后退火处理对铟锡氧化物表面等离激元共振特性的影响

近年来,表面等离激元光子学发展迅速,并取得了众多新成果.重掺杂半导体材料的表面等离激元共振性质的研究,也得到了人们越来越多的关注.本文通过纳米球刻印技术制备准三维二氧化硅纳米球阵列,在阵列上沉积铟锡氧化物薄膜,通过不同条件下的后退火处理改变铟锡氧化物薄膜的载流子浓度和载流子迁移率,并研究随着材料性质的改变其相应表面等离激元共振特性的变化规律.结果表明：退火处理均使铟锡氧化物薄膜的晶粒长大,光学透过率增加;在空气中退火会导致铟锡氧化物薄膜的载流子浓度减少,其表面等离激元共振峰红移;而真空退火则使铟锡氧化物薄膜的载流子浓度增加,共振峰蓝移.这些研究结果可为后续铟锡氧化物表面等离激元材料及器件的研究提供科学依据和实际指导.     

高负偏光照稳定性的溶液法像素级IZTO TFT

采用溶液法制备了铟锌锡氧化物(indium-zinc-tin-oxide, IZTO)有源层薄膜和铪铝氧化物(hafnium-aluminum oxide, HAO)绝缘层薄膜,并成功应用于背沟道刻蚀结构(back-channel etched, BCE)IZTO薄膜晶体管(thinfilm transistor, TFT)像素阵列.利用N2O等离子体表面处理钝化IZTO缺陷态,提升溶液法像素级IZTO TFT器件性能,特别是光照负偏压稳定性.结果表明,经N2O等离子体处理后,器件饱和迁移率提升了接近80%,达到51.52 cm~2·V^–1·s^–1.特别是3600 s光照负偏压稳定性从–0.3 V提升到–0.1 V,满足显示驱动的要求.这进一步说明经N₂O等离子体处理后能够得到良好的溶液法像素级IZTO TFT阵列.     

交流驱动的绿光透明有机电致发光器件

采用半透明的镁银合金阴极成功制备了直流驱动的绿光透明有机电致发光器件,并在此基础上,提出利用半透明的镁银合金中间连接层连接两个发光子单元的新型器件结构,从而成功实现了交流驱动的绿光透明有机电致发光器件。在铟锡氧化物和镁银合金两侧的出光方向上,器件的光谱完全一致,最大亮度分别达到1 374 cd/m~2和283 cd/m~2,最高效率分别达到26.1 cd/A(8.1 lm/W)和3.5 cd/A(1.7 lm/W),铟锡氧化物一侧的性能较好是由于铟锡氧化物电极和镁银合金中间连接层的透过率不同形成的。在低频交流电驱动下,器件的两个发光子单元交替发出绿光;而在高频交流电驱动下,由于人眼无法分辨交替点亮时的闪烁,两个发光子单元对于人眼而言则是同时且稳定地发出绿光。     

前端接触势垒高度对非晶硅和微晶硅异质结太阳电池的影响

运用AMPS-1D（Analysis of Microelectronic and Photonic Structures） 程序系统分析了前端接触（铟锡氧化物）的势垒分别对非晶硅和微晶硅太阳电池性能的影响,比较了两种影响的差异并分析了具体原因. 研究表明：与微晶硅相比,非晶硅受铟锡氧化物功函数Φ_ITO的影响更加显著. 随着Φ_ITO的增加非晶硅的各项物理性能（如太阳电池效率、填充因子等）得到明显改善,而微晶硅的各项参数虽然也随Φ_ITO增加而改变,但更容易趋于饱和. 模拟结果显示,在实际的太阳电池装备过程中可根据前端电极的性能来选择合适的p型硅材料. 关键词： 铟锡氧化物 非晶硅 微晶硅 计算机模拟     

ITO导电薄膜透明图案对比度增强方法

铟锡氧化物(Indium Tin Oxide,ITO)导电层是触控显示技术的绝对定位元件,为保障定位的灵敏性和准确性,需对导电层表面缺陷进行质量检测.本文针对导电层透明区域机器视觉自动检测存在的问题,提出了图案对比度增强的方法.该方法首先利用ITO材料的光谱属性及其表面光学特性,设计出用于ITO导电层检测的近红外同轴光照明,将图像对比度从零提高到4.5%.在通过光学方法实现了对比度从无到有的转变后,充分利用数字图像预处理的优势,结合基于小波变换的非线性增强方法,最终成功将对比度提高至16%,为后续ITO导电层缺陷的分析和识别提供了良好保障.     

