Probing the Ba 5d states in BaTiO3 and BaSO4: A resonant x-ray emission study at the Ba-L3 edge

We have directly probed the Ba 5d states in the ferroelectric barium titanate BaTiO₃ using two bulk-sensitive spectroscopic probes, resonant x-ray emission spectroscopy (RXES) and x-ray absorption spectroscopy in the partial fluorescence mode (PFY-XAS) at the Ba-L₃ edge. The results are compared with those of the non-ferroelectric barium sulfate BaSO₄. While the RXES spectra point to a localized character for the Ba 5d states in both compounds, the main peak of the PFY-XAS spectrum, corresponding to the dipolar transitions from 2p to 5d, is found to be significantly broader for BaTiO₃ than for BaSO₄. On the basis of band structure calculations, this broadening is ascribed to strong hybridization between the unoccupied Ba 5d and O 2p states in the ferroelectric. This suggests that the hybridization between the conduction states of the Ba²⁺ and O^2? ions, and not only Ti⁴⁺ and O^2?, plays a central role in determining the electronic structure of BaTiO₃, and is therefore likely to be indirectly correlated with the occurrence of ferroelectricity in this material.     

Nonlinear optical properties in SrTiO3 thin films by pulsed laser deposition

Well-crystallized 250 nm-thick SrTiO₃ thin films on fused-quartz substrate were prepared by pulsed laser deposition. The band-gap of SrTiO₃ thin film by transmittance spectra is equal to 3.50 eV, larger than 3.22 eV for the bulk crystal. The nonlinear optical properties of the films were examined with picosecond pulses at 1.064 μm excitation. A large two-photon absorption (TPA) with absorption coefficient of 87.7 cm/GW was obtained, larger than 51.7 cm/GW for BaTiO₃ thin films. The nonlinear refractive index n₂ is equal to 5.7×10⁻¹⁰ esu with a negative sign, larger than 0.267×10⁻¹¹ esu for bulk SrTiO₃. The large TPA is attributed to intermediate energy levels introduced by the grain boundaries, and the optical limiting behaviors stemming from both TPA and negative nonlinear refraction were also discussed.     

Structural and electronic properties of Fe-doped BaTiO3 and SrTiO3

We have performed first principles calculations of Fe-doped BaTiO3 and SrTiO3. Dopant formation energy, structure distortion, band structure and density of states have been computed. The dopant formation energy is found to be 6.8eV and 6.5eV for Fe-doped BaTiO3 and SrTiO3 respectively. The distances between Fe impurity and its nearest O atoms and between Fe atom and Ba or Sr atoms are smaller than those of the corresponding undoped bulk systems. The Fe defect energy band is obtained, which mainly originates from Fe 3d electrons. The band gap is still an indirect one after Fe doping for both BaTiO3 and SrWiO3, but the gap changes from Γ-R point to Γ-X point.     

Nature of optical properties of GdFe3(BO3)4 and GdFe2.1Ga0.9(BO3)4 crystals and other 3d5 antiferromagnets

Influence of the partial substitution of paramagnetic Fe³⁺ ions by diamagnetic Ga³⁺ ions in the trigonal crystal GdFe₃ (BO₃)₄ on its optical and magnetic properties is studied and discussed in connection with problems common for all antiferromagnets containing 3d ⁵ ions. Polarized optical absorption spectra and linear birefringence of GdFe₃ (BO₃)₄ and GdFe_2.1Ga_0.9 (BO₃)₄ single crystals have been measured in the temperature range 85–293 K. Specific heat temperature dependence (2–300 K) and structure of GdFe_2.1Ga_0.9 (BO₃)₄ crystal have been also studied. As a result of substitution of 30% Fe to Ga the Neel temperature diminishes from 38 till 16 K, the strong absorption band edge shifts on 860 cm^-1 (0.11 eV) to higher energy and the d-d transitions intensity decreases substantially larger than the Fe concentration does. Strong absorption band edge is shown to be due to Mott-Hubbard transitions. Correlation between position of the strong absorption band edge and the Neel temperature of antiferromagnets has been revealed. Properties of the doubly forbidden d-d transitions in the studied crystals and in other antiferromagnets are explained within the framework of the model of the exchange-vibronic pair absorption, which is theoretically analyzed in detail. The model permitted us to determine the connection between parameters of d-d absorption bands (intensity, width and their temperature dependences), on the one hand, and the exchange, spin-orbit and electron-lattice interactions, on the other hand.     

