首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到10条相似文献,搜索用时 109 毫秒
1.
Much of the research on sound transmission through the aircraft fuselage into the interior of aircraft has considered coupling of the entire cylinder to the acoustic modes of the enclosure. Yet, much of the work on structural acoustic control of sound radiation has focused on reducing sound radiation from individual panels into an acoustic space. Research by the authors seeks to bridge this gap by considering the transmission of sound from individual panels on the fuselage to the interior of the aircraft. As part of this research, an analytical model of a curved panel, with attached piezoelectric actuators, subjected to a static pressure load was previously developed. In the present work, the analytical model is extended to consider the coupling of a curved panel to the interior acoustics of a rigid-walled cylinder. Insight gained from an accurate analytical model of the dynamics of the noise transmission from the curved panels of the fuselage into the cylindrical enclosure of an aircraft is essential to the development of feedback control systems for the control of stochastic inputs, such as turbulent boundary layer excitation. The criteria for maximal structural acoustic coupling between the modes of the curved panel and the modes of the cylindrical enclosure are studied. For panels with aspect ratios typical of those found in aircraft, results indicate that predominately axial structural modes couple most efficiently to the acoustic modes of the enclosure. The effects of the position of the curved panel on the cylinder are also studied. Structural acoustic coupling is found to not be significantly affected by varying panel position. The impact of the findings of this study on structural acoustic control design is discussed.  相似文献   

2.
钱治文  商德江  孙启航  何元安  翟京生 《物理学报》2019,68(2):24301-024301
利用多物理场耦合有限元法对结构和流体适应性强、抛物方程声场计算高效准确的特点,提出了三维浅海波导下弹性结构声振特性研究的有限元-抛物方程法.该方法采用多物理场耦合有限元理论建立浅海下结构近场声辐射模型,计算局域波导下结构声振信息,并提取深度方向上复声压值作为抛物方程初始值;然后采用隐式差分法求解抛物方程以步进计算结构辐射声场.重点介绍了该方法对浅海下结构声辐射计算的准确性、高效性以及快速收敛性后,对Pekeris波导中有限长弹性圆柱壳的声振特性进行了分析.研究得出,当圆柱壳靠近海面(海底)时,其耦合频率比自由场下的要高(低),当潜深达到一定范围时,与自由场耦合频率基本趋于一致;在低频远场,结构辐射场与同强度点源声场具有一定的等效性,且等效距离随着频率增加而增加;由于辐射声场受结构振动模态、几何尺寸和简正波模式影响,结构辐射场传播的衰减规律按近场声影响区、球面波衰减区、介于球面波和柱面波衰减区、柱面波衰减区四个扩展区依次进行.  相似文献   

3.
The outer cavity Janus-Helmholtz with sound insulation layer is presented for obtaining the capacity of high-power non-directional transmitting. The radiation efficiency and directivity in the 0 degrees direction can be improved when the radiation mode is changed by laying sound insulation layer. The operating bandwidth can be expanded effectively by the dual mode coupling between the cavity vibration and longitudinal vibration of Janus transducer. A prototype is designed by finite element method. Test results show that the results are in good agreement with the design results. Compared with inner cavity Janus-Helmholtz transducer,acoustic radiation performance of outer cavity Janus-Helmholtz underwater acoustic transducer in the 0 degrees direction has been significantly improved.  相似文献   

4.
外液腔式Janus-Helmholtz水声换能器   总被引:2,自引:1,他引:2       下载免费PDF全文
桑永杰  蓝宇  吴彤  丁玥文 《声学学报》2017,42(4):397-402
为获得具有大功率无指向性发射特性的水声换能器,提出了一种外液腔式Janus-Helmholtz结构。通过设置隔声层改变换能器的声辐射模式,从而改善声辐射效率和无指向性方向的声辐射能力,并利用外液腔振动和Janus换能器纵向振动耦合实现宽带发射。基于有限元法设计了一只工作频段为1.1~3.5 kHz的外液腔式Janus-Helmholtz换能器试验样机。样机测试结果显示与设计结果符合得较好,与内液腔式相比,外液腔式Janus-Helmholtz水声换能器在0°方向的声辐射能力得到了显著改善。   相似文献   

