Calcification of aortic human valves studied in situ by Raman microimaging: following mineralization from small grains to big deposits

A Raman microimaging‐based approach has been used in the current study to evaluate formation and progression of calcification in situ in human stenotic aortic valves obtained during surgical valve replacement. The capability of the method to visualize distribution of the calcified deposits resulted in structural characterization of deposits in the various phases of development. A high spatial resolution of the method along with the confocal depth profiling enabled to identify extremely small salt inclusions (of ca. 0.5 µm in diameter), formed probably at the very early stage of calcification. Structurally, these inclusions are built from an octacalcium phosphate‐like compound that during grains' growth transforms into tricalcium phosphate, mixed with the salt containing the acidic phosphate groups (HPO₄²⁻) and, finally, into stable B‐type hydroxyapatite that is the only salt present in large‐area calcium salt deposits. Copyright © 2013 John Wiley & Sons, Ltd.     

Characterization of biomaterials commonly used in dentistry for bone augmentation by X‐ray and electron techniques

Hydroxyapatite (HA), beta‐tricalcium phosphate and bioactive glasses are commonly used as reabsorbable biomaterials, mainly in orthopaedics and dentistry. The performance of each material depends on many factors, in particular, on their chemical and phase composition, microstructure, granule size and pore volume. For this reason, it is important to have a full characterization that allows correlating these properties with the material biological behaviour. In this work, three commercial samples of materials currently used in dentistry as bone substitutes were characterized. Granules corresponding to bovine and synthetic HA and bioactive glass 45S5 type were studied by scanning electron microscopy, conventional and synchrotron radiation X‐ray diffraction and X‐ray fluorescence. The specific surface area was also obtained by the Brunauer, Emmett and Teller method. We observed that Ca/P molar ratios for both HAs are higher than the value corresponding to the stoichiometric HA. The coherent domain obtained for the bovine HA is larger along the c axis crystal direction, and it is around 15 times lower than the value corresponding to the synthetic HA. The specific surface area for the bovine HA is one of the highest values reported in literature. Low amounts of crystalline CaO were observed only for the synthetic HA sample. Crystalline combeite and wollastonite were detected for the bioactive glass sample and quantified by using rutile as internal standard. The relation between the physico‐chemical characterization performed in this work and the potential biological response of the materials is discussed in terms of the information available in literature. Copyright © 2016 John Wiley & Sons, Ltd.     

Laser-assisted production of tricalcium phosphate nanoparticles from biological and synthetic hydroxyapatite in aqueous medium

Pulsed laser ablation technique has attracted great attention as a method for preparing nanoparticles. In this work, calcined fish bones and synthetic hydroxyapatite, have been used as target to be ablated in de-ionized water with a pulsed CO₂ laser to produce calcium phosphate nanoparticles. The obtained nanoparticles were amorphous and spherical in shape with a mean diameter of about 25 nm. The microanalyses revealed that nanoparticles obtained from the synthetic HA undergo transformation to tricalcium phosphate. While nanoparticles obtained from the biological hydroxyapatite mostly preserve the composition of precursor material.     

The pathogenesis of Randall's plaque: a papilla cartography of Ca compounds through an ex vivo investigation based on XANES spectroscopy

At the surface of attached kidney stones, a particular deposit termed Randall's plaque (RP) serves as a nucleus. This structural particularity as well as other major public health problems such as diabetes type‐2 may explain the dramatic increase in urolithiasis now affecting up to 20% of the population in the industrialized countries. Regarding the chemical composition, even if other phosphate phases such as whitlockite or brushite can be found as minor components (less than 5%), calcium phosphate apatite as well as amorphous carbonated calcium phosphate (ACCP) are the major components of most RPs. Through X‐ray absorption spectroscopy performed at the Ca K‐absorption edge, a technique specific to synchrotron radiation, the presence and crystallinity of the Ca phosphate phases present in RP were determined ex vivo. The sensitivity of the technique was used as well as the fact that the measurements can be performed directly on the papilla. The sample was stored in formol. Moreover, a first mapping of the chemical phase from the top of the papilla to the deep medulla is obtained. Direct structural evidence of the presence of ACCP as a major constituent is given for the first time. This set of data, coherent with previous studies, shows that this chemical phase can be considered as one precursor in the genesis of RP.     