The structure and magnetotransport properties of La2/3Sr1/3MnO3/Ba(La)TiO3 composites

The effect of Ba(La)TiO₃ doping on the structure and magnetotransport properties of La_2/3Sr_1/3MnO₃(LSMO)/xBa(La)TiO₃ (x=0.0, 1.0, 5.0 mol%) have been investigated. The X-ray diffraction patterns and microstructural analysis show that BaTiO₃ and LSMO phases exist independently in BaTiO₃-doped composites. The metal-insulator transition temperature (T_MI) decreases whereas the maximum resistivity increases very quickly by the increase of BaTiO₃ doping level. The partial substitution of Ba by La(0.35 mol%) results in a decrease in resistivity of LSMO/xBa(La)TiO₃ composites. Magnetoresistance of BaTiO₃-doped composites decreases monotonously in the temperature range 200-400 K in a magnetic field of 5 T, which is completely different from that of LSMO compound. The value of MR decreases at low field (H<1 T) and increases at high fields (H>1 T) with increasing the BaTiO₃ doping level at low temperatures below 280 K. These investigations reveal that the magnetotransport properties of LSMO/xBa(La)TiO₃ composites are dominated by spin-dependent scattering and tunneling effect at the LSMO/BaTiO₃/LSMO magnetic tunnel junction.     

Optical and thermoelectric characterizations of electroplated n-Bi2(Te0.9Se0.1)3

Bismuth selenotelluride (Bi₂(Te_0.9Se_0.1)₃) films were electrodeposited at constant current density from acidic aqueous solutions with Arabic gum in order to produce thin films for miniaturized thermoelectric devices. X-ray fluorescence spectroscopy determined film compositions. X-ray diffraction pattern shows that the films as deposited are polycrystalline, isostructural to Bi₂Te₃ and covered by crystallites. Mueller-matrix analysis reveals that the electroplated layers are optically like an isotropic medium. Their pseudo-dielectric functions were determined using mid-infrared spectroscopic ellipsometry. Tauc-Lorentz combined with Drude dispersion relations were successfully used. The energy band gap E_g was found to be about 0.15 eV. Moreover, the fundamental absorption edge was described by an indirect optical band-to-band transition. From Seebeck coefficient measurement, films exhibit n-type charge carrier and the value of thermoelectric power is about −40 μV/K.     

Optical and acoustic properties of TeO2/WO3 glasses with small amount of additive ZrO2

The optical and acoustic properties of tellurite glasses in the system TeO₂/ZrO₂/WO₃ have been investigated. The refractive index at different wavelengths and the optical spectra of the glasses have been measured. From the refractive index and absorption edge studies for prepared glasses, the optical parameter viz; optical band gap (E_opt), Urbach energy, (ΔE), dispersion energy, E_d, and the average oscillator energy, E₀, have been calculated. Sound velocities were measured by pulse echo technique. From these velocities and densities values, various elastic moduli were calculated. The variations in the refractive index, optical energy gap and elastic moduli with WO₃ content have been discussed in terms of the glass structure. Quantitatively, we used the bond compression model for analyzing the room temperature elastic moduli data. By calculating the number of bonds per unit volume, the average stretching force constant, and the average ring size we can extract valuable information about the structure of the present glasses.     