5.
Underwater noise radiated from offshore pile driving got much attention in recent years due to its threat to the marine environment. This study develops a three-dimensional semi-analytical method, in which the pile is modeled as an elastic thin cylindrical shell, to predict vibration and underwater acoustic radiation caused by hammer impact. The cylindrical shell, subject to the Reissner–Naghdi’s thin shell theory, is decomposed uniformly into shell segments whose motion is governed by a variational equation. The sound pressures in both exterior and interior fluid fields are expanded as analytical functions in frequency domain. The soil is modeled as uncoupled springs and dashpots distributed in three directions. The sound propagation characteristics are investigated based on the dispersion curves. The case study of a model subject to a non-axisymmetric force demonstrates that the radiated sound pressure has dependence on circumferential angle. The case study including an anvil shows that the presence of the anvil tends to lower the frequencies and the amplitudes of the peaks of sound pressure spectrum. A comparison to the measured data shows that the model is capable of predicting the pile driving noise quantitatively. This mechanical model can be used to predict underwater noise of piling and explore potential noise reduction measures to protect marine animals.  相似文献   

6.
This paper presents an analytical model for acoustic transmission characteristics of a cylindrical cavity system representing the acoustic resonance conditions of a Korean bell. The cylindrical cavity system consists of an internal cavity, a gap, an auxiliary cavity, and a rigid base. Since the internal cavity is connected to the external field through a gap, determination of the acoustic transmission characteristics becomes a coupling problem between the internal cavity and external field. The acoustic field of the internal cavity is considered by expanding the solution method of the mixed boundary problem, and the external field is addressed by modifying the radiation impedance model of a finite cylinder. The analytical model is validated by comparison with both experiment and a boundary element method. Using the analytical model, the resonance conditions are determined to maximize the resonance effect. Thus, the resonance frequencies of the bell cavity system are investigated according to the gap size and auxiliary cavity depth. By adjusting gap size or auxiliary cavity depth, the cavity resonance frequency is tuned to resonate partial tones of the bell sound. Finally, the optimal combination of gap size and auxiliary cavity depth is determined.  相似文献   

7.
This work presents a theoretical study of the sound transmission into a finite cylinder under coupled structural and acoustic vibration. Particular attention of this study is focused on evaluating a dimensionless quantity, "noise reduction," for characterizing noise transmission into a small cylindrical enclosure. An analytical expression of the exterior sound pressure resulting from an oblique plane wave impinging upon the cylindrical shell is first presented, which is approximated from the exterior sound pressure for an infinite cylindrical structure. Next, the analytical solution of the interior sound pressure is computed using modal-interaction theory for the coupled structural acoustic system. These results are then used to derive the analytical formula for the noise reduction. Finally, the model is used to predict and characterize the sound transmission into a ChamberCore cylindrical structure, and the results are compared with experimental data. The effects of incidence angle and internal acoustic damping on the sound transmission into the cylinder are also parametrically studied.  相似文献   

8.
A method is presented for calculating the far field sound radiation from a shallow spherical shell in an acoustic medium. The shell has a concentrated ring mass boundary condition at its perimeter representing a loudspeaker voice coil and is excited by a concentrated ring force exerted by the end of the voice coil. A Green's function is developed for a shallow spherical shell, which is based upon Reissner's solution to the shell wave equation [Q. Appl. Math. 13, 279-290 (1955)]. The shell is then coupled to the surrounding acoustic medium using an eigenfunction expansion, with unknown coefficients, for its deflection. The resulting surface pressure distribution is solved using the King integral together with the free space Green's function in cylindrical coordinates. In order to eliminate the need for numerical integration, the radiation (coupling) integrals are solved analytically to yield fast converging expansions. Hence, a set of simultaneous equations is obtained which is solved for the coefficients of the eigenfunction expansion. These coefficients are finally used in formulas for the far field sound radiation.  相似文献   

9.
Acoustic signature of a submarine hull under harmonic excitation   总被引:2,自引:0,他引:2  
The structural and acoustic responses of a submarine under harmonic force excitation are presented. The submarine hull is modelled as a cylindrical shell with internal bulkheads and ring stiffeners. The cylindrical shell is closed by truncated conical shells, which in turn are closed at each end using circular plates. The entire structure is submerged in a heavy fluid medium. The structural responses of the submerged vessel are calculated by solving the cylindrical shell equations of motion using a wave approach and the conical shell equations with a power series solution. The far-field radiated sound pressure is then calculated by means of the Helmholtz integral. The contribution of the conical end closures on the radiated sound pressure for the lowest circumferential mode numbers is clearly observed. Results from the analytical model are compared with computational results from a fully coupled finite element/boundary element model.  相似文献   

10.
The finite element method is applied to an elastic shell which is vibrating to generate acoustic radiation. A vibrating shell of revolution backed by an enclosure in its rear side is to radiate sound waves into a semi-infinite space in front. As a numerical example, some characteristics of a direct radiator type loudspeaker model are calculated and discussed. The driving point impedance and the far field sound pressure frequency characteristics are shown, together with the effects of the radiation and the enclosure.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号