Converting of the 2D graphene to its 3D by chicken red blood cells as sheets separator for construction supercapacitor electrode

Here, we report on a facile green and scalable method for the fabrication of porous 3D graphene as a well-known carbon-based material used in many energy storage devices. Chicken red blood cells were used as sheets spacer and heteroatom sources in the construction of 3D graphene. First, the red blood cells were separated from the blood and mixed with graphene oxide. Then, the mixture was freeze-dried and carbonized at 700 °C. The resulted 3D graphene containing heteroatoms was used as a supercapacitor electrode modifier on a glassy carbon electrode and tested with various electrochemical techniques. The supercapacitor electrode showed a specific capacitance of 330 F g⁻¹ at a current density of 1 A g⁻¹, maximum power density of 1958 W kg⁻¹, and maximum energy density of 85 Wh kg⁻¹. Furthermore, the supercapacitive performances were tested in a two-electrode symmetrical system which exhibited a specific capacitance of 238 F g⁻¹ for 1 A g⁻¹. It also showed a power density of 2200 W kg⁻¹ and an appreciable energy density of 160 Wh kg⁻¹. The excellent electrochemical behavior of 3D graphene indicates the promising abilities of the composite for other applications such as biosensors, batteries, electrocatalysts, etc.     

Improved catalytic activity of Pt/rGO counter electrode in In2O3-based DSSC

A platinum/reduced graphene oxide (Pt/rGO) nanocomposite acting as a counter electrode (CE) was fabricated using a chemical bath deposition method for In₂O₃-based dye-sensitized solar cell (DSSC) via sol-gel technique. The report analyzes the morphological and electrochemical impedance spectroscopy of the annealing Pt/rGO films at 350, 400, and 450 °C. Micrograph images obtained from field emission scanning electron microscopy demonstrated the annealed films are highly porous. The energy-dispersive X-ray results show that the carbon atoms were homogeneously distributed on the film annealed at 400 °C. A good photovoltaic performance was exhibited with high photocurrent density of 8.1 mA cm⁻² and power conversion efficiency (η) of 1.68 % at the Pt/rGO CE annealed at 400 °C. The employed electrochemical impedance spectroscopy analysis quantifies that the Pt/rGO films annealed at 400 °C provide more efficient charge transfer with the lowest effective recombination rate and high electron life time, hence improving the performance of Pt/rGO CE.

     

Sonochemically synthesized MnO2 nanoparticles as electrode material for supercapacitors

In this study, manganese oxide (MnO₂) nanoparticles were synthesized by sonochemical reduction of KMnO₄ using polyethylene glycol (PEG) as a reducing agent as well as structure directing agent under room temperature in short duration of time and characterized by powder X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Scanning electron microscope (SEM), Transmission electron microscopy (TEM) and Brunauer–Emmett–Teller (BET) analysis. A supercapacitor device constructed using the ultrasonically-synthesized MnO₂ nanoparticles showed maximum specific capacitance (SC) of 282 Fg⁻¹ in the presence of 1 M Ca(NO₃)₂ as an electrolyte at a current density of 0.5 mA cm⁻² in the potential range from 0.0 to 1.0 V and about 78% of specific capacitance was retained even after 1000 cycles indicating its high electrochemical stability.     

Synthesis and performance of nickel hydroxide nanodiscs for redox supercapacitors

Herein, we report the facile synthesis of β-Ni(OH)₂ nanodiscs by chemical precipitation method and their use in supercapacitors. β-Ni(OH)₂ nanodiscs are characterized by FTIR, XRD, FESEM, XPS and TGA analysis. Morphological analysis revealed the uniform nanodisc morphology of β-Ni(OH)₂. The supercapacitor behavior is evaluated by cyclic voltammetry, galvanostatic charge–discharge, and electrochemical impedance spectroscopy measurements in 1-M aqueous KOH solution with 0- to 0.6-V potential window. The specific capacitance of β-Ni(OH)₂ nanodiscs is found to be 400 F g⁻¹. The energy and power densities of the β-Ni(OH)₂ nanodiscs are found to be 7.15 W h kg⁻¹ and 1716 W kg⁻¹, respectively, at the current density of 1 A g⁻¹. The cycle life test shows the good stability of the electrode with 83 % retention capacitance even after 1500 cycles.

