LD泵浦的声光调Q高重复率Nd∶GdVO_4激光器

报道了利用LD泵浦、1.0 6 μm声光调Q准连续Nd∶GdVO4 激光器的输出特性 当泵浦功率为 4 .15W ,重复率为 4 0kHz时 ,获得的最大平均输出功率为 1.4 6W ,光 光转换效率为 35 .1% ,斜效率为 4 4.2 % 在重复率为 10kHz时 ,获得了最短脉宽 2 4ns ,最大单脉冲能量为 6 3.2 μJ ,相应峰值功率为 2 .6 2kW     

LD抽运Nd:GdVO4的激光性能研究

利用LD端泵NdGdVO4晶体,实现了激光器的1 063 nm连续和调Q激光输出.在连续激光输出实验中,在泵浦功率为20.2 W时,得到最高的光-光转换效率为55.0%,斜效率为59.1%,此时输出功率为11.5 W;在泵浦功率为33.7 W时,得到16.7 W的最大激光输出.在调Q实验中,当重复频率为10 kHz时,获得脉宽6.5 ns,能量340 μJ,峰值功率52.3 kW.当重复频率为30 kHz时,获得脉宽14.5 ns,平均输出功率5.18 W,峰值功率11.9 kW.     

激光二极管泵浦Nd:YVO4/YVO4复合晶体绿光激光器

采用一种新型的Nd:YVO4/YVO4复合晶体,利用V型折叠腔,研究了高功率激光二极管端面泵浦的Nd:YVO4/YVO4复合晶体激光器基频1.06 μm及倍频532 nm激光的输出特性.当泵浦功率为24.6 W时,获得1.06 μm激光的最大输出功率为11.7 W,光-光转换效率为48%.当泵浦功率为17 W时,获得了5.32 W的绿光输出,光-光转换效率达到31.3%.     

激光二极管泵浦Nd∶YVO4/YVO4复合晶体绿光激光器

采用一种新型的Nd∶YVO4/YVO4复合晶体,利用V型折叠腔,研究了高功率激光二极管端面泵浦的Nd∶YVO4/YVO4复合晶体激光器基频1.06 μm及倍频532 nm激光的输出特性.当泵浦功率为24.6 W时,获得1.06 pm激光的最大输出功率为11.7 W,光-光转换效率为48%.当泵浦功率为17 W时,获得了5.32 W的绿光输出,光-光转换效率达到31.3%.     

AlGaInAs半导体饱和吸收体调Q特性的理论与实验研究

利用通过金属化学气相沉积法长成的AlGaInAs饱和吸收体,对808nmLD泵浦的Nd∶YVO4键合晶体进行被动调Q,获得了波长为1.06μm的激光脉冲,测量了脉冲能量、脉冲宽度、脉冲重复率随泵浦功率的变化.当泵浦功率为10.57W时,激光平均输出功率为3.45W,斜效率为39%,重复频率达到最大值101kHz.当泵浦功率为8.07W时,脉冲宽度达到最小值1.76ns.利用速率方程对该激光器进行理论分析,计算出输出脉冲能量、峰值功率、脉冲宽度和重复频率的理论值,实验结果和理论结果基本一致.     

高效率内腔式2 μm简并光学参量振荡器

报道了一种高效率的2 μm光学参量振荡器. 利用1.064 μm声光调Q Nd:YVO₄激光器抽运基于氧化镁掺杂周期性极化铌酸锂的内腔式光学参量振荡器, 在简并状态实现了稳定高效的2 μm激光输出. 当808 nm激光二极管抽运功率为20 W, Q开关工作频率为15 kHz时, 产生了平均功率为3.5 W、脉冲宽度为1.4 ns的2 μm激光, 光-光转换效率为17.5%, 斜效率为25%. 据我们所知, 该转换效率在2 μm波段内腔式光学参量振荡器中是最高的.     

LD侧面抽运Nd∶YAG多波长激光器

利用单根Nd∶YAG晶体棒,实现1 064 nm和1 319 nm双波长基频光振荡及其倍频光532 nm、660 nm激光的输出.采用LD侧面抽运单根Nd∶YAG晶体棒实现1 064 nm和1 319 nm基频光振荡,在此基础上使用非线性频率变换技术获得532 nm和660 nm倍频光的输出.结果表明:1 064 nm和1 319 nm基频激光同时输出时功率分别为30.5 W和8.78 W,单独输出时功率分别为35.6 W和11.2 W|在声光调Q频率分别为10.5 kHz和20.5 kHz时,获得了功率分别为5.34 W和1.353 W的532 nm激光和660 nm激光两路同时运转输出、功率分别为6.72 W和1.902 W各路单独输出,两种情况下倍频转换效率均为17.5%和15.4%,不稳定度小于2%.     