Inhomogeneity of calcium phosphate coatings deposited by laser ablation at high deposition rate

Calcium phosphate coatings were deposited with a KrF excimer laser onto titanium alloy to study their homogeneity. Deposition was performed at a high deposition rate under a water vapour atmosphere of 45 Pa and at a substrate temperature of 575 °C. Samples were also submitted to annealing under the same conditions of deposition for different times just after deposition. The effects of the annealing were also investigated. The morphology of the coatings was studied by scanning electron microscopy. Their structure and phase distribution was analysed by X-ray diffractometry and infrared and micro-Raman spectroscopies. Besides the non-uniform thickness, the results reveal an inhomogeneity in the spatial distribution of calcium phosphate phases in the coatings. The phase distribution can be almost completely correlated with the deposition rate. High deposition rates (0.5 nm/pulse) occurring in the centre of deposition results in the formation of amorphous calcium phosphate, while lower deposition rates favour the presence of hydroxyapatite and alpha tricalcium phosphate. At intermediate deposition rates, beta tricalcium phosphate is found, probably because the superimposed effect of energetic particles bombardment. The annealing process promotes the crystallisation of the amorphous material. The importance of the deposition rate in the phases obtained is stated after comparing these results with a previous work where homogeneous hydroxyapatite coatings were obtained under the same conditions of laser fluence, temperature and pressure, but at lower deposition rates. Received: 22 November 2001 / Accepted: 12 March 2002 / Published online: 5 July 2002 RID="*" ID="*"Corresponding author. Fax: +34-93/402-1138, E-mail: jmfernandez@fao.ub.es     

Determination of gold and silver in dross using EDXRF technique

Gold and silver in dross were determined by energy‐dispersive X‐ray fluorescence technique. Sample was prepared by pressed pellet method using microcrystalline cellulose powder as binder, and a method of standard additions was used for quantification. L_β X‐ray of gold (11.4 keV) and K_β X‐ray of silver (24.9 keV) were used for analysis. The measured concentrations of gold and silver were 132 ± 8 and 1181 ± 84 mg kg^?1, respectively. The results were validated by instrumental neutron activation analysis technique. The t‐test indicated that there was no significant difference between results obtained by the two techniques. Energy‐dispersive X‐ray fluorescence is a simple, precise and accurate technique for the determination of gold and silver in dross. Copyright © 2014 John Wiley & Sons, Ltd.     

Distribution and incorporation of zinc in biological calcium phosphates

Human dental calculi are biological calcium phosphates, which consist of an organic phase and an inorganic or mineral phase. In the latter phase, spectrochemical analyses have revealed the presence of several different magnesium and calcium phosphates. As the crystalline structure of the calculus passes through several stages during its allocation in the mouth, special attention is paid to some elements, such as zinc, that can modify the mineralization process. Several in vitro studies relating to the dental calculus mineralization process have been performed so far, but there is a lack of data obtained from biologically synthesized samples. The knowledge of the zinc distribution and incorporation in biological calcium phosphates is of great interest in providing more information about the biological process of calculus formation. In this paper we present surveys of the elemental distribution and incorporation of zinc in human dental calculus, by using a combination of different techniques: x‐ray microfluorescence using synchrotron radiation, scanning electron microscopy and x‐ray absorption spectroscopy. One‐dimensional x‐ray microfluorescence of zinc and magnesium measurement shows that there is a high accumulation of both elements in the sub‐gingival region of the calculus and a strong correlation of their spatial distribution. Experimental Ca/P molar ratios were determined by energy‐dispersive spectroscopy to identify different calcium phosphate phases, the sub‐gingival region being composed of a mixture of highly and poorly calcified phosphates and the supra‐gingival region composed mainly of carbonated hydroxyapatite. Finally, x‐ray absorption measurements were carried out at the zinc K edge on synthetic and biological samples. The Zn—O distance and coordination number of the synthetic samples and the supra‐gingival calculus show that zinc is adsorbed on these structures, whereas in the sub‐gingival samples it is allocated in a cation site. The results are indicative of the active participation of zinc in the calcification process of sub‐gingival calculus. Copyright © 2003 John Wiley & Sons, Ltd.     

X‐ray fluorescence determination of the manganese valence state and speciation in manganese ores

This work concerns determination of the manganese valence state and speciation by wavelength‐dispersive X‐ray fluorescence analysis. The authors investigated the effect of the manganese valence state and speciation on the intensity of some К‐series lines of the X‐ray emission spectrum for the samples of manganese compounds. The intensities of MnKβ₅ line and MnKβ′ satellite are least influenced by speciation, and they may be used for evaluating the manganese valence state for the samples containing low iron. The intensities of MnKβ″ and MnKβ^x satellites may be employed for assessing the manganese speciation. The results of X‐ray fluorescence determination of the manganese valence state and speciation in the manganese ores of the South Ural deposits agree with the X‐ray diffraction data. The X‐ray fluorescence method is definitely advantageous, because it does not require a complicated process of sample preparation and allows to receive fast information on the manganese valence state and speciation with the purpose to assess the quality of manganese ores. Copyright © 2015 John Wiley & Sons, Ltd.     

