Optical stack filters using parallel fuzzy logic

Stack filters are more general and robust nonlinear filters than median filter, which possess threshold decomposition and stacking properties. Stack filters can be carried out one step using optical parallel fuzzy logic technique instead of three steps in threshold decomposition. All window, width 3 stack filters but two trivial stack filters are expressed in unified expression with coefficiencies to choose desired stack filter, so they are realized by an optical approach, window 3×3 separable stack filters can be realized by cascading the window width 3 stack filters. Window width 5 stack filters can be realized using the same method.     

电压压调谐多级液晶滤光片的理论研究

依据电压调谐多级液晶滤光片的设计原理,给出了设计实例。主要讨论了三片液晶盒组成的多级滤光片,在滤光片系统中液晶盒可以采用相同厚度,也可以使厚度成一定比例。厚度成比例的多级滤光片,其透射波长可通过调节外加电压而连续改变,调谐范围400~800 nm,覆盖整个可见光区;采用相同厚度液晶盒组成的多级滤光片可以从多条谱线中滤出所需要的波长。原理上两种形式都可以获得性能良好的滤光片。     

Informationene

The flow rate of some liquids (water, heptane, toluene, xylene, dodecane) through Kapton nuclear track filters has been measured. The results can be interpreted with a modified Poiseuille formula. The influence of the viscosity of the liquids on their throughput through Kapton nuclear track filters has been determined. The purification of liquids with Kapton filters has been investigated. It is possible to measure the density of solid particles in deionized water by using Kapton filters. Consequently, nuclear track filters can remove solid particles from high-purity liquids. The soaking effect of some common liquid chemicals on Kapton filters has also been studied, no such soaking could be observed in most of the cases. Finally, these Kapton nuclear track filters are compared with a filter device from Hamamatsu (Japan).     

Tunable All-Optical Microwave Filters Based on Fiber Loop and Chirped Fiber Bragg Gratings

All-optical microwave filters are important parts of fiber-optic microwave/millimeter wave processing systems. In this paper, two novel passive tunable all-optical microwave filters based on fiber loop and chirped fiber Bragg gratings (CFBGs) are demonstrated, where the frequency response of the both filters can be continuously tuned by adjusting the wavelength of the input light. The required free spectral range (FSR) of the filters can be obtained by carefully controlling the length of fiber loop and the positions of the CFBGs in the fiber loop. Experimental results prove the feasibility of the proposed filtering structures.     

多层光子晶体滤波器研究

从双层结构出发研究了一种由多块不同的单周期光子晶体组合而成的多层结构的滤波器，论述了这种滤波器的工作原理，研究表明这种结构适于制作带通、窄带通过、带阻、宽带带阻、高通以及其它各种性能的滤波器。实验和理论研究的结果相一致。     

Effect of the third-order filter term on soliton interactions in soliton transmission systems with filters

The effect of the third-order filter term on soliton interactions in optical fibers with guiding filters is theoretically analyzed. We find that this term causes a significant difference to the interaction of solitons through filters among the regimes of without sliding, with up- and down-sliding frequencies of filters. It is shown that the interaction between solitons can be more effectively suppressed by up-sliding filters than that by down-sliding filters in the presence of the third-order filter term. Moreover, the third-order filter term is found to play a positive role in suppressing soliton interactions in the case of non-sliding.     

Programmable axial apodizing and hyperresolving amplitude filters with a liquid-crystal spatial light modulator

Amplitude-transmitting filters for apodizing and hyperresolving applications can be easily implemented by use of a two-dimensional programmable liquid-crystal spatial light modulator operating in a transmission-only mode. Experimental results are in excellent agreement with theoretical predictions. This approach can permit the analysis of various filter designs and can allow the filters to be changed rapidly to modify the response of an optical system.     

Evaluation of a method of simulating reduced frequency selectivity.