     

Cathodic performance of V2O5 nanowires and reduced graphene oxide composites for lithium ion batteries

In this study, vanadium pentoxide (V₂O₅) nanowires (NWs) with a diameter of 100–200 nm and a length of up to several micrometers as cathode for lithium ion batteries are synthesize using an electrospinning method. The reduced graphene oxide (rGO) and V₂O₅ NWs (GVO) composites are form by wet mixing the electrospun V₂O₅ NWs and rGO. Surface morphologies, microstructure and elemental mapping, and chemical bonding states of the composites are characterize. The initial and 60 cycles discharge capacities of GVO composite composed of 1 wt% rGO show up to 225 mAh g⁻¹ and 125 mAh g⁻¹, even higher than pure V₂O₅ NWs, when the lithium ion battery cycled between 2.0 and 4.0 V with a rate of 0.2 C, because of highly conductive rGO. The GVO composite could be promising as a high performance cathode for lithium ion batteries.     

Template-free synthesis of MnO2 nanowires with secondary flower like structure: Characterization and supercapacitor behavior studies

Manganese dioxide (MnO₂) nanowires with diameter about 30-70 nm is achieved via a two-step process: first, template-free cathodic electrodeposition from aqueous solution of Mn(NO₃)₂ on steel substrate and followed by heat treatment. The temperature-annealed sample was studied by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM) methods and Fourier transform infrared (FT-IR) spectroscopy. The electrochemical performance of the MnO₂ sample was studied by cyclic voltammetry (CV) and chronopotentiometry in Na₂SO₄ solutions. The sample showed excellent supercapacitive behavior. The specific capacitance (SC) of 237 F g⁻¹ in a potential window of 0-0.9V was obtained at the scan rate of 2 mV s⁻¹. The SC calculated from the chronopotentiometry data is about 246 F g⁻¹. The SC was decreased by 16% after 1000 cycles.     

Transition of hexagonal to square sheets of Co3O4 in a triple heterostructure of Co3O4/MnO2/GO for high performance supercapacitor electrode

Cobalt oxide and manganese oxides are promising electrode materials amongst the transition metal oxides (TMOs) for pseudocapacitors. The lack of reversibility and deterioration of capacitance at higher current densities is major flaw in Co₃O₄ as an electrode for supercapacitor while MnO₂ suffers from low electrical conductivity and poor cycling stability. It is inevitable to bridge the performance gap between these two TMOs to obtain a high performance supercapacitor based on environmental benign and earth abundant materials. Herein, we fabricated a hybrid triple heterostructure high-performing supercapacitor based on hexagonal sheets of Co₃O₄, MnO₂ nanowires and graphene oxide (GO) to form a composite structure of Co₃O₄/MnO₂/GO by all hydrothermal synthesis route. The Co₃O₄ square sheets serves as an excellent backbone with good mechanical adhesion with the current collector providing a rapid electronic transfer channel while the integrated nanostructure of MnO₂ NW/GO permits more electrolyte ions to penetrate capably into the hybrid structure and allows effective utilization of more active surface areas. A triple heterostructured device exhibits a high areal capacitance of 3087 mF cm⁻² at 10 mV s⁻¹ scan rate along with the exceptional rate capability and cycling stability having capacitance retention of ∼170% after 5000 charge/discharge cycles. The TMOs based pseudocapacitor with the conducting scaffolds anchoring based on graphene derivatives like this will pave an encouraging alternatives for next generation energy storage devices.     

Amorphous Cobalt Boride Alloy Synthesized by Liquid Phase Methods as Electrode Materials for Electrochemical Capacitors

An amorphous cobalt boride alloy with high electronic conductivity is fabricated through the liquid-phase reduction method. Benefiting from large specific surface area and hierarchical pore structure, the as-synthesized Co-B nanoflakes expose substantial electrochemical active sites, promote the transfer of electrons and ions, and accelerate the redox kinetic process. The as-obtained amorphous Co-B alloy sample displays a specific capacitance of 411 F g⁻¹ at 0.5 A g⁻¹, and with the current density increased to 10 A g⁻¹, it maintains 69% of the initial capacitance. The as-assembled asymmetric supercapacitor device reveals electrochemical properties comprising an excellent specific capacitance of 64.3 F g⁻¹ at 0.25 A g⁻¹, superior cyclical stability of 105% after 20,000 cycles at 3 A g⁻¹, and maximum energy density of 22.9 Wh kg⁻¹ at a power density of 200.3 W kg⁻¹. This study demonstrates great potential in developing high-conductivity materials for an asymmetric supercapacitor through utilizing an amorphous cobalt boride alloy as a promising electrode material.     