Single‐cell resolution in high‐resolution synchrotron X‐ray CT imaging with gold nanoparticles

Gold nanoparticles are excellent intracellular markers in X‐ray imaging. Having shown previously the suitability of gold nanoparticles to detect small groups of cells with the synchrotron‐based computed tomography (CT) technique both ex vivo and in vivo, it is now demonstrated that even single‐cell resolution can be obtained in the brain at least ex vivo. Working in a small animal model of malignant brain tumour, the image quality obtained with different imaging modalities was compared. To generate the brain tumour, 1 × 10⁵ C6 glioma cells were loaded with gold nanoparticles and implanted in the right cerebral hemisphere of an adult rat. Raw data were acquired with absorption X‐ray CT followed by a local tomography technique based on synchrotron X‐ray absorption yielding single‐cell resolution. The reconstructed synchrotron X‐ray images were compared with images obtained by small animal magnetic resonance imaging. The presence of gold nanoparticles in the tumour tissue was verified in histological sections.     

The investigation of K‐shell fluorescence parameters of Zn–Fe alloys with different grain size and microstrain values

It is known that zinc alloys with iron group metals have better corrosion resistance than pure zinc. Owing to the corrosion resistance of these alloys, Zn–Fe coatings are widely used in automotive industry and have excellent mechanical performance. In this work, we investigated the relationship between the changes in the measured X‐ray fluorescence parameters (K_β/K_α, σ_Kα and σ_Kβ) and the changes in the structural parameters such as microstrain or grain size values for Zn–Fe alloys that were prepared with different pH values. To explain these changes, the K_α and K_βX‐ray production cross sections, and the K_β/K_αX‐ray intensity ratio values were calculated by three different ways for the elemental forms of Zn and Fe. The structural parameters, such as microstrain and grain size, were also calculated. We expect that the outer shell electronic distribution affects the structural parameters of the produced Zn–Fe alloys, changing the measured K_α and K_βX‐ray production cross sections, and the K_β/K_αX‐ray intensity ratio values. We also show that Zn–Fe alloy mi nimum microstrain value corresponds to the maximum changes in K_βX‐ray production cross‐section values of Fe and Zn. Copyright © 2017 John Wiley & Sons, Ltd.     

Investigation of damaged interior walls using synchrotron‐based XPS and XANES

Evidence of internal sulfate attack in field exposure was demonstrated by the damaged interior wall of a three‐year‐old house situated in Nakhon Ratchasima Province, Thailand. Partial distension of the mortar was clearly observed together with an expansion of a black substance. Removal of the black substance revealed a dense black layer. This layer was only found in the vicinity of the damaged area, suggesting that this black material is possibly involved in the wall cracking. By employing synchrotron‐based X‐ray photoelectron spectroscopy (XPS) and X‐ray absorption near‐edge structure (XANES) techniques, the unknown sample was chemically identified. The S 2p and O 1s XPS results mutually indicated the existence of sulfate species in the materials collected from the damaged area. The XANES results indicated the presence of ferrous (II) sulfate, confirming sulfate‐induced expansion and cracking. The sulfate attack in the present case appeared to physically affect the structure whereas the chemical integrity at the molecular level of the calcium silicate hydrate phase was retained since there was a lack of spectroscopic evidence for calcium sulfate. It was speculated that internal sulfate probably originated from the contaminated aggregates used during the construction. The current findings would be beneficial for understanding the sulfate‐attack mechanism as well as for future prevention against sulfate attack during construction.     

