Indium-mediated regioselective synthesis of ketones from arylstannanes under solvent-free ultrasound irradiation

The solvent-free indium-promoted reaction of alkanoyl chlorides with sterically and electronically diverse arylstannanes is a simple and direct method for the regioselective synthesis of primary, secondary and tertiary alkyl aryl ketones in good to excellent isolated yields (42–84%) under mild and neutral conditions. The protocol is also adequate for the synthesis of aryl vinyl ketones. Reaction times are drastically reduced (from 3–32 h to 10–70 min) under ultrasonic irradiation. Evidences for the involvement of a homolytic aromatic ipso-substitution mechanism, in which indium metal acts as radical initiator, are presented. It is possible the transference of two aryl groups from tin, thus improving effective mass yield, working with diarylstannanes as starting substrates.     

Ultrasonic-assisted synthesis of 1,4-disubstituted 1,2,3-triazoles via various terminal acetylenes and azide and their quorum sensing inhibition

An efficient synthesis of 1,4-disubstituted 1,2,3-triazole derivatives was studied. 1,4-Disubstituted 1,2,3-triazoles containing isoxazole and thymidine structures were synthesized in 84–96% yields starting from various terminal isoxazole ether alkynes and β-thymidine azide derivatives via a 1,3-dispolar cycloaddition using copper acetate, sodium ascorbate as the catalyst under ultrasonic assisted condition. All the target compounds were characterized by HRMS, FT-IR, ¹H NMR and ¹³C NMR spectroscopy. Furthermore, the quorum sensing inhibitory activities of synthesized compounds were evaluated with Chromobacterium violaceum (C. Violaceum CV026) based on their inhibition of violacein production, with compound C₁₀-HSL as a positive control. The compounds 8a, 8c and 8f exhibited considerable levels of inhibitory activity against violacein production, and IC₅₀ values were 217 ± 19, 223 ± 20 and 42.8 ± 4.5 μM, respectively, which highlighted the potential of these compounds as lead structures for further research towards the development of novel QS inhibitors.     

Resourceful synthesis of pyrazolo[1,5-a]pyrimidines under ultrasound irradiation

Pyrazolo[1,5-a]pyrimidines were synthesized via the ultrasonic sonochemical method using the cyclocondensation reaction of 4-alkoxy-1,1,1-trifluoro-3-alken-2-ones [CF₃C(O)CH = C(R)(OMe) – where R = Me, Bu, i-Bu, Ph, 4-Me–C₆H₄, 4-F–C₆H₄, 4-Cl–C₆H₄, 4-Br–C₆H₄, naphth-2-yl and biphen-4-yl] – with 3-amino-5-methyl-1H-pyrazole in the presence of EtOH for 5 min. This methodology has several advantages, for example, it is a simple procedure, it has an easy work-up, mild conditions, short reaction times (5 min) and produces satisfactory yields (61–98%).     

Crystal growth and structural properties of the spinel-type Li1 + xMn2 − xO4 (x = 0.10, 0.14)

Single crystals of the lithium-rich lithium manganese oxide spinels Li_1 + xMn_2 − xO₄ with x = 0.10 and 0.14 have been successfully synthesized in high-temperature molten chlorides at 1023 K. The single-crystal X-ray diffraction study confirmed the cubic Fd3¯m space group and the lattice parameters of a = 8.2401(9) Å for x = 0.10 and a = 8.2273(10) Å for x = 0.14 at 300 K, respectively. The crystal structures have been refined to the conventional values R = 3.7% for x = 0.10 and R = 3.1% for x = 0.14, respectively. Low-temperature single-crystal X-ray diffraction experiments revealed that these single crystal samples showed no phase transition between 100 and 300 K. The electron-density distribution images in these compounds by the single-crystal MEM analysis clearly showed strong covalent bonding features between the Mn and O atoms due to the Mn–3d and O–2p interaction.     

