Luminescence of Pr-doped LiCaAlF6 and LiSrAlF6 crystals

The spectral and kinetic parameters of LiCaAlF₆:Pr and LiSrAlF₆:Pr single crystals are studied at LHeT and room temperature (RT). Photon cascade emission (PCE), i.e., ¹S₀→¹I₆ and ³P₀→³H_j, ³F_j transitions after Pr³⁺ excitation via 4f²→4f 5d absorption results in the conversion of the vacuum ultraviolet photon to two visible photons. The excitation and photoemission spectra as well as decay times have been measured and compared with those for CaF₂:Pr and SrF₂:Pr crystals. X-ray luminescence was measured to study the emission origin from both ¹S₀ and ³P₀ states of Pr³⁺. An intense phosphorescence of LiSrAlF₆:Pr was observed in the visible range after X-irradiation at RT, contrary to LiCaAlF₆:Pr.     

Synthesis and luminescent properties of a new red-emitting phosphor for solid-state lighting: Eu0.1GdxLa1.9−xTeO6 (0.02?x?0.1)

The photoluminescence (PL) emission and excitation behavior of red-emitting Eu_0.1Gd_xLa_1.9−xTeO₆ (0.02?x?0.1) powder phosphors is reported. Three dominant bands centered at 395, 466 and 534 nm characterized the excitation spectrum. Under the excitation of 395 nm UV light, the emission spectrum exhibits an intense peak centered at 616 nm corresponding to the ⁵D₀→⁷F₂ transition of Eu³⁺. Because the f→f transitions are located in the wavelength range of blue or near-UV range, optimized phosphor, Eu_0.10Gd_0.08La_1.82TeO₆, is a promising material for solid-state lighting based on GaN LEDs applications.     

Synthesis and luminescence investigation of RE (Eu, Tb and Ce)-doped lithium silicate (Li2SiO3)

Synthesis and photoluminescence (PL) investigations of lithium metasilicate doped with Eu³⁺, Tb³⁺ and Ce³⁺ were carried out. PL spectra of Eu-doped sample showed peaks corresponding to the ⁵D₀→⁷F_j (j=1, 2, 3 and 4) transitions under ultraviolet excitation. Strong red emission coming from the hypersensitive ⁵D₀→⁷F₂ transition of Eu³⁺ ion suggested the presence of the dopant ion in structurally disordered environment. Tb³⁺-doped silicate sample showed blue-green emission corresponding to the ⁵D₄→⁷F_j (j=6, 5 and 4) transitions. Ce-doped sample under excitation from UV, showed a broad emission band in the region 350-370 nm with shoulders around 410 nm. The fluorescence lifetimes of Eu³⁺ and Tb³⁺ ions were found out to be 790 and 600 μs, respectively. For Ce³⁺, the lifetime was of the order of 45 ns. PL spectra of the europium- and terbium-doped samples were compared with commercial red (Y₂O₃:Eu³⁺) and green (LaPO₄:Tb³⁺) phosphors, respectively. It was found that the emission from the doped silicate sample was 37% of the commercial phosphor in case of the Tb-doped sample and 8% of the commercial phosphor in case of the Eu-doped sample.     

Solvothermal synthesis and luminescence properties of Tb-doped gadolinium aluminum garnet

Different concentrations of Tb³⁺ ion-doped gadolinium aluminum garnet (GAG) nanophosphors have been synthesized by solvothermal reaction method and sintered at 1300 °C. The XRD patterns confirm that the GAG phosphors sintered at 1300 °C have a garnet structure with single cubic phase. The calculated crystallite size is about 92 nm. The SEM images of the phosphors show the spherical morphology agglomerated with many small particles. The luminescence properties of these phosphors have been carried out by the emission and excitation spectra along with lifetime measurements. The excitation spectra of GAG:Tb³⁺ phosphors consist of three broad bands due to the 4f⁸→4f⁷5d¹ transition and some sharp peaks due to the 4f⁸→4f⁸ transition. The emission spectra of the phosphors reveal two colors, such as blue due to ⁵D₃→⁷F_J transitions and green due to the ⁵D₄→⁷F_J transitions. The dynamics of the phosphors have been investigated by decay curves and the cross-relaxation process and is observed at 0.5 mol% Tb³⁺ concentration.     