Trace element analysis of hairs in patients with dementia

The trace elements of scalp hair samples from ≥60‐year‐old dementia patients and normal persons have been studied by X‐ray absorption near‐edge spectroscopy (XANES) in fluorescent mode and wavelength‐dispersive X‐ray fluorescence spectrometry. Comparisons of hair trace element levels of age‐matched dementia patients and normal persons revealed significantly elevated amounts of calcium, chlorine and phosphorus in dementia patients relative to normal persons. The results of XANES measurements identify the chemical forms of deposited calcium and phosphorus in the hair samples of both dementia patients and normal persons to be calcium chloride (CaCl₂) and phosphate (PO₄^3?), respectively. The amount of sulfur in hairs of dementia patients was found to be not significantly different from that in normal persons. The sulfur K‐edge XANES spectra, however, show significantly higher accumulations of sulfur in the sulfate (SO₄^2?) form in hairs of Alzheimer's disease and Parkinson's disease dementia patients. This study presents the possible roles of calcium, chlorine, phosphorus and sulfur in the etiology of dementia in elderly patients.     

Bioactive coating on titanium implants modified by Nd:YVO4 laser

Apatite coating was applied on titanium surfaces modified by Nd:YVO₄ laser ablations with different energy densities (fluency) at ambient pressure and atmosphere. The apatites were deposited by biomimetic method using a simulated body fluid solution that simulates the salt concentration of bodily fluids. The titanium surfaces submitted to the fast melting and solidification processes (ablation) were immersed in the simulated body fluid solution for four days. The samples were divided into two groups, one underwent heat treatment at 600 °C and the other dried at 37 °C. For the samples treated thermally the diffractograms showed the formation of a phase mixture, with the presence of the hydroxyapatite, tricalcium phosphate, calcium deficient hydroxyapatite, carbonated hydroxyapatite and octacalcium phosphate phases. For the samples dried only the formation of the octacalcium phosphate and hydroxyapatite phases was verified. The infrared spectra show bands relative to chemical bonds confirmed by the diffraction analyses. The coating of both the samples with and without heat treatment present dense morphology and made up of a clustering of spherical particles ranging from 5 to 20 μm. Based on the results we infer that the modification of implant surfaces employing laser ablations leads to the formation of oxides that help the formation of hydroxyapatite without the need of a heat treatment.     

A miniature X‐ray tube approach to measuring lead in bone using L‐XRF

Using a miniature X‐ray tube and silicon PiN diode detector, an approach to measuring lead (Pb) in bone phantoms was tested. The X‐ray tube was used to excite L‐line X‐ray fluorescence (L‐XRF) of lead in bone phantoms. The bone phantoms were made from plaster of Paris and dosed with varying quantities of lead. Phantoms were made in two sets with different shapes to model different bone surfaces. One set of bone phantoms was circular in cross‐section (2.5‐cm diameter), the other square in cross‐section (2.2 cm × 2.2 cm). Using an irradiation time of 180 s (real time), five trials were run for each bone phantom. Analysis was performed for both Lα and Lβ lead X‐rays. Based on these calibration trials, (3σ₀/slope) minimum detection limits of 7.4 ± 0.3 µg Pb g^?1 (circular cross‐section) and 8.6 ± 0.6 µg Pb g^?1 (square cross‐section) were determined for the bare bone phantoms. To simulate a more realistic in vivo scenario with soft tissue overlying bone, further trials were performed with a resin material placed between the experimental system and the bone phantom. For the square cross‐section bone phantoms, a layer of resin with a thickness of 1.2 mm was used, and a minimum detection limit of 17 ± 3 µg Pb g^?1 determined. For the circular cross‐section phantoms, a layer of resin with an average thickness of 2.7 mm was used. From these, a more realistic minimum detection limit for in vivo applications (43 ± 7 µg Pb g^?1) was determined. Copyright © 2011 John Wiley & Sons, Ltd.     

Preparation of nanostructured manganese-doped biphasic calcium phosphate powders via sol–gel method

Biphasic calcium phosphate ceramics doped with manganese (Mn-doped BCP) were prepared by using chemical doping via sol–gel technique. Four different concentrations of manganese (2, 5, 10, and 15 mol%) have been successfully incorporated into biphasic calcium phosphate (BCP) phases. X-ray diffraction analysis revealed that the phases present in the Mn-doped BCP powders are hydroxyapatite and β-tricalcium phosphate. The Mn-doped powders are more crystalline than Mn-free BCP powder as its crystallinity increased with increasing Mn content. Fourier transform infrared spectrum corresponded to this result as the peak resolutions of PO₄ bands are viewed with more intensity with the increased Mn. Particle size analysis resulted in nanoscale particles for the Mn-doped and Mn-free BCP powders. From field emission scanning electron microscope observation, Mn-doped BCP powders showed nanoscale individual particles but tightly agglomerated into microscale aggregates due to progressive fusion of particles. Hence, it can be concluded that Mn acts as calcination additives of the BCP powders.     