Peculiarities of Al magic cluster self-assembly on Si(1 0 0) surface

Using scanning tunneling microscopy observations and density functional theory calculations, regularities of the Al magic cluster array self-assembly on Si(1 0 0) surface has been elucidated. While a single Al cluster occupies an area of 4a × 3a, an ordered Al-cluster array exhibits a 4 × 5 periodicity, as the clusters in the array are separated by the 4a × 2a “spacers”. The plausible structural model for the “spacer” was proposed in which the “spacer” is arranged as an ordinary 4a × 3a-Al cluster in which the central atomic row with the topmost Si atom is missing. Appearance of the “spacers” in the Al-cluster array was found to reduce formation energy of the array. Ability to incorporate the rows of Al-“spacers” into the completed 4 × 3 In-cluster array was demonstrated.     

Use of film thickness and Cu additive to improve (0 0 1) texture in MgO/FePtCu(C) bilayers

A multilayer structure has been proposed that demonstrates improved (0 0 1) texture for FePt-based L1₀ perpendicular media. Achieving a strong perpendicular magnetic anisotropy requires aligning the L1₀ crystallographic c-axis along the film normal. The ordered L1₀ FePt structure is tetragonal with a c/a ratio close to 0.965. This makes discriminating between the three crystallographic variants ([1 0 0], [0 1 0], and the desired [0 0 1]) difficult. Alloying FePt with Cu to reduce the c/a ratio and using a multilayer approach to keep the magnetic layers thin results in a structure with an adjustable M_rt and a strong (0 0 1) texture (rocking curve widths around 2°). This is a remarkable improvement in texture from pure FePt multilayered films or monolithic FePt(X) films. The proposed [MgO(2 nm)/Fe_50−xPt₅₀Cu_x(5 nm)]_×n structure limits grain size in the vertical (perpendicular) direction albeit not in the plane of the film. Carbon can be added to the FePtCu layer to reduce the grain size with minimal degradation of the (0 0 1) orientation.     

The generalized Fresnel–Hadamard complementary transformation for asymmetric beamsplitter

Based on the newly developed parameterized coherent-entangled state representation we propose so-called the generalized Fresnel–Hadamard complementary transformation for asymmetric beamsplitter, which is unitary. The new unitary operator plays the role of both Fresnel transformation for a₁ sin θ ? a₂ cos θ and Hadamard transformation for a₁ cos θ + a₂ sin θ, respectively. Physically, a₁ sin θ ? a₂ cos θ and a₁ cos θ + a₂ sin θ could be a asymmetric beamsplitter’s two output fields. We show that the two transformations are concisely expressed in the parameterized coherent-entangled state representation as a projective operator in integration form.     

Stabilization of ErFeAsO-based superconductor by hydrogen doping under high pressure

Here we report on the successful synthesis of ErFeAsO-based superconductor by hydrogen doping using high-pressure (HP) synthesis technique. The ErFeAsO_1?y target pellets were sandwiched between LaFeAsO_0.8H_0.8 pellets, which act as a hydrogen source. Hydrogen released from the hydrogen source soaks into the target pellets during HP synthesis and the target pellets crystallizes with the tetragonal crystal structure with the lattice constants a = 3.8219 Å and c = 8.2807 Å. The hydrogen doped sample ErFeAsO_1?y(H) thus obtained shows superconducting critical temperatures (T_c) of 44.5 K and 42.5 K determined by onsets of resistive and diamagnetic transitions, respectively.     

Extending the fast multipole method for charges inside a dielectric sphere in an ionic solvent: High-order image approximations for reaction fields

As a sequel to our previous paper on extending the Fast Multipole Method (FMM) for charges inside a dielectric sphere [J. Comput. Phys. 223 (2007) 846–864], this paper further extends the FMM to the electrostatic calculation for charges inside a dielectric sphere immersed in an ionic solvent, a scenery with more relevance in biological applications. The key findings include two fourth-order multiple discrete image approximations in terms of u = λa to the reaction field induced by the ionic solvent, provided that u = λa < 1 where λ is the inverse Debye screening length of the ionic solvent and a is the radius of the dielectric sphere. A 10⁻⁴ relative accuracy in the reaction field of a source charge within the sphere can be achieved with only 3–4 point image charges. Together with the image charges, the FMM can be used to speed up the calculation of electrostatic interactions of charges in a dielectric sphere immersed in an ionic solvent.     