纳米SrTiO3的光声光谱研究

利用光声光谱技术对不同退火温度的纳米SrTiO₃粉末进行了研究．结果表明，纳米SrTiO₃粉末随退火温度升高，吸收边红移，说明能隙变窄，这与颗粒长大、晶格参数减小有关．在700nm附近出现的宽吸收带是由氧缺位俘获的电子在缺陷附加能级上的跃迁所产生的，其变化趋势强烈地依赖于颗粒尺寸 关键词：     

Electronic structure of ZrTiO4 and HfTiO4: Self-consistent cluster calculations and X-ray spectroscopy studies

Total and partial densities of states of the constituent atoms of ZrTiO₄ and HfTiO₄ titanates have been calculated using a self-consistent cluster method as incorporated in the FEFF8 code. The calculations reveal the similarity of the electronic structure of both titanates and indicate that the valence band of the compounds under consideration is dominated by contributions of O 2p states. These states contribute throughout the whole valence-band region; however their maximum contributions occur in the upper portion of the band. Other significant contributors in the valence-band region are Ti 3d and Zr 4d states in ZrTiO₄ and Ti 3d and Hf 5d states in HfTiO₄. All the above d-like states contribute throughout the whole valence-band region of the titanates; however maximum contributions of the Ti 3d states occur in the upper portion, whilst those of the Zr 4d (Hf 5d) states are in the central portions of the valence band. The FEFF8 calculations render that the bottom of the conduction band of ZrTiO₄ and HfTiO₄ is dominated by contributions of Ti 3d^? states, with also smaller contributions of Zr 4d^?/Hf 5d^? and O 2p^? states. To verify the above FEFF8 data, the X-ray emission bands, representing the energy distributions of mainly O 2p, Ti 3d and Zr 4d states, were measured and compared on a common energy scale. These experimental data are found to be in agreement with the theoretical FEFF8 results for the electronic structure of ZrTiO₄ and HfTiO₄ titanates. Additionally, X-ray photoelectron valence-band and core-level spectra were recorded for the constituent atoms of the titanates under study.     

掺杂BaTiO3/SrTiO3多层膜与太赫兹波相互作用

掺杂半导体中的载流子吸收在THz波段非常明显,其相互作用研究是研制THz通信中的关键器件之一的基础。采用氟化氪（KrF）脉冲准分子激光烧蚀沉积（PLD）技术,制备了Ni掺杂BaTiO3/SrTiO3多层膜。基于辐射频率为3.09 THz、脉冲功率为10 mW量级的THz 量子级联激光器(QCL)光源研究了太赫兹波在Ni掺杂BaTiO3/SrTiO3多层膜中的传输,发现损耗主要是Ni颗粒的非共振吸收导致。     

Structure-related infrared optical properties of BaTiO3 thin films grown on Pt/Ti/SiO2/Si substrates

BaTiO₃ thin films with different thickness have been grown on Pt/Ti/SiO₂/Si substrates by a modified sol-gel method. X-ray diffraction analyses show that the BaTiO₃ thin films are polycrystalline. The crystalline quality of the films is improved with increasing thickness. The infrared optical properties of the BaTiO₃ thin films have been investigated using an infrared spectroscopic ellipsometry in the wave number range of 800-4000 cm⁻¹ (2.5-12.5 μm). By fitting the measured pseudodielectric functions with a three-phase model (Air/BaTiO₃/Pt), and a derived classical dispersion relation for the thin films, the optical constants and thicknesses of the thin films have been simultaneously obtained. The refractive index of the BaTiO₃ thin films increases and on the other hand, the extinction coefficient does not change with increasing thickness in the entirely measured wave number range. The dependence of the refractive index on the film thickness has been discussed in detail and was mainly due to both the crystalline quality of the films and packing density. Finally, the absorption coefficient was calculated in the infrared region for applications in the pyroelectric IR detectors.     