Raman and X‐ray investigations of the incorporation of Ca2+ and Cd2+ in the ZrO2 structure

The formation of solid solution and ZrO₂ phase stabilization were investigated by Raman spectroscopy and X‐ray diffraction (XRD) in calcium‐containing and cadmium‐containing zirconium oxide samples heated at 1073 K in air. The adopted preparation procedure led to the incorporation of calcium and cadmium in solid solution into the zirconia structure. The solid solution favored the tetragonal and cubic zirconia phases at the expense of the thermodynamically stable monoclinic modification. Combined macro‐ and micro‐Raman spectroscopy disclosed that instead of forming a homogeneous phase t″, intermediate between the tetragonal t′ and the cubic phase, the tetragonal and cubic phases coexisted in the range 9.49–13.89 mol% for Ca and 11.88–17.23 mol% for Cd. At higher dopant contents the cubic form stabilized. The impurity content necessary to stabilize the high‐symmetry phases was defined. Copyright © 2007 John Wiley & Sons, Ltd.     

Optical performance of materials for X‐ray refractive optics in the energy range 8–100 keV

A quantitative analysis of the crucial characteristics of currently used and promising materials for X‐ray refractive optics is performed in the extended energy range 8–100 keV. According to the examined parameters, beryllium is the material of choice for X‐ray compound refractive lenses (CRLs) in the energy range 8–25 keV. At higher energies the use of CRLs made of diamond and the cubic phase of boron nitride (c‐BN) is beneficial. It was demonstrated that the presence of the elements of the fourth (or higher) period has a fatal effect on the functional X‐ray properties even if low‐Z elements dominate in the compound, like in YB₆₆. Macroscopic properties are discussed: much higher melting points and thermal conductivities of C and c‐BN enable them to be used at the new generation of synchrotron radiation sources and X‐ray free‐electron lasers. The role of crystal and internal structure is discussed: materials with high density are preferable for refractive applications while less dense phases are suitable for X‐ray windows. Single‐crystal or amorphous glass‐like materials based on Li, Be, B or C that are free of diffuse scattering from grain boundaries, voids and inclusions are the best candidates for applications of highly coherent X‐ray beams.     

In vivo high‐resolution synchrotron radiation imaging of collagen‐induced arthritis in a rodent model

In vivo microstructures of the affected feet of collagen‐induced arthritic (CIA) mice were examined using a high‐resolution synchrotron radiation (SR) X‐ray refraction technique with a polychromatic beam issued from a bending magnet. The CIA models were obtained from six‐week‐old DBA/1J mice that were immunized with bovine type II collagen and grouped as grades 0–3 according to a clinical scoring for the severity of arthritis. An X‐ray shadow of a specimen was converted into a visual image on the surface of a CdWO₄ scintillator that was magnified using a microscopic objective lens before being captured with a digital charge‐coupled‐device camera. Various changes in the joint microstructure, including cartilage destruction, periosteal born formation, articular bone thinning and erosion, marrow invasion by pannus progression, and widening joint space, were clearly identified at each level of arthritis severity with an equivalent pixel size of 2.7 µm. These high‐resolution features of destruction in the CIA models have not previously been available from any other conventional imaging modalities except histological light microscopy. However, thickening of the synovial membrane was not resolved in composite images by the SR refraction imaging method. In conclusion, in vivo SR X‐ray microscopic imaging may have potential as a diagnostic tool in small animals that does not require a histochemical preparation stage in examining microstructural changes in joints affected with arthritis. The findings from the SR images are comparable with standard histopathology findings.     

Characterization and biocompatibility of fluoridated biphasic calcium phosphate ceramics

Biphasic calcium phosphate ceramics (BCP) has been widely used in tooth and bone implants due to its excellent biocompatibility. Incorporation of fluorine ions in BCP has drawn much attention because of the beneficial role played by the fluorine ions in bone and tooth growth. The aim of this study was to obtain fluoridated biphasic calcium phosphate (FBCP) by immersing BCP into saturated ZnF₂ solution with F⁻ concentration of 3500 mg/l at different times. The phase and incorporation of fluoride into BCP were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and scanning electron microscope (SEM). The biomineralization and influence of FBCP on osteoblastic behavior were evaluated and compared with that of biphasic calcium phosphate (BCP). The results exhibited that the phase evolution of the BCP was affected by the fluoride incorporation and the FBCP significantly improved the differentiation and proliferation of osteoblasts. These findings suggest that the FBCP would be very useful as a bone reconstructive material.