Preparation of nanosized crystalline TiO2 particles at low temperature for photocatalysis

Nanocrystalline titanium dioxide (TiO₂) particles were prepared by a modified alkoxide method under acidic conditions at temperatures ranging from 60°C to 90°C. The reaction temperature was used to control the crystalline phase of the TiO₂ particles. At 60°C and 75°C rutile was formed whilst at 90°C anatase and brookite were formed.The photocatalytic activity of the prepared particles was tested for the degradation of sucrose. The photocatalytic activities of the prepared nanosized TiO₂ were compared to those obtained from Degussa P-25 TiO₂ as well as TiO₂ crystalline samples prepared using the conventional sol–gel/heat treatment method. At low organic concentrations, Degussa P-25 exhibited higher photocatalytic behaviour than all the prepared particles while, at high organic concentrations, the nanosized TiO₂ particles prepared at low temperature displayed an activity comparable to Degussa P-25 but much higher than the heat treated sample. The formation of excess intermediates during the degradation of higher sucrose loadings is believed to hinder the photoactivity of Degussa P-25, while the prepared TiO₂ particles are able to maintain their activity for the degradation of the intermediates of sucrose.     

Preparation of titania hollow spheres by catalyst-free hydrothermal method and their high thermal stabilities

TiO₂ hollow spheres have been prepared by hydrothermal method using carbon spheres as hard templates based on template-directed deposition and calcination in order to remove templates. The morphology and structure of samples were systematically characterized by using various techniques, including XRD, zeta analyzer, SEM, TEM, DRS and FTIR. In this approach, the anatase phase was retained for temperatures up to 900 °C. Moreover, negative charged titania is deposited onto the negative charged surface of carbon spheres, which is proved by nanoparticle size analyzer. Therefore, a possible formation mechanism of TiO₂ hollow spheres was proposed. TiO₂ hollow spheres calcined at 550 °C exhibited the superior photocatalytic activity for the degradation of Rhodamine B, 2.9 times greater than that of Degussa P25. Furthermore, thermal stability of TiO₂ hollow spheres was examined. Fortunately, we found that hollow structures could still be visible distinctly after calcining at 900 °C.     

Fabrication of Gold-Doped Titanium Dioxide (Tio2:Au) Nanofibers Photocatalyst by Vacuum Ion Sputter Coating

Gold-doped titanium dioxide (TiO₂:Au) nanofibers were prepared by a combination of an electrospinning method and sputtering technology and characterized by scanning electron microscopy and X-ray photoelectron spectroscopy. The results show that the morphologies of Au-deposited TiO₂ nanofibers can be well controlled by the sputtering time. The photocatalytic decomposition of acetaldehyde on TiO₂:Au nanofibers was investigated at room temperature. The photocatalytic effect of the TiO₂ nanofiber was improved by using the Au-doped titania nanofibers catalyst and increased as the Au depositing time was increased from 40 s to 3 min. The photocatalytic removal rate of acetaldehyde remained above 94% on the TiO₂:Au nanofibers (2 min) catalyst under ultraviolet (UV) irradiation for 70 min, 1.7 times that of pure TiO₂ fibers.     

XPS characterization of sensitized n-TiO2 thin films for dye-sensitized solar cell applications

TiO₂ thin films, employed in dye-sensitized solar cells, were prepared by the sol-gel method or directly by Degussa P25 oxide and their surfaces were characterized by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM). The effect of adsorption of the cis-[Ru(dcbH₂)₂(NCS)₂] dye, N3, on the surface of films was investigated. From XPS spectra taken before and after argon-ion sputtering procedure, the surface composition of inner and outer layers of sensitized films was obtained and a preferential etching of Ru peak in relation to the Ti and N ones was identified. The photoelectrochemical parameters were also evaluated and rationalized in terms of the morphological characteristics of the films.     

Photocatalytic performance of silver TiO2: Role of electronic energy levels

Nano-sized silver deposits on the surface of Degussa P25 TiO₂ (Ag-DP25) particles act as sites of electron accumulation where the reduction of adsorbed species takes place. Electrons can be transferred from Degussa P25 TiO₂ (DP25) to Ag particles because of the difference in the work functions of the two materials. The efficiency of the electron transfer depends on the size and the distribution of metal deposits. A significant photocatalytic oxidation enhancement by metal deposit will only be observed if the metal deposits play a more dominant role than just increasing the life time of charge carriers. The properties of metal deposits like, loaded amount, oxidation state of the deposit and its size will influence the performance. Further, a decrease in band-gap in DP25 and Ag-DP25 was observed due to the carbide ion substitution for the oxide ion in TiO₂. Such unintentional carbon incorporation is expected mostly in combustion synthesized materials. Silver metal deposits and unintentional incorporation of the carbon shows the beneficial effect by specific mechanism in the photocatalytic degradation of Congo Red (CR).     

