Study on CYCIAE-100 radiation field and residual radioactivity

The accelerators should be properly designed to make the radiation field produced by beam loss satisfy the dose limits. The radiation field for high intensity H^－ cyclotron includes prompt radiation and residual radiation field. The induced radioactivity in accelerator components is the dominant source of occupational radiation exposure if the accelerator is well shielded. The source of radiation is the beam loss when cyclotron is operating. In this paper, the radiation field for CYCIAE-100 is calculated using Monte Carlo method and the radioactive contamination near stripping foil is studied. A method to reduce the dose equivalent rate of maintenance staff is also given.     

Study on the radiation problem caused by electron beam loss in accelerator tubes

The beam dynamic code PARMELA was used to simulate the transportation process of accelerating electrons in S-band SW linacs with different energies of 2.5, 6 and 20MeV. The results indicated that in the ideal condition, the percentage of electron beam loss was 50% in accelerator tubes. Also we calculated the spectrum, the location and angular distribution of the lost electrons. Calculation performed by Monte Carlo code MCNP demonstrated that the radiation distribution of lost electrons was nearly uniform along the tube axis, the angular distributions of the radiation dose rates of the three tubes were similar, and the highest leaking dose was at the angle of 160° with respect to the axis. The lower the energy of the accelerator, the higher the radiation relative leakage. For the 2.5MeV accelerator, the maximum dose rate reached 5% of the main dose and the one on the head of the electron gun was 1%, both of which did not meet the eligible protection requirement for accelerators. We adopted different shielding designs for different accelerators. The simulated result showed that the shielded radiation leaking dose rates fulfilled the requirement.     

Physical design of a 10 MeV LINAC for polymer radiation processing

In China, polymer radiation processing has become one of the most important processing industries. The radiation processing source may be an electron beam accelerator or a radioactive source. Physical design of an electron beam facility applied for radiation crosslinking is introduced in this paper because of it’s much higher dose rate and efficiency. Main part of this facility is a 10 MeV travelling wave electron linac with constant impedance accelerating structure. A start to end simulation concerning the linac is reported in this paper. The codes Opera-3d, Poisson-superfish and Parmela are used to describe electromagnetic elements of the accelerator and track particle distribution from the cathode to the end of the linac. After beam dynamic optimization, wave phase velocities in the structure have been chosen to be 0.56, 0.9 and 0.999 respectively. Physical parameters about the main elements such as DC electron gun, iris-loaded periodic structure, solenoids, etc, are presented. Simulation results proves that it can satisfy the industrial requirement. The linac is under construction. Some components have been finished. Measurements proved that they are in a good agreement with the design values.     

Simulation of electron behavior in PIG ion source for 9 MeV cyclotron

In this paper, we focus on a PIG source for producing intense H-ions inside a 9 MeV cyclotron. The properties of the PIG ion source were simulated for a variety of electric field distributions and magnetic field strengths using a CST particle studio. After analyzing the secondary electron emission (SEE) as a function of both magnetic and electric field strengths, we found that for the modeled PIG geometry, a magnetic field strength of 0.2 T provided the best results in terms of the number of secondary electrons. Furthermore, at 0.2 T, the number of secondary electrons proved to be greatest regardless of the cathode potential. Also, the modified PIG ion source with quartz insulation tubes was tested in a KIRAMS-13 cyclotron by varying the gas flow rate and arc current, respectively. The capacity of the designed ion source was also demonstrated by producing plasma inside the constructed 9 MeV cyclotron. As a result, the ion source is verified as being capable of producing an intense H^- beam and high ion beam current for the desired 9 MeV cyclotron. The simulation results provide experimental constraints for optimizing the strength of the plasma and final ion beam current at a target inside a cyclotron.     

Controlling Halo-Chaos via Variable Structure Method

We propose a variable structure control method which is another innovative technique for suppressing beam halo-chaos in the periodic focusing channels of high-current proton beam accelerator, which belongs to a high-tech field.The analysis and numerical results show that the method is effective for controlling beam halo-chaos. Physical implementation of such a kind of control strategy remains an important and open issue for further applications.     

Controlling beam halo-chaos via backstepping design

A backstepping control method is proposed for controlling beam halo-chaos in the periodic focusing channels （PFCs） of high-current ion accelerator. The analysis and numerical results show that the method, via adjusting an exterior magnetic field, is effective to control beam halo chaos with five types of initial distribution ion beams, all statistical quantities of the beam halo-chaos are largely reduced, and the uniformity of ion beam is improved. This control method has an important value of application, for the exterior magnetic field can be easily adjusted in the periodical magnetic focusing channels in experiment.     

