脉冲梯度场增强的DQF-COSY实验t1噪声研究

脉冲相位的不稳定性是导致二维谱中的t₁噪声的原因之一.本文从理论上和实验上对脉冲相位不稳定性所引起的t₁噪声进行了研究.从角动量算符I_x,I_y和I_z推导中发现,由于磁化矢量在P型和N型DQF-COSY实验的脉冲梯度场中进动方向的内在差异,一部分脉冲相位误差在P型DQF-COSY实验会被重聚掉,在N型DQF-COSY实验中却会被加重.因此P型DQF-COSY实验的t₁噪声比N型小.理论推导还得到t₁噪声在P型和N型中的理论比值为√3:√11.以上理论结果得到我们实验结果的支持.     

利用相位步进脉冲消除探头13C NMR背景信号

由静态探头线圈外有机材料产生的¹³C NMR背景信号强度大，化学位移范围广（δ_C 20~250），此背景信号在交叉极化实验中还可被增强，并随着样品信号的累积而累积，严重影响谱图分析.将相位步进脉冲引入交叉极化实验（称为PIPCP）中可以有效去除经交叉极化增强的¹³C NMR背景信号，但样品信号不受影响.这是由于经过相位步进脉冲后，线圈外相位严重畸变，而且线圈外锁定场强度急剧降低，来自探头材料的¹³C NMR背景信号无法有效地进行交叉极化.而对于被测样品甘氨酸来说，由于I核和S核之间强烈的偶极耦合作用，所加相位步进脉冲对锁定场强度的影响只有1.4%.     

基于FPGA的低场核磁共振谱仪脉冲编程器设计与实现

脉冲编程器在核磁共振(NMR) 谱仪中非常重要,具有产生脉冲序列所需的射频脉冲,控制回波信号的同步接收等功能. 基于FPGA的同步性能和时序控制功能,设计了低场NMR谱仪的脉冲编程器,可产生任意脉冲序列,实现脉冲频率、相位、幅度的灵活调节. 利用设计的脉冲编程器在0.540 Tesla均匀磁场下进行了CuSO₄溶液的T₁和T₂测量,得到高信噪比的NMR回波串.     

基于多弛豫信号补偿的快速磁共振T1ρ散布成像

定量磁共振成像（MRI）可量化组织特性,是科学研究和临床研究的重要工具.旋转坐标系下的自旋-晶格弛豫时间（T_1ρ）能反映水与大分子之间的低频交互作用,在3 T及以上的高场环境下,T_1ρ受水和不稳定质子之间化学交换的影响较大,通过测量弛豫率随自旋锁定场强度的变化而得到其分布情况（T_1ρ散布）,可用于分析和量化质子的交换过程,因此T_1ρ散布是一种重要的定量MRI技术.然而,获得不同自旋锁定场强下T_1ρ加权图像的时间过长,限制了其应用范围.针对这一问题,本研究提出一种基于多弛豫信号补偿策略的快速T_1ρ散布成像方法.该方法将不同锁定频率下的T_1ρ加权图像补偿到同一信号强度水平,并结合低秩与稀疏建立重建模型.实验结果表明,该方法在加速倍数高达7倍时仍获得了较好的重建结果.     

BaTi2Bi2O的电子结构与磁性

采用第一性原理方法,对BaTi₂Bi₂O的电子结构和磁性进行计算.非磁性态的计算结果显示:费米能级处的态密度主要来自d_z²,d_x²-y²和d_xy三个轨道,同时费米面也主要有三部分组成,并且将其沿着矢量q₁=(π/a,0,0)和q₂=(0,π/a,0)平移时,第三部分费米面(沿着X-R连线)与第一部分费米面(M-A连线)嵌套明显,计算得出磁化系数χ₀(q)在X点出现峰值,与峰值出现在M点的FeAs基超导体不同.上述磁化率峰值可以诱导产生自旋密度波,使得BaTi₂Bi₂O材料的磁性基态是bi-collinear antiferromagnetism(AF3)与blocked checkerboard antiferromagnetism(AF4)的二度简并态.随着空穴掺杂,χ₀(q)的峰值降低,而电子掺杂则导致峰值变大.当自旋涨落被完全压制时,超导出现,这可以解释为什么超导只出现在空穴掺杂型化合物而非电子掺杂型.     

