微穿孔板吸声结构水下应用研究

马大猷教授提出的微穿孔板吸声结构在空气噪声降低和隔离方面得到了广泛的应用,但未见水下应用的相关研究和报道。本文将空气中微穿孔板理论应用到水中,得到了水下微穿孔板吸声结构的吸声公式。通过理论分析,得出了微穿孔板结构直接应用于水中无法获得宽频吸收的结论。提出了通过匹配液将微穿孔板间接应用到水下的设想。设计了单层板和双层板吸声结构,并对它们的吸声特性进行了理论分析与仿真。结果表明,本文设计的微穿孔板吸声结构在水中能够获得优于空气中的宽频带吸声效果。实验测量了自制的微穿孔板吸声结构,吸声系数的测量值与理论曲线基本吻合,从而验证了理论分析的正确性。     

水下微穿孔吸声体结构设计与试验研究

根据马大猷院士的微穿孔板(MPP)理论,提出在可设计的夹芯复合隐身结构的空腔中附加微穿孔板层的水下微穿孔吸声体。基于微穿孔板的精确计算理论及水下声隐身结构的特点,考虑空腔深度、穿孔板厚度、穿孔直径及穿孔率等对微穿孔板吸声性能的影响,对水下微穿孔吸声体进行了结构设计。利用脉冲声管法对水下微穿孔吸声体试样的吸声系数进行了测量,结果表明:水下微穿孔吸声体有效地拓宽了低频吸声频带,其微穿孔板结构参数的影响规律也与理论分析一致;对于多种吸声机理并存的水下微穿孔吸声体的空腔个数、形状及谐振特性等也是影响吸声性能的重要因素,在实际的工程应用中必须结合所关心的频带对水下微穿孔吸声体进行匹配优化设计。      

水下弹性微穿孔吸声结构吸声系数研究

利用模态叠加法建立了水介质微穿孔板的数学模型,基于声电类比法得到其等效电路模型。研究了弹性微穿孔板和弹性背腔对垂直入射吸声系数的影响。与空气介质中的微穿孔板不同,水下微穿孔板因结构阻抗不足,难以取得满意的吸声效果,为此提出了增强型微穿孔吸声结构,并在水介质阻抗管内对理论结果予以验证。结果表明,随着增强型弹性微穿孔板弯曲刚度的增大,其在[20,2000]Hz范围内的平均吸声系数得到提高,逐步趋近于刚性微穿孔板的结果,弹性背板使微穿孔吸声结构的吸声峰向低频移动,低频吸声效果得到提高。      

微穿孔板吸声体的研究进展

简述了马大猷教授的微穿孔板基本理论、微穿孔板吸声体在扩散声场以及在高声强环境下的理论要点。比较详细地讨论了30年来与马大猷教授所提理论相对应的实验研究结果及应用发展情况。基于马大猷教授的基本理论,提出了一种新的相关衍生结构——管束微穿孔板。对微穿孔板吸声体的发展趋势做了展望。表明:微穿孔板吸声体将成为新世纪的绿色理想吸声材料。     

微穿孔板吸声结构仿真计算方法研究

本文提出将马氏微穿孔板理论与传递导纳法相结合,建立简化的微穿孔板吸声结构的有限元仿真计算方法。基于阻抗管法材料吸声系数测试原理建立了吸声系数仿真实验模型,对微穿孔板结构的吸声系数进行了仿真计算,并与理论计算结果做了对比,说明了该简化方法的合理可行。同时,对金属和非金属材料的微穿孔板计算时温度传导系数的影响做了比较说明。     

三层微穿孔板的优化设计及特性分析

根据马大猷的微穿孔板理论,计算了三层微穿孔板的吸声系数.应用遗传算法对其结构参数进行了优化,并对其吸声特性进行了分析研究,与优化后的双层微穿孔板结构进行比较,结果表明:经过遗传算法优化后的三层微穿孔板在频域上能够获得更加饱满的吸声系数曲线,接近传统吸声材料的吸声性能.并且通过实验验证了优化设计的结果.     