Site-specific valence-band X-ray photoelectron spectra of a SrTiO3 single-crystal by X-ray standing wave technique

Site-specific valence-band X-ray photoelectron spectra of SrTiO₃ (111) were successfully obtained by using X-ray standing wave technique. Contributions of the Ti and SrO₃ derived states to the valence-band spectra were clearly separated. The spectra provided not only site-specific but also bulk-sensitive information on the SrTiO₃ crystal because of the use of a high-energy synchrotron X-ray source (hν=4750 eV) for photoelectron excitation with the large escape depth. The electronic structures calculated by the DV-Xα method using a (Sr₈Ti₂₇O₁₀₈)⁹²⁻ cluster model well reproduced the observed structures in the valence-band spectra. The partial density of states of both Ti and Sr ions in SrTiO₃ were mainly distributed over the bottom of the valence-band to produce the covalent bonding with O ions.     

Impurity induced resonance states at the superconducting interface LaAlO3/SrTiO3

Motivated by the recent discovery of superconductivity on the heterointerface LaAlO₃/SrTiO₃, we theoretically investigate the impurity-induced resonance states with coexisting spin singlet s- and triplet p-wave pairing symmetries by considering the influence of Rashba-type spin-orbit interaction (RSOI). Due to the nodal structure of the mixed gap function, we find single nonmagnetic impurity-induced resonance peaks appearing in the local density of state. We also analyze the evolutions of density of states and local density of states with the weight of triplet pairing component determined by the strength of RSOI, which will be widely observed in thin films of superconductors with surface or interface-induced RSOI, or various noncentrosymmetric superconductors in terms of point contact tunneling and scanning tunneling microscopy, and thus shed light on the admixture of the spin singlet and RSOI-induced triplet superconducting states.     

Film thickness dependence of electro-optic effect in epitaxial BaTiO3 thin films

Based on the phenomenological Landau-Devonshire theory, we investigate the film thickness dependence of ferroelectric and electro-optic properties of epitaxial BaTiO₃ thin films grown on SrTiO₃ and MgO substrates. By using the effective substrate lattice parameter concept, the film thickness dependence of misfit strain is incorporated into the theory. Therefore, the film thickness dependence of ferroelectric and electro-optic properties in epitaxial BaTiO₃ thin films can be explained. Moreover, a large quadratic electro-optic effect was obtained in the BaTiO₃ thin films, which is in good agreement with the experimental result of BaTiO₃ thin films on the MgO substrate.     

Electrical conduction and magnetoelectric effect of (x) BaTiO3 + (1−x) Ni0.92Co0.03Cu0.05Fe2O4 composites in ferroelectric rich region

Particulate composites with composition (x)BaTiO₃+(1−x)Ni_0.92Co_0.03Cu_0.05Fe₂O₄ in which x varies as 1, 0.85, 0.70, 0.55 and 0 (in mol%) were prepared by the conventional double sintering ceramic technique. The presence of two phases viz. ferromagnetic (Ni_0.92Co_0.03Cu_0.05Fe₂O₄) and ferroelectric (BaTiO₃) was confirmed by X-ray diffraction analysis. The dc resistivity and thermo-emf measurements were carried out with variation of temperature. The ac conductivity (σ_ac) measurements investigated in the frequency range 100 Hz to 1 MHz conclude that the conduction in these composites is due to small polarons. The variation of dielectric constant and loss tangent with frequency (20 Hz to 1 MHz) was studied. The static magnetoelectric conversion factor, i.e. dc (dE/dH)_H was measured as a function of intensity of applied magnetic field. The changes were observed in electrical properties as well as in magnetoelectric voltage coefficient as the molar ratio of the constituent phases was varied. A maximum value of magnetoelectric conversion factor of 536.06 μV/cm Oe was observed for the composite with 70% BaTiO₃+30% Ni_0.92Co_0.03Cu_0.05Fe₂O₄ at a dc magnetic field of 2.3 K Oe. The maximum magnetoelectric conversion output has been explained in terms of ferrite-ferroelectric content, applied static magnetic field and resistivity.     