Ultrasonic preparation and nanosheets supported binary metal oxide nanocomposite for the effective application towards the electrochemical sensor

Binary metal oxides (La₂O₃@SnO₂) decorated reduced graphene oxide nanocomposite was synthesized by ultrasound process in an environmentally benign solvent with a working frequency of 25 and 40 kHz (6.5 l200 H, Dakshin, India and maximum input power 210 W). Further, to enhance the electrocatalytic activity, the reduced graphene oxide (rGO) was prepared from graphene oxide by ultrasonication method. As prepared La₂O₃@SnO₂/rGO was scrutinized using XRD, TEM, EDX and quantitative test for the structural and morphology properties. As modified La₂O₃@SnO₂/rGO nanocomposite exhibits better electrochemical activity towards the oxidation of methyl nicotinate with higher anodic current compared to other modified and unmodified electrode for the detection of methyl nicotinate with larger linear range (0.035–522.9 µM) and lower limit of detection (0.0197 µM). In addition, the practical feasibility of the sensor was inspected with biological samples, reveals the acceptable recovery of the sensor in real samples.     

Anchoring alpha-manganese oxide nanocrystallites on multi-walled carbon nanotubes as electrode materials for supercapacitor

The partial coverage of manganese oxide (MnO₂) particles was achieved on the surfaces of multi-walled carbon nanotubes (MWCNTs) through a facile hydrothermal process. These particles were demonstrated to be alpha-manganese dioxide (α-MnO₂) nanocrystallites, and exhibited the appearance of the whisker-shaped crystals with the length of 80–100 nm. In such a configuration, the uncovered CNTs in the nanocomposite acted as a good conductive pathway and the whisker-shaped MnO₂ nanocrystallites efficiently increased the contact of the electrolyte with the active materials. Thus, the highest specific capacitance of 550 F g⁻¹ was achieved using the resulting nanocomposites as the supercapacitor electrode. In addition, the enhancement of the capacity retention was observed, with the nanocomposite losing only 10% of the maximum capacity after 1,500 cycles.     

Contact resistance of multi-walled carbon nanotube/natural rubber nanocomposites with metallic ball

This paper reports on the contact resistance (R_c) between carbon filler/natural rubber (NR) nanocomposite and gold ball: three varieties of nanocomposites were prepared from carbon black (CB) and two kinds of multi-walled carbon nanotubes (MWCNTs) with different diameter. R_c of MWCNT/NR nanocomposite was remarkably less than that of CB/NR nanocomposites. The relationship between R_c of MWCNT/NR nanocomposites and applied load was expressed in the formula, R_c=C·P⁻ⁿ (P: load, C and n: constant): for the MWCNTs (diameters of 13 nm)/NR and MWCNTs (diameters of 67 nm)/ NR nanocomposites, they were expressed as R_c=1724·P^−0.6 and R_c=344·P^−0.37, respectively. The former (MWCNT, ϕ13 nm) showed higher R_c than the latter (MWCNT, ϕ67 nm) over whole region of applied load. The mechanical hardness of the former was higher (90 HsA) than that of the latter (82 HsA). Therefore, the smaller contact area between the nanocomposite and gold ball of the former resulted in higher R_c. The apparent specific contact resistivity was calculated from the observed values of R_c and contact area: 130 Ω mm² and 127 Ω mm² for the former (MWCNT, ϕ13 nm) and the latter (MWCNT, ϕ67 nm), respectively.     