用于土壤水分测量的磁共振射频线圈宽频匹配方法

准确检测土壤水分对于改善农业用水管理至关重要.为了实现土壤水分的准确测量,本文设计了一种微型inside-out核磁共振（NMR）传感器（测量区域位于传感器周围）.其中磁体由三个轴向磁化的圆柱磁体组成,射频线圈由四个相同的弧面螺旋线圈串联组成.通过调整圆柱体之间的半径和高度,获得了一个圆周对称恒定梯度场.并利用宽频带匹配方法,增加射频线圈的激励区域,从而提高整体信噪比.将本文设计的传感器用于测量含水量不同的小颗粒沙土和大颗粒石英砂土壤模型样品的CPMG（Carr-Purcell-Meiboom-Gill）信号,通过逆拉普拉斯变换获得了T₂分布谱,并将T₂谱峰面积与称重法获得的含水量进行了相关性分析,探讨了该传感器用于测量土壤水分的可行性.     

Pr0.7(Sr1-xCax)0.3MnO3多晶体系中的小极化子性质

采用基于柠檬酸体系的溶胶-凝胶法制备了Pr_0.7（Sr_1-xCa_x）_0.3MnO₃系列的多晶块材, 同时还用脉冲激光沉积技术（PLD）在SrTiO₃（100）衬底上外延生长了同一系列的薄膜, 系统研究了它们的晶格结构和电输运行为. 多晶和薄膜样品都具有正交晶格结构, 电输运行为在居里温度T_Ｃ以上的高温顺磁相都很好 关键词： 0.7（Sr_1-xCa_x）_0.3MnO₃')" href="#">Pr_0.7（Sr_1-xCa_x）_0.3MnO₃ 绝热小极化子模型 双交换作用 Jahn-Teller晶格畸变     

优化重聚脉冲提高梯度场核磁共振信号强度

缩短射频脉冲宽度, 有助于解决脉冲电力消耗大、样品吸收率高、信噪比低等极端条件核磁共振探测的关键问题. 本文首先分析射频脉冲角度对核磁共振自旋回波信号强度的影响机理, 基于Bloch方程推导了回波信号幅度与扳转角、重聚角的关系. 在特制核磁共振分析仪上采用变脉冲角度技术, 分别在均匀磁场和梯度磁场条件下实现对扳转角和重聚角与回波信号强度关系的数值模拟和实验测量. 结果表明, 梯度场中, 扳转角为90°、重聚角为140°的射频脉冲组合获得最大首波信号强度, 比180°脉冲对应的回波幅值提高13%, 能耗降低至78%. 选用该重聚角(140°) 优化设计饱和恢复脉冲序列探测流体的纵向弛豫时间T₁特性, 准确获得 T₁分布.该结果对于低电力供应、且对信噪比有较高要求的核磁共振测量, 如随钻核磁共振测井和在线核磁共振快速检测等, 具有重要意义. 关键词： 核磁共振 信号强度 重聚脉冲角度 Bloch方程     

在永磁体强磁场中Mn1.2Fe0.8P1-xSix系列化合物热磁发电研究

研究了处于永磁体强磁场中Mn_1.2Fe_0.8P_1-xSi_x 系列化合物的热磁发电性能, 采用高性能球磨和固相烧结合成方法制备了Mn_1.2Fe_0.8P_1-xSi_x 系列化合物, 并对该系列化合物的物相结构、磁性和热磁发电性能进行了测量. 结果表明: Mn_1.2Fe_0.8P_0.37Si_0.63和Mn_1.2Fe_0.8P_0.35Si_0.65化合物是具有Fe₂P型六角结构的一级相变软磁性材料, 两者居里温度分别为334 K和348 K, 处于工业余热温区. 根据一级相变磁性材料在居里温度磁化强度发生突变这一特性, 研制热磁发电演示装置, 测量了Mn_1.2Fe_0.8P_0.37Si_0.63和Mn_1.2Fe_0.8P_0.35Si_0.65这两种材料铁磁相变产生感应电流大小与线圈匝数、热磁发电材料质量、表面积、表面上温度梯度的关系. 研究结果表明, Mn_1.2Fe_0.8P_1-xSi_x系列化合物具有很好的热磁发电性能, 有望成为热磁发电候选材料.     