Disorder-dependent photoluminescence in Ba0.8Ca0.2TiO3 at room temperature

The photoluminescence (PL) emission in structurally disordered Ba_0.8Ca_0.2TiO₃ (BCT20) powders was observed at room temperature with laser excitation at lines 355 and 460 nm. The structural evolution perovskite-like titanate BCT20 powders prepared by a soft chemical processing at different annealing temperatures were accompanied by X-ray diffraction (XRD) and X-ray absorption near-edge structure (XANES). Intermediate oxycarbonate phase was identified and your influence with PL emission was discarding. BCT20 annealed at 500 °C displays intense PL emission. The results indicate relationship between broad PL band and order-disorder degree.     

Optical investigation of charge-transfer transitions in spinel Co3O4

Optical transitions in normal-spinel Co₃O₄ have been identified by investigating the variation of its optical absorption spectrum with the replacement of Co by Zn. Three optical-transition structures were located at about 1.65, 2.4, and 2.8 eV from the measured dielectric function of Co₃O₄ by spectroscopic ellipsometry. The variation of the absorption structures with the Zn substitution (Zn_xCo_3−xO₄) can be explained in terms of charge-transfer transitions involving d states of Co ions. The 1.65 eV structure is assigned to a d-d charge-transfer transition between the t_2g states of octahedral Co³⁺ ion and t₂ states of tetrahedral Co²⁺ ion, t_2g(Co³⁺)→t₂(Co²⁺). The 2.4 and 2.8 eV structures are interpreted as due to charge-transfer transitions involving the p states of O²⁻ ion: p(O²⁻)→t₂(Co²⁺) for the 2.4 eV absorption and p(O²⁻)→e_g(Co³⁺) for the 2.8 eV absorption. The observed gradual reduction of the 1.65 and 2.4 eV absorption strength with the increase of the Zn composition for Zn_xCo_3−xO₄ can be explained in terms of the substitution of the tetrahedral Co²⁺ sites by Zn²⁺ ions. The crystal-field splitting Δ_Oh between the e_g and the t_2g states of the octahedral Co³⁺ ion is estimated to be 2 eV.     

Dielectric response in ferroelectric BaTiO3

The far-infrared optical and dielectric properties of ferroelectric perovskite titanate powder BaTiO₃ are reported. The terahertz time-domain spectroscopy (THz-TDS) measurement reveals that the low frequency dielectric response of BaTiO₃ is closely related to the lowest pair of transverse optical (TO) and longitudinal optical (LO) modes near at 180 cm⁻¹, which is verified by Raman spectroscopy. This result provides a better understanding of the relation of low-frequency dielectric function with the optical phonon mode for ferroelectric materials. Combining terahertz TDS with Raman spectra, the overall low frequency optical phonon response of BaTiO₃ is presented in an extended spectral range from 6.7 to 1200 cm⁻¹.     

Luminescent properties of trivalent praseodymium-doped lanthanum aluminum germanate LaAlGe2O7

The luminescent characteristics of Pr³⁺-activated LaAlGe₂O₇ were investigated. In response to excitement using 448 nm blue light, the emission spectra involved most of the ³P₀→³H_J transitions. The dominant emission came from the ³P₀→³H₄ transition at 487 nm. ¹D₂ fluorescence quenching was observed in highly doped samples and is related to the cross-relaxation processes among neighboring Pr³⁺ ions. In contrast with conventional Pr³⁺-activated phosphors, the extraordinary excitation spectra showed only intense f-f transition of Pr³⁺ ions, while the 4f-5d transition was eliminated. This is ascribed to photoionization. By analyzing absorption and excitation spectra, it is recognized that no efficient energy transfer occurs between Pr³⁺ and the host lattice in LaAlGe₂O₇.