Understanding the solar photo-catalytic activity of TiO2-ITO nanocomposite deposited on low cost substrates

In this work, we report on the photo-catalytic properties of TiO₂-ITO nanocomposite deposited on low cost conventional clay ceramic substrates. The nanocomposite was formed by spraying a solution prepared from the P25 TiO₂ powder (Degussa) mixed with an organometallic paste of a dissolved combination of indium and tin. A TiO₂-ITO powder-like nanocomposite was prepared for X-ray diffraction (XRD) and transmission electron microscopy (TEM) characterization. The mean particle size of the TiO₂-ITO nanocomposite was found to be larger than that of pure TiO₂. The optical features of TiO₂-ITO-based layers (deposited on glass substrates) were investigated using UV-vis spectroscopy. The TiO₂-ITO nanocomposite deposited layers were found to have higher light absorption than the P25 TiO₂ powder. The photo-catalytic properties of the TiO₂-ITO nanocomposite (deposited on low cost clay ceramic substrates) were tested under solar irradiation using a well-known polluting dye. It was shown that the TiO₂-ITO nanocomposite exhibits higher degradation rates towards the pollutant dye than the P25 TiO₂ powder. The optical band gap of the TiO₂-ITO nanocomposite (2.79 eV) was found to be lower than that of pure TiO₂ (3.1 eV), while ITO (indium tin oxide) has a band gap of about 4.2 eV. ITO was found to be entirely transparent to sun light, while it exhibits a slight photo-catalytic activity, signifying the possible existence of an indirect photo-catalysis phenomenon (sensitized semiconductor photocalysis) and potential degradation (oxidation) of the pollutant through electron transfer from the dye to conduction band of the semiconductor. All photo-catalytic activity results were discussed in light of the optical band gap of the various compounds.     

在太阳光照射和不外加酸下TiO2双功能催化剂光催化还原Cr(VI)离子

利用硫酸氧钛铵的热分解控制制备了氮和硫共同掺杂的TiO₂双功能光催化剂. TiO₂双功能光催化剂同时具备光催化性能和较强的Br?nsted酸性,因此能够在太阳光照射和不外加酸下有效光催化还原Cr(VI)离子. 其光催化还原Cr(VI)离子的活性要优于通过外加硫酸调节到等同pH值和太阳光照射下P25光催化剂光催化还原Cr(VI)离子的活性.     

A novel approach towards high-performance composite photocatalyst of TiO2 deposited on activated carbon

TiO₂ photocatalysts deposited on activated carbon (TiO₂/AC) were prepared by dip-hydrothermal method at 180 °C using peroxotitanate as a precursor, then calcinated at 300-800 °C. The samples were characterized by X-ray diffraction, scanning electron microscopy, Raman spectroscopy and the nitrogen absorption. Their photocatalytic activity was evaluated by degradation of methyl orange (MO). The results showed that TiO₂ particles of anatase type were well deposited on the activated carbon surface. TiO₂/AC calcinated at 600 °C exhibited the best photocatalytic performance. For the comparison, the same photocatalysis experiment was carried out for two mixtures of commercial TiO₂ (Degussa P25) with AC and synthetic TiO₂ with AC. It was found that the composite catalyst TiO₂/AC was better than the two mixtures. Besides, different from fine powdered TiO₂, the granular TiO₂/AC photocatalysts could be easily separated from the bulk solution and reused; indeed, its photocatalytic ability was hardly decreased after a five-cycle for MO degradation. The kinetics of the MO degradation fitted well the Langmuir-Hinshelwood model.     

