Interface phonon-polaritons in quantum well systems of polar ternary mixed crystals

The interface phonon-polaritons in quantum well systems consisting of polar ternary mixed crystals are investi-gated. The numerical results of the interface phonon-polariton frequencies in the GaAs/AlxGa1-xAs, ZnSxSe1-x/ZnS, and ZnxCd1-xSe/ ZnSe quantum well systems are obtained and discussed. It is shown that there are six branches of interface phonon-polariton modes distributed in three bulk phonon-polariton forbidden bands in the systems. The electric fields of interface phonon-polaritons are also presented and show the interface locality of the modes. The effects of the ’two-mode’ and ’one-mode’ behaviours of the ternary mixed crystals on the interface phonon-polariton modes are shown in the dispersion curves.     

Optical vibration modes and electron－phonon interaction in ternary mixed crystals of polar semiconductors

Optical vibrations of the lattice and the electron－phonon interaction in polar ternary mixed crystals are studied in the framework of the continuum model of Born and Huang and the random-element-isodisplacement model. A normal-coordinate system to describe the optical vibration in ternary mixed crystals is correctly adopted to derive a new Fr?hlich-like Hamiltonian for the electron－phonon interaction including the unit-cell volume variation influence. The numerical results for the phonon modes, the electron－phonon coupling constants and the polaronic energies for several typical materials are obtained. It is verified that the nonlinearity of the electron－phonon coupling effects with the composition is essential and the unit-cell volume effects cannot be neglected for most ternary mixed crystals.     

Polarons with Spatially Dependent Mass in a Finite Parabolic Quantum Well

We study the energy levels of an electron (or hole) polaron in a parabolic quantum well structure,including the spatial dependence of the effective mass.We also consider the two-mode behaviour of longitudinal optical phonon modes of the ternary mixed crystals in the structure,in the calculation of the effect of the electron phonon interaction.We calculate the ground state,the first excited state and the transition energy of an electron (or hole) in the GaAs/AlxGa1-xAs parabolic quantum well structure.The numerical results show that the electron-phonon interaction obviously affects the energy levels of the electron (or hole),which are in agreement with experimental results.     

Be-composition effect on structure, electronic and optical properties of BexZn1-xO alloys

This paper carries out first principles calculation of the structure,electronic and optical properties of Be x Zn 1 x O alloys based on the density-functional theory for the compositions x = 0.0,0.25,0.5,0.75,1.0.The lattice constants deviations of alloys obey Vegard’s law well.The Be x Zn 1 x O alloys have the direct band gap(Γ-Γ) character,and the bowing coefficients are less than the available theoretical values.Moreover,it investigates in detail the optical properties(dielectric functions,absorption spectrum and refractive index) of these ternary mixed crystals.The obtained results agree well with the available theoretical and experimental values.     

无序一维三元光子晶体的带隙展宽

Bandgap properties of disordered one-dimensional (1D) ternary photonic crystals are investigated by optical transfer matrix method for the first time . The results show that disordered structure provides strikingly extended bandgap compared with the corresponding periodic structure. The more ingredient of disordered dielectric multilayers adopted in the calculation, the wider stop band will be obtained. The influence of degree of disorder D and contrast of high and low refractive indices to the photonic bandgap are also calculated and discussed.     

Theoretical and experimental investigations of flexural wave propagation in periodic grid structures designed with the idea of phononic crystals

The propagation characteristics of flexural waves in periodic grid structures designed with the idea of phononic crystals are investigated by combining the Bloch theorem with the finite element method. This combined analysis yields phase constant surfaces, which predict the location and the extension of band gaps, as well as the directions and the regions of wave propagation at assigned frequencies. The predictions are validated by computation and experimental analysis of the harmonic responses of a finite structure with 11×11 unit cells. The flexural wave is localized at the point of excitation in band gaps, while the directional behaviour occurs at particular frequencies in pass bands. These studies provide guidelines to designing periodic structures for vibration attenuation.     