Photoluminescence in MgxSr1−xAl2O4:Eu, Ndand electron-vibrational interaction in the Eu 5d states

Green phosphor compositions Mg_xSr_1−xAl₂O₄:Eu, Nd (with x=0.05-0.25) were prepared by solid state reaction method. The effect of Mg substitution on photoluminescence characteristics was investigated. The photoluminescence show intense green emission for MgSrAl₂O₄:Eu²⁺, Nd³⁺ with long persistence. This green emission corresponds to transitions from 4f⁶5d¹ to 4f⁷ of Eu²⁺ ion. Comparative analysis of the excitation and emission spectra were used to evaluate the crystal field splitting of the 5d states of Eu²⁺ and the parameters of electron-vibrational interaction, such as Huang-Rhys factor, effective phonon energy, and zero-phonon line position.     

Unusual luminescence of octahedrally coordinated divalent europium ion in Cs2MP2O7 (M=Ca, Sr)

The excitation and emission spectra of octahedrally coordinated europium ion (Eu²⁺) ions in Cs₂M²⁺P₂O₇ (M²⁺=Ca, Sr) are reported and discussed. The remarkable features of the Eu²⁺ luminescence in these phosphate materials include (a) very large Stokes shift of emission (∼1 eV), (b) high luminescence quenching temperature, and (c) unusually low energy of the emitted photons for Eu²⁺ luminescence in phosphate-based materials. The broad emission bands of Eu²⁺ in Cs₂CaP₂O₇ and Cs₂SrP₂O₇ peak at 607 and 563 nm, respectively. The Stokes shift, crystal field splitting, centroid shift and the red shift of the Eu²⁺ 4f⁶5d¹ electronic configuration have been estimated from the relevant optical data. The radiative lifetime of the Eu²⁺ emission in Cs₂M²⁺P₂O₇ is ∼1.2 μs. The nature of the Eu²⁺ emission in Cs₂M²⁺P₂O₇ is discussed and arguments are presented to associate the luminescence with an extreme case of normal 4f⁶5d¹→4f⁷[⁸S_7/2] emission.     

Enhanced blue emission and EPR study of LaMgAl11O19:Eu phosphors

Europium doped LaMgAl₁₁O₁₉ phosphor was prepared by the combustion method. The as-prepared and post-treated (1350 °C 10 h 5% H₂+95% N₂) phosphors were investigated by X-ray diffraction (XRD), Fourier transform infrared (FT-IR), scanning electron microscopy (SEM), photoluminescence (PL) and electron paramagnetic resonance (EPR) techniques. XRD patterns show that LaMgAl₁₁O₁₉:Eu phosphors have hexagonal structure. FT-IR spectrum exhibits absorption bands corresponding to the stretching vibration of AlO₄ and AlO₆. Morphological studies reveal that this phosphor has faceted plates of varying sizes and shapes. The as-prepared LaMgAl₁₁O₁₉:Eu phosphor consists of both Eu³⁺ and Eu²⁺ ions. The phosphor exhibits a bright blue emission at 450 nm (4f⁶5d→4f⁷ transition of Eu²⁺). On post-treating the phosphor we are able to enhance the blue emission efficiency by 330%. The process was detected from the evolution of excitation, emission and EPR spectra and the results are discussed.     

Luminescent characterization of CaAl2S4:Eu powder

The photoluminescent (PL) emission and excitation behaviour of green-emitting CaAl₂S₄:Eu²⁺ powder phosphor is reported in detail. CaAl₂S₄:Eu²⁺ emission provides good CIE colour coordinates (x=0.141; y=0.721) for the green component in display applications. Powder with a dopant concentration of 8.5 mol% shows the highest luminescence efficiency. Temperature dependence of the radiative properties, such as luminescence intensity and decay time, was investigated. In particular, the Stokes shift, the mean phonon energy, the redshift, the energy of the f→d and d→f transition and the crystal field splitting of the CaAl₂S₄:Eu²⁺ emission were determined. The thermal quenching of the emission was examined.     

VUV spectroscopic properties of Ce and Pr-doped AREP2O7-type alkali rare earth diphosphates (A=Na, K, Rb, Cs; RE=Y, Lu)

Spectroscopic properties of Ce³⁺ and Pr³⁺-doped AREP₂O₇-type alkali rare earth diphosphates (A=Na, K, Rb, Cs; RE=Y, Lu) have been investigated using VUV spectroscopy technique. Ce³⁺-doped samples show typical Ce³⁺ emission in the range of 325-450 nm. The strong host absorption band starting at around 160 nm indicates that the optical band gap of AREP₂O₇ hosts is at least 7.7 eV, and the host→Ce³⁺ energy transfer process is rather efficient. However, AREP₂O₇:Pr³⁺ samples show less efficient host→Pr³⁺ energy transfer. The direct Pr³⁺ 4f²→4f¹5d¹ excitation, which are 12160±640 cm⁻¹ higher respect to that of Ce³⁺, leads to strong 4f¹5d¹→4f² emission bands in the range of 230-325 nm but no obvious 4f²→4f² emission lines.     