Milliampere He2+ beam generator using a compact GHz ECRIS

Multi-charged helium ion beam He2+ is useful for helium accelerator to obtain a higher energy with lower cost and for deuterium accelerator to avoid neutron activation during machine commissioning.An attempt to generate milliampere multi-charged helium He2+ion beam with a 2.45 GHz electron cyclotron resonance ion source(ECRIS) was tested recently.A design using a specfic permanent magnet 2.45 GHz ECRIS(PMECRIS) source(ERCIS) is reported and the He2+beam production ability is described.With this source,we produced a total helium beam of 40 mA at 40 kV with 180 W of net microwave power and a gas flow of less than 0.5 sccm.At steady state the He2+beam intensity is 4.4 mA,that being the fraction of multi-charged helium ion beam is at approximately 11%.     

超导ECR离子源DECRIS-SC2

A new compact version of the"liquid He-free"superconducting Electron Cyclotron Resonance Ion Source,to be used as an injector for the U-400M cyclotron,is presently under construction at the FLNR in collaboration with LHE(JINR).The axial magnetic field of the source is created by the superconducting magnet,and the NdFeB hexapole is used for the radial plasma confinement.The microwave frequency of 14GHz will be used for ECR plasma heating.The DECRIS-SC2 superconducting magnet is designed for the induction of a magnetic field on the axis of the source of up to 1.4T(extraction side)and 1.9T(injection side) at nominal current of 75A.Cooling of the coils is carried out by CM cryocooler with cooling power of 1W at the temperature 4.5K.The basic design features of the superconducting magnet and of the ion source are presented.The main parts of the source are in production.The first beam test of the source is expected in the beginning of 2007.     

Preliminary shielding analysis in support of the CSNS target station shutter neutron beam stop design

The construction of China Spallation Neutron Source (CSNS) has been initiated in Dongguan, Guangdong, China. Thus a detailed radiation transport analysis of the shutter neutron beam stop is of vital importance. The analyses are performed using the coupled Monte Carlo and multi-dimensional discrete ordinates method. The target of calculations is to optimize the neutron beamline shielding design to guarantee personal safety and minimize cost. Successful elimination of the primary ray effects via the two-dimensional uncollided flux and the first collision source methodology is also illustrated. Two-dimensional dose distribution is calculated. The dose at the end of the neutron beam line is less than 2.5 μSv/h. The models have ensured that the doses received by the hall staff members are below the standard limit required.     

Preliminary design of a laser accelerator beam line

A compact laser plasma accelerator(CLAPA) is being built at Peking University, which is based on an RPA-PSA mechanism or other acceleration mechanisms. The beam produced by this laser accelerator has the characteristics of short duration, high pulse current, large divergence angle, and wide energy spectrum. The beam cannot be produced by a normal ion source and accelerator. The space charge field in the initial is very strong.According to the beam parameters from preparatory experiments and theoretical simulations, a compact beam line is preliminarily designed. The beam line mainly consists of common transport elements to deliver proton beam with the energy of 1–50 MeV, energy spread of 0–±1% and current of 0–108 proton per pulse to satisfy the requirement of different experiments. The simulation result of a 15 MeV proton beam with an energy spread of ±1%, current of 400 m A, and final spot radius of 9 mm is presented in this paper.     

Acceleration and radiation of externally injected electrons in laser plasma wakefield driven by a Laguerre-Gaussian pulse

By using three-dimensional particle-in-cell simulations, externally injected electron beam acceleration and radiation in donut-like wake fields driven by a Laguerre-Gaussian pulse are investigated. Studies show that in the acceleration process the total charge and azimuthal momenta of electrons can be stably maintained at a distance of a few hundreds of micrometers. Electrons experience low-frequency spiral rotation and high-frequency betatron oscillation, which leads to a synchrotron-like radiation. The radiation spectrum is mainly determined by the betatron motion of electrons. The far field distribution of radiation intensity shows axial symmetry due to the uniform transverse injection and spiral rotation of electrons. Our studies suggest a new way to simultaneously generate hollow electron beam and radiation source from a compact laser plasma accelerator.     

95 MeV射频电子直线加速器辐射防护分析

应相关建设安评、环评、稳评以及职业健康评估的要求,电子加速器设计过程中即应对其辐射情况进行分析。针对电子能量为40～95 MeV可调的光阴极微波电子枪直线加速器,对其辐射源项进行分析,并讨论了可能的辐射防护措施的效果。采用蒙特卡罗软件FLUKA对电子束流和加速器进行建模,通过模拟计算发现,加速器产生的等效剂量分布主要位于废束桶中,废束桶以外辐射剂量迅速下降,在电子加速器实验大厅四周设置混凝土墙体的情况下辐射等效剂量率将随墙体厚度迅速下降。若混凝土墙体厚度设置为1 m,则墙体外工作人员所在区域辐射等效剂量率不高于1 μSv/h量级,能够有效屏蔽加速器产生的电离辐射,给工作人员提供有效防护。研究方法及结果对同能区同类型加速器建设中的辐射分析及辐射防护评估具有一定的参考价值。     