Fourier transform microwave spectroscopy of the reactive intermediate monoiodosilylene,HSiI and DSiI

The pure rotational spectra of three silicon isotopologues of HSiI and two isotopologues of DSiI have been recorded by pulsed-jet Fourier transform microwave (FTMW) spectroscopy. Neon was passed over dry ice cooled H₃SiI or D₃SiI and introduced into the pulsed valve of the FTMW spectrometer. The monoiodosilylenes HSiI and DSiI were produced in situ with a 1000 V DC-discharge nozzle. Only a-type transitions occur in monoiodosilylene from 6 to 26 GHz. We observe K_a = 0 a-type transitions for H²⁸SiI, H²⁹SiI, H³⁰SiI, and D²⁹SiI, and both K_a = 0 and 1 a-type transitions for D²⁸SiI. Rotational constants, centrifugal distortion constants, iodine nuclear quadrupole coupling constants, and nuclear spin–molecular rotation constants were measured.     

Effect of ultrasound processing on anthocyanins and color of red grape juice

Grape juice samples were sonicated with processing variables of amplitude level (24.4–61.0 μm) and treatment time (0–10 min) at a constant frequency of 20 kHz and pulse durations of 5 s on and 5 s off. A full factorial experimental design with regression modeling was employed to investigate the main effects of amplitude level and treatment time on anthocyanins and color parameters. Significant effects of sonication on major anthocyanins cyanidin-3-O-glucosides (CA), malvanidin-3-O-glucosides (MA) and delphinidin-3-O-glucosides (DA), color values (L*, a*, b*) and color index (CI) were observed. Prediction models were found to be significant (p < 0.05) with low standard errors and high coefficients of determination (R²). Model predictions for critical quality parameters of anthocyanins (CA; MA; DA), color values (L*, a*, b*), TCD and CI inactivation were closely correlated to the experimental results obtained. Significant retention of anthocyanin content in grape juice was observed for CA (97.5 %); MA (48.2 %) and DA (80.9%) during sonication. CI and other color combinations (L*a*b*, L*a*/b* and L*b*/a*) were found to be strongly correlated with anthocyanin content. This study shows that sonication could be employed for as a preservation technique for fruit juice processing where anthocyanin retention is desired.     

Synergistic effect of dual-frequency ultrasound irradiation in the one-pot synthesis of 3,5-disubstituted isoxazoles

Herein is reported a one-pot three-step process for the regioselective synthesis of 3,5-disubstituted isoxazoles based on copper(I)-catalyzed cycloaddition reaction between in situ generated nitrile oxides (from the corresponding aldehydes) and alkynes, using ultrasound irradiation, avoiding toxic reagents and solvents and isolation/purification of intermediates.The combined use of 40 kHz ultrasonic bath and 20 kHz probe in the presence of copper turnings reduced reaction time to 1 h and resulted in only one final purification step with increased yields, clearly indicating that there is a dual-frequency synergistic effect.In addition, under metal free conditions, the 1,3-dipolar cycloaddition was regioselective giving low to modest yields.     

Structural reinvestigation of Li3FeN2: Evidence of cationic disorder through XRD,solid-state NMR and Mössbauer spectroscopy

A significant cationic disorder is evidenced on Li₃FeN₂ prepared through solid-state reaction under controlled atmosphere. This derivative anti fluorite type structure (orthorhombic, space group Ibam, a=4.870(1) Å, b=9.652(1) Å and c=4.789(1) Å), solved first through single crystal X-ray diffraction [7], is usually described by Li⁺ and Fe⁺³ ordered distribution in tetrahedral sites formed by the nitrogen network, leading to [FeN_4/2]³⁻ edge-sharing tetrahedral chains. From ⁷Li/⁶Li Nuclear Magnetic Resonance spectroscopy, ⁵⁷Fe Mössbauer spectroscopy and powder X-ray and neutron diffraction, we demonstrate that about 4% of lithium sites are filled by iron and about 11% of iron sites are occupied by Li, which can explain the discrepancy within the Gudat's model observed on larger scale solid-state synthesis samples.     

