Adsorption structure of glycine on TiO2(1 1 0): A photoelectron diffraction determination

High-resolution core-level photoemission and scanned-energy mode photoelectron diffraction (PhD) of the O 1s and N 1s states have been used to investigate the interaction of glycine with the rutile TiO₂(1 1 0) surface. Whilst there is clear evidence for the presence of the zwitterion CH₂COO⁻ with multilayer deposition, at low coverage only the deprotonated glycinate species, NH₂CH₂COO is present. Multiple-scattering simulations of the O 1s PhD data show the glycinate is bonded to the surface through the two carboxylate O atoms which occupy near-atop sites above the five-fold-coordinated surface Ti atoms, with a Ti-O bondlength of 2.12 ± 0.06 Å. Atomic hydrogen arising from the deprotonation is coadsorbed to form hydroxyl species at the bridging oxygen sites with an associated Ti-O bondlength of 2.01 ± 0.03 Å. Absence of any significant PhD modulations of the N 1s emission is consistent with the amino N atom not being involved in the surface bonding, unlike the case of glycinate on Cu(1 1 0) and Cu(1 0 0).     

甲醛在金红石型TiO2(100)-(1×1)表面的光解离

We have investigated the photoinduced decomposition of formaldehyde (CH₂O) on a rutile TiO₂(100)-(1×1) surface at 355 nm using temperature-programmed desorption. Products, formate (HCOO^-), methyl radical (CH₃·), ethylene (C₂H₄), and methanol (CH₃OH) have been detected. The initial step in the decomposition of CH₂O on the rutile TiO₂(100)-(1×1) surface is the formation of a dioxymethylene intermediate in which the carbonyl O atom of CH₂O is bound to a Ti atom at the five-fold-coordinated Ti⁴⁺ (Ti_5c) site and its carbonyl C atom bound to a nearby bridge-bonded oxygen (O_b) atom, respectively. During 355 nm irradiation, the dioxymethylene intermediate can transfer an H atom to the O_b atom, thus forming HCOO^- directly, which is considered as the main reaction channel. In addition, the dioxymethylene intermediate can also transfer methylene to the O_b row and break the C-O bond, thus leaving the original carbonyl O atom at the Ti_5c site. After the transfer of methylene, several pathways to products are available. Thus, we have found that O_b atoms are intimately involved in the photoinduced decomposition of CH₂O on the rutile TiO₂(100)-(1×1) surface.     

A theoretical analysis of the TiO2/Sn doped (1 1 0) surface properties

We have used the periodic quantum-mechanical method with density functional theory at the B3LYP level in order to study TiO₂/Sn doped (1 1 0) surfaces and have investigated the structural, electronic and energy band properties of these oxides. Our calculated relaxation directions for TiO₂ is the experimental one and is also in agreement with other theoretical results. We also observe for the doped systems relaxation of lattice positions of the atoms. Modification of Sn, O and Ti charges depend on the planes and positions of the substituted atoms. Doping can modify the Fermi levels, energy gaps as well as the localization and composition of both valence and conduction band main components. Doping can also modify the chemical, electronic and optical properties of these oxides surfaces increasing their suitability for use as gas sensors and optoelectronic devices.     

Electronic exchanges between adsorbed Ni atoms and TiO2(1 1 0) surface evidenced by resonant photoemission

Nickel was deposited on stoichiometric TiO₂(1 1 0) surface in the 0.02–2.1 equivalent monolayer (eqML) range and analyzed by means of photoemission and resonant photoemission. In the case of very low coverage (lower than 0.1 eqML), deposited nickel reacts with the surface through an electronic transfer from nickel atoms towards titanium ions. This exchange caused the filling of unoccupied Ti3d states leading to the increase of a peak in the TiO₂ band gap. These states can be better characterized through resonant photoemission experiments at the Ti 3p → 3d absorption edge: for very low coverage, these states in the TiO₂ band gap have resonant behavior of Ti3d electrons rather than Ni3d ones, confirming the filling of Ti3d states and thus electron transfer between nickel and titanium. For coverage higher than 0.14 eqML, nickel peaks (both Ni3p core level and valence band) should be related to the presence of metallic nickel in small clusters.     

