基于掺铒光子晶体光纤超荧光光源的实验研究

为了改进传统掺铒光纤超荧光光源的输出稳定性,提出基于掺铒光子晶体光纤的超荧光光源。构建了单程后向结构掺铒光子晶体光纤超荧光光源,研究了这种新型光源的输出特性。分析了掺铒光子晶平均波长体光纤长度和抽运功率对光源输出功率、光谱谱宽和平均波长的影响。结果表明,通过优化选取光纤长度28m和抽运功率220mW,获得了单程后向结构超荧光光源输出如下:输出功率45.74mW、光-光转换效率20.79%、谱宽31.5nm和平均波长1548.003nm。该实验结果为进一步研究掺铒光子晶体光纤超荧光光源在不同环境下的稳定性奠定了基础。     

光纤陀螺用掺铒超荧光光纤光源输出特性研究

介绍了掺铒超荧光光纤光源(SFS)的基本原理和SFS各种基本结构的特点。结合实际应用选择了单程后向(SPB) SFS作为光纤陀螺用光源。理论分析了影响单程后向掺铒超荧光光纤光源输出特性的各种因素。通过实验分析了铒纤长度对单程后向掺铒光纤光源泵浦效率和输出光谱的影响，特别是对中心波长稳定性的影响，对于单程后向结构掺铒光纤光源来说，铒纤长度有一个最佳值。演示了铒纤在选择最佳长度的情况下，泵浦功率对输出谱型的影响。通过实验分析了-40℃～60℃之间光源输出光谱和输出光功率的温度稳定性。最终得到了适用于惯导级光纤陀螺的光源。     

新型三段高性能的长波段掺铒光纤超荧光光源的研究

提出了一种第一段无泵浦、第二段前向泵浦和第三段后向泵浦的三段级联掺铒光纤超荧光光纤光源的新结构.数值分析了泵浦光波长、铒光纤长度以及泵浦比例对新结构性能的影响.结果表明可以找到一组适合制作成本低廉、输出功率高、谱平坦的长波段掺铒光纤超荧光光源.     

高稳定宽频带掺铒光纤超荧光光源

理论研究了双程后向结构掺铒光纤超荧光光源的特性。结果表明 ,在任意反射镜参数下 ,只要选取适当的掺铒光纤长度 ,该结构光源总能实现不依赖于抽运功率的平均波长高稳定性运行 ;在光源高稳定性的前提下 ,反射镜参数优化后的该结构光源具有较宽的频带宽度和较高的抽运效率     

高稳定宽频带掺饵光纤超荧光光源

理论研究了双程后向结构掺铒光纤超荧光光源的特性。结果表明，在任意反射镜参数下，只有选取适当的掺铒光纤长度，该结构光源总能实现不依赖于抽运动率的平均波长高稳定性运动行；在光源稳定性的前提下，反射镜参数优化后的该结构光源具有较宽的频带宽度和较高的抽运效率。     

铒纤长度对掺铒光源性能影响的实验研究

实验演示了铒纤长度的选择对1550 nm双通后向超荧光掺铒光纤光源(DPB SFS)的平均波长以及谱宽性能的影响,特别是对平均波长稳定性的影响,实验分析了－20℃~60℃之间光源固有平均波长的变化,最终得到了铒纤固有热系数以及整个样机的平均波长稳定性随铒纤长度变化的实验曲线,对超荧光掺铒光纤光源的器件选择和优化设计具有重要参考价值.     

新颖的高功率L-波段掺铒光纤超荧光光源

研究了L-波段超荧光在光纤中的产生机理,设计了一种带光纤圈反射器的双级双程前向输出L-波段光源结构,通过对两级采用掺铒浓度不同的光纤并优化其长度及两级泵浦光功率,实验中获得了功率高达19.86mW(12.98dBm)、中心波长为1577.421nm的L-波段(1555-1620nm)超荧光光源。实现了低浓度掺铒光纤起诱导光及改善光谱的作用,高浓度光纤为主要发光源,采用光纤圈反射器提高了泵浦光的利用效率、光源的平坦度及稳定性。同时分析了结构中各个参量对光源各方面性能的影响,对光源的设计具有指导意义。     

双程前向近高斯型掺铒超荧光光纤光源的实验研究

研究了输出谱型为近高斯型的掺铒超荧光光纤光源,分析了高斯型光谱的自相干函数和影响平均波长稳定性的因素.采用双程前向光源结构,通过选择铒纤长度获得高斯型光谱输出,同时调节泵浦功率来优化铒纤的本征温度系数对光源的影响,得到铒纤长度10.05 m,泵浦功率为172 mW时,整体光路（除半导体泵浦激光器及其驱动电源）在全温－40 ℃~60 ℃测试条件下平均波长稳定性为66.651 ppm的近高斯型掺铒光纤光源.     