LD侧面抽运Nd∶YAG多波长激光器

利用单根Nd∶YAG晶体棒,实现1064nm和1319nm双波长基频光振荡及其倍频光532nm、660nm激光的输出.采用LD侧面抽运单根Nd∶YAG晶体棒实现1064nm和1319nm基频光振荡,在此基础上使用非线性频率变换技术获得532nm和660nm倍频光的输出.结果表明:1064nm和1319nm基频激光同时输出时功率分别为30.5W和8.78W,单独输出时功率分别为35.6W和11.2W;在声光调Q频率分别为10.5kHz和20.5kHz时,获得了功率分别为5.34W和1.353W的532nm激光和660nm激光两路同时运转输出、功率分别为6.72W和1.902W各路单独输出,两种情况下倍频转换效率均为17.5%和15.4%,不稳定度小于2%.     

基于金纳米笼的1106 nm被动调Q Nd:GAGG激光器

成功制备了金纳米笼溶液并将其作为饱和吸收体,实现了中心波长为1106 nm的Nd:GAGG激光器的调Q运转。在输出镜透过率为3%的激光器中,在泵浦功率6.70 W下获得的最大平均输出功率为98 mW,此时对应的脉冲重复率为206 kHz,最短脉冲宽度为436 ns;在输出镜透过率为7%的激光器中,当泵浦功率为7.69 W时,得到的最大平均输出功率为121 mW,最短脉冲宽度为370 ns,对应的脉冲重复率为170 kHz。实验结果证明了金纳米笼在近红外波段激光器中用作饱和吸收体的巨大潜力。     

1.2 W中红外ZnGeP2光参量振荡器

报导了利用Tm,Ho:GdVO4激光器抽运双谐振ZnGeP2光参量振荡器实验研究.Tm(5%),Ho(0.5%):GdVO4晶体采用液氮制冷方式,工作在77 K温度条件下.以25 W波长为800 nm的光纤耦合激光二极管抽运,2 μm激光最大平均功率7 W,脉冲宽度小于30 ns, 脉冲重复频率5 kHz到20 kHz可调.非线性频率转换晶体ZnGeP2长15 mm,55?切割,OPO谐振腔为平平腔,腔长约25 mm.在5W的2 μm激光抽运下,脉冲重复频率10 kHz,实现了信号光3.7 μm及闲频光4.5 μm中红外激光输出,参量光脉冲宽度为15～17 ns,最大平均功率大于1.2 W,光-光转换效率为20%.测量参量光输出光束全宽度远场发散角4 mrad,光束质量M2因子小于3.     

High repetition rate,high peak power acousto-optical Q-switched 946 nm Nd:YAG laser

A diode-end-pumped high repetition rate, high peak power acousto-optical (AO) Q-switched 946 nm Nd:YAG laser was demonstrated in this paper. In our experiments, a 20 mm miniature acousto-optical Q-switch was employed in a 45 mm linear laser cavity for generating the short laser pulse. At a repetition rate of 10 kHz, a maximum average output power of 2.9 W was achieved with a pulse width of 24.4 ns, giving a peak power of 11.9 kW. To the best of our knowledge, this is the highest peak power 946 nm Nd:YAG laser at high repetition rate operation. Moreover, pulse train with good stability was also obtained at the repetition rate of 50 kHz. At an incident pump power of 22.3 W, up to an average output power of 3.5 W pulsed 946 nm laser was generated at 50 kHz with a pulse width of 69 ns, corresponding to an optical conversion efficiency of 15.7% and an average slope efficiency of 24.1%, respectively.     

高效三倍频全固态Nd∶YAG/LBO紫外激光器

报道了一种侧面泵浦Nd∶YAG、声光调Q、LBO晶体腔外倍频和三倍频的355 nm准连续波紫外激光器.采用结构简单、紧凑的平-凹腔设计,在152 W的泵浦功率下,重复频率5 kHz时,获得平均功率1.62 W的355 nm TEM00模激光输出,三倍频的转换效率为25%;重复频率1 kHz时,获得平均功率518 mW、单脉冲能量518 μJ、脉宽17 ns、峰值功率高达30 kW的紫外激光输出.     

LD端面泵浦声光调QNd:YVO_4/KTA 1.53μm光学参量振荡激光器

介绍了一台连续激光二极管(LD)端面泵浦声光调Q的高重复频率、高效率1.53μm人眼安全光学参量振荡激光器。激光基质材料采用Nd:YVO4晶体,采用按Ⅱ类非临界相位匹配切割、长20 mm的KTA晶体作为非线性光学晶体。在LD泵浦功率13.7 W,声光调Q重复频率60 kHz时,获得最高平均功率2.6 W的1.53μm信号光输出,泵浦光-信号光转换效率达到19%。在最高输出功率2.6 W下测得单脉冲宽度2.9 ns,对应的单脉冲能量和峰值功率分别为43.3μJ和15 kW。     

激光二极管抽运Tm,Ho∶YLF晶体声光调Q激光器

对激光二极管端面抽运Tm,Ho∶YLF晶体声光调Q激光器的激光特性进行了研究。根据粒子跃迁和能量传递过程,在考虑能级传递上转换的前提下,建立了Tm,Ho∶YLF脉冲激光器的速率方程,得到了初始反转粒子数的解析表达式,分析了能量传递上转换效应对激光上能级反转粒子数的影响。在室温下实现了2 μm波长激光的脉冲输出。实验上给出并分析了Tm,Ho∶YLF脉冲激光器的平均输出功率、单脉冲能量和脉冲宽度随抽运功率以及声光Q开关调制频率的变化关系。在抽运功率为2.8 W,重复频率为9 kHz时,获得了平均输出功率为189 mW的激光脉冲,光光转换效率为6.8%。在重复频率为1 kHz时,得到最大单脉冲能量为65 μJ,峰值功率为0.17 kW。     