Synthesis of NiCo2S4 nanospheres/reduced graphene oxide composite as electrode material for supercapacitor

The NiCo₂S₄ nanospheres arrayed on the surface of reduced graphene oxide (rGO) was fabricated via one-step hydrothermal method. The effect of initial feeding mass of Ni(NO₃)₂·6H₂O and Co(NO₃)₂·6H₂O to rGO on the microstructure and electrochemical performance of the as-prepared composites was studied. The results indicated that the specific capacitances of the composites were first increased and then reduced due to the aggregation of NiCo₂S₄ nanospheres. NiCo₂S₄ nanospheres/rGO composites exhibited a remarkable specific capacitance of 1406 F/g and excellent cyclic stability of 82.36% at the current density of 1 A/g, which were better than those of individual NiCo₂S₄ (792 F/g and 64.77%) counterpart. These results showed that the as-prepared NiCo₂S₄ nanospheres/rGO composites were outstanding candidate for electrode material of supercapacitors.     

Facile Construction of 3D Reduced Graphene Oxide Wrapped Ni3S2 Nanoparticles on Ni Foam for High‐Performance Asymmetric Supercapacitor Electrodes

3D reduced graphene oxide (rGO)‐wrapped Ni₃S₂ nanoparticles on Ni foam with porous structure is successfully synthesized via a facile one‐step solvothermal method. This unique structure and the positive synergistic effect between Ni₃S₂ nanoparticles and graphene can greatly improve the electrochemical performance of the NF@rGO/Ni₃S₂ composite. Detailed electrochemical measurements show that the NF@rGO/Ni₃S₂ composite exhibits excellent supercapacitor performance with a high specific capacitance of 4048 mF cm^?2 (816.8 F g^?1) at a current density of 5 mA cm^?2 (0.98 A g^?1), as well as long cycling ability (93.8% capacitance retention after 6000 cycles at a current density of 25 mA cm^?2). A novel aqueous asymmetric supercapacitor is designed using the NF@rGO/Ni₃S₂ composite as positive electrode and nitrogen‐doped graphene as negative electrode. The assembled device displays an energy density of 32.6 W h kg^?1 at a power density of 399.8 W kg^?1, and maintains 16.7 W h kg^?1 at 8000.2 W kg^?1. This outstanding performance promotes the as‐prepared NF@rGO/Ni₃S₂ composite to be ideal electrode materials for supercapacitors.     

Free-standing 3D Co3O4@NF micro-flowers composed of porous ultra-long nanowires as an advanced cathode material for supercapacitor

The development of smart structured cathode materials for supercapacitors (SCs) has sparked tremendous interest. However, the appropriate design to achieve high capacitance and energy density-based cathode materials remains a major problem for energy storage systems. This article describes the effective synthesis of self-supported 3D micro-flowers composed of ultrathin nanowires array of Co₃O₄ on Ni foam (NF) using hydrothermal conditions (Co₃O₄@NF). The mesoporous Co₃O₄@NF with a high surface area, providing a rich active state for the Faraday redox reaction and increasing the diffusion rate of the electrolyte ions. The optimized Co₃O₄@NF-16h electrode exhibited supreme electrochemical performance by delivering a high specific capacitance of 1878, (1127) and 1200 (720 C g⁻¹) F g⁻¹ at 1.0 and 20 A g⁻¹, respectively. The Co₃O₄@NF electrode retained good capacitance stability of 91% over 10000 cycles at 20 A g⁻¹ with excellent rate-performance of 67% at 20 folded high current values. The obtained results for the Co₃O₄@NF electrode are presented the enhanced pseudocapacitive performance, indicating the substantial potential for high-performance supercapacitor applications.     

Charge storage performance of lithiated iron phosphate/activated carbon composite as symmetrical electrode for electrochemical capacitor