Surface structure of TiO2(011)-(2x1)

A combined experimental and first principles study of the (2x1)-reconstructed rutile TiO2(011) surface is presented. Our results provide evidence that the surface structure is described by a model that includes onefold coordinated (titanyl) oxygen atoms giving rise to double bonded Ti=O species. These species should play a special role in the enhanced photocatalytic activity of the TiO2(011) surface.     

Structure of rutile TiO2 (1 1 0) in water and 1 molal Rb at pH 12: Inter-relationship among surface charge, interfacial hydration structure, and substrate structural displacements

The rutile (1 1 0)-aqueous solution interface structure was measured in deionized water (DIW) and 1 molal (m) RbCl + RbOH solution (pH 12) at 25 °C with the X-ray crystal truncation rod method. The rutile surface in both solutions consists of a stoichiometric (1 × 1) surface unit mesh with the surface terminated by bridging oxygen (BO) and terminal oxygen (TO) sites, with a mixture of water molecules and hydroxyl groups (OH⁻) occupying the TO sites. An additional hydration layer is observed above the TO site, with three distinct water adsorption sites each having well-defined vertical and lateral locations. Rb⁺ specifically adsorbs at the tetradentate site between the TO and BO sites, replacing one of the adsorbed water molecules at the interface. There is no further ordered water structure observed above the hydration layer. Structural displacements of atoms at the oxide surface are sensitive to the solution composition. Ti atom displacements from their bulk lattice positions, as large as 0.05 Å at the rutile (1 1 0)-DIW interface, decay in magnitude into the crystal with significant relaxations that are observable down to the fourth Ti-layer below the surface. A systematic outward shift was observed for Ti atom locations below the BO rows, while a systematic inward displacement was found for Ti atoms below the TO rows. The Ti displacements were mostly reduced in contact with the RbCl solution at pH 12, with no statistically significant relaxations in the fourth layer Ti atoms. The distance between the surface 5-fold Ti atoms and the oxygen atoms of the TO site is 2.13 ± 0.03 Å in DIW and 2.05 ± 0.03 Å in the Rb⁺ solution, suggesting molecular adsorption of water at the TO site to the rutile (1 1 0) surface in DIW, while at pH 12, adsorption at the TO site is primarily in the form of an adsorbed hydroxyl group.     

Structure of rutile TiO2 (110)-(1 x 2): formation of Ti2O3 quasi-1D metallic chains

Combining STM, LEED, and density functional theory, we determine the atomic surface structure of rutile TiO2 (110)-(1 x 2): nonstoichiometric Ti2O3 stripes along the [001] direction. LEED patterns are sharp and free of streaks, while STM images show monatomic steps, wide terraces, and no cross-links. At room temperature, atoms in the Ti2O3 group have large amplitudes of vibration. The long quasi-1D chains display metallic character, show no interaction between them, and cannot couple to bulk or surface states in the gap region, forming good atomic wires.     

A DFT + U description of oxygen vacancies at the TiO2 rutile (1 1 0) surface

Experimental observations indicate that removing bridging oxygen atoms from the TiO₂ rutile (1 1 0) surface produces a localised state approximately 0.7 eV below the conduction band. The corresponding excess electron density is thought to localise on the pair of Ti atoms neighbouring the vacancy; formally giving two Ti³⁺ sites. We consider the electronic structure and geometry of the oxygen deficient TiO₂ rutile (1 1 0) surface using both gradient-corrected density functional theory (GGA DFT) and DFT corrected for on-site Coulomb interactions (GGA + U) to allow a direct comparison of the two methods. We show that GGA fails to predict the experimentally observed electronic structure, in agreement with previous uncorrected DFT calculations on this system. Introducing the +U term encourages localisation of the excess electronic charge, with the qualitative distribution depending on the value of U. For low values of U (?4.0 eV) the charge localises in the sub-surface layers occupied in the GGA solution at arbitrary Ti sites, whereas higher values of U (?4.2 eV) predict strong localisation with the excess electronic charge mainly on the two Ti atoms neighbouring the vacancy. The precise charge distribution for these larger U values is found to differ from that predicted by previous hybrid-DFT calculations.     