Die Isotopieverschiebung von151Eu,152Eu,153Eu,154Eu und die Kernmomente der radioaktiven Isotope152Eu und154Eu

The isotope shift of the stable¹⁵¹Eu,¹⁵³Eu, and the radioactive¹⁵²Eu,¹⁵⁴Eu isotopes and the hyperfine splitting of the¹⁵²Eu isotope was investigated using a digital recording Fabry-Perot-spectrometer. From isotope shift measurements on the line λ 5 765 Å (4f ⁷ 6s 6p z⁶P_7/2-4f ⁷ 6s² a⁸S_7/2) the relative isotope shift was derived:¹⁵¹Eu:0;¹⁵²Eu: 0.923(8);¹⁵³Eu: 1;¹⁵⁴Eu: 1.197(8). The results show that there is a strong increase in the change of the mean square nuclear charge radius δ〈r²〉 when only one neutron is added to the 88 neutrons of the¹⁵¹Eu nucleus, whereas the change of δ〈r²〉 between¹⁵²Eu and¹⁵³Eu is of the same order of magnitude as that between¹⁵³Eu and¹⁵⁴Eu. From the hyperfine splitting of the radioactive isotope¹⁵²Eu in the line δ 6865 Å (4f ⁷ 6s 6p z ¹⁰ P _9/2-4f ⁷ 6s² a⁸S_7/2) the sign of the magnetic dipole moment μ_I(¹⁵²Eu) was found to be negative, and with this result and earlier experimental data the signs of the nuclear quadrupole momentsQ(¹⁵²Eu) andQ (¹⁵⁴Eu) could be determined to be positive.     

Spectral analysis of Pr-, Sm- and Dy-doped transparent GeO2-BaO-TiO2 glass ceramics

In this paper, we present the photoluminescence properties of Pr³⁺-, Sm³⁺- and Dy³⁺-doped germanate glasses and glass ceramics. From the X-ray diffraction measurement, the host glass structure was determined. These glasses have shown strong absorption bands in the near-infrared (NIR) region. Compared to Pr³⁺-, Sm³⁺- and Dy³⁺-doped glasses, their respective glass ceramics have shown stronger emissions due to the Ba₂TiGe₂O₈ crystalline phase. For Pr³⁺-doped glass and glass ceramic, emission bands centered at 530 nm (³P₀→³H₅), 614 nm (³P₀→³H₆), 647 nm (³P₀→³F₂) and 686 nm (³P₀→³F₃) have been observed with 485 nm (³H₄→³P₀) excitation wavelength. Of them, 647 nm (³P₀→³F₂) has shown bright red emission. Emission bands of ⁴G_5/2→⁶H_5/2 (565 nm), ⁴G_5/2→⁶H_7/2 (602 nm) and ⁴G_5/2→⁶H_9/2 (648 nm) for the Sm³⁺:glass and glass ceramic, with excitation at ⁶H_5/2→⁴F_7/2 (405 nm) have been recorded. Of them, ⁴G_5/2→⁶H_7/2 (602 nm) has shown a bright orange emission. With regard to the Dy³⁺:glass and glass ceramic, a bright fluorescent yellow emission at 577 nm (⁴F_9/2→⁶H_13/2) has been observed, apart from ⁴F_9/2→⁶H_11/2 (667 nm) emission transition with an excitation at 454 nm (⁶H_15/2→⁴I_15/2) wavelength. The stimulated emission cross-sections of all the emission bands of Pr³⁺, Sm³⁺ and Dy³⁺:glasses and glass ceramics have been computed based on their measured full-width at half-maxima (FWHM, Δλ) and lifetimes (τ_m).     

Influence of high hydrostatic pressure on Eu-luminescence in KMgF3:Eu crystal

Spectroscopic investigations are presented of KMgF₃:Eu²⁺ crystal under high hydrostatic pressure from ambient to 310 kbar. The sample was excited by 30 ps pulses generated by optical parametric generator (OPG) system with wavelength controlled between 210 and 325 nm. The Grüneisen parameters of individual phonons are obtained from the pressure shift of the Eu²⁺ emission related to the ⁶P_7/2→⁸S_7/2 transition accompanied by phonon sideband. The luminescence decays exponentially for the pressure below 135 kbar with lifetime of 3.30 ms and slightly nonexponential above 135 kbar, while the average decay time is nearly independent of the pressure. The results obtained for KMgF₃:Eu²⁺ are compared with those for LiBaF₃:Eu²⁺ in which the ⁶P_7/2→⁸S_7/2 emission is replaced by the broadband emission of the 4f⁶5d¹→4f⁷ transition at high hydrostatic pressure.     