ITO退火对GaN基LED电学特性的影响

近些年来,越来越多的发光二极管采用铟锡氧化物(ITO)作为电流扩展层,但是如果不对其进行任何处理,得到的发光二极管的电学特性很差,要得到好的电学特性需要对长有铟锡氧化物的发光二极管进行退火处理.针对不同的退火时间和退火温度对发光二极管的电学特性影响不同的问题,通过测量不同条件下退火得到的发光二极管的理想因子和串联电阻, 根据Shah等人提出的模型进行分析,推测出铟锡氧化物和P型氮化镓的接触特性.结果表明:发光二极管的电学特性开始随着退火温度的升高和时间的增加到达一个优值,如果继续增加温度或者时间都会导致发光二极管电学特性的下降.这样有利于优化退火温度和时间, 得到电学性能较好的器件.     

原子力显微镜与x射线光电子能谱对LiBq4/ITO和LiBq4/CuPc/ITO的表面分析

利用原子力显微镜对8-羟基喹啉硼化锂(LiBq4)/铟锡氧化物和8-羟基喹啉硼化锂/酞菁铜(CuPc)/铟锡氧化物表面分别进行了扫描,显示了LiBq4在不同衬底上的形貌差异,并进一步利用样品表面的x射线光电子能谱图验证了这一差异.实验表明,CuPc层的加入改善了LiBq4的成膜质量,并将这种改善归因于分子构型与电子亲和势的不同.     

基于MoO_3/Au/MoO_3透明电极的有机太阳能电池

以透明导电薄膜Mo O3/Au/Mo O3代替铟锡氧化物(ITO)作为有机太阳能电池(OSCs)的阳极,研究了一系列结构为Mo O3/Au/Mo O3的透明电极和Mo O3(y nm)/Au(x nm)/Mo O3(y nm)/Cu Pc(25 nm)/C60(40nm)/BCP(8 nm)/Al(100 nm)的有机太阳能电池。研究表明,Mo O3/Au/Mo O3电极的光电特性可通过改变各层薄膜厚度加以调控,在Mo O3薄膜厚度为40 nm、Au薄膜厚度为10 nm时性能最优,且以该薄膜为电极的有机太阳能电池器件的性能接近于电极为ITO的有机太阳能电池器件。     

有机薄膜电致发光器件工艺检测的一种简便方法——覆膜加热观测法

提出了一种简便易行、并与有机薄膜电致发光器件制备工艺完全兼容的工艺检测方法－－覆膜加热观测法。这种方法是在器件的制备工艺过程中,同时在铟锡氧化物（ITO）电极的各层有机薄膜上覆盖一层不透气的薄膜（如金属Al膜等）,接着进行快速加热,最后对器件表面进行形貌观测。采用这种方法,观察了器件表面气泡的形成过程,观察了加热温度、ITO表面处理以及有机物纯度对敢泡形成的影响。实验表明,覆膜加热观测法能有效地对工艺进行对比检测,从而达到改进工艺、提高器件质量的目的。     

直流反应磁控溅射制备掺铟ZnO透明导电薄膜的研究

本文介绍了掺铟ZnO透明导电膜的制备工艺.并应用半导体物理理论分析了薄膜的导电机理,用Drude理论建立了物理模型,分析与计算了薄膜从可见到红外光波段的光学性能,结果表明,理论计算与实测值两者符合得较好.     

Self-organization of five species in a cyclic competition game

Cyclic competition game models, particularly the “rock–paper–scissors” model, play important roles in exploring the problem of multi-species coexistence in spatially ecological systems. We propose an extended “rock–paper–scissors” game to model cyclic interactions among five species, and find that two of the five can coexistent when biodiversity disappears, which is different from the “rock–paper–scissors” game. As the number of fingers is five, we named the new model the “fingers” game, where the thumb, forefinger, middle finger, ring finger, and little finger cyclically dominate their subsequent species and are dominated by their former species. We investigate the “fingers” model in two ways: direct simulations and nonlinear partial differential equations. An important finding is that the number of species in a cyclic competition game has an influence on the emergence of biodiversity. To be specific, the “rock–paper–scissors” model is in favor of maintaining biodiversity in comparison with the “fingers” model when the variables (population size, reproduction rate, selection rate, and migration rate) are the same. It is also shown that the mobility and reproduction rate can promote or jeopardize biodiversity.     

Experimental study on downstep in Chinese intonation

Downstep in pitch contour of Chinese Putonghua is examined using subtly designed sentences by controlling tone combinations. The results show both automatic and nonautomatic downstep phenomena exist in Chinese. In non-automatic downstep, low tones compress downwards the pitch range of the following syllables. and the main influence of downstep is on topline. Low tone not only lower the topline behind it, but also raise the high tones before it, the effects are compatible with each other. In automatic downstep, the topline of pitch contour in intonational phrase is presented as a linear downtrend, but it differs among speakers due to the effect of personal stress practice. In comparison with downstep phenomenon in other tone or non-tone languages, the downstep ratio in Chinese is not constant, and the domain of downstep is not limited within the adjacent tones.     