In this study, a symmetric electrochemical capacitor was fabricated by adopting a lithium iron phosphate (LiFePO₄)-activated carbon (AC) composite as the core electrode material in 1.0 M Na₂SO₃ and 1.0 M Li₂SO₄ aqueous electrolyte solutions. The composite electrodes were prepared via a facile mechanical mixing process. The structural properties of the nanocomposite electrodes were characterised by scanning electron microscopy (SEM) and Brunauer–Emmett–Teller (BET) analysis. The electrochemical performances of the prepared composite electrode were studied using cyclic voltammetry (CV), galvanostatic charge–discharge (CD) and electrochemical impedance spectroscopy (EIS). The experimental results reveal that a maximum specific capacitance of 112.41 F/g was obtained a 40 wt% LiFePO₄ loading on an AC electrode compared with that of a pure AC electrode (76.24 F/g) in 1 M Na₂SO₃. The improvement in the capacitive performance of the 40 wt% LiFePO₄–AC composite electrode is believed to be attributed to the contribution of the synergistic effect of the electric double layer capacitance (EDLC) of the AC electrode and pseudocapacitance via the intercalation/extraction of H⁺, OH⁻, Na⁺ and SO₃²⁻ and Li⁺ ions in LiFePO₄ lattices. In contrast, it appears that the incorporation of LiFePO₄ into AC electrodes does not increase the charge storage capability when Li₂SO₄ is used as the electrolyte. This behaviour can be explained by the fact that the electrolyte system containing SO₄²⁻ only exhibits EDLC in the Fe-based electrodes. Additionally, Li⁺ ions that have lower conductivity and mobility may lead to poorer charge storage capability compared to Na⁺ ions. Overall, the results reveal that the AC composite electrodes with 40 wt% LiFePO₄ loading on a Na₂SO₃ neutral electrolyte exhibit high cycling stability and reversibility and thus display great potential for electrochemical capacitor applications.     

Electrochemical redox supercapacitors using PVdF-HFP based gel electrolytes and polypyrrole as conducting polymer electrode

Electrochemical redox supercapacitors have been fabricated using polymeric gel electrolytes polyvinylidene fluoride co-hexafluoropropylene (PVdF-HFP)–ethylene carbonate (EC)–propylene carbonate (PC)–MClO₄: M = Li, Na, (C₂H₅)₄N and electrochemically deposited polypyrrole as conducting polymer electrode. The performance of the capacitors have been characterized using a.c impedance spectroscopy, cyclic linear sweep voltammetry and galvanostatic charge–discharge techniques. The capacitors shows larger values of overall capacitance of about 14–25 mF cm^− 2 (equivalent to a single electrode specific capacitance of 78–137 F g^− 1 of polypyrrole), which corresponds to the energy density of 11–19 W h kg^− 1 and power density of 0.22–0.44 kW kg^− 1. The values of capacitance have been found to be almost stable up to 5000 cycles and even more. A comparison indicates that the capacitive behaviour and the capacitance values are not much affected with the size of cations of the salts incorporated in gel electrolytes, rather predominant role of anions is possible at the electrode–electrolyte interfaces. Furthermore the coulombic efficiencies of all the cells were found to be nearly 100% that is comparable to the liquid electrolytes based capacitors.     

Cobalt terephthalate MOF-templated synthesis of porous nano-crystalline Co3O4 by the new indirect solid state thermolysis as cathode material of asymmetric supercapacitor

In this work, two different types of Co₃O₄ nano-crystals were synthesized by (i) conventional direct solid state thermolysis of cobalt terephthalate metal-organic framework (MOF-71) and (ii) new indirect solid state thermolysis of Co(OH)₂ derived by alkaline aqueous treatment of MOF-71. The products were then characterized by X-ray diffraction technique (XRD), Fourier transforms infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), Reflection electron energy loss spectroscopy (REELS), Brunauer, Emmett, and Teller (BET), scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDX) techniques. By REELS analysis the energy band gap of MOF-71 was determined to be 3.7 eV. Further, electrochemical performance of each Co₃O₄ nanostructure was studied by the cyclic voltammetry (CV), galvanostatic charge-discharge (GCD), and electrochemical impedance spectroscopy (EIS) in a three-electrode system in KOH electrolyte. An asymmetric supercapacitor was fabricated using indirect Co₃O₄ nanoparticles as cathode and electrochemically reduced graphene oxide as anode, and the electrochemical properties were studied and showed a high energy density of 13.51 Wh kg⁻¹ along with a power density of 9775 W kg⁻¹ and good cycling stability with capacitance retention rate of 85% after 2000 cycles.     