Compact and efficient diode-pumped actively Q-switched 1319 nm Nd:YAG ceramic laser

An efficient compact diode-pumped acousto-optic actively Q-switched Nd:YAG ceramic laser operating at 1319 nm was demonstrated. At an incident pump power of 23.7 W, an average output power of 4.8 W at a pulse repetition frequency of 30 kHz was obtained. The corresponding optical-to-optical conversion efficiency was 20.3%. A maximum single pulse energy of 316 μJ with a pulse duration of 78.5 ns was obtained at an incident pump power of 19.4 W and a pulse repetition frequency of 10 kHz.     

二极管泵浦的2 μm高重复频率脉冲固体激光器

 报道了连续二极管端面泵浦2 μm高重复频率Tm,Ho:YLF激光器的实验研究结果。792 nm光纤耦合激光二极管作泵浦源，泵浦液氮制冷的Tm,Ho:YLF晶体。动态运转时，平均输出功率达到4 W，相应的能量抽取效率大于85%。采用声光调Q方式，重复频率1～50 kHz可调，10 kHz时，峰值功率达到12 kW，最小脉宽为32 ns。同时，还对二极管泵浦2 μm激光器设计中的各种因素进行了分析。     

LD-pumped actively Q-switched Yb:YAG laser with an acoustic-optical modulator

We have investigated an acoustic-optical Q-switched Yb:YAG laser end-pumped by a fiber-coupled laser diode. At room temperature, the 1030-nm wavelength pulsed output is realized. When the incident power was 11.3 W, a maximum average output power of 1.034 W is achieved at the repetition frequency of 20 kHz, and this corresponds to an optical conversion efficiency of 9.1%. The shortest laser pulse width of 37.4 ns was observed at the repetition frequency of 5 kHz, when the incident power was 11.3 W. The highest peak power 6.79 kW was achieved at the repetition frequency of 1.12 kHz, when the incident power was 8.7 W. The highest single-pulse energy of 319.67 μJ was achieved at the repetition frequency of 1.12 kHz, when the incident power was 10.14 W.     

100 W全光纤声光调Q光纤激光器实验研究

 报道了一台全光纤结构主振荡功率放大(MOPA)型掺镱脉冲光纤激光器,以光纤光栅为腔镜,光纤型声光调Q的光纤激光器为种子源,通过两级掺镱双包层光纤放大器实现功率放大。对声光调Q的光纤激光器输出特性进行了研究,比较了不同泵浦波长、不同重复频率对激光输出功率和脉冲宽度的影响,并实现了最短脉冲宽度25 ns、单脉冲能量45 μJ的脉冲激光输出。在重复频率50 kHz时,对脉冲宽度130 ns、平均功率0.6 W的种子光进行放大,得到了平均功率102.5 W、脉冲宽度约240 ns的激光输出。     

AlGaInAs半导体饱和吸收体调Q特性的理论与实验研究究

利用通过金属化学气相沉积法长成的AlGaInAs饱和吸收体,对808 nm LD泵浦的Nd:YVO₄键合晶体进行被动调Q，获得了波长为1.06 mm的激光脉冲，测量了脉冲能量、脉冲宽度、脉冲重复率随泵浦功率的变化。当泵浦功率为10.57 W时，激光平均输出功率为3.45 W，斜效率为39 %，重复频率达到最大值101 kHz。当泵浦功率为8.07 W时，脉冲宽度达到最小值1.76 ns。利用速率方程对该激光器进行理论分析，计算出输出脉冲能量、峰值功率、脉冲宽度和重复频率的理论值，实验结果和理论结果基本一致。     

High-power high-repetition-rate acousto-optically Q-switched 1342 nm laser

A high-power high-repetition-rate acousto-optically Q-switched 1342 nm laser with double Nd:YVO₄ crystals pumped by fiber-coupled laser diodes is presented. The highest output power of 13.7 W was achieved with a total of 42 W pumping power in cw operation, the slope efficiency was measured as 36%, and the optical efficiency was better than 32%. In Q-switchedoperation, the highest pulse repetition rate of 100 kHz was obtained. At 50 kHz repetition rate, the laser exported 11.2 W average output power, with 60 ns average pulse width, ∼5% width stability (RMS) and ∼8% peak-power stability (RMS). At 10 kHz repetition rate, the highest average output power was measured as 6.3 W, single pulse energy was calculated as 0.63 mJ, with pulse width of 19 ns and peak-power higher than 30 kW. Combining the experimental results, we analyze and discuss some problems concerning Nd:YVO₄ crystal working at 1,342 nm wavelength. PACS 42.55.-f; 42.55.Xi; 42.60.Gd