Crystal chemistry of layered carbide, Ti3(Si0.43Ge0.57)C2

 The crystal structure of a layered ternary carbide, Ti₃(Si_0.43Ge_0.57)C₂, was studied with single-crystal X-ray diffraction. The compound has a hexagonal symmetry with space group P6₃/mmc and unit-cell parameters a=3.0823(1) Å, c=17.7702(6) Å, and V=146.21(1) Å³. The Si and Ge atoms in the structure occupy the same crystallographic site surrounded by six Ti atoms at an average distance of 2.7219 Å, and the C atoms are octahedrally coordinated by two types of symmetrically distinct Ti atoms, with an average C-Ti distance of 2.1429 Å. The atomic displacement parameters for C and Ti are relatively isotropic, whereas those for A (=0.43Si+0.57Ge) are appreciably anisotropic, with U₁₁ (=U₂₂) being about three times greater than U₃₃. Compared to Ti₃SiC₂, the substitution of Ge for Si results in an increase in both A-Ti and C-Ti bond distances. An electron density analysis based on the refined structure shows that each A atom is bonded to 6Ti atoms as well as to its 6 nearest neighbor A site atoms, whether the site is occupied by Si or Ge, suggesting that these bond paths may be significantly involved with electron transport properties.     

Electronic properties of Au nano-particles supported on stoichiometric and reduced TiO2(1 1 0) substrates

Growth modes and electronic properties were analyzed for Au nano-particles grown on stoichiometric and reduced TiO₂(1 1 0) substrates by medium energy ion scattering (MEIS) and photoelectron spectroscopy(PES) using synchrotron-radiation-light. Initially, two-dimensional islands (2D) with a height of one and two atomic layers grow and higher coverage increases the islands height to form three-dimensional (3D) islands for the stoichiometric TiO₂(1 1 0) substrate. In contrast, 3D islands start to grow from initial stage with a small Au coverage (?0.1 ML, 1 ML = 1.39 × 10¹⁵  atoms/cm²: Au(1 1 1)) probably due to O-vacancies acting as a nucleation site. Above 0.7 ML, all the islands become 3D ones taking a shape of a partial sphere and the Au clusters change to metal for both substrates. We observed the Au 4f and Ti 3p core level shifts together with the valence band spectra. The Ti 3p peak for the O-deficient surface shifts to higher binding energy by 0.25 ± 0.05 eV compared to that for the stoichiometric surface, indicating downward band bending by an electron charge transfer from an O-vacancy induced surface state band to n-type TiO₂ substrate. Higher binding energy shifts of Au 4f peaks observed for both substrates reveal an electron charge transfer from Au to TiO₂ substrates. The work functions of Au nano-particles supported on the stoichiometric and reduced TiO₂ substrates were also determined as a function of Au coverage and explained clearly by the above surface and interface dipoles.     

Towards the preparation of realistic model Ziegler-Natta catalysts: XPS study of the MgCl2/TiCl4 interaction with flat SiO2/Si(1 0 0)

Despite of the wide use of supported Ti based Ziegler-Natta catalysts in the olefin polymerization industry, questions concerning the role of each one of the catalyst components in the polymerization process, have not found a satisfactory answer yet. This is mainly because of the high sensitivity of these systems to oxygen and atmospheric moisture that makes their study in an atomic level rather complicated. Realistic surface science models of the pre-activated SiO₂ supported MgCl₂/TiCl₄ and TiCl₄ Ziegler-Natta catalysts were prepared by spin coating on flat conductive SiO₂/Si(1 0 0) supports under inert atmosphere. This preparation technique resembles the wet chemical impregnation which is the industrial method of the catalyst preparation. XPS analysis showed that the catalyst precursor anchors on the silica surface through bonding of the Ti atoms with surface silanes or siloxanes, while Mg is attached to the Ti through chlorine bridges. Thermal treatment of the catalysts at 723 K leads to total Cl desorption when MgCl₂ is not present while a significant amount of the Ti atoms is reduced to the Ti³⁺ state.     

Atomic resolution noncontact atomic force and scanning tunneling microscopy of TiO2(110)-(1 x 1) and - (1 x 2): simultaneous imaging of surface structures and electronic states

We present simultaneous imaging of TiO2(110)-(1 x 1) and - (1 x 2) using noncontact atomic force microscopy (NC-AFM) and scanning tunneling microscopy (STM). The surface topography was imaged under NC-AFM feedback, while the surface electronic states were imaged by STM. The image contrasts of NC-AFM and STM were antiphase in (1 x 1) and in phase in (1 x 2). The uppermost oxygen and Ti atoms underneath were, respectively, imaged by NC-AFM and STM. The NC-AFM image contrast was close to the true surface topography in (1 x 2), but reduced in (1 x 1).     