Binding energies of impurity states in strained wurtzite GaN/Al_xGa_(1-x)N heterojunctions with finitely thick potential barriers

Ground state binding energies of donor impurities in a strained wurtzite GaN/AlxGal_xN heterojunction with a po- tential barrier of finite thickness are investigated using a variational approach combined with a numerical computation. The built-in electric field due to the spontaneous and piezoelectric polarization, the strain modification due to the lattice mismatch near the interfaces, and the effects of ternary mixed crystals are all taken into account. It is found that the binding energies by using numerical wave functions are obviously greater than those by using variational wave functions when impurities are located in the channel near the interface of a heterojunction. Nevertheless, the binding energies using the former functions are obviously less than using the later functions when impurities are located in the channel far from an interface. The difference between our numerical method and the previous variational method is huge, showing that the former should be adopted in further work for the relevant problems. The binding energies each as a function of hydrostatic pressure are also calculated. But the change is unobvious in comparison with that obtained by the variational method.     

Fabrication of Two-Dimensional Photonic Crystals with Controlled Defects by Combination of Holographic Lithography and Two-Photon Polymerization

A new ternary photopolymer system is used in fabricating photonic crystals （PhCs） with controlled defects by combination of single-photon and two-photon photopolymerization. The former process can produce PhCs in one-step recording with a low-power （tens mW） continuous-wave laser at 532nm, while the latter can create desired defects. The preparation of the material, the optical setup and the preliminary experimental results are given. Compared with other methods, this approach is much more accessible and convenient for use of visible light and has advantages of making PhCs in a large scale quickly and economicaJly and introducing any defects exactly, especially for three-dimensional structures.     

Effects of NaN3 Added in Fe-C System on Inclusion and Impurity of Diamond Synthesized at High Pressure and High Temperature

Effects of NaN3 added in Fe-C system to synthesize nitric diamond at high pressure and high temperature are investigated. Diamond crystals with high nitrogen concentration are synthesized by the system of Fe-C and NaN3 additive at pressure 5.8 GPa and at temperatures 1750-1780 K for 15 min. The synthetic diamond crystals have a cubo-octahedral or octahedral shape with yellowish green or green colour. Some disfigurements are observed on the surfaces of most diamond crystals. The composition and content of inclusions formed by iron in diamond are changed and iron nitride is detected in diamond crystals synthesized with Fe-C-NaN3 additive. As the amount of NaN3 additive increases, Fe3C decreases and iron nitride increases with α-Fe being nearly constant. Moreover, the nitrogen concentrations in diamond crystals synthesized with 1.5 wt% NaN3 additive is up to 2250ppm in substitutional form.     

纤锌矿氮化物量子阱中光学声子模的三元混晶效应

本文先比较了几种常用方法(修正的无规元素等位移模型、虚晶近似和简化相干势近似等)对纤锌矿三元混晶体声子频率的拟合结果,再选用与实验数据接近的拟合方法,结合介电连续和单轴晶体模型导出含纤锌矿三元混晶In_xGa_1－xN和Al_xGa_1－xN单量子阱各类光学声子模的色散关系,进一步分析了声子模随组分的变化. 结果表明,修正的无规元素等位移模型对单模性纤锌矿     

Enhanced interface properties of diamond MOSFETs with Al_2O_3 gate dielectric deposited via ALD at a high temperature

The interface state of hydrogen-terminated(C–H) diamond metal–oxide–semiconductor field-effect transistor(MOSFET) is critical for device performance. In this paper, we investigate the fixed charges and interface trap states in C–H diamond MOSFETs by using different gate dielectric processes. The devices use Al_2O_3 as gate dielectrics that are deposited via atomic layer deposition(ALD) at 80℃ and 300℃, respectively, and their C–V and I–V characteristics are comparatively investigated. Mott–Schottky plots(1/C~2–VG) suggest that positive and negative fixed charges with low density of about 1011 cm~(-2) are located in the 80-℃-and 300-℃ deposition Al_2O_3 films, respectively. The analyses of direct current(DC)/pulsed I–V and frequency-dependent conductance show that the shallow interface traps(0.46 e V–0.52 e V and0.53 e V–0.56 e V above the valence band of diamond for the 80-℃ and 300-℃ deposition conditions, respectively) with distinct density(7.8 × 10~(13) e V~(-1)·cm~(-2)–8.5 × 10~(13) e V-1·cm~(-2) and 2.2 × 1013 e V~(-1)·cm~(-2)–5.1 × 10~(13) e V~(-1)·cm~(-2) for the80-℃-and 300-℃-deposition conditions, respectively) are present at the Al_2O_3/C–H diamond interface. Dynamic pulsed I–V and capacitance dispersion results indicate that the ALD Al_2O_3 technique with 300-℃ deposition temperature has higher stability for C–H diamond MOSFETs.     