微穿孔板几何参数估算及其对吸声性能的影响

不规则孔微穿孔板几何参数无法直接获知,造成吸声性能计算困难,故提出一种微穿孔板几何参数估算方法。将不规则孔等效处理为圆孔,利用马氏理论关于圆孔微穿孔板的基本理论,建立了微穿孔板几何参数估算模型;将参数估算结果用于吸声性能预测,理论计算与实验结果吻合。根据微穿孔板几何参数对高吸声性能区域的影响,探讨了马氏理论适用极限与微穿孔板几何参数的关系,以及微穿孔板受粉尘污染后吸声性能演变规律。将微穿孔板参数点取在面积较大的高吸声性能区域中间部位,可获得较大的马氏理论适用极限;微穿孔板参数点位于高吸声性能区域右上部位时,一定程度的粉尘污染不会降低吸声性能.      

内置谐振器的轻薄宽频吸声器结构设计与分析*

微穿孔板吸声器的吸声频带相较于亥姆霍兹谐振器更宽,但其低频吸声的实现需要较大的空气背腔,这对结构尺寸有限制的场合存在一定局限性。本文设计了一种轻薄吸声降噪结构(内置亥姆霍兹谐振器的微穿孔板吸声器,简称MPPHR),将微穿孔板吸声器与亥姆霍兹谐振器进行了结合,提升吸声器的低频吸声性能的同时兼具了微穿孔板宽带吸声的优点。首先基于微穿孔板和亥姆霍兹谐振器理论建立了等效电路模型并计算了结构的声阻抗。然后通过有限元对MPPHR的吸声特性进行了参数研究。最后验证了MPPHR的声阻抗模型和有限元仿真的准确性。研究结果表明：MPPHR结构拥有更宽吸声频带,厚度仅为30mm的MPPHR的半吸收频带可达1294Hz,相较于同等厚度下的微穿孔板吸声器宽近500Hz。此外,MPPHR拥有更好的低频吸声效率。     

扩散场内微穿孔板吸声特性的实验研究

在驻波管和混响场内对微穿孔板吸声结构做了吸声测量。同时在混响室对微穿孔板加吸声材料混合结构做了吸声测量。目的是了解微穿孔板在随机入射场或混响场内的吸声特性与垂直入射的关系。文中给出计算及测量结果,并说明了影响微穿孔板吸声结构特性的因素,以及在实际应用中的注意点。对今后要进行的工作提出了建议。     

面向微穿孔板吸声结构和吸声特性混合设计的软件平台

微穿孔板吸声结构是由微穿孔板与板后空腔组成的共振吸声结构,被认为是继多孔吸声材料之后发展起来的最有吸引力的吸声结构,其吸声特性与结构参数孔径d、板厚t、孔距b及空腔深度D有关,如何按需设计一个有效的微穿孔板吸声结构已成为目前研究的热点。本文从微穿孔板吸声结构和吸声特性混合设计的角度出发,使用面向对象的编程语言C++开发了微穿孔板吸声结构设计平台。与以往设计方法不同,本文开发的软件平台综合考虑了结构参数和吸声特性参数两方面的限制,根据实际应用要求平衡微穿孔板吸声结构的最大吸声系数与吸声带宽之间的制约关系,并以饱满的吸声曲线为目标,提供满足混合设计要求的优化结构参数。     

白光和红绿蓝光LED可调光源研制

为了提高LED光源色温和亮度的调节精度和准确度,结合色温由低向高变化时光色所呈现的渐变特点,提出了一种低色温白光LED灯珠、高色温白光LED灯珠加红绿蓝光LED灯珠补偿式调光的方法.将色温分成三个部分进行调节,每个部分选用不同的LED灯珠组合来进行调光.实验结果表明:不同组合情况下的LED光源的初始输出色温相对于目标值的偏差范围在1％以内;亮度可以在保证色温不变的情况下独立进行调节,初始输出值与目标值的偏差范围在1％以内;经过微调之后可以达到目标值;达到了色温和亮度独立调节的要求;光源发光稳定,不会因为长时间工作而影响调节精度.     