Growth,structure and physical properties of single crystals of pure and Pb-doped Bi-based high Tc superconductors

Single crystals of (Bi_1−xPb_x)₂Sr₂Ca₂Cu₃O_10+δ (x = 0 and 0.16) (sizes up to 3 × 2 × 0.1 mm³) have been grown by means of a newly developed “vapour-assisted travelling solvent floating zone” technique (VA-TSFZ). Post-annealing under high pressure of O₂ (up to 10 MPa at T = 500 °C) was applied to enhance T_c (up to 111 K) and improve the homogeneity of the crystals (ΔT_c ⩽ 1 K). The structure of both Pb-free and Pb-doped Bi-2223 was refined for the first time from single crystal X-ray diffraction (XRD) data. The unit cell of the average structure is pseudo-tetragonal with a = 5.4210(7), b = 5.4133(6) and c = 37.010(7) Å, and a = 5.395(1), b = 5.413(1) and c = 37.042(11) Å, for the Pb-free and the Pb-doped phase, respectively. An incommensurate modulation in the direction of one of the short cell vectors has been defined (q ∼ 0.21 a¹), however, the structure can be conveniently described in a supercell with a fivefold volume (a = 27.105(4) Å). With respect to the “non-modulated” structure, one additional oxygen atom for ten initial O was found to be inserted into the BiO layers. The superconducting anisotropy of Bi-2223 was found to be ∼50, from measurements of the lower critical field. The anisotropy of Bi-2223 is significantly reduced compared to that of Bi-2212, and this accounts for the enhanced irreversibility fields in Bi-2223. Furthermore, Bi-2223 has a higher critical current density, and a reduced magnetic relaxation rate compared to Bi-2212, which are both signatures of more effective pinning in Bi-2223 due to its reduced anisotropy.     

Thermal annealing of GaSb quantum dots in GaAs formed by droplet epitaxy

We investigate effects of annealing on GaSb quantum dots (QDs) formed by droplet epitaxy. Ga droplets grown on GaAs are exposed to Sb molecular beam and then annealed at T_a=340–450 °C for 1 min to form GaSb QDs. An atomic force microscope study shows that with the increase of T_a, the average diameter of dots increases by about 60%, while their density decreases to about 1/3. The photoluminescence (PL) of GaSb QDs is observed at around 1 eV only for those samples annealed above T_a=380 °C, which indicates that the annealing process plays an important role in forming high quality GaSb QDs.     

A new carbon nitride synthesized by shock compression of organic precursors

A series of shock recovery experiments up to ∼50 GPa were carried out on three nitrogen-rich materials of a C–N–O amorphous precursor, dicyandiamide and melamine. The powder X-ray diffractions (XRD) of recovered samples show that carbon nitride phases are formed. They are β-C₃N₄ and a new crystalline phase. The new phase is indexed as a monoclinic cell with a=0.981 nm, b=0.723 nm, c=0.561 nm, β=95.2° and V_cell=0.3966 nm³. Melamine was very stable and did not decompose up to ∼37 GPa. This new phase is considered to form during the adiabatic release process with an extremely high quenching rate (∼10⁹ K/s) and shock compression may provide a novel synthesis route for various C–N phases from appropriate organic materials.     

Ultrasound irradiation promotes the synthesis of new 1,2,4-triazolo[1,5-a]pyrimidine

Ultrasonic irradiation was used in the synthesis of a series of novel 1,2,4-triazolo[1,5-a]pyrimidines. The products were synthetized from the cyclocondensation reaction of 1,1,1-trifluoro-4-metoxy-3-alken-2-one [CF₃C(O)CHC(R)OMe, where R = Ph, 4-F-C₆H₄, 4-Br-C₆H₄, 4-I-C₆H₄, 4-CH₃-C₆H₄, 4-CH₃O-C₆H₄, Thien-2-yl, Biphen-4-yl] or β-enaminones [RC(O)CHCHNMe₂, where R = Ph, 4-F-C₆H_4, 4-Br-C₆H_4, 4-I-C₆H_4, 4-CH₃-C₆H₄, 4-CH₃O-C₆H₄, 4-NO₂-C₆H₄, Thien-2-yl, Biphen-4-yl, Naphth-2-yl, Pyrrol-2-yl, CCl₃] with 5-amino-1,2,4-triazole in acetic acid at 99 °C with 5–17 min of ultrasound irradiation. This methodology has shown several advantages, such as shorter reaction times, mild conditions, high regioselectivity, and excellent yields, when compared with conventional thermal heating (oil bath).     