TiO2-rich reconstructions of SrTiO3(0 0 1): a theoretical study of structural patterns

We have recently reported structure solutions for the (2 × 1) and c(4 × 2) reconstructions of SrTiO₃(0 0 1) based on high-resolution electron microscopy, direct methods analysis of diffraction data and density functional theory. Both reconstructions were found to be TiO₂-rich and feature a single overlayer of TiO₂ stoichiometry on top of a bulk-like TiO₂ layer. Qualitatively, the two reconstruction geometries differ in the cation sub-lattice of the overlayer only, where Ti atoms occupy half of the fivefold cation sites. In the present work we use density functional theory to generate a number of variations of this structural motif in search of patterns of stability. We find a reliable predictor for the reconstruction energy in the ability of oxygen atoms to relax vertically out of the overlayer plane to minimize non-bonded oxygen-oxygen repulsions. Out-of-plane relaxation of oxygen atoms in turn is modulated by the number and relative position of coordinating Ti atoms, which yields simple empirical rules as to how cations are distributed in low energy reconstructions.     

Metallization and Schottky-barrier formation for Se-passivated GaAs(1 0 0) interfaces

Using a molecular dynamics DFT-LDA code, we have analyzed the Schottky-barrier formation of a Se-passivated GaAs(1 0 0)-2×1 reconstruction. In our approach we consider, first, the energetically most favorable interfaces formed by the deposition of either one or two Ga atoms per surface unit cell; then, we analyze the electron density of states and calculate the interface Fermi level and the Schottky-barrier height. We show that the height depends essentially on the very same interface geometry. In particular, the effect of exchanging Ga and Se atoms at the interface (an intermixing process) yields a normal Schottky-barrier height, while the normal passivated surface yields an ohmic contact.     

Ge dots on Si (1 1 1) and (1 0 0) surfaces with SiO2 coverage: Raman study

Germanium quantum dots formed on Si (1 1 1) and (1 0 0)-oriented surfaces coated with ultra-thin oxide layers are studied using Raman spectroscopy technique. Some structural properties (height, stoichiometry and mechanical stresses) of the dots were estimated from Raman data. For analysis of the experimental data, the Raman spectra of Ge nanoclusters containing some hundreds of Ge atoms were calculated numerically. The effects of the resonance enhancement of the intensity of Raman scattering in the Ge-nanoclusters–SiO₂–Si system were discussed. The influence of the lateral sizes of Ge nano-clusters on the frequencies of phonons localized in them was studied using numerical simulation. The influence of multi-layer growth on the structure of the Ge quantum dots was investigated.     

Theoretical study of CO and Pb adsorption on the Ni(1 1 1) and Ni3Al(1 1 1) surfaces

Adsorption of CO molecules and Pb atoms on the Ni(1 1 1) and Ni₃Al(1 1 1) substrates is studied theoretically within an ab initio density-functional-theory approach. Stable adsorption sites and the corresponding adsorption energies are first determined for stoichiometric surfaces. The three-fold hollow sites (fcc for Pb and hcp for CO) are found most favourable on both substrates. Next, the effect of surface alloying by a substitution of selected topmost substrate atoms by Pb or Ni atoms on the adsorption characteristics is investigated. When the surface Al atoms of the Ni₃Al(1 1 1) substrate are replaced by Ni atoms, the Pb and CO adsorption energies approach those for a pure Ni(1 1 1) substrate. The Pb alloying has a more substantial effect. On the Ni₃Al(1 1 1) substrate, it reduces considerably adsorption energy of CO. On the Ni(1 1 1) substrate, CO binding strengthens slightly upon the formation of the Ni(1 1 1)p(2×2)-Pb surface alloy, whereas it weakens drastically when the Ni(1 1 1)-Pb surface alloy is formed.     

