分析.研究表明,四层左手材料光波导既能支持振荡导模,也能支持表面导模,与三层左手材料光波导相比较,此四层波导的导波模式呈现一些新的特性.对于中间传统材料层存在振荡场的情形:芯子层支持振荡导模的光波导中存在基模,并且高阶振荡导模出现模式缺失的性质;芯子层支持表面导模的光波导可以支持基模和多个高阶模式,并且存在模式兼并的性质.对于中间传统材料层存在衰减场的情形,此四层波导结构可等效为三层左手材料光波导.这些新的光波导传输性质对各种光波导器件的制作有潜在的应用价值.  相似文献   

12.
林惠川  蒲继雄 《中国物理 B》2012,21(5):54201-054201
Based on the ABCD matrix formalism,the propagation property of an Airy beam from right-handed material(RHM) to left-handed material(LHM) is investigated.The result shows that when the Airy beam propagates in the LHM,the intensity self-bending due to its propagation in the RHM can be compensated.In particular,if the propagation distance in the RHM is equal to that in the LHM and the refractive index of the LHM is n L =-1,the transverse intensity distribution of the Airy beam can return to its original state.  相似文献   

13.
The theory of step-index waveguides is well-established. Most practical slab waveguide structures have a graded-index profile. The basic properties of graded-index planar waveguide structures are similar to those of step-index waveguides with subtle differences. The most common types of graded-index slab waveguides are linearly and exponentially graded-index profiles. We here treat linearly graded-index slab waveguide. In this work, a three-layer waveguide structure with linearly graded-index film is considered. We assume three structures: the first structure comprises a left-handed material (LHM) cladding, the second structure contains a LHM substrate layer and the third has a LHM cladding and substrate. Closed-form expressions for electric and magnetic fields and the characteristic equation are derived. The three normalized parameters: the asymmetry coefficient (a), the normalized film thickness (V) and the normalized guide index (b) are used to study the dispersion properties of the proposed slab waveguide structure.  相似文献   

14.
We study guided modes propagating along a dielectric slab waveguide with a left handed material (LHM) cover or substrate. The dispersion relation is derived by using normalized waveguide parameters. An analytical method is then proposed to calculate the universal dispersion curves. Different from a slab waveguide with a LHM core, we find that guidance properties are strongly dependent on dielectric permittivity ε and magnetic permeability μ of the substrate and cover layers. For oscillating guided modes, fundamental zero order mode is not always absence, sometimes it exists in a restricted range of normalized propagation constant. First order mode behaves as other higher order modes and exists up to infinite high frequency. Higher order modes have no double degeneracy in the case of LHM cover layer. For surface guided modes, the existence and the type of the mode solutions with respect to different parameters are classified systematically and discussed in detail. Unlike a slab waveguide with a LHM core where the dispersion curve of TE1 surface mode continues with that of oscillating TE1 mode, the dispersion curve of TE1 surface mode continues with that of oscillating TE0 mode. It seems that the two different kinds of modes compensate each other to form one whole mode. Both TE and TM guided modes are discussed.  相似文献   

15.
Tingting Tang 《Optik》2013,124(24):6509-6511
We propose a polarization splitter (PS) based on the slow light effect in a three-layer waveguide that consists of left-handed material (LHM) and dielectric layers with no birefringence. Transverse electric (TE) and transverse magnetic (TM) waves can be split by the intrinsic configuration of permittivity and permeability of LHM and dielectric layers. Simulation results are given to discuss the influence of electromagnetic parameters on the properties of our PS, and the capture and release of TE or TM waves are also realized in our PS which provides a flexible method to modulate the switching of different polarization waves.  相似文献   

16.
A new dielectric slab waveguide with a left-handed material (LHM) cover and substrate is proposed. The dispersion relations and normalized effective thickness of the asymmetric LHM slab waveguide are investigated, in view of the normalized parameters. A number of unusual properties are found, for example, the fundamental and first-order modes do not exist and higher-order modes have double degeneracy. The propagation modes are absent at the low normalized frequency, and the cutoff frequencies of some LHM slab waveguide modes decrease with increase in the asymmetry measure. Unlike traditional slab waveguides, the V –H curves of the LHM slab waveguides are in one-to-one correspondence. Both TE and TM modes are discussed; in addition, the dispersion relations and normalized effective thicknesses of the TM modes are discussed in detail, when the difference in refractive indices of the film and the substrate is small. The results show that the region of mode coexistence taking place near the cutoff frequency becomes narrower with increase in the difference in refractive indices of the film and the substrate. The influence of this difference on the normalized effective thickness curves is different, and becomes smaller and smaller with increase in the value of the asymmetry measure, if different values of the refractive indices are employed.  相似文献   

17.
非线性左手材料的时域研究   总被引:1,自引:1,他引:1       下载免费PDF全文
 分析了非线性左手材料模型,推导了非线性左手材料中的时域有限差分法及完美匹配层的计算式。数值模拟了具有Kerr非线性效应的左手材料平板中的电磁波。观察到该材料同样具有电磁聚焦特性。对比线性左手材料,其聚焦点的幅度和位置都会发生偏移。同时改变波源的强度及其到平板边界距离,讨论了不同距离情况下该非线性左手材料平板对电磁波分布的影响。当波源距离材料平板足够远,通过非线性左手材料聚焦的电场强度几乎集中在其外表面。  相似文献   

18.
We proposed a three-layer waveguide as an optical sensor for homogeneous sensing applications. A guiding layer of the proposed structure is considered as lossy left-handed material (LHM) with simultaneously the complex negative electric permittivity ɛ and the complex negative magnetic permeability μ. We also assume a cladding layer to have an intensity-dependent refractive index. Sensitivity of the proposed optical waveguide sensor is derived and its dependence on different parameters of a waveguide is studied.  相似文献   

19.
Guided modes in asymmetric metal-cladding left-handed material waveguides   总被引:1,自引:0,他引:1  
We investigate guided modes in the asymmetric waveguide structure with a left-handed material (LHM) layer surrounded by air and metal. A graphical method is proposed to determine the guided modes. New properties of the oscillating and surface guided modes, such as absence of the fundamental mode, coexistence of the oscillating and surface guided modes, fast attenuation of the surface guided modes, and mode degeneracy, are analyzed in detail. We also investigate dispersive characteristics of the metal-LHM- air optical waveguide. The propagation constant increases with decreasing slab thickness for the first-order oscillating mode, which is different from that in traditional metal-cladding waveguides.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号