Steady-state and transient electronic transport properties of β-(AlxGa1-x)2O3/Ga2O3 heterostructures: An ensemble Monte Carlo simulation

The steady-state and transient electron transport properties of $\beta $-(Al$_{x}$Ga$_{1-x}$)$_{2}$O$_{3}$/Ga$_{2}$O$_{3}$ heterostructures were investigated by Monte Carlo simulation with the classic three-valley model. In particular, the electronic band structures were acquired by first-principles calculations, which could provide precise parameters for calculating the transport properties of the two-dimensional electron gas (2DEG), and the quantization effect was considered in the $\varGamma $ valley with the five lowest subbands. Wave functions and energy eigenvalues were obtained by iteration of the Schrödinger-Poisson equations to calculate the 2DEG scattering rates with five main scattering mechanisms considered. The simulated low-field electron mobilities agree well with the experimental results, thus confirming the effectiveness of our models. The results show that the room temperature electron mobility of the $\beta $-(Al$_{0.188}$Ga$_{0.812}$)$_{2}$O$_{3}$/Ga$_{2}$O$_{3}$ heterostructure at 10 kV$ \cdot$cm$^{-1}$ is approximately 153.669 cm$^{2}\cdot$V$^{-1}\cdot$s$^{-1}$, and polar optical phonon scattering would have a significant impact on the mobility properties at this time. The region of negative differential mobility, overshoot of the transient electron velocity and negative diffusion coefficients are also observed when the electric field increases to the corresponding threshold value or even exceeds it. This work offers significant parameters for the $\beta$-(Al$_{x}$Ga$_{1-x}$)$_{2}$O$_{3}$/Ga$_{2}$O$_{3}$ heterostructure that may benefit the design of high-performance $\beta$-(Al$_{x}$Ga$_{1-x}$)$_{2}$O$_{3}$/Ga$_{2}$O$_{3}$ heterostructure-based devices.     

Impact of AlxGa1-xN barrier thickness and Al composition on electrical properties of ferroelectric HfZrO/Al2O3/AlGaN/GaN MFSHEMTs

Ferroelectric (FE) HfZrO/Al$_{2}$O$_{3}$ gate stack AlGaN/GaN metal-FE-semiconductor heterostructure high-electron mobility transistors (MFSHEMTs) with varying Al$_{x}$Ga$_{1-x}$N barrier thickness and Al composition are investigated and compared by TCAD simulation with non-FE HfO$_{2}$/Al$_{2}$O$_{3}$ gate stack metal-insulator-semiconductor heterostructure high-electron mobility transistors (MISHEMTs). Results show that the decrease of the two-dimensional electron gas (2DEG) density with decreasing AlGaN barrier thickness is more effectively suppressed in MFSHEMTs than that in MISHEMTs due to the enhanced FE polarization switching efficiency. The electrical characteristics of MFSHEMTs, including transconductance, subthreshold swing, and on-state current, effectively improve with decreasing AlGaN thickness in MFSHEMTs. High Al composition in AlGaN barrier layers that are under 3-nm thickness plays a great role in enhancing the 2DEG density and FE polarization in MFSHEMTs, improving the transconductance and the on-state current. The subthreshold swing and threshold voltage can be reduced by decreasing the AlGaN thickness and Al composition in MFSHEMTs, affording favorable conditions for further enhancing the device.     

High density Al2O3/TaN-based metal--insulator-- metal capacitors in application to radio frequency integrated circuits

Metal-insulator-metal （MIM） capacitors with atomic-layer-deposited Al2O3 dielectric and reactively sputtered TaN electrodes in application to radio frequency integrated circuits have been characterized electrically. The capacitors exhibit a high density of about 6.05 fF/μm^2, a small leakage current of 4.8 × 10^-8 A/cm^2 at 3 V, a high breakdown electric field of 8.61 MV/cm as well as acceptable voltage coefficients of capacitance （VCCs） of 795 ppm/V2 and 268ppm/V at 1 MHz. The observed properties should be attributed to high-quality Al2O3 film and chemically stable TaN electrodes. Further, a logarithmically linear relationship between quadratic VCC and frequency is observed due to the change of relaxation time with carrier mobility in the dielectric. The conduction mechanism in the high field ranges is dominated by the Poole-Frenkel emission, and the leakage current in the low field ranges is likely to be associated with trap-assisted tunnelling. Meanwhile, the Al2O3 dielectric presents charge trapping under low voltage stresses, and defect generation under high voltage stresses, and it has a hard-breakdown performance.     