Theoretical study of Ti and Fe surface alloys on Al(0 0 1) substrate

Accurate density-functional calculations are performed to investigate the formation of Ti and Fe ultrathin alloys on Al(0 0 1) surface. It is demonstrated that a deposition of Ti monolayer on Al(0 0 1) substrate leads to the formation of Al₃Ti surface alloy with Ti atoms arranged according to the L1₂ stacking, distinct from the D0₂₂ structure characteristic of a bulk Al₃Ti compound. A quest for the reason of this distinct atomic arrangement led us to the study of the surface structure of Al₃Ti(0 0 1) compound. It is concluded that even the Al₃Ti(0 0 1) surface is terminated with three layers assuming a L1₂ stacking and hence this stacking fault can be classified as a surface-induced stacking fault. Several possibilities of Fe atoms distributed in the surface region of Al(0 0 1) have been examined. The most stable configuration is the one with the compact Fe monolayer on Al(0 0 1) and covered by one Al monolayer. Lastly, our calculations show that there is no barrier for the penetration of Fe adatoms below the Al(0 0 1) surface; however, such a barrier is present for a Ti-alloyed Al(0 0 1) surface.     

Ti$lt;sub$gt;2$lt;/sub$gt;B$lt;sub$gt;$lt;i$gt;n$lt;/i$gt;$lt;/sub$gt;($lt;i$gt;n$lt;/i$gt;=1–10)团簇的结构与稳定性:基于从头算的研究

采用密度泛函理论中的B3LYP方法, 结合从头算的CCSD(T)方法对Ti₂B_n(n=1–10)团簇的稳定性和电子性质进行了研究. 发现两个Ti原子的掺杂导致B_n团簇结构发生了根本性变化. 随着n的增大, Ti₂B_n团簇结构生长非常规律. 所有的最稳定结构都可看成双锥结构, 并且两个Ti原子处在双锥结构的锥顶. 根据二阶差分能量分析, 得出Ti₂B_n(n=1–10)团簇的幻数是6, 7和8. 进一步分析了团簇的Ti原子解离能、B原子解离能以及团簇的电子亲和势和电离势. 这些能量分析表明Ti₂B₆团簇既有良好的热力学稳定性, 又有良好的动力学稳定性. 应用前线轨道理论, 对Ti原子与B₆之间的成键进行了分析, 了解其稳定性的根源. 关键词： 2B_n团簇')" href="#">Ti₂B_n团簇 稳定性 从头计算 电子结构     

NiTi(110)表面氧原子吸附的第一性原理研究

为了研究给定的NiTi的表面氧化过程,在保持体系中Ni和Ti原子总数相等的条件下,构建了一系列Ti原子在表面反位的c(2×2)-NiTi(110)缺陷体系,并利用第一性原理计算研究了氧原子在各种NiTi(110)反位缺陷体系的吸附行为以及表面形成能.计算结果表明:吸附氧原子的稳定性与表面Ti原子的富集程度有很大的关联性,体系表面Ti原子富集程度越高,氧原子吸附的稳定性越高;当覆盖度较高时,由于氧原子的吸附,可使Ni和Ti原子在表面出现反位.在富氧条件(μ_o≥-9.35 eV)下,氧原子在表面第1层中的全部Ni原子与第3层全部Ti换位的反位缺陷体系上的吸附最稳定,此时随着氧原子的吸附,表面上的Ti原子升高,导致向上膨胀生长形成二氧化钛层,且在其下方形成富Ni层,由此可合理地解释实验上发现NiTi合金氧化形成二氧化钛层的可能原因.     

First-principles calculations of hydrogen molecule adsorption on Ti (0 0 0 1)-(2 × 1) surface

Adsorption of H₂ molecule on the Ti (0 0 0 1)-(2 × 1) surface was studied by density functional theory with generalized gradient approximation (GGA). The parallel and vertical absorption cases were investigated in detail by adsorption energy and electronic structure analysis, we obtained three stable configurations of FCC-FCC (the two H atoms adsorption on the two adjacent fcc sites of Ti (0 0 0 1) surface, respectively), HCP-HCP (the two H atoms adsorption on the two adjacent hcp sites of Ti (0 0 0 1) surface, respectively) and FCC-HCP (the one H atom adsorption on the fcc site and the other adsorption on the near hcp site) based on the six different parallel adsorption sites after the H₂ molecule dissociates. However, all the end configurations of four vertical adsorption sites were unstable, H₂ molecule was very easy to desorb from Ti surface. The H-H bond breaking and Ti-H bond forming result from the H₂ molecule dissociation. H-H bond breaking length ranges from 1.9 Å to 2.3 Å for different adsorption configurations due to the strong Ti-H bond forming. The H₂ dissociative approach and the end stable configurations formation in parallel adsorption processes are attributed to the quantum mechanics steering effects.