Development of a highway traffic noise prediction model that considers various road surface types

A highway traffic noise prediction model has been developed for environmental assessment in South Korea. The model is based on an outdoor sound propagation method and is fully compliant with ISO 9613 and the sound power level (PWL) estimation for a road segment, as suggested in the ASJ Model-1998 that is based on PWLs. Due to that model’s selection of two pavement types, such as asphalt or concrete pavement, an unacceptable traffic noise prediction is made in cases where the road surface is different from that on which the model is based. In order to address this problem, several road surface types are categorized, and the PWL of each surface type is determined and modeled by measuring the noise levels obtained from newly developed methods. An evaluation of the traffic noise prediction model using field measurements finds good agreement between predicted and measured noise levels.     

Dynamic noise modeling at roundabouts

Modeling spatial and temporal noise variations at roundabouts is a tedious task. Indeed, noise levels are strongly influenced by the complex vehicle interactions taking place at the entries. An accurate modeling of the merging process and its impact on vehicle kinematics, waiting time at the yield signs and queue length dynamics is therefore required. Analytical noise prediction models disregard those impacts since they are based on average flow demand patterns and pre-defined kinematic profiles. The only way to capture all traffic dynamics impacts on noise levels is to combine a traffic simulation tool with noise emission laws and a sound propagation model. Yet, such existing dynamic noise prediction packages fail in representing vehicle interactions when the roundabout is congested and are difficult to calibrate due to their numerous parameters. A new traffic simulation tool, specifically developed for roundabouts, is therefore proposed in this paper. It has few easy-to-calibrate parameters and can be readily combined with noise emission and propagation laws. The obtained noise package is able to produce relevant dynamic noise contour maps which can support noise emission assessment of local traffic management policies. Results are validated against empirical data collected on a French suburban roundabout on two different peak periods.     

Influence of expanding ring roads on traffic noise in Beijing City

The road network in Beijing is expanding in the form of loop-lines. Following the 2nd and 3rd ring roads, the 4th has been completed and come into operation in 2002. Traffic noise surveying and analysis was performed along four main roads in the Beijing urban area—the 2nd, 3rd and 4th ring roads circling the central downtown area and Chang-An Avenue, a major east-west corridor through the heart of the city. Measured noise data along the 2nd, 3rd and Chang-An Avenue were compared with the data surveyed before the completion of the 4th ring road for determining influence of expanding ring roads on traffic noise pattern in Beijing City. The results indicate that these main roads remain overloaded by traffic flow during daytime, and noise levels due to road traffic along these roads exceeds relavent environmental standards by 5 dBA. Reduced traffic noise level was observed along the northern half of the 2nd and 3rd ring roads, and along the central section of Chang-An Avenue. Increased traffic noise level was observed along the southern half of the 2nd and 3rd ring roads, and along the non-central section of Chang-An Avenue. Expanding ring roads mitigate heavy traffic flow in the central part of Beijing City, but spread high traffic noise outwards at the same time.     

Traffic noise spectrum analysis: Dynamic modeling vs. experimental observations

This paper compares two traffic representations for the assessment of urban noise frequency spectrum: (i) a static one, based on mean vehicle speeds and flow rates, (ii) a dynamic one, which considers vehicle interactions along the network. The two representations are compared on their suitability to match real on-field noise levels, recorded on a three lane quite busy street. Representation (i) fails in reproducing spectra envelopes that correspond to this site. In particular, it underestimates low frequencies, what can conceal the real impact of traffic flow on urban sound quality. Representation (ii) greatly improves estimation. It guarantees accurate environmental noise assessment, since it reproduces all traffic situations that are encountered in the site. Moreover, its 1s-based structure allows for the evaluation of spectra variations, with a good accuracy.     

3D analysis and investigation of traffic noise impact from a new motorway on building and surrounding area

This study analyzes and investigates the impact of traffic noise on the high-rise building and surrounding area by the side of a new motorway that links Bangkok to the new Suwannaphum International Airport and Pattaya. A traffic noise simulation model in 3D form is applied on a GIS system. Visualized noise levels are formulated in vectored contours for noise mapping on all surfaces of the building and surrounding ground in a 3D platform. Noise impact is then investigated based on this 3D noise mapping in LAeq,1 h noise contours. The investigation shows that there is a high traffic noise impact on the foreground and front façade of the building, rendering this area unsuitable for residential purposes. The ground area by the sides of the building and the building side panels receive a lower noise impact. Most of these areas are still not acceptable for residential use; however, all of the side panels and most of the ground area by the sides of the building can be used for commercial and business purposes. The back yard and back panel, together with the rooftop, have the lowest traffic noise impact. They are the safest places for use as residential areas, except for a small strip along the front edge of the rooftop. From this study, residential areas that are sensitive to noise impact must be located far away from the front façade and side panels of a building. It is also shows that the building height is not an effective means of reducing motorway noise on the upper part of the building.     

A traffic noise prediction method based on vehicle composition using genetic algorithms

The effect of traffic composition on the noise pollution has been investigated in a small city Erzurum, located in eastern Turkey, where the population is about 400,000. Manual noise measurements and vehicle counts were performed at the four heaviest traffic points in the city for a period of 12 h. Using the information on vehicle composition and the maximum legal noise emissions of each type of vehicles, two prediction models based on genetic algorithms have been developed that can be used as tools for in-city traffic flow redesign. The models have been validated against some of the noise data. Measured traffic noise levels have been compared with predictions using the new models and some existing ones and a relatively good agreement has been obtained between them.     

Evaluation and analysis of the environmental noise of Messina, Italy

In this paper, the results of a study on the environmental noise pollution of the city of Messina (Italy) are presented. The investigation has included a preliminary classification of the territory in six acoustically homogeneous areas according to Italian noise regulations. On the basis of the resultant acoustic zoning 35 sites were selected for an experimental survey. This last has been carried out by extensive measurements of the main indexes for noise pollution (L_eq, L₁, L₁₀, L₅₀, L₉₀, L₉₉) and of the traffic flow and composition. Results indicate that: (a) main roads of Messina are overloaded by traffic flow during day-time period and that in all the examined sites daily average sound levels due to road traffic exceed environmental standards by about 10 dBA; (b) environmental noise exhibits a certain degree of spatial variance resulting primarily from the peculiar geo-morphological structure of the town and from the transport infrastructure and (c) more than 25% of residents should be highly disturbed by road traffic noise.     

Community reactions to noise from freely flowing traffic,motorway traffic and congested traffic flow

Responses to a social survey were collected from residents of 27 different sites in the Greater Manchester area. The sites were exposed to noise emanating from (a) freely flowing traffic on urban roads, or (b) motorway traffic, or (c) congested or disturbed traffic flow on urban roads. Existing noise indices were tested on this general sample of traffic flow situations to determine their efficacy in the prediction of community dissatisfaction to traffic noise. No existing index could handle adequately all the traffic flow conditions. When the indices were combined with measures of traffic volume flow between midnight and 6 a.m. a marked improvement in their predictive capability was noted. In particular, extended indices based on L₁₀ (18 hour) and L_eq appeared to be useful predictors of community response to all of the traffic flow situations studied in this project.