The photocatalytic application and regeneration of anatase thin films with embedded commercial TiO2 particles deposited on glass microrods

Anatase thin films (<200 nm in thickness) embedding Degussa P25 TiO₂ were prepared by sol-gel method. TiO₂-anatase thin films were deposited on a fiberglass substrate and then ground to obtain glass microrods containing the composite films. The film structure was characterized using Raman spectroscopy, atomic absorption and UV-vis spectrophotometry, and atomic force microscopy. The photocatalytic activity of the composite films, calcined at 450 °C, and the regeneration of the activity under the same experimental conditions, were assessed using gas chromatography to study the photodegradation of phenol, an industrial pollutant, in water under 365 nm irradiation. The film with 15.0 wt.% of P25 TiO₂ was found to be more photoactive (54 ppm of degraded phenol at 6 h of illumination) than the other ones.     

Synthesis of fluorinated TiO2 hollow microspheres and their photocatalytic activity under visible light

Fluorinated TiO₂ hollow microspheres with three-dimensional hierarchical architecture were prepared by solvothermally treatment using solid microspheres as precursor. The obtained solid and hollow TiO₂ microspheres were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET), X-ray photoelectron spectroscopy (XPS), UV-Vis diffuse reflectance spectrum (DRS) and photoluminescence (PL) spectra. The photocatalytic activity of as-prepared solid and hollow TiO₂ microspheres was determined by degradation of methyl orange (MO) under visible light irradiation. The results showed that the surface fluorination, the existence of accessible mesopores channels, and the increased light harvesting abilities could remarkably improve the photocatalytic activity of TiO₂ hollow microspheres.     

The potential use of nanosilver-decorated titanium dioxide nanofibers for toxin decomposition with antimicrobial and self-cleaning properties

While chemical and biological attacks pose risk to human health, clean air is of scientific, environmental and physiological concerns. In the present contribution, the potential use of nanosilver-decorated titanium dioxide (TiO₂) nanofibers for toxin decomposition with antimicrobial activity and self-cleaning properties was investigated. Titanium dioxide nanofibers were prepared through sol-gel reaction followed by an electrospinning process. Following the Japan Industrial Standard (JIS) protocol, decompositions of nitrogen oxide (NOx) and volatile organic compound (VOC) by the TiO₂ nanofibers suggested that these materials were capable of air treatment. To further enhance their anti-microbial activity, silver nanoparticles were decorated onto the TiO₂ nanofibers’ surfaces via photoreduction of silver ion in the presence of the nanofibers suspension. Furthermore, tests of photocatalytic activity of the samples were performed by photodegrading methylene blue in water. The nanofibrous membranes prepared from these nanofibers showed superhydrophilicity under UV. Finally, the possibility of using these hybrid nanofibers in environmental and hygienic nanofiltration was proposed, where the self-cleaning characteristics was expected to be valuable in maintenance processes.     

Titanium dioxide nanoparticles prepared by laser pyrolysis: Synthesis and photocatalytic properties

TiO₂ nanoparticles were synthesized via the laser pyrolysis of titanium tetrachloride-based gas-phase mixtures. In the obtained nanopowders, a mixture of anatase and rutile phases with mean particle size of about 14 nm was identified. Using the thermal heated laser nanopowders, mechanically stable films were produced by immobilizing titania nanopowders on glass substrates (the doctor blading method followed by compression). The photocatalytic activity of the prepared films was tested by the degradation of 4-chlorophenol in an aqueous solution under UV-illumination. By referring to known commercial samples (Degussa P25) similarly prepared, higher photocatalytic efficiency was found for the laser-prepared samples.     

Photodegradation of CH3I on mesoporous TiO2-B nanofibers with Au nanoparticles

Au nanoparticles deposited on mesoporous TiO₂-B nanofibers have been prepared, characterized, and used to catalyze photoreactions of iodomethane. High-density gold-particle deposition on TiO₂-B is obtained by electrostatic and/or chemical force between the particles of TiO₂-B and Au capped with -SC(H)(CO₂H)(CH₂CO₂H) through pH control. The capping groups on the gold particles can be removed after 400 °C calcination. It is found that the nature of the inorganic acids used for pH adjustment has effects on particle morphology and deposition. Two other methods, i.e., preparation of TiO₂-B nanofibers in the presence of gold particles and preparation of gold nanoparticles in the presence of TiO₂-B particles (deposition-precipitation method), are also investigated. However, the former method produces a low-density deposition and the latter one induces a morphology change of the TiO₂-B and an increase of the Au in size. Fourier transform infrared spectroscopy has been employed to study and to compare the photoreactions of CH₃I on TiO₂-B and Au/TiO₂-B and the effect of O₂. The presence of gold particles on TiO₂-B increases the efficiency of CH₃I photodegradation, forming adsorbed methoxy and formate. The role of gold is also discussed.     