Synthesis of RGO/Cu8S5/PPy Composite Nanosheets with Enhanced Peroxidase‐Like Activity for Sensitive Colorimetric Detection of H2O2 and Phenol

In this paper, a novel strategy for the fabrication of reduced graphene oxide (rGO)/Cu₈S₅/polypyrrole (PPy) composite nanosheets with Cu₈S₅ nanoparticles and PPy layer anchored on the surface of rGO as peroxidase‐like nanocatalyst is reported. During the synthesis, graphene oxide (GO)/CuO composite nanosheets are prepared first and used as templates, then the sulfuration of CuO and polymerization of pyrrole are accompanied with the reduction of GO, resulting in ternary rGO/Cu₈S₅/PPy composite nanosheets. The synthesized Cu₈S₅ nanoparticles with a diameter in the range from tens to hundreds of nanometers are dispersed within PPy decorated rGO nanosheets. The resultant ternary rGO/Cu₈S₅/PPy composite nanosheets exhibit a higher peroxidase‐like catalytic activity toward the oxidation of 3,3′,5,5′‐tetramethylbenzidine in the presence of H₂O₂ than GO/CuO and rGO/CuS composite nanosheets, revealing a synergistic effect on their activity. The as‐prepared rGO/Cu₈S₅/PPy platform provides a simple colorimetric approach for the detection of H₂O₂ and phenol with a high sensitivity. This work offers a new way for the fabrication of rGO‐based nanocomposite with superior enzyme‐like activity, which displays great potential applications in biocatalysis and environmental monitoring.     

Flower-like Ni3(NO3)2(OH)4@Zr-metal organic framework (UiO-66) composites as electrode materials for high performance pseudocapacitors

Zr-metal organic frameworks (Zr-MOFs, UIO-66) as a kind of crystalline porous material possess controllable porous structure and strong thermal stability up to 753 K. In this paper, we synthesized Ni₃(NO₃)₂(OH)₄, Zr-MOF with high specific surface area (1073 m² g⁻¹) and Ni₃(NO₃)₂(OH)₄@Zr-MOF composite for pseudocapacitor material. X-ray diffraction (XRD) and scanning electron microscopy (SEM) were taken to characterize the structure and morphology of Ni₃(NO₃)₂(OH)₄, Zr-MOF, and Ni₃(NO₃)₂(OH)₄@Zr-MOF. The porous structure of Zr-MOF favors the utilization of the active material Ni₃(NO₃)₂(OH)₄ and interfacial charge transport and provides short diffusion paths for ions, which results in a high specific capacitance. Electrochemical properties are evaluated by cyclic voltammetry (CV) and galvanostatic charge/discharge measurement. A maximum specific capacitance (SC) of 992 F/g was obtained from CV at a scan rate of 5 mVs⁻¹, which is higher than Zr-MOF (∼134 F g⁻¹) and Ni₃(NO₃)₂(OH)₄ (∼753 F g⁻¹). Meanwhile, the Ni₃(NO₃)₂(OH)₄@Zr-MOF composite electrode exhibits a good cycling stability over 3000 cycles.

     

Preparation of MnO<Subscript>2</Subscript>/WMNT composite and MnO<Subscript>2</Subscript>/AB composite by redox deposition method and its comparative study as supercapacitive materials

The manganese oxide/multi-walled carbon nanotube (MnO₂/MWNT) composite and the manganese oxide/acetylene black (MnO₂/AB) composite were prepared by translating potassium permanganate into MnO₂ which formed the above composite with residual carbon material using the redox deposition method and carbon as a reducer. The products were characterized by X-ray diffraction, Fourier transform infrared, and scanning electron microscope. Electrochemical properties of both the MnO₂/MWNT and MnO₂/AB electrodes were studied by using cyclic voltammetry, electrochemical impedance measurement, and galvanostatic charge/discharge tests. The results show that the MnO₂/MWNT electrode has better electrochemical capacitance performance than the MnO₂/AB electrode. The charge–discharge test showed the specific capacitance of 182.3 F·g⁻¹ for the MnO₂/MWNT electrode, and the specific capacitance of 127.2 F·g⁻¹ for the MnO₂/AB electrode had obtained, within potential range of 0–1 V at a charge/discharge current density of 200 mA·g⁻¹ in 0.5 mol·L⁻¹ potassium sulfate electrolyte solution in the first cycle. The specific capacitance of both the MnO₂/MWNT and MnO₂/AB electrodes were 141.2 F·g⁻¹ and 78.5 F·g⁻¹ after 1,200 cycles, respectively. The MnO₂/MWNT electrode has better cycling performance. The effect of different morphologies was investigated for both MnO₂/MWNT and MnO₂/AB composites.