Luminescent properties of trivalent praseodymium-doped lanthanum aluminum germanate LaAlGe2O7

The luminescent characteristics of Pr³⁺-activated LaAlGe₂O₇ were investigated. In response to excitement using 448 nm blue light, the emission spectra involved most of the ³P₀→³H_J transitions. The dominant emission came from the ³P₀→³H₄ transition at 487 nm. ¹D₂ fluorescence quenching was observed in highly doped samples and is related to the cross-relaxation processes among neighboring Pr³⁺ ions. In contrast with conventional Pr³⁺-activated phosphors, the extraordinary excitation spectra showed only intense f-f transition of Pr³⁺ ions, while the 4f-5d transition was eliminated. This is ascribed to photoionization. By analyzing absorption and excitation spectra, it is recognized that no efficient energy transfer occurs between Pr³⁺ and the host lattice in LaAlGe₂O₇.     

Emission analysis of Eu:MgLaLiSi2O7 powder phosphor

Newly synthesized reference MgLaLiSi₂O₇ and red luminescent Eu³⁺:MgLaLiSi₂O₇ powder phosphors have been successfully developed by a solid-state reaction method to analyze their emission and structural properties from the measurement of their XRD, SEM, FTIR and PL spectra. Emission spectra of Eu³⁺ powder phosphors have shown strong red emissions at 613 nm (⁵D₀→⁷F₂). These phosphors have also shown bright red emissions under a UV source. Based on the red emission performance, the Eu³⁺ concentration has been optimized to be at 0.3 mol%.     

Photoluminescence characteristics of energy transfer between Er and Bi in Gd2O3: Er, Bi

The phosphors, Bi³⁺- activated Gd₂O₃:Er³⁺, were prepared by sol-gel combustion method, and their photoluminescent properties were investigated under ultraviolet light excitation. The emission spectrum exhibited sharp peaks at about 520, 535, 545, 550 and 559 nm due to (²H_11/2, ⁴S_3/2)→⁴I_15/2 transitions of Er³⁺ ions. The luminescent intensity was remarkably improved by the incorporation of Bi³⁺ ions under 340 nm light excitation, which suggested very efficient energy transfer from Bi³⁺ ions to Er³⁺ions. The introducing of Bi³⁺ ions broadened the excitation band of the phosphor, of which a new strong peak occurred ranging from 320 to 360 nm due to the 6s²→6s6p transition of Bi³⁺ ions. There is significant energy overlap between the emission band of Bi³⁺ ions and the excitation band of Er³⁺ ions. Under 340 nm light excitation, Bi³⁺ absorbed most of the energy and transferred it to Er³⁺. The energy transfer probability from Bi³⁺ to Er³⁺ is strongly dependent on the Bi³⁺ ion concentration. Also, the sensitization effectiveness was studied and discussed in this paper.     

Luminescence investigations on sulfate apatite Na6(SO4)2FCl:RE (RE=Dy, Ce or Eu) phosphors

A new phosphor in the Cl-F system doped with Dy, Ce and Eu has been reported. Characterization of this phosphor using XRD, PL and TL techniques is described. Polycrystalline Na₆(SO₄)₂FCl:Dy; Na₆(SO₄)₂FCl:Ce and Na₆(SO₄)₂FCl:Eu phosphors prepared by a solid state diffusion method have been studied for their X-ray diffraction, photoluminescence (PL) and thermoluminescence (TL)characteristics. The PL excitation and emission spectra of phosphors were obtained. Dy³⁺ emission in the host at 475 and 570 nm is observed due to ⁴F_9/2→⁶H_15/2 and ⁴F_9/2→⁶H_13/2 transition, respectively, whereas the PL emission spectra of Na₆(SO₄)₂FCl:Ce phosphor shows the Ce³⁺ emission at 322 nm due to 5d→4f transition of Ce³⁺ ion. In Na₆(SO₄)₂FCl:Eu lattice, Eu²⁺ as well as Eu³⁺ emissions are observed. The emission of europium ion in this compound exhibits the blue as well as red emission. The TL glow curves of the same compounds have the simple structure with a prominent peak at 150, 175 and 200 °C. TL response, fading, reusability and trapping parameters of the phosphors are also studied. The TL glow curves of γ-irradiated Na₆(SO₄)₂FCl sample show one glow peak indicating that only one set of traps is being activated within the particular temperature range each with its own value of activation energy (E) and frequency factor (s). The trapping parameters associated with the prominent glow peak are calculated using Chen’s half width method. The release of hole/electron from defect centers at the characteristic trap site initiates the luminescence process in these materials. The intensity of the TL glow peaks increases with increase of the added γ-ray dose to the samples.     