MRI评价药物投递性能方法研究

采用MRI评价自制肝组织特异性非离子型高分子磁共振造影剂在小鼠体内药物投递效果. 分别在注射造影剂后0.1 h、6 h、12 h、24 h及7天采集磁共振T₁加权图像. 所有扫描均在1.5T临床磁共振成像仪上完成, 以固定体线圈为射频发射线圈, 三英寸圆形表面线圈为信号接收线圈. 数据分析前采用线圈非均匀性校正和信号非稳定性校正进行预处理. 实验结果显示,线圈空间敏感性校正使得小鼠组织图像信号强度空间更加均匀,稳定性校正后使得图像数据更加准确可靠,MRI是一种在体评价顺磁性标记高分子化合物药物投递效果的有效方法.     

MHD数值模拟中清除伪磁场散度方法

针对全MHD (Magnetohydrodynamics)数值模拟中存在伪磁场散度的问题,发展了如下计算方法:基本格式基于八波对称形式方程组,补充相关源项以保持方程组守恒性,并采用投影方法辅助清除伪散度.投影方法中,基于有限体积方法求解三维Poisson方程.算例显示,对于光滑解析磁场,伪磁场散度得到有效清除;对于带激波高超声速MHD流动,全局投影下自由来流区域误差增大.提出一种局部投影方法,在高磁场散度区域进行投影.结果表明,最终流场收敛稳定,高磁场散度得到有效清除,而低散度区域散度不受影响.     

Dual Space Analyzing Based on Symmetry Properties for Phonons fo Si Quantum Dot

Phonon modes in spherical Si quantum dots (QDs) with up to 7.9 nm in diameter are calculated by using the projection operators of the group theory into valence force field model. The phonons of dot modes in each of five irreducible representations (symmetries) are classified by using a dual space analysis method. It is found that the bulk-like modes with localization radius much smaller than the dot's radius have clearly pronounced bulk specific-k point parentage, T_λ(n, k_BZ, K_cut), from specific part of the Brillouin zone (BZ) (Γ-derived, X-derived etc.) and from definite bulk band (one in six modes). In Si dots of all sizes, each specific bulk-like dot mode has specific symmetry. The bulk TO(Γ)-like and the bulk LO(Γ)-like dot modes always have T₂ and A₁ symmetries, respectively. Except the bulk-A(Γ)-like dot modes of which the frequencies blue-shift as the dot size reducing, the bulk-like Γ-derived LO and TO dot modes and bulk-like X-derived TA and LA dot modes red-shift in frequency with decreasing dot size. There is almost not LO/TO mixing for bulk-like modes. As for the surface-like modes localized at the periphery of the dot, their eigenmodes have not a dominant bulk specific-k point parentage or a dominant BZ parentage around some special point. They are a superposition of many bulk bands with k from all over the bulk BZ. They have much significant mode mixing than the bulk-like phonons. The classification of dot modes based on the symmetry of group theory will bring advantageous to the discussion of Ramam spectrum, electron-phonon interaction and other phonon-assisted effects in QDs.     