The accuracy of a method of simulating reduced frequency selectivity by the spectral smearing of complex stimuli has been evaluated. First an excitation pattern that would be evoked by a given nonsmeared stimulus in an impaired ear with broad auditory filters was estimated. Then the spectral smearing of the stimulus that would be necessary to create the same excitation pattern in a normal ear was calculated. The smearing was based on the shapes of simulated broad auditory filters; both symmetric and asymmetric broad filters were simulated. The method was used to process notched noise, and tones in notched noise, and the processed stimuli were used in a series of experiments with normally hearing subjects measuring the threshold for the tone in notched noise. The resulting data were used to derive auditory filter shapes. The derived filter shapes were generally similar to the expected shapes (based on the type of spectral smearing used), but there were some systematic discrepancies and some individual differences. The discrepancies do not seem to be due to the use of information derived from phase locking, since they were observed both at 1 kHz (where phase locking occurs) and at 6 kHz (where phase locking probably does not occurs). The discrepancies also do not seem to be due to the transmission characteristics of the outer/middle ear, since they occurred both when these characteristics were taken into account in the fitting procedure, and when the stimuli were preshaped to compensate for these characteristics. The influence of the subjects' own auditory filters probably can explain some of the discrepancies; the excitation pattern evoked by the spectrally smeared stimuli can be significantly influenced by the subjects' own filters when those filters are not much sharper than the simulated filters used to produce the smeared stimuli. Finally, some of the discrepancies can probably be explained by subjects combining information across auditory filters, rather than just using the single 'best' filter in each condition; this represents a limitation of the fitting procedure rather than of the simulation itself. Overall, the simulation worked reasonably well, especially when the smearing was based on symmetric filters.     

基于矢量衍射理论的相位型光瞳滤波器设计

根据矢量衍射理论,提出了一种设计纯相位型光瞳滤波器的新方法根据该方法所设计的滤波器主要应用于采用高数值孔径显微物镜的成像系统对点扩散函数中的指数因子进行二次近似处理后,可以得到超分辨参量与滤波器参量的近似关系式以三区相位型滤波器为例,讨论了该近似关系式的有效性给出一个设计实例,根据所要求的超分辨性能要求设计滤波器.模拟结果表明,该滤波器达到了设计要求,最后利用共焦系统点扩散函数的乘积特性,大大减弱了旁瓣的影响.     

Spatial Filters on Demand Based on Aperiodic Photonic Crystals

Photonic Crystal spatial filters, apart from stand‐alone spatial filtering function, can also suppress multi‐transverse‐mode operation in laser resonators. Here it is shown that such photonic crystals can be designed by solving the inverse problem: for a given spatial filtering profile. Optimized Photonic Crystal filters were fabricated in photosensitive glass. Experiments have shown that such filters provide a more pronounced filtering effect for total and partial transmissivity conditions.     

基于Fibonacci序列准周期结构的小角度低通空间滤波器

利用常规材料构造了Fibonacci序列准周期结构,运用传输矩阵法研究了该结构的空间传输特性,并基于该结构优良的空间传输特性设计了小角度低通空间滤波器.数值模拟结果表明,该小角度空间滤波器的角域带宽可通过改变序列的结构类型和序列数来调谐,其调谐规律为:随着Fibonacci序列F(m,1)中m值的增加,对应空间滤波器的角域带宽减小;随着序列数的增大,对应角域带宽也减小.在调谐的基础上,还可通过改变构成准周期结构的介质折射率参量来精确调节其角域带宽.相比于基于超材料的小角度空间滤波器而言,基于Fibonacci序列的小角度空间滤波器制备更简单,且有望应用于新一代的高功率激光系统中.     

Increasing the angular tolerance of resonant grating filters with doubly periodic structures

One can increase the angular tolerance of resonant grating filters without modifying the spectral bandwidth by adding a second grating component parallel to the first one. The angular tolerance and the filter linewidth can be controlled by the designer in an independent way. Numerical results show that this property permits the use of waveguide-grating filters with standard collimated beams.     

The Application of Genetic Algorithm in E-Plane Waveguide Filter Design

Traditional optimization methods, such as Powell's method and the Simplex method, are generally very difficult to design high performance filters with the relative band-width less than 0.15% or more than 10%. In this paper, Genetic Algorithm (GA) is used to design filters that meet these requirements. Two special filters are designed in this paper with the relative band-width as 0.15% and 25%, respectively. The numerical results demonstrate that GA can be used to design filters of superior quality when compared to the filters designed by using Powell's method or Simplex method.     