蒙特卡罗模拟分析电子束发射度对照射量空间分布影响

加速器靶前正前方1 m处的照射量是衡量加速器光源辐射能力的重要物理参量。电子束轰击高原子序数靶产生的X射线空间分布具有很强的前冲性,照射量空间分布与电子束的发射度密切相关。采用高斯函数对不同电子束发射度条件下入射电子的空间分布和角度分布进行建模。应用蒙特卡罗方法对电子束打靶的轫致辐射过程进行模拟,分析电子束发射度对照射量的影响。同时还对整靶结构和叠靶结构下的轫致辐射光源照射量进行计算比较。结果表明,电子束的发散角是影响轫致辐射光源照射量的主要因素。与采用整靶结构相比,采用叠靶结构所获得的照射量空间分布基本一致,在正前方小角度范围内（0~4）的照射量有2%~3%的降低。     

同步辐射光源的反馈控制模型

同步辐射光源的不稳定性是客观存在的问题,产生不稳定性的原因很多。对系统中客观存在的物理现象进行了讨论,提出了一些解决问题的方法,特别是反馈控制。同步辐射加速器反馈控制是一个比较复杂的问题,它涉及到高能电子束团在相空间的稳定运动。在实际应用中,存在一些反馈系统在一定程度上改善了同步辐射光源的稳定性,对实际应用于同步辐射装置的反馈系统进行了分析,提出了适合于同步辐射光源的反馈控制模型。     

High-resolution gamma-ray radiography produced by a laser-plasma driven electron source

An electron beam from a laser-plasma accelerator is converted into a gamma-ray source using bremsstrahlung radiation in a dense material. The gamma-ray beam has a pointlike source size because it is generated by a high quality electron beam with a small source size and a low divergence. Using this gamma-ray source, the radiography of complex and dense objects with submillimeter resolution is performed. It is the first evidence of a gamma-ray source size of a few hundreds micrometers produced with laser-driven accelerators. This size is consistent with results from Monte Carlo simulations.     

X波段短脉冲相对论返波管设计与初步实验

 对基于短电子束脉冲超辐射机理的X波段相对论返波管进行了优化设计和粒子模拟，结果表明：在超辐射机理作用下，该器件能实现高峰值功率和高功率转换效率的微波辐射。在小型Tesla脉冲源基础上设计了阻抗变换段、二极管、磁场系统等装置，建立了一套小型窄脉冲电子加速器，以此为实验平台在低磁场条件下进行了器件的初步实验研究。在磁场0.73 T、束压约380 kV、束流约4.5 kA、脉宽3.1 ns条件下，实验获得的微波脉冲峰值功率约360 MW，脉宽1.10 ns，上升沿800 ps，频率9.15 GHz，功率转换效率为21%。     

Low emittance lattice for the storage ring of the Turkish Light Source Facility TURKAY

The TAC(Turkish Accelerator Center) project aims to build an accelerator center in Turkey. The first stage of the project is to construct an Infra-Red Free Electron Laser(IR-FEL) facility. The second stage is to build a synchrotron radiation facility named TURKAY, which is a third generation synchrotron radiation light source that aims to achieve a high brilliance photon beam from a low emittance electron beam at 3 Ge V. The electron beam parameters are highly dependent on the magnetic lattice of the storage ring. In this paper a low emittance storage ring for TURKAY is proposed and the beam dynamic properties of the magnetic lattice are investigated.     

Spatial coherence in the transition radiation spectrum

The formal expression of the spectral distribution of the transition radiation intensity will be here derived in the case of a relativistic three-dimensional charged beam. Charged beams with a particle density such as is typically encountered in a particle accelerator will be considered. In particular, a sufficiently high particle density will be supposed so that a continuous spatial distribution function can be reliably attributed to the charged bunch. The formula of the spectral distribution of the transition radiation intensity originated by a relativistic three-dimensional charged beam - already presented in a previous work - will be here submitted to a formal check and interpreted in the physical consequences. The present work contains an additional mathematical derivation of the radiation energy spectrum consisting in a different method to implement the continuous limit in the distribution function of the particle coordinates. In the former derivation of the formula, the average operation with respect to the continuous distribution function of the particle coordinates was applied to the radiation intensity of a N electron bunch. In the present one, it is applied to the radiation electric field of a N electron bunch. The comparison of the two alternative but in any case equivalent formal routes to the spectral distribution of the transition radiation intensity will offer the possibility to directly cross-check the mathematical self-consistency of the presented results within the limits of applicability of the continuous limit approximation. According to such results, both the flux and the angular distribution of the photons emitted at a given wavelength - even shorter than the longitudinal length of the bunch - are expected to undergo a modification as the beam transverse size is varied with respect to the observed wavelength. As a function of the beam transverse size the spatial coherence degree of the transition radiation source is thus expected to change. The physical consistency of such an effect occurring in the transition radiation emission by a charged beam can be argued on the basis of a compatibility criterion with other similar relativistic electromagnetic radiative phenomena and interpreted in the framework of the temporal causality and the Huygens-Fresnel principles. Finally, the aspect of the applicability of the continuous limit approximation to the case of a charged beam in a particle accelerator is treated in terms of a practical quantitative criterion.