Contrastive analysis on tone between Putonghua and Taiwan Mandarin

The differences of the pitch and duration of Chinese syllables between Putonghua （PTH） and Taiwan Mandarin （TM） were studied. The speech materials to be used are not only isolated syllables, but also sentences. The results reveal that： For the isolated syllables, T1 and T2 in TM are influenced by Minnan dialect, therefore their pitch are lower than those in PTH. T3 is fall-rise in PTH, while it is fall in TM. Moreover, the syllable duration sequence for different tone is T3〉T2〉T1〉T4 in PTH, while it is T1〉T2〉T3〉T4 in TM. For the syllables in sentences, T2 is mid-rise in PTH, while it is mid-level in TM. And the T3 is longer than T4 but shorter than T1 or T2 in PTH, while it is the shortest in TM. Furthermore the effects of prosodic phrase boundary on duration for different tones are almost the same in PTH, but the lengthening part of T1 or T2 is longer than that of T3 or T4 in TM.     

Abelian-Higgs phase of SU(2) QCD and glueball energy

It is shown that SU(2) QCD admits an dual Abelian-Higgs phase, with a Higgs vacuum of a type-Ⅱ superconductor. This is done by using a connection decomposition for the gluon field and the random-direction approximation. Using a bag picture with soft wall, we presented a calculational procedure for the glueball energy based on the recent proof for wall-vortices [Nucl. Phys. B 741(2006)1].     

Signal generation in an isotropic medium in scanning electron acoustic microscope

Based on the research in Ref. [5][Materials Science and Engineering, 1989; A122： 57 63], an improved model of heat source is set up, the different modes of Lamb wave in an isotropic sample generated by a chopped electron beam at frequency f are obtained with integral transform and normal function expansion method, and the output signal of PZT coupled at the back surface of the sample is found out. The generation mechanism of SEAM （Scanning Electron Acoustic Microscopy） signal is discussed. It shows that the SEAM is a near field imaging technique with high spatial resolution and its best lateral spatial resolution is about 2√2α （α is the radius of the focused electron beam）. Some of experimental results of SEAM images are presented in the paper and it shows that the spatial resolution of SEAM is better than 0.5 μm and smaller than the thermal diffusion length of the sample. Therefore the character of near field imaging in SEAM is also proved experimentally.     

High efficiency filtering using two-dimensional photonic crystal coupled cavity structures

Transmission spectra of coupled cavity structures (CCSs) in two-dimensional (2D) photonic crystals (PCs) are investigated using a coupled mode theory, and an optical filter based on CCS is proposed. The performance of the filter is investigated using finite-difference time-domain (FDTD) method, and the results show that within a very short coupling distance of about 3λ, where λ is the wavelength of signal in vacuum, the incident signals with different frequencies are separated into different channels with a contrast ratio of 20 dB. The advantages of this kind of filter are small size and easily tunable operation frequencies.     

Real-time restoration of rotational blurred image using gradient-loading

The key to the restoration of rotational motion blurred image is how to restore the image under a low cost and to correct the irreversibility of the degradation function matrix.Based on the special qualities of degradation function matrix and precise deduction in space-domain, we present a new approach using gradient-loading for restoration of rotational blurred image.By easily adding a gradient operator, the irreversibility of the original matrix is corrected and can be applied for inverse filtering then.Gradientloading is the optimized approach which combines the advantages of both the approaches using constrained least square filtering and traditional diagonal-loading.Compared with the approach using least square filtering, its peak signal-to-noise ratio (PSNR) is improved from 3.18 to 6.46dB, while the computing time is reduced to 1/2-1/3.Experimental results demonstrate the effectiveness, noise-resistibility, robustness, and low complexity of this approach, which make it more suitable for real-time environment.     

All-Optical Logic Device Using Bent Nonlinear Tapered Y-Junction Waveguide Structure

We propose an all-optical logic device made of a bent tapered Y-junction waveguide with a Kerr-type nonlinear interface. It could provide an AND gate, OR gate, and exclusive-OR (XOR) gate. We could obtain different transmission results by adjusting the bending angle. The numerical simulation results show that the device functions as AND, OR, and XOR gates.     

Real-time, continuous-wave terahertz imaging by a pyroelectric camera

Real-time, continuous-wave terahertz (THz) imaging is demonstrated. A 1.89-THz optically-pumped farinfrared laser is used as the illumination source, and a 124 × 124 element room-temperature pyroelectric camera is adopted as the detector. With this setup, THz images through various wrapping materials are shown. The results show that this imaging system has the potential applications in real-time mail and security inspection.