H, V and N nuclear magnetic resonance studies of structure and properties of vanadia supported on TiOx/SiO2

¹H magic-angle spinning nuclear magnetic resonance (MAS NMR) spectra of TiO_x/SiO₂ catalysts suggest the interaction of surface TiO_x. species with Si-OH groups of the silica. Simultaneously, Ti-OH groups from surface titania species appear. The distribution of TiO_x species over SiO₂ is non-uniform, since a considerable part of surface OH groups remains unreacted with supported titania. Supported vanadia species interact both with Si-OH and Ti-OH groups. ⁵¹V NMR spectra suggest the interaction of vanadia with supported titania species and show the non-uniform distribution of titania over the SiO₂ surface. Deposition of titania as well as vanadia produces strong electron-accepting (Lewis) sites which interact with the terminal N atom of adsorbed N₂O molecules, resulting in a downfield shift of the resonance in ¹⁵N NMR spectra. The acid strength of electron-accepting sites is similar in both cases. Only about 10% of the total amount of supported titania and vanadia create Lewis sites.     

Measurements of interaction cross sections and radii of He isotopes

Secondary beams of ³He, ⁴He, ⁶He, and ⁸He were produced through the projectile fragmentation of an 800 MeV/nucleon ¹¹B primary beam. Interaction cross sections (σ_I) of all He isotopes of 790 MeV/nucleon on Be, C, and Al targets were measured by a transmission-type experiment. The interaction nuclear radii of He isotopes R_I(He) = (σ_I/π)^1/2 − R _I(T) where R_I(T) is the radius of the target nucleus, have been deduced to be R_I(³He) = 1.59 ± 0.06 fm, R_I(⁴He) = 1.40 ± 0.05 fm, R_I(⁶He) = 2.21 ± 0.06 fm, and R_I(⁸He) = 2.52 ± 0.06 fm.     

ALT in the nucleon-nucleon polarized Drell-Yan process

We present a leading order (LO) estimate for the longitidinal-transverse spin asymmetry (A ) in the nucleon-nucleon polarized Drell-Yan process at RHIC and energies in comparison with A and A . A receives contribution from g₁, the transversity distribution h₁, and the twist-3 distributions g and h . For the twist-3 contribution we use the bag model prediction evolved to a high energy scale by the large-N_c evolution equation. We found that A (normalized by the asymmetry in the parton level) is much smaller than the corresponding A . Twist-3 contribution given by the bag model turned out to be negligible.     

Distance functions and statistics

This paper proves that the Riemannian distance function is maximal in the class of distance functions associated with the Riemannian metric tensor.

Secondly, it is proven that there exists a unique minimum of

on a complete Riemannian surface (M,g) with small curvature, small curvature change and injectivity radius +∞. Here p_iM and γ_v is the maximal geodesic with initial velocity v and 0<t₁<<t_m.     

Effective Response of Nonlinear Composite under External AC and DC Electric Field

A perturbation method is used to study effective response of nonlinear Kerr composites, which are subject to the constitutive relation of electric displacement and electric field, Dα=εαE＋xα｜E｜^2E. Under the external AG and DC electric field Eapp = Eα（1 ＋ sinωt）, the effective nonlinear responses and local potentials are induced by the cubic nonlinearity of Kerr materials at all harmonics. As an example in three dimensions, we have investigated this kind of nonlinear composites with spherical inclusions embedded in a host. At all harmonic frequencies, the potentials in inclusion and host regions are derived. Furthermore, the formulae of the effective linear and nonlinear responses are given in the dilute Iimit.     

Observation of giant magnetocaloric effect under low magnetic fields in EuTi_(1-x)Co_xO_3

The magnetic properties and magnetocaloric effect(MCE) in EuTi_(1-x)Co_xO_3(x = 0, 0.025, 0.05, 0.075, 0.1) compounds have been investigated. When the Ti~(4+) ions were substituted by Co2+ions, the delicate balance was changed between antiferromagnetic(AFM) and ferromagnetic(FM) phases in the EuTiO_3 compound. In EuTi_(1-x)Co_xO_3 system, a giant reversible MCE and large refrigerant capacity(RC) were observed without hysteresis. The values of -?S_M~(max) were evaluated to be around 10 J·kg~(-1)·K~(-1) for EuTi_(0.95)Co_(0.05)O_3 under a magnetic field change of 10 kOe. The giant reversible MCE and large RC suggests that EuTi_(1-x)Co_xO_3 series could be considered as good candidate materials for low-temperature and low-field magnetic refrigerant.