Visualization and interferometry for cylindrical and spherical sample tomography and profilometry

A technique combining image processing and laser interferometry for visualizing and detecting the deformation of transparent cylindrical and spherical sample is proposed. This deformation includes geometric deformation such as volume transition in profilometry and physical deformation such as refractive index change in tomography. Phase contour lines are used for quantitative analysis and graphical representation of the deformation. This method allows us to visually detect the spatial variation of the deformation field and to evaluate the test quality such as misalignment of optical system. A theoretical analysis using phase contour map to characterize the deformation field is described in detail. A method using phase contour map to qualify the interferometric test is proposed. Analysis of test examples is carried out. Suggestions on using phase contour line method to ameliorate test system design are finally discussed.     

Nonlocal potentials and their exact and approximate local and velocity-dependent equivalents

We show that good approximations to the exact equivalent local potential (ELP) and damping factor of a nonlocal Perey-Buck potential can be calculated in the partial wave WKB approximation of Horiuchi. The exact ELP and damping factor are obtained by means of a method previously given by one of us. We also confirm that an approximate ELP proposed by Bauhoff et al. is of comparable accuracy as the Horiuchi approximation. Thesel-dependent ELP's exhibit reduced attraction in the interior and provide a test for higher order WKB approximations. We subsequently obtain an equivalent velocity dependent potential (EVDP) which is even exactly wave function equivalent to the original nonlocal potential. This almost local potential, unlike the trivial equivalent local potential, is smooth and well-behaved and is therefore particularly useful in nuclear reactions where the off-shell behaviour of the potential is important.     

Quantum and Classical Disparity and Accord

Discrepancies and accords between quantum (QM) and classical mechanics (CM) related to expectation values and periods are generally found for both the harmonic oscillator (SHO) and a free particle in a box (FPB), which may apply generally. These indicate non-locality is expected throughout QM. The FPB energy states violate the Correspondence Principle. Previously unexpected accords are found and proven that 〈x ²〉 _CM =〈x ²〉 _QM and τ _CM =τ _QMb (beat period i.e. beats between the phases for adjoining energy states) for the SHO for all quantum numbers, n. However, for the FPB the beat periods differ at small n. It is shown that a particle’s velocity in an infinite square well varies, no matter how wide the box, nor how far the particle is from the walls. The quantum free particle variances share an indirect commonality with the Aharonov-Bohm and Aharonov-Casher effects in that there is a quantum action in the absence of a force. The concept of an “Expectation Value over a Partial Well Width” is introduced. This paper raises the question as to whether these inconsistencies are undetectable, or can be empirically ascertained. These inherent variances may need to be fixed, or nature is manifestly more non-classical than expected.     

Muonic and pionic L- and M-series in carbon and oxygen and the pionic 2p level shift and width of oxygen

Muonic and pionic X-rays of the L- and M-series in C and O have been measured with a Si(Li) detector in the energy range between 7 keV and 60 keV. The target consisted of mylar (C₅H₄O₂). Energies and intensities of 21 transitions have been determined. The strong interaction shift of the pionic 2p level in O was measured and found to be +4.1 ±2.3 eV. The measured width of this level is 11±6 eV. The measured yields have been compared with cascade calculations.     

Atomic and electronic structures and stability of icosahedral nanodiamonds and onions

The relative stability of alternative carbon nanoparticles with icosahedral symmetry, such as diamond-like nanocrystallites and multiwalled fullerenes (onions), is investigated using the parametric model and the density functional tight-binding (DFTB) method. It is demonstrated that an increase in the size of particles and their hydrogenation favor the stabilization of diamond-like nanocrystallites. The formation of “intermediate” nanostructures consisting of diamond-like nanocrystallites inside the fullerene cage is revealed. The electronic spectra of icosahedral carbon nanoparticles are calculated.