Extinguishment of propane/air co-flowing diffusion flames by fine water droplets

In the present study, extinguishment of propane/air co-flowing diffusion flame by fine water droplets was investigated experimentally. Water droplets are generated by piezoelectric atomizers with the maximum droplets flow rate of 1500 ml/h. When the fuel injection velocity U_f is low, an attached laminar diffusion flame with a premixed flame at the base is stabilized. At some distance from the burner rim, a transition from laminar to turbulent diffusion flame occurs, and a turbulent diffusion flame is formed in the downstream region. When the fuel injector rim is thin (δ = 0.5 mm), the flame stability deteriorates with increase of the co-flowing air stream velocity U_a and the water droplets flow rate Q_m. The stability mechanism can be explained by the balance of the gas velocity and the burning velocity of premixed flame formed at the base. However, when the injector rim is thick (δ = 5 mm), a recirculation zone is produced downstream of the injector rim. The dependence of the quenching distance H_q on U_f and Q_m is relatively weak, and the stability diagram shows curious features. It was shown that U_a is crucially important since it determines flow residence time; if U_a < 0.4 m/s, water droplets can evaporate when they go by the recirculation zone, and the water vapor can diffuse into the recirculation zone. However, if U_a > 0.4 m/s, the water droplets should pass by the recirculation zone without sufficiently evaporated and are not so effective to extinguish the flame. The supply velocity of droplet-laden air should be low enough so that water droplets can evaporate and water vapor can diffuse into the premixed region at the base to obtain sufficient effectiveness of water droplets for fire suppression.     

Current-carrying states in superconductor/insulator and superconductor/semiconductor superlattices in the mesoscopic regime

We discuss some of the basic theoretical aspects of current-carrying states in superconducting superlattices with tunnel barriers in the mesoscopic regime, when p₀ ^− 1 ⪡ a ⪡ ξ₀(a is the superconducting layer thickness, p₀is the Fermi momentum, ξ₀is the BCS coherence length and ℏ =  1). We establish the necessary conditions for the observation of the classical Josephson effect (with sinusoidal current–phase dependence) and derive self-consistent analytical expressions for the critical Josephson current. These expressions are proportional to the small factor a / ξ₀and have unusual temperature dependence as compared with the single-junction case. For certain parameter values, the superconducting gap exhibits an exponential decrease due to pair-breaking effect of the supercurrent. The supercurrent can completely destroy the superconductivity of the system above a certain characteristic temperature T ^* . In this paper, we also study the effect of intrabarrier exchange interactions. We show that this effect is strongly enhanced compared with the single-junction case and can manifest itself in an exponential decrease of the critical temperature.     

Bulk and surface properties of ionic salt CsH5(PO4)2

We report a comparative study of transport and thermodynamic properties of single-crystal and polycrystalline samples of the ionic salt CsH₅(PO₄)₂ possessing a peculiar three-dimensional hydrogen-bond network. The observed potential of electrolyte decomposition ≈ 1.3 V indicates that the main charge carriers in this salt are protons. However, in spite of the high proton concentration, the conductivity appears to be rather low with a high apparent activation energy E_a ≈ 2 eV, implying that protons are strongly bound. The transport anisotropy though is not large, correlates with the crystal structure: the highest conductivity is found in the [001] direction (σ_130 °C ∼ 5.6 × 10^− 6 S cm^− 1) while the minimal conductivity is in the [100] direction (σ_130 °C ∼ 10 ⁻⁶ S cm^− 1). The conductivity of polycrystalline samples appears to exceed the bulk one by 1–3 orders of magnitude with a concomitant decrease of the activation energy (E_a ≈ 1.05 eV), which indicates that a pseudo-liquid layer with a high proton mobility is formed at the surface of grains. Infrared and Raman spectroscopy used to study the dynamics of the hydrogen-bond system in single-crystal and polycrystalline samples have confirmed the formation of such a modified surface layer in the latter. However, no bulk phase transition into the superionic disordered phase is observed in CsH₅(PO₄)₂ up to the melting point T_melt ∼ 151.6 °C, in contrast to its closest relative compound CsH₂PO₄.