Physical analysis of normally-off ALD Al2O3/GaN MOSFET with different substrates using self-terminating thermal oxidation-assisted wet etching technique

Based on the self-terminating thermal oxidation-assisted wet etching technique, two kinds of enhancement mode Al$_{2}$O$_{3}$/GaN MOSFETs (metal-oxide-semiconductor field-effect transistors) separately with sapphire substrate and Si substrate are prepared. It is found that the performance of sapphire substrate device is better than that of silicon substrate. Comparing these two devices, the maximum drain current of sapphire substrate device (401 mA/mm) is 1.76 times that of silicon substrate device (228 mA/mm), and the field-effect mobility ($\mu_{\rm FEmax}$) of sapphire substrate device (176 cm$^{2}$/V$\cdot$s) is 1.83 times that of silicon substrate device (96 cm$^{2}$/V$\cdot$s). The conductive resistance of silicon substrate device is 21.2 $\Omega {\cdot }$mm, while that of sapphire substrate device is only 15.2 $\Omega {\cdot }$mm, which is 61% that of silicon substrate device. The significant difference in performance between sapphire substrate and Si substrate is related to the differences in interface and border trap near Al$_{2}$O$_{3}$/GaN interface. Experimental studies show that (i) interface/border trap density in the sapphire substrate device is one order of magnitude lower than in the Si substrate device, (ii) Both the border traps in Al$_{2}$O$_{3}$ dielectric near Al$_{2}$O$_{3}$/GaN and the interface traps in Al$_{2}$O$_{3}$/GaN interface have a significantly effect on device channel mobility, and (iii) the properties of gallium nitride materials on different substrates are different due to wet etching. The research results in this work provide a reference for further optimizing the performances of silicon substrate devices.     

Surface phonon–polaritons in rectangular quantum wires of polar ternary mixed crystals

In this paper, the dispersion relations of surface phonon–polaritons in freestanding rectangular quantum wire systems of polar ternary mixed crystals are derived. The numerical calculations for Al_xGa_1−xAs and Zn_xCd_1−xSe quantum wire systems are performed. The results reveal that the frequencies of surface phonon–polariton modes are sensitive to the geometric structures of the quantum wires, the wave-vectors in z-direction, and the compositions of the ternary mixed crystal materials. The effects of the “two-mode” and “one-mode” behaviors of the ternary mixed crystals on the surface phonon–polariton modes are also discussed.     

Surface and interface phonon-polaritons in freestanding quantum well wire systems of polar ternary mixed crystals

The surface and interface phonon-polaritons in freestanding rectangular quantum well wire systems consisting of polar ternary mixed crystals are investigated in the modified random-element-isodisplacement model and the Born–Huang approximation, based on the Maxwell's equations with the boundary conditions. The numerical results of the surface and interface phonon-polariton frequencies as functions of the wave-vector, geometric structure, and the composition of the ternary mixed crystals in GaAs/Al_xGa_1−xAs and Zn_xCd_1−xSe/ZnSe quantum well wire systems are obtained and discussed. It is shown that there are 10 and 8 branches of surface and interface phonon-polaritons in the two quantum well wire systems respectively. The effects of the “two-mode” and “one-mode” behaviors of the ternary mixed crystals on the surface and interface phonon-polariton modes are shown in the dispersion curves.     

三元混晶四层系统的表面和界面声子极化激元

运用改进的无规元素等位移模型和玻恩-黄近似,结合电磁场的麦克斯韦方程和边界条件,研究了真空/极性二元晶体薄膜/极性三元混晶薄膜/极性二元晶体衬底四层系统的表面和界面声子极化激元.以AlxGa1-xAs/GaAs和ZnxCd1-xSe/ZnSe为例,获得了表面和界面声子极化激元模的色散关系以及表面模和界面模的频率随混晶组分和薄膜厚度的变化关系.结果表明,三元混晶四层异质结系统中存在七支表面和界面声子极化激元模,且这七支表面模和界面模的频率随混晶组分和薄膜厚度呈非线性变化,三元混晶的"单模"和"双模"性也在色散曲线中得到了很好的体现.