铈和磷钨酸共掺杂纳米二氧化钛中空纤维的制备及其光催化活性

以棉花纤维为模板,以钛酸四正丁酯、硝酸铈铵和磷钨酸为原料采用模板法制备了一系列铈和磷钨酸共掺杂的、具有中空纤维结构的TiO₂光催化材料, 利用扫描电子显微镜、X射线衍射、BET和紫外-可见光谱等技术对其形貌、晶体结构及表面结构、光吸收特性等进行了表征. 以苯酚溶液的光催化降解为模型反应,考察了不同掺杂量的样品在紫外和可见光下的光催化性能. 结果表明,用模板法制备的TiO₂纤维材料具有中空结构,共掺杂的TiO₂纤维在紫外和可见光条件下较纯TiO₂纤维和单掺杂TiO₂纤维对苯酚溶液具有更好的光催化降解效果, 且铈和磷钨酸的掺杂量显著影响该纤维材料的催化性能;当铈掺杂量为0.3mol%和磷钨酸掺杂量为2mol%,在500 oC焙烧2 h所得中空纤维材料的催化性能最佳,4 h即可使苯酚溶液的降解率达98.5%;重复使用4次仍可使苯酚溶液的降解率保持在87%以上,且该催化剂材料易于离心分离去除.     

Preparation of NaYF4:,Er3+/TiO2 composite and up-conversion luminescence properties under visible light excitation

The up-conversion luminescence composite NaYF 4:Er 3+ /TiO 2 is prepared using the sol-gel method.The specimen has good crystallinity and two shapes,i.e.,viereck and round,while the sizes of viereck and round particles are both micron-sized.The TiO 2 has an anatase structure,while the NaYF 4 has a hexagonal phase,which can be hardly obtained through the common sol-gel method.Due to the big particle size and the high crystallinity of pure NaYF 4:Er 3+,the composite has a small specific surface area that is less than Degussa P25 TiO 2.The NaYF 4:Er 3+ /TiO 2 composite shows several emission peaks at 211,237,and 251 nm under the excitation of 388 nm,at 395 nm and 411 nm under the excitation of 500 nm,and at 467,481,492,and 508 nm under the excitation of 570 nm.     

Preparation and photocatalytic activity of nitrogen-doped TiO2 hollow nanospheres

TiO₂ hollow nanospheres were prepared using silicon oxide as a template. N-doped titanium oxide hollow spheres, TiO_2−xN_x were synthesized by reacting TiO₂ hollow spheres with thiourea at 500 °C. XRD and XPS data showed that oxygen was successfully substituted by nitrogen through the nitrogen-doping reaction, and finally N-doped TiO₂ hollow spheres were formed. The N-doped TiO₂ hollow spheres showed new absorption shoulder in visible light region so that they were expected to exhibit photocatalytic activity in the visible light. The photocatalytic activity of N-doped TiO₂ hollow spheres under visible light was similar to that of normal spherical TiO_2−xN_x in spite of the structural difference.     

Effects of microwave drying on the microstructure and photocatalytic activity of bimodal mesoporous TiO2 powders

Bimodal nanocrystalline mesoporous TiO₂ powders with highly photocatalytic activity were prepared by a hydrothermal method using tetrabutylorthotitanate as precursor, and then dried in microwave oven. The prepared samples were characterized by XRD, SEM, TEM, HRTEM and N₂ adsorption-desorption measurement. The photocatalytic activity was evaluated by the photocatalytic degradation of acetone in air under UV light irradiation at room temperature. The effects of microwave drying on the microstructures and photocatalytic activity of the TiO₂ powders were investigated and discussed. The results show that microwave drying not only promotes the growth of the pores but also greatly reduces the state of agglomeration within the powders. All the microwave-dried TiO₂ powders show higher photocatalytic activity than Degussa P-25 (P25) and the TiO₂ powders dried by conventional method.     