Photoluminescence and phosphorescence properties of MAl2O4:Eu, Dy (M=Ca, Ba, Sr) phosphors prepared at an initiating combustion temperature of 500 °C

Eu²⁺ and Dy³⁺ co-doped calcium aluminate, barium aluminate and strontium aluminate phosphors were synthesized at an initiating combustion temperature of 500 °C using urea as an organic fuel. The crystallinity of the phosphors was investigated by using X-ray diffraction (XRD) and the morphology was determined by a scanning electron microscope (SEM). The low temperature monoclinic structure for both CaAl₂O₄ and SrAl₂O₄ and the hexagonal structure of BaAl₂O₄ were observed. The effect of the host materials on the photoluminescence (PL) and phosphorescence properties were investigated by using a He-Cd Laser and a Cary Eclipse fluorescence spectrophotometer, respectively. The broad band emission spectra observed at 449 nm for CaAl₂O₄:Eu²⁺, Dy³⁺, 450 nm (with a shoulder-peak at 500 nm) for BaAl₂O₄:Eu²⁺, Dy³⁺ and 528 nm for SrAl₂O₄:Eu²⁺, Dy³⁺ are attributed to the 4f⁶5d¹ to 4f⁷ transition in the Eu²⁺ ion in the different hosts.     

Thermoluminescent properties of Eu and RE co-doped phosphors CaGa2S4:Eu, RE (RE=Ln, excluding Pm, Eu and Lu)

The thermo-luminescence (TL) of rare earth ions RE³⁺ (RE=Ln, excluding Pm, Eu and Lu) co-doped phosphors CaGa₂S₄:Eu²⁺, RE³⁺ was studied between room temperature and 300 °C, and 3D thermo-luminescence of the phosphors were measured from room temperature to 400 °C. The basic material CaGa₂S₄:Eu²⁺, showed at least two bands in the TL glow curve. Changing the auxiliary activator RE³⁺ (rare earth ion), intensities and the positions of the TL glow curve peaks were affected significantly. For the phosphors with long afterglow, auxiliary activator such as Ce³⁺, Pr³⁺, Gd³⁺, Tb³⁺, Ho³⁺, or Y³⁺ created some new defects in these compounds at lower trap levels and enhanced their TL intensities. The Nd³⁺ or Er³⁺ auxiliary activator only enhanced TL intensities to a low extent, so these two phosphors have short persistent luminescence at room temperature. TL intensities of La³⁺, Sm³⁺, Tm³⁺ or Yb³⁺ co-doped phosphors were suppressed greatly and no afterglow was shown. The relationship between auxiliary activators and corresponding thermo-luminescence curves of phosphors CaGa₂S₄:Eu²⁺, RE³⁺ are discussed in detail. According to our results, suitable activation energy and enough high corresponding trap density are necessary for the phosphor with long afterglow.     

Zero point shift in rare earth doped CaF2

The line position of the 4f ⁷(⁸ S _7/2)→4f ⁶5d (4130 Å) transition in Eu:CaF₂ has been measured as well as its shift under the action of uniaxial stress. These data are used to estimate the isotope shift due to the zero point vibrations. There is reasonable agreement with that measured directly in Sm:CaF₂.     

The effect of Y co-doping on the persistent up-conversion luminescence of the ZrO2:Yb,Er nanomaterials

The effect of the defects due to the charge compensation obtained with the yttrium co-doping to the ZrO₂:Yb³⁺,Er³⁺ up-converting phosphors was studied. The materials were prepared with the combustion method. The materials purity was analyzed with the FT-IR spectroscopy. The crystal structure was studied with the X-ray powder diffraction and the crystallite sizes were estimated with the Scherrer formula. Up-conversion luminescence was excited at room temperature with an IR-laser at 970 nm. The up-conversion luminescence spectra showed red (650-685 nm) and green emission (520-560 nm) due to the ⁴F_9/2→⁴I_15/2 and (²H_11/2,⁴S_3/2)→⁴I_15/2 transitions of Er³⁺, respectively. Persistent up-conversion luminescence was observed both in the Yb³⁺,Er³⁺ and Y³⁺,Yb³⁺,Er³⁺ doped materials.