铒纤长度对单程掺铒光源输出特性的影响

 分析铒纤长度对掺铒光源输出特性的影响对于光源的优化设计有重要意义。实验分析了铒纤长度对单程前向和后向掺铒光纤光源(SFS)输出特性的影响。分析了铒纤长度与单程SFS输出光功率的关系,以及铒纤长度对单程SFS输出光谱宽度及中心波长的影响。找到了最佳铒纤长度的范围,对单程掺铒光纤光源的器件选择及性能优化有重要的参考价值。     

一种高效率的L波段掺铒光纤ASE宽带光源

利用双程双向泵浦单级掺铒光纤的结构实现高效率的L波段掺铒光纤放大自发辐射输出，同时选择1480nm半导体激光器作为泵浦源，高掺杂铒光纤为增益介质，通过优化铒光纤长度，获得了在1566-1604 nm（38 nm），自发辐射谱功率高于－16 dBm，总输出功率13.7 dBm的L波段掺铒光纤放大自发辐射光源.该光源结构相比于双程前向泵浦结构的L波段掺铒光纤放大自发辐射光源，其泵浦效率从11.8%提高到23.4%.     

边界扫描测试在数字电路自动测试系统中的研究与应用[BT)]

边界扫描测试是当前数字电路模块故障隔离的主要手段,但测试能力受到模块可测试性设计限制,其它方面作用也被忽略。文中对数字电路自动测试系统设计提出了边界扫描测试应用技术,包括系统自检测试,模块功能测试和模块故障隔离。在系统自检测试中应用边界扫描,提高了设备自检故障隔离精度;而对于模块功能测试,边界扫描测试技术提供了一种新的选择;在故障隔离中扩展和延伸应用边界扫描技术,突破了模块自身测试性的限制,提高了边界扫描测试的故障覆盖率和故障隔离精度。通过实际测试验证表明,该设计方法稳定可靠,同时提升了测试系统自身和模块的测试能力和隔离精度。     

Normal modes and quality factors of spherical dielectric resonators: I — shielded dielectric sphere

Electromagnetic theoretic analysis of shielded homogeneous and isotropic dielectric spheres has been made. Characteristic equations for the TE and TM modes have been derived. Dielectric spheres of radii of the order of μm size are found suitable for the optical frequency region whereas for the microwave region radii of the order of mm size are found suitable. Parameters suitable for their application in the optical and microwave frequency ranges have been used to compute the frequencies corresponding to the normal modes for the TE and TM modes. Expressions for the quality factors for realistic resonators, i.e., for a dielectric sphere with a non-zero conductivity and a metal shield with a finite conductivity have also been derived for the TE and TM modes. Computations of the quality factors have been made for resonators with parameters suitable for the optical and the microwave regions.     

Optimisation of damping treatments based on big bang–big crunch and modal strain energy methods

A cost-effective methodology is needed in various applications in order to optimise damping treatments for structures. Although some methods appear to be applicable for structures with relatively simple geometries, it is still difficult to utilise them for general structures. This paper presents an efficient approach for optimisation of passive damping treatments that can be applied to general structures. First, an optimisation procedure based on big bang–big crunch optimisation method is introduced and its effectiveness for damping optimisation is evaluated. Then, a procedure based on modal strain energy method is presented for the prediction of modal damping levels for structures with damping treatments and its performance is assessed. After that, for validation purposes, the proposed optimisation methodology is used to maximise modal damping for a single mode of a structure whose optimised configurations are known for the individual modes. Finally, the performance of the proposed optimisation procedure is demonstrated for the maximisation of damping levels for multiple modes at the same time and the applicability of the approach for general structures with passive damping treatments is demonstrated.     