Sunlight photocatalytic activity of CdS modified TiO2 loaded on activated carbon fibers

To improve the photocatalytic application performances of TiO₂, in this work, firstly CdS modified Degussa P25 TiO₂ (CdS/TiO₂) composites were prepared by two methods, sol-gel method and precipitation method. Next they, sol-gel-CdS/TiO₂ (sg-CdS/TiO₂) and precipitation-CdS/TiO₂ (pp-CdS/TiO₂), were loaded on activated carbon fibers (ACFs) by dip-coating method using the sodium carboxymethyl cellulose as adhesives. The composites were characterized by XRD, UV-vis absorbance spectra, SEM, EDS and BET. The photocatalytic activities under sunlight were investigated by the degradation of methylene blue. The results showed that CdS/TiO₂ composites were mainly composed of anatase-TiO₂ and little CdS cubic phases. The absorption wavelengths of sg-CdS/TiO₂ and pp-CdS/TiO₂ composites were extended to 590 nm and 740 nm, respectively. The absorption edge had a pronounced ‘red shift’. From EDS analysis, the elemental contents of CdS/TiO₂ were mainly Ti and O and a small quantity of S and Cd. CdS/TiO₂ loaded on ACFs were in the form of small clusters, but not very uniform; compared with the original ACFs, the surface area and pore volume of CdS/TiO₂/ACFs decreased slightly, respectively, while the average pore diameter was not changed. The photodegradation rate of methylene blue under sunlight with CdS/TiO₂/ACFs composites was markedly higher than that of P25-TiO₂/ACFs, and the effect of pp-CdS/TiO₂/ACFs composites was better than that of sg-CdS/TiO₂/ACFs, when irradiated for 180 min, and the photodegradation rate of methylene blue reached to 90.1%. The photodegradation kinetics of the methylene blue fitted with the Langmuir-Hinshelwood equation. The apparent reaction rate constants of sg-CdS/TiO₂/ACFs and pp-CdS/TiO₂ were 0.0105 min⁻¹ and 0.0146 min⁻¹, respectively, which were about 1.3-1.7 times as large as that of P25-TiO₂/ACFs.     

Enhancement of photocatalytic degradation of polyethylene plastic with CuPc modified TiO2 photocatalyst under solar light irradiation

Solid-phase photocatalytic degradation of polyethylene (PE) plastic, one of the most common commercial plastic, over copper phthalocyanine (CuPc) modified TiO₂ (TiO₂/CuPc) photocatalyst was investigated in the ambient air under solar light irradiation. Higher PE weight loss rate, greater texture change; more amount of generated CO₂, which is the main product of the photocatalytic degradation of the composite PEC plastic can be achieved in the system of PE-(TiO₂/CuPc) in comparison with PE-TiO₂ system. The CuPc promoted charge separation of TiO₂ and enhanced the photocatalytic degradation of PE based on the analysis of surface photovoltage spectroscopy (SPS). During the photodegradation of PE plastic, the reactive oxygen species generated on TiO₂ or TiO₂/CuPc particle surfaces play important roles. The present study demonstrates that the combination of polymer plastic with TiO₂/CuPc composite photocatalyst in the form of thin film is a practical and useful way to photodegrade plastic contaminants under solar light irradiation.     

Role of Cl ions in photooxidation of propylene on TiO2 surface

The effect of Cl⁻ ions on photooxidation of propylene on TiO₂ semiconductor was investigated. Cl⁻/TiO₂ catalysts were prepared by annealing Degussa P25 TiO₂ in the gas flow of N₂ and Cl₂ under 100-400 °C. The photocatalytic oxidation of propylene was carried out in a continuous flow system, with the chromatograph to analyze the products on line. The experimental results showed that the activity of Cl⁻/TiO₂ catalysts increased as heat-treated temperature decreased. The activity of the sample heat-treated at 100 °C was about two times higher than that of pure TiO₂. Moreover, as to TiO₂, the main product of the propylene photocatalytic oxidation was CO₂, but with Cl⁻/TiO₂ catalysts, not only CO₂ but also trace CO was determined. The adsorbed species on TiO₂ surface before and after reaction were analyzed by X-ray photoelectron spectroscopy (XPS) and thermogravimetric/differential thermal analyses (TG-DTA) coupled to a mass spectrometer (MS). XPS analysis showed that there was Cl⁻ absorbed on the Cl⁻/TiO₂ surface, and the absorption amount of Cl⁻ decreased after the photooxidation reaction of propylene. TG-DTA-MS analysis confirmed chlorine absorbed on the surface of TiO₂ in the form of Cl⁻ ion. These results illuminated that absorbed Cl⁻ on the surface of TiO₂ formed a weak physical absorption on TiO₂ at low temperature, and subsequently participated in the photooxidation of propylene, finally removed from TiO₂ surface.