双Toraldo光瞳的共焦系统

Toraldo光瞳是超分辨中研究最多的光瞳之一.不过，由于实际中在制作精确度以及制造效率上的限制，它的应用受到了很大程度的制约.提出了双Toraldo光瞳的共焦系统，它能够用两个相对容易制作的Toraldo光瞳实现多区复杂Toraldo光瞳的功能. 关键词： 超分辨 Toraldo光瞳 共焦成像     

等离子体辅助制备窄带滤光片

研究了采用等离子辅助技术制备窄带滤光片的工艺。介绍了等离子辅助蒸镀系统的基本工作原理,描述了优化膜厚均匀性的过程。在有色玻璃上制备了由多层TiO2和SiO2薄膜组成的窄带滤光片,测试并分析了窄带滤光片的性能。试验结果表明,采用等离子体辅助蒸镀技术能够批量制备具有优良光学性能的窄带滤光片。     

直线型端口类盒型拓扑结构微带滤波器设计

针对微波带通滤波器小型化、高性能的应用需求,研究了基于双模方形环谐振器的直线型端口的两阶带通滤波器响应特性,进一步提出使用单模谐振器和双模谐振器相结合设计直线型端口的高阶微带带通滤波器。提出的直线型端口双模方形环微带滤波器具有类盒型拓扑结构,能够实现灵活的频率响应特性,而且传输零点的位置可调,能够满足不同的应用需求。由于存在寄生的对角交叉耦合路径,提出的类盒型拓扑结构微带滤波器可以实现一个额外的传输零点。为了验证结构和设计方法的可行性,设计了两款中心频率为5.2 GHz的三阶和五阶带通滤波器,最后进行加工和测试。耦合矩阵响应、仿真和测试结果一致性较好,表明了该结构实现高性能滤波器的可行性。     

Polarization-independent low-pass spatial filters based on one-dimensional photonic crystals containing negative-index materials

A new application of one-dimensional photonic crystals containing negative-index materials is proposed as low-pass spatial filters. Through optimizing the parameters of defect layer, a series of polarization-independent defect modes in the zero-average-index gap of the photonic crystals are obtained with the increase of the incident angle. Based on these defect modes, polarization-independent low-pass spatial filters are designed. The spatial-frequency bandwidth of the spatial filters can be adjusted by changing the period number of the defective photonic crystal structures. In addition, the effect of the losses of negative-index materials on the spatial filters is considered.     

Phase filters for correlators with incoherent light

Optimized phase filters can be designed and incorporated into hybrid electronic-optic correlators that exploit incoherent light. These filters lead to high optical efficiency and little, if any, loss of information that normally result from discarding amplitude data. The optimization procedure was experimentally tested by recording optimized filters in photo resist and incorporating them into the correlator. The optimization algorithm, the filter recording procedures, and the experiment correlation results demonstrating the efficacy of our design are presented. These results are superior when compared to those of correlators using holographic filters.     

Optimization of multiplexed holographic gratings in PQ-PMMA for spectral-spatial imaging filters

Holographic gratings formed in thick phenanthrenquinone- (PQ-) doped poly(methyl methacrylate) (PMMA) can be made to have narrowband spectral and spatial transmittance filtering properties. We present the design and performance of angle-multiplexed holographic filters formed in PQ-PMMA at 488 nm and reconstructed with a LED operated at approximately 630 nm. The dark delay time between exposure and the preillumination exposure of the polymer prior to exposure of the holographic area are varied to optimize the diffraction efficiency of multiplexed holographic filters. The resultant holographic filters can enhance the performance of four-dimensional spatial-spectral imaging systems. The optimized filters are used to simultaneously sample spatial and spectral information at five different depths separated by 50 microm within biological tissue samples.     

Limitations of superoscillation filters in microscopy applications

The idea of superresolving pupil filters comes from the concept of superoscillations that may occur in regions of a band-limited signal with small amplitude having oscillations faster than the fastest Fourier component of the signal. In optical microscopy, superresolution can be achieved by appropriate design of pupil functions where the angular aperture determines the ultimate focal spot smaller than the Abbe diffraction limit outside the evanescent field region. The angular aperture cannot be increased indefinitely and the huge sidelobes cannot be avoided that are present in superresolving filters. The limitations of using such kind of filters in microscopy applications are discussed through computational examples.