Application of the Scherer-Blume theory to the intermediate ionization regime

Blume's formula for the time-differential attenuation coefficients for the hyperfine perturbation of ions recoiling in gas is rewritten in a form convenient for numerical solution when the number of precession frequencies is large. Asymptotic expressions for the behaviour of the solutions for very short, and very long correlation time are given. Approximate condition for the existence of a minimum in the pressure dependence of the time differential coefficients, as well as the position and depth of such a minimum, are also derived, and compared with the results of calculations for various physical systems.Supported in part by the Israel Commission for Basic Research.     

Surface plasma waves in silver and gold

The dispersion curves for surface plasma waves (SPW) in Ag have been determined from calculated reflectivity minima as exhibited by attenuated total reflection (ATR spectra) for the prism-air-metal (PAM) configuration and from the direct calculation of the dispersion relation for the same configuration. The dispersion curves for Au have been determined by measuring the ATR spectra for the prism-dielectric-metal (PDM) configuration, by calculating the ATR spectra from published optical constants and from the direct calculation of the despersion relation for the PDM configuration. We have found two general types of solutions from the direct calculation of the dispersion relation for both configurations. The two solutions are the surface or Brewster modes and the virtual modes. The characteristics of both modes are discussed. The effect of electronic damping upon the dispersion curves for Ag which exhibits low electronic damping and Au which exhibits moderate electronic damping is demonstrated. Finally the perturbing effect of the dielectric (referred herein as dielectric shift) upon the displacement of the dispersion curves to higher wave number for the PAM configuration for Ag and for the PDM configuration for Au is shown.     

Structural and Thermodynamic Peculiarities of Core-Shell Particles at Fluid Interfaces from Triangular Lattice Models

A triangular lattice model for pattern formation by core-shell particles at fluid interfaces is introduced and studied for the particle to core diameter ratio equal to 3. Repulsion for overlapping shells and attraction at larger distances due to capillary forces are assumed. Ground states and thermodynamic properties are determined analytically and by Monte Carlo simulations for soft outer- and stiffer inner shells, with different decay rates of the interparticle repulsion. We find that thermodynamic properties are qualitatively the same for slow and for fast decay of the repulsive potential, but the ordered phases are stable for temperature ranges, depending strongly on the shape of the repulsive potential. More importantly, there are two types of patterns formed for fixed chemical potential—one for a slow and another one for a fast decay of the repulsion at small distances. In the first case, two different patterns—for example clusters or stripes—occur with the same probability for some range of the chemical potential. For a fixed concentration, an interface is formed between two ordered phases with the closest concentration, and the surface tension takes the same value for all stable interfaces. In the case of degeneracy, a stable interface cannot be formed for one out of four combinations of the coexisting phases, because of a larger surface tension. Our results show that by tuning the architecture of a thick polymeric shell, many different patterns can be obtained for a sufficiently low temperature.     

Magnetoreflection studies of graphite intercalation compounds

Magnetoreflection spectra are presented for the first time for donor graphite intercalation compounds and for acceptor compounds of low stage. Analysis of these spectra yields values for the K-point effective masses for the conduction and valence bands. Shifts in Fermi level are determined and a breakdown in selection rules for K-point transitions is reported.     

Effects of the use of personal music players on amplitude modulation detection and frequency discrimination

Measures of auditory performance were compared for an experimental group who listened regularly to music via personal music players (PMP) and a control group who did not. Absolute thresholds were similar for the two groups for frequencies up to 2 kHz, but the experimental group had slightly but significantly higher thresholds at higher frequencies. Thresholds for the frequency discrimination of pure tones were measured for a sensation level (SL) of 20 dB and center frequencies of 0.25, 0.5, 1, 2, 3, 4, 5, 6, and 8 kHz. Thresholds were significantly higher (worse) for the experimental than for the control group for frequencies from 3 to 8 kHz, but not for lower frequencies. Thresholds for detecting sinusoidal amplitude modulation (AM) were measured for SLs of 10 and 20 dB, using four carrier frequencies 0.5, 3, 4, and 6 kHz, and three modulation frequencies 4, 16, and 50 Hz. Thresholds were significantly lower (better) for the experimental than for the control group for the 4- and 6-kHz carriers, but not for the other carriers. It is concluded that listening to music via PMP can have subtle effects